Every yearThe NEWSintroduces the latest heating equipment available for the upcoming winter season. The intent is to help contractors prepare for this busy period by doing the research that will help them distinguish between brands.
Like last year, this year’s Heating Showcase is split into two parts: commercial and residential. The commercial information is published in this issue, and the residential/light commercial products will be featured in the Sept. 15 issue. The coverage includes feature-specific information about each individual product as submitted by the manufacturers.
The showcase product grid (see PDF link at the bottom of this article) includes technical facts, such as unit tonnage, refrigerant type, efficiency rating, and capacity. The following photo feature provides more in-depth information on the features of each individual unit and also includes technical support information from the manufacturer.
The manufacturers provided all of the data included in both the product grid and photo feature. Please direct any questions to them via the contact information provided below.
AERCO
Model:Benchmark 1.5 low-NOx boilerFootprint (inches):36 (d) by 28 (w)
Serviceability features:Easier service requirements call for annual combustion calibration check and the replacement of spark ignitor and flame detector.
Technical support:Startup and service to be performed by factory-certified technicians.
Tech support materials:Comprehensive wiring diagrams, application guides, O&M manuals, etc., available on Website.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Supports sealed combustion.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Many parts common to this family of high-efficiency boilers.
Additional features:Condensing boiler features 20:1 turndown for a 75,000 to 1.5 million-Btuh range of noncycling operation.
Warranty information:Ten-year, prorated, limited pressure vessel/heat exchanger. Control panel conditionally warranted against failure for two years from shipment; all other components 18 months from shipment.
Special installation requirements:Refer to application guidelines and O&M manual on Website.
Contact:AERCO International, Northvale, N.J.; attn: Harold Krebs, 201-768-2400; 201-768-7789 (fax); info@aerco.com; www.aerco.com.
eProduct 160
American Standard
Model:YHC036E, YHC 048E, YHC060E packaged gas heating unitFootprint (inches):44 by 70 (3 ton) and 54 by 89 (4 and 5 ton)
Serviceability features:Available with stainless steel heat exchanger; onboard diagnostics feature built-in test mode; single side service access, all wiring is numbered and colored; patented easy-to-clean condenser coil, easy-to-clean foil-faced insulation.
Technical support:Contact local American Standard distributor.
Tech support materials:Available on ASDealerNet.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Double-sloped, cleanable, and reversible drain pan, foil-faced insulation, ability to hold 2-inch filters in standard filter rack.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts.
Additional features:One of the most efficient commercial packaged units available today.
Warranty information:One-year all parts, five-year compressor and heat exchanger.
Special installation requirements:None.
Contact:American Standard, Tyler, Texas; attn: Steve Spires, 903-266-3756; 903-509-7249 (fax); steven.spires@americanstandardair.com; www.americanstandardair.com.
eProduct 161
Arcoaire
Model:PGE072 package gas/electric unitFootprint (inches):74 (w) by 45 (l)
Serviceability features:Easily removable panels provide ready access to unit components for rapid removal or maintenance. Units feature integrated gas control board with diagnostics, fixed orifice metering devices to control refrigerant flow, and through-the-base utility connections capability.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Arcoaire dealer Website www.goarcoaire.com includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best-in-class ARI-listed outdoor sound ratings.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features tubular, dimpled gas heat exchangers that optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion. Refrigerant filter-driers are standard to help ensure system cleanliness and the ability to meet tough commercial specs. High- and low-pressure controls protect the system during extreme cooling operating conditions.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. HELP® extended service agreement program has several options on Arcoaire commercial products.
Special installation requirements:Highly reliable fixed-orifice metering devices provide optimum refrigerant control at all operating conditions.
Contact:Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.
eProduct 162
Footprint (inches):87 (w) by 58 (l)
Serviceability features:Easily removable panels provide access to unit components for removal or maintenance. Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining, sloping design.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level.
Tech support materials:Product information posted at the Arcoaire dealer Website (www.goarcoaire.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best in class ARI-listed outdoor sound ratings.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits to provide part-load cooling operation. Tubular, dimpled gas heat exchangers optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion. High- and low-pressure controls protect the system during extreme cooling operating conditions. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. HELP® extended service agreement program has several options on Arcoaire commercial products.
Special installation requirements:Highly reliable fixed orifice metering devices.
Contact:Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.
eProduct 163
Bard Manufacturing
Model:WF Series wall-mount gas furnaceFootprint (inches):25 (d) by 45 (h) by 38 (w)
Serviceability features:All service and maintenance is performed outside the building, consuming no interior floor space. Additional service features include factory or field installed ventilation package options, multispeed blower motor, 18-gauge stainless steel tubular heat exchanger, hinged service door allowing easier access to air filters, advanced in-shot burner design, versatility to satisfy ducted or nonducted application, Integrated DSI control.
Technical support:Available through Bard distribution network.
Tech support materials:Service parts guides, wiring diagrams, installation manuals (printed and CD), Website.
Noise-reduction features:Multispeed blower motors, advanced-design in-shot burners.
IAQ equipment supported:Ventilation options include energy recovery ventilator, commercial room ventilator.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares standard Bard replacement parts.
Additional features:The only wall-mount gas furnace on the market, the company said. Its space-saving design is ideal for versatile applications such as new construction, modular offices, school facilities, portable structures, retail stores, garages, and other commercial applications.
Warranty information:Five-year parts, 10-year heat exchanger.
Special installation requirements:Low-NOx models, high altitude kits, and Canadian-approved models available.
Contact:Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.
eProduct 164
Footprint (inches):27 (d) by 88 to 98 (h) by 42 (w)
Serviceability features:All service and maintenance performed outside the building, consuming no interior floor space. Additional service features include step capacity compressor, multispeed blower motor, high- and low-pressure switches. Ventilation package options are factory or field installed; 18-gauge stainless steel tubular heat exchanger; hinged service door allows easier access to air filters; advanced in-shot burner design; integrated DSI control; versatility to satisfy ducted or nonducted applications.
Technical support:Available through company’s distribution network.
Tech support materials:Service parts guides, wiring diagrams, installation manuals (printed and CD), Website.
Noise-reduction features:Step-capacity compressor, ECM indoor blower motor, advanced design in-shot burners.
IAQ equipment supported:Variety of ventilation options include energy recovery ventilator, economizer, commercial room ventilator.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares standard company replacement parts.
Additional features:Multistep capacity compressor uses green R-410A and ventilation package options. Its space-saving design is ideal for applications such as new construction, modular applications, school modernization, portable structures, retail stores, correctional facilities, and other commercial applications.
Warranty information:Five-year parts, 10-year heat exchanger.
Special installation requirements:Low-NOx models, high-altitude kits, Canadian-approved models available.
Contact:Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.
eProduct 165
Bryant Heating and Cooling
Model:Legacy™ rooftop (580J/558J)Footprint (inches):74 by 47 and 88 by 60
Serviceability features:Comes with a roomy control box; centralized service interaction on one terminal board; handled service panels; new “no-strip” screw technology; permanently attached, robust wiring diagrams; standardized components; and a removable service plug that allows a tech to read pressures with the panel on.
Technical support:Contact local rep.
Tech support materials:Parts lists, wiring diagrams, service and setup manual, installation instructions, product data.
Noise-reduction features:Fully insulated cabinet with belt-drive fan.
IAQ equipment supported:Economizer sensor and 2-inch filters.
Thermostat compatibility:Capable of supporting common, commercial thermostats.
Replacement parts compatibility:Designed with common parts.
Additional features:Designed with Puron® refrigerant. Keeping the same cabinet design with only a few changes from its predecessors, this rooftop unit is ideal for replacement opportunities.
Warranty information:Standard commercial warranty available with extended programs.
Special installation requirements:None.
Contact:Bryant Heating and Cooling, Louisville, Ky.; attn: Jennifer Morani, 502-554-2578; 860-660-3779 (fax); jennifer.morani@bryant.com; www.bryant.com.
eProduct 166
Burnham Hydronics
Model:MPC™ cast iron boilerFootprint (inches):42 (w) by 33 to 129 (d)
Serviceability features:Left or right burner swing door provides unobstructed access to combustion chamber and all flue passages for easier cleaning, along with two rear cleanout plates. Easy-to-install-and-remove jacket side panels interlock and mount to frame without screws. Built-in thermal shock protection eliminates need for external mixing devices or complicated piping saving installation time and money.
Technical support:Available through distributors and sales reps. Contractor technical support is available during normal business hours at 866-684-1463.
Tech support materials:Complete product information for contractors available in MPC I/O manual. Additional information and MPC video graphics modules available online at www.burnham.com.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with a wide variety of heating thermostats.
Replacement parts compatibility:Some components are standard; many replacement parts are common between the MPC models.
Additional features:Only American-made, three-pass sectional cast iron, commercial boiler with combustion efficiencies up to 89 percent and carries the UL listing, said the company. Has built-in thermal shock protection, a special-designed return water mixing tube and can operate at unprecedented 80°F minimum return water temperatures. Along with a rugged, modern-looking jacket design, the MPC is available with the SBC™ boiler control system.
Warranty information:One-year limited boiler and 10-year limited cast iron sections.
Special installation requirements:Burner door can be set for left or right opening. Conveniently located single, 4-inch supply and controls manifold. Concealed wiring chaseway hides wiring for clean appearance. Rugged, modern-looking jacket design includes 4-inch insulation and side panels that interlock and mount to frame without screws.
Contact:Burnham Hydronics, Lancaster, Pa.; attn: Ken Niemi, 717-390-4701; 717-293-5827 (fax); kniemi@burnham.com; www.burnham.com.
eProduct 167
Carrier
Model:WeatherMaker® (48/50 TC) rooftopFootprint (inches):74 by 47 and 88 by 60
Serviceability features:Designed with the contractor in mind, unit comes standard with a large, organized control box; standardized components; permanent troubleshooting drawings that won’t fade or smudge; a control center which centralizes service points into one convenient location; handled, easier-access panels; “no-strip” screw technology; and a removable service plug that simplifies taking refrigerant pressures. Fits on Carrier curbs dating back to 1986.
Technical support:Contact local Carrier expert or call 800-227-7437.
Tech support materials:Product data, wiring diagrams; service, controls, and commissioning manual; installation instructions and critical parts lists. Constant-volume rooftop units’ technical development program.
Noise-reduction features:Fully insulated cabinet with belt-drive fan.
IAQ equipment supported:Economizer sensors, high-intensity UVC lights, 2-inch filters.
Thermostat compatibility:Capable of supporting common, commercial thermostats; common space sensors; or building automation systems (CCN, .BACnet, Modbus®1, Johnson Controls N2, and LonWorks®2).
Replacement parts compatibility:Designed with common parts.
Additional features:This rooftop unit, designed with Puron® and Carrier’s installed base with the same footprint and only minimal changes to the size and weight, is a perfect fit for replacements. With many factory-installed options available, from air management to smoke detectors, installation is easier.
Warranty information:Standard commercial warranty available with extended programs.
Special installation requirements:None.
Contact:Carrier, Louisville, Ky.; attn: Jennifer Morani, 502-554-2578; 860-660-3779 (fax); jennifer.morani@carrier.utc.com; www.carrier.com.
eProduct 168
Century
Model:PHG Series package heat pumpFootprint (inches):83 (w) by 84 (l)
Serviceability features:Easily removed blower, electric heat, filter and compressor/control access panels for simpler service and maintenance; externally mounted refrigerant ports to simplify diagnostics.
Technical support:Technical support available at 517-787-2100, 8 a.m.-5 p.m. Eastern.
Tech support materials:I/O manual and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.
Noise-reduction features:Scroll compressors for quiet operation.
IAQ equipment supported:One-piece indoor top cover and one-piece drawn base for superior water management; antibacterial, noncorrosive drain pan and factory-installed 2-inch filters all contribute to indoor air quality.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Common cabinet and components parts.
Additional features:Self-contained, compact, air-to-air heat pump can be mounted on slab or on the roof; field-convertible horizontal and vertical airflow for installation flexibility; enhanced fin design provides efficiency; galvanized steel cabinet has powder coat finish that meets 1,000-hour salt spray test; louvered panels protect the coils.
Warranty information:One-year (see printed warranty for limitations). AssurancePlus™ extended service agreements available.
Special installation requirements:Can be rooftop or slab mounted. Comes with full-perimeter, forkable baserails for handling.
Contact:Century, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.
eProduct 169
Footprint (inches):76 (w) by 48 (d)
Serviceability features:Integrated blower-burner control board with built-in diagnostics; numbered and color-coded wiring; hinged access panels and front access; slide-out blower; externally mounted refrigerant ports.
Technical support:Available at 517-787-2100, 8 a.m.-5 p.m. Eastern.
Tech support materials:I/O manual (with troubleshooting guide) and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.
Noise-reduction features:Solid-state direct-spark ignition with remote flame sensor; scroll compressors for quiet operation in cooling mode.
IAQ equipment supported:One-piece top on the indoor section has drip lip, drawn painted base pan, and 1-inch raised flanges for supply-return air connection for water management. Comes with two factory-installed 1-inch filters; can accommodate 2-inch filters.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Common cabinet and component parts.
Additional features:Aluminized steel heat exchanger with in-shot burners; direct- or belt-drive options can accommodate most design conditions; standard freezestat protection; corrosion-resistant plastic condensate pan; convertible horizontal and vertical airflow design for installation flexibility; cabinet finish meets 1,000-hour salt spray test.
Warranty information:Ten-year heat exchanger, one-year other parts (see printed warranty for limitations). AssurancePlus™ extended service agreements available.
Special installation requirements:Can be rooftop or slab mounted. Comes with full-perimeter, forkable baserails with lifting holes for handling.
Contact:Century, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.
eProduct 170
Cleaver-Brooks
Model:Clearfire CFC full condensing package boilerFootprint (inches):Manufacturer did not specify.
Serviceability features:This single-pass, down-fired stainless steel full condensing boiler is CSA certified and listed from 500,000-Btuh input through 2,500,000-Btuh input. Utilizing a premix burner with metal fiber head provides NOx emissions of <20 ppm, noise emission of <70 dBA, and 5:1 turndown modulation. Operating efficiency is 99 percent in full condensing mode.
Technical support:Visit www.cleaver-brooks.com to find a sales, parts, or service rep.
Tech support materials:For boiler book specs, visit www.cbboilers.com.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Manufacturer did not specify.
Warranty information:Manufacturer did not specify.
Special installation requirements:Manufacturer did not specify.
Contact:Cleaver-Brooks, Milwaukee; attn: Alan Wedal, 800-250-5883; 414-577-3159 (fax); info@cleaver-brooks.com; www.cleaver-brooks.com.
eProduct 171
ClimateMaster
Model:TMW050 water-to-water heat pumpFootprint (inches):Manufacturer did not specify.
Serviceability features:Access to the refrigeration circuit and electrical control panel is located at the front of the unit.
Technical support:Manufacturer did not specify.
Tech support materials:Manufacturer did not specify.
Noise-reduction features:Dual-isolated compressor mounting system and heavy-gauge steel cabinet help make the TMW Series the quietest, large-capacity, water-to-water heat pump on the market, said the company.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Manufacturer did not specify.
Warranty information:Manufacturer did not specify.
Special installation requirements:Manufacturer did not specify.
Contact:ClimateMaster, Oklahoma City; attn: Bridgett Oliver, 405-745-6000; 405-745-4102 (fax); boliver@climatemaster.com; www.climatemaster.com.
eProduct 172
Footprint (inches):Manufacturer did not specify.
Serviceability features:Manufacturer did not specify.
Technical support:Manufacturer did not specify.
Tech support materials:Manufacturer did not specify.
Noise-reduction features:Compressors are mounted on vibration isolation springs to a heavy-gauge mounting plate, which is then isolated from the cabinet base for maximized vibration and sound attenuation.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most heat pump thermostats.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:The award-winning Tranquility Series raises the bar for water-source heat pump efficiencies, features, and application flexibility. Not only does it exceed ASHRAE 90.1 efficiencies, it also uses EarthPure® HFC 410A zero-ozone-depletion refrigerant, making it an extremely environmentally-friendly option.
Warranty information:Manufacturer did not specify.
Special installation requirements:Manufacturer did not specify.
Contact:ClimateMaster, Oklahoma City; attn: Bridgett Oliver, 405-745-6000; 405-745-4102 (fax); boliver@climatemaster.com; www.climatemaster.com.
eProduct 173
Coleman
Model:Echelon™ Series packaged heating-cooling unitsFootprint (inches):49 (l) by 47 (w) by 34 or 42 (h)
Serviceability features:A large, single panel covers the electrical and gas controls, making servicing easier. The blower compartment has an additional large panel with a built-in handle that, when removed, allows the blower assembly to slide out for maintenance and troubleshooting.
Technical support:Manufacturer did not specify.
Tech support materials:A technical guide is available at www.upgnet.com or by request.
Noise-reduction features:The upward airflow carries normal operating noise up and away from the living area. The rigid top panel isolates any motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. The formed base pan also aids in sound alterations with its super-structure design, which strategically places embossments in the pan for optimum strength and rigidity.
IAQ equipment supported:The unit can be matched with Coleman’s line of premium indoor air quality products that includes hybrid electronic air cleaners, media air cleaners, UV lights, and humidifiers.
Thermostat compatibility:A wide selection of compatible thermostats provides optimum performance and features.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This low-profile unit features a coil design that includes grooved copper tubes and enhanced aluminum fin construction that improves heat transfer for efficiency and durability. All models share a common, compact cabinet in a single footprint and feature field-convertible duct connections.
Warranty information:Twenty-year warranty on the heat exchanger, 10 years on the compressor, and five years on the parts for a single-phase unit; 10 years on the heat exchanger, five years on the compressor, and one year on parts for a three-phase unit.
Special installation requirements:Installation time and costs are reduced by easier power and control wiring connections. Utility connections can be made quickly with a minimum amount of field labor, and a convertible airflow design allows maximum field flexibility and minimum inventory. The small base requires less space on the roof or ground.
Contact:Coleman, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.switchtocolemanac.com.
eProduct 174
Comfort-Aire
Model:HRG090 to HRG120 Series heat pumpFootprint (inches):80 (w) by 31 (d)
Serviceability features:Removable panel doors and externally located sweat connections provide fast, easier access for service or maintenance.
Technical support:Technical support available at 517-787-2100, 8 a.m.-5 p.m. Eastern.
Tech support materials:I/O manual and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.
Noise-reduction features:Remote mounting of the heat pump keeps operational sound outside, while vertical discharge fans carry the sound up and away from the surrounding area.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Many common cabinet and component parts.
Additional features:Air-cooled system eliminates the need for water or sewer connections and any related water treatment; time- and temperature-initiated defrost; reversing valve is sized for maximum capacity and efficiency; coils are constructed with copper tubes and aluminum fins; scroll compressor has high-temperature protection and is mounted on isolators to reduce vibration.
Warranty information:One year (see printed warranty for limitations). AssurancePlus™ extended service agreements available.
Special installation requirements:Can be rooftop or slab mounted. Comes with a forkable baserail for easier handling. Available in 208/230-V and 460-V models.
Contact:Comfort-Aire, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 175
Footprint (inches):94 (w) by 59 (d) to 146 (w) by 59 (d)
Serviceability features:Solid-state controls with diagnostic LED; large control panel with numbered and color-coded wiring; hinged access panels and front access; slide-out blower; externally mounted refrigerant ports.
Technical support:Technical support available at 517-787-2100, 8 a.m.-5 p.m. Eastern.
Tech support materials:I/O manual (with troubleshooting guide) and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.
Noise-reduction features:Solid-state direct-spark ignition; scroll compressors for quiet operation in cooling mode.
IAQ equipment supported:A one-piece top on the indoor section and sloped antibacterial drain pan provide superior water management. Base pan insulation mounted on the bottom helps eliminate corrosion and improve indoor air quality. Also includes factory-installed 2-inch filters.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Many common cabinet and component parts.
Additional features:Two-stage gas valve and two-stage cooling; multiple inducers allow 81 percent steady-state efficiency at high and low stage; convertible horizontal and downflow airflow for flexibility in the field; belt-drive blower with optional direct drive for application flexibility; prewired to accept plug-in economizer; cabinet finish meets 1,000-hour salt spray test.
Warranty information:Ten-year heat exchanger, one-year other parts (see printed warranty for limitations). AssurancePlus™ extended service agreements available.
Special installation requirements:Can be rooftop or slab mounted. Comes with full-perimeter, forkable, riggable baserails with protective fork boards for handling.
Contact:Comfort-Aire, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 176
Comfortmaker
Model:PGE072 package gas/electric unitFootprint (inches):74 (w) by 45 (l)
Serviceability features:Easily removable panels provide access to unit components for rapid removal or maintenance. Units feature integrated gas control board with diagnostics, fixed orifice metering devices to control refrigerant flow, and through-the-base utility connections capability.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Comfortmaker dealer Website (www.gocomfortmaker.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best-in-class, ARI-listed outdoor sound ratings.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the product line.
Additional features:ASHRAE 90.1-compliant unit features tubular, dimpled gas heat exchangers to optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. High- and low-pressure controls provide system protection for extreme cooling operating conditions.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Comfortmaker commercial products.
Special installation requirements:Highly reliable fixed orifice metering devices provide optimum refrigerant control at all operating conditions.
Contact:Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.
eProduct 177
Footprint (inches):87 (w) by 58 (l)
Serviceability features:Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining, sloping design. Removable panels provide access to unit components for rapid removal or maintenance.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Comfortmaker dealer Website (www.gocomfortmaker.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best-in-class ARI-listed outdoor sound ratings.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the product line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits to provide part-load cooling operation. Tubular, dimpled gas heat exchangers optimize heat transfer for efficiency. Induced-draft fan for gas combustion. High- and low-pressure controls provide system protection for extreme cooling operating conditions. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Comfortmaker commercial products.
Special installation requirements:Highly reliable fixed orifice metering devices provide optimum refrigerant control at all operating conditions.
Contact:Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.
eProduct 178
Daikin AC (Americas) Inc.
Model:VRV III; Heat pump models: RXYQ__P Series; heat recovery models: REYQ__P Series and REMQ__P SeriesFootprint (inches):66 (h) by 36 (w) by 30 (d) on 6- to 20-ton units
Serviceability features:Advanced, self-diagnostic autocheck function will detect a malfunction and immediately display the type and location so it can be resolved quickly and effectively. Refrigerant autocharge function.
Technical support:Available at 972-245-1510, Monday-Friday, 8:30 a.m.-5 p.m. For more information, visit www.daikinac.com or call 866-432-4546.
Tech support materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide spec sheets.
Noise-reduction features:Night-time quiet mode can be selected automatically, manually, or a combination of both. In automatic mode, the low noise operation mode initiates eight hours after the peak temperature in the daytime; normal operation resumes 10 hours after that.
IAQ equipment supported:Some indoor fan coils feature an air purification filter with photocatalytic deodorizing function.
Thermostat compatibility:Zone LCD remote controller for up to 16 zones, provides a host of operational functions, inducing seven-day programmability. Connects to the I-Touch Intelligent Controller and I-Manager. Can be integrated via Daikin BACnet and LONworks gateways.
Replacement parts compatibility:Shares parts.
Additional features:Redesigned for applications in taller/larger buildings with 460-V capability (208-230 V is available). Longest pipe lengths in its product class (total piping is now 3,280 feet), said the company. Advanced zoning capabilities. Can operate up to 41 indoor fan coil units from one pipe network. A full array of ducted and duct-free fan coil units, including a new 2- by 2-foot multiflow ceiling cassette.
Warranty information:Six-year compressor, one-year parts, one-year labor.
Special installation requirements:R-410A certification. Daikin factory training. Standard Daikin installation instructions. Service space and piping limitations must be followed as described in the engineering data book.
Contact:Daikin AC (Americas) Inc., Carrollton, Texas; attn: Marc Bellanger, 972-245-1510; 972-245-1038 (fax); marc.bellanger@daikinac.com; www.daikinac.com.
eProduct 179
Footprint (inches):40 (h) by 31 (w) by 22 (d) for a single unit.
Serviceability features:Advanced, self diagnostic autocheck function detects a malfunction and immediately displays the type and location so it can be resolved quickly and effectively.
Technical support:Available at 972-245-1510, Monday-Friday, 8:30 a.m.-5 p.m. For more information, visit www.daikinac.com or call 866-432-4546.
Tech support materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide spec sheets.
Noise-reduction features:FXFQ indoor unit has a sound pressure level as low as 28 dBa and the RWEYQ condensing unit as low as 50 dBa.
IAQ equipment supported:Some indoor fan coil units feature an air purification filter with photocatalytic deodorizing function.
Thermostat compatibility:Zone LCD remote controller for up to 16 zones, which provides a host of operational functions, including seven-day programmability. Connects to Daikin’s I-Touch Intelligent Controller and Intelligent Manager for total building control. Can be integrated via Daikin BACnet and LONworks gateways.
Replacement parts compatibility:Shares parts.
Additional features:Energy-saving, water-cooled VRV technology in a compact and lightweight design. The unit is only 330 pounds and 40 inches high. The system keeps running costs low by controlling each zone individually and being able to shut down completely in unoccupied areas. Connects to a cooling tower (closed-loop) and boiler system.
Warranty information:Six-year compressor, one-year parts, one-year labor.
Special installation requirements:R-410A certification. Daikin factory training. Standard Daikin installation instructions. Service space and piping limitations must be followed as described in the engineering data book.
Contact:Daikin AC (Americas) Inc., Carrollton, Texas; attn: Marc Bellanger, 972-245-1510; 972-245-1038 (fax); marc.bellanger@daikinac.com; www.daikinac.com.
eProduct 180
Day & Night
Model:PGE180-240 package rooftopFootprint (inches):91 (w) by 86 (l)
Serviceability features:Units feature through-the-base utility connections capability, TXV refrigerant metering devices to control refrigerant flow, and integrated gas control board with diagnostics. Easily removable panels provide access to unit components for rapid removal or maintenance.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Day & Night dealer Website (www.godayandnight.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the product line.
Additional features:ASHRAE 90.1-compliant unit features tubular, dimpled gas heat exchangers to optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion. Independent cooling circuits provide part-load cooling operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. High- and low-pressure controls provide system protection for extreme cooling operating conditions.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Day & Night commercial products.
Special installation requirements:TXV are used on each refrigerant circuit to provide optimum refrigerant part-load control.
Contact:Day & Night, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.godayandnight.com.
eProduct 181
Footprint (inches):91 (w) by 86 (l)
Serviceability features:Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining, sloping design. Removable panels provide access to unit components for rapid removal or maintenance.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Day & Night dealer Website (www.godayandnight.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:Energy Star-compliant unit features two independent cooling circuits to provide part-load cooling operation. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low-load operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. High- and low-pressure controls provide system protection for extreme cooling operating conditions.
Warranty information:Five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Day & Night commercial products.
Special installation requirements:Capillary tubes are used on each refrigerant circuit to provide optimum refrigerant management for heat pump duty.
Contact:Day & Night, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.godayandnight.com.
eProduct 182
Friedrich Air Conditioning
Model:TwinTemp heat pumpFootprint (inches):Sleeve measures 20 (h) by 28 (w) by 34 (d)
Serviceability features:Slide-out chassis for easier access for maintenance and repair. Easy-grip front-mounted pull strap makes sliding the chassis out of the sleeve easier and more convenient. Washable antimicrobial air filter. Manual control knobs.
Technical support:Available at 800-541-6645, 8 a.m.-4:30 p.m. Central.
Tech support materials:I/O manual, service manual, parts manual, sales literature.
Noise-reduction features:Vibration-isolating design; protective motor mount to prevent metal-on-metal contact; solid steel blower wheel housing; quiet airflow design; insulated plenum.
IAQ equipment supported:Seven pints/hour moisture removal; eight-way airflow controls produce 600-cfm air circulation; washable antimicrobial air filters for protection against fungal and bacterial growth; functional fresh air intake and stale air exhaust vents feature the largest openings in the industry allowing for the greatest amount of air mixing; vents are screened to prevent debris and insects from intruding.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Some shared parts.
Additional features:Largest window-type/through-the-wall heat pump on the market, said the company. Features include defrost control; three cooling and three heating speeds plus a fan-only setting; heat-anticipating thermostat for added comfort; MoneySaver setting saves energy during operation; 16-gauge steel, extra-deep base pan; advanced airflow design; heavy-duty expanded aluminum rear grille protects and conceals outdoor coil; antitheft chassis retaining wire; consistent chassis dimensions for easier replacement; heavy-duty mounting hardware blocks out more external sound and light; and enclosed motors.
Warranty information:One-year parts, five-year compressor.
Special installation requirements:Appropriate for some through-the-wall applications. See specs in sales brochure for additional information.
Contact:Friedrich Air Conditioning, San Antonio, Texas; attn: Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.
eProduct 183
Footprint (inches):23 (w) by 23 (d) by 32 to 47 (h)
Serviceability features:Installs front, left-, or right hand into closet for easier access. All units are prewired, charged, and piped so only electrical and condensate hookup is needed for installation. All units ship with return air filter installed. Easier-to-connect right or left drain connection; 10-inch crimped and beaded duct collar ready to attach flex duct.
Technical support:Available at 800-541-6645, 8 a.m.-4:30 p.m. Central.
Tech support materials:I/O manual, service manual.
Noise-reduction features:Entire unit cabinet is fully insulated. Installs in a typical mechanical closet, which may be insulated for even better sound reduction. Compressor is mounted on vibration isolators. Accessory return air panels mount in multiple positions for increased sound dampening.
IAQ equipment supported:Built-in damper can provide at least 60 cfm of fresh air.
Thermostat compatibility:Factory equipped for connection to a standard 24-V, single-stage, heat-cool thermostat. Friedrich RT4 digital thermostat is available as an accessory. New for 2008, Vert-I-Pak has a two-speed fan for additional thermostat programming options.
Replacement parts compatibility:Some shared parts.
Additional features:New for 2008, all units have Diamonblue corrosion protection for added durability and longer life. Also new is the two-speed fan operation from a remote thermostat. Vert-I-Pak’s concealed installation and ductability create a more attractive, home-like room design while allowing conditioning of multiple rooms via ducts. This is a completely self-contained unit with no outside condensing unit and no lines running from floor to floor. Compact and lightweight.
Warranty information:One-year parts, five-year compressor.
Special installation requirements:Installs on an exterior wall.
Contact:Friedrich Air Conditioning, San Antonio, Texas; attn: Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.
eProduct 184
Goodman Global
Model:CPG Series package unitFootprint (inches):Manufacturer did not specify.
Serviceability features:Easier compressor access and standard 2-inch removable filters.
Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday, at 888-593-9988. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.
Tech support materials:CPG spec sheet, installation manual, operations manual, technical manual, and service manuals.
Noise-reduction features:Fully insulated.
IAQ equipment supported:Compatible with a full line of Goodman brand air quality accessories.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares many common components with other Goodman brand products.
Additional features:Features environmentally friendly R-410A and the patented Tuff Tube™ dual-diameter tubular heat exchanger. These units are housed in a heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish.
Warranty information:Twenty-year limited heat exchanger, five-year limited parts.
Special installation requirements:Manufacturer did not specify.
Contact:Goodman Global, Houston; attn: Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.goodmanmfg.com.
eProduct 185
Footprint (inches):Manufacturer did not specify.
Serviceability features:Single-point entry to wiring; standard removable 2-inch filters; easier compressor access.
Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday, at 888-593-9988. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.
Tech support materials:CPH Series spec sheet, installation manual, operations manual, technical manual, and service manuals.
Noise-reduction features:Fully insulated.
IAQ equipment supported:Compatible with a full line of Goodman brand air quality accessories.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares many common components with other Goodman brand products.
Additional features:This self-contained package heat pump features easier installation and serviceability. Other features include a high-efficiency scroll compressor and a high-capacity, steel-cased filter-drier. The unit is housed in a heavy-gauge, galvanized-steel cabinet with UV-resistant powder-paint finish.
Warranty information:Twenty-year limited heat exchanger, five-year limited compressor, five-year limited parts.
Special installation requirements:Manufacturer did not specify.
Contact:Goodman Global, Houston, Texas; attn: Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.goodmanmfg.com.
eProduct 186
Heil
Model:PGE180-240 package rooftopFootprint (inches):91 (w) by 86 (l)
Serviceability features:Easily removable panels provide access to unit components for rapid removal or maintenance. Units feature through-the-base utility connections capability, TXV refrigerant metering devices, and an integrated gas control board with diagnostics.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the dealer Website (www.goheil.com) includes spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits to provide part-load cooling operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. High- and low-pressure controls protect system in extreme cooling operating conditions. Tubular, dimpled gas heat exchangers optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion.
Warranty information:Ten-year limited heat exchanger, five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on Heil commercial products.
Special installation requirements:TXVs are used on each refrigerant circuit to provide optimum refrigerant part-load control.
Contact:Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goheil.com.
eProduct 187
Footprint (inches):120 (w) by 86 (l)
Serviceability features:Easily removable panels provide ready access to unit components for removal or maintenance. Units feature through-the-base utility connections capability, TXV refrigerant metering devices to precisely control refrigerant flow, and integrated gas control board with diagnostics.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the dealer Website (www.goheil.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits to provide part-load cooling operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low-load operation. High- and low-pressure controls protect the system in extreme cooling operating conditions.
Warranty information:Ten-year limited heat exchanger; five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Heil commercial products.
Special installation requirements:TXVs on each refrigerant circuit provide optimum refrigerant part-load control.
Contact:Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goheil.com.
eProduct 188
ICP Commercial
Model:PGH 300 package rooftopFootprint (inches):169 (w) by 86 (l)
Serviceability features:Easily removable panels provide ready access to unit components for removal or maintenance. Units feature through-the-base utility connections capability, TXV refrigerant metering devices to precisely control refrigerant flow, and integrated gas control board with diagnostics.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the ICP Commercial dealer Website (www.goicpcommercial.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:Energy Star®-compliant unit features tubular, dimpled gas heat exchangers to optimize heat transfer for improved efficiency. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low load operation. Factory-installed options include high static motors and drives, economizer with separate barometric relief, nonfused disconnect, field-powered 115-V convenience outlet supply and return air smoke detector, copper finned outdoor coil, and manual outdoor dampers.
Warranty information:Ten-year limited heat exchanger, five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on ICP Commercial products.
Special installation requirements:TXVs are used on each refrigerant circuit to provide optimum refrigerant part-load control.
Contact:ICP Commercial, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goicpcommercial.com.
eProduct 189
Footprint (inches):91 (w) by 86 (l)
Serviceability features:Easily removable panels provide ready access to unit components for removal or maintenance. Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining sloping design. TXV refrigerant metering devices control refrigerant flow.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the ICP Commercial dealer Website (www.goicpcommercial.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:Energy Star® efficiency; also meets ASHRAE 90.1 requirements. Unit features two independent cooling circuits to provide part-load cooling operation. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low-load operation. Factory-installed options include high static motors and drives, convenience outlet, economizer with controller, and copper finned outdoor coil.
Warranty information:Five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on ICP Commercial products.
Special installation requirements:Capillary tubes are used on each refrigerant circuit to provide optimum refrigerant management for heat pump duty.
Contact:ICP Commercial, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goicpcommercial.com.
eProduct 190
International Environmental Corp. (IEC)
Model:Universal modular high-rise unit hydronic hot water or electric heaterFootprint (inches):17 by 17; 20 by 20; 24 by 24
Serviceability features:Units have been designed for serviceability with a unit disconnect switch for safety. All internal components are accessible through the front of the unit. Removable motor and blower assembly. Interior surfaces utilize cleanable insulation. Removable and cleanable drain pan. Tool-less filter removal.
Technical support:Available at 800-226-5406, 8 a.m.-5 p.m. Central.
Tech support materials:See www.iec-okc.com for all technical support literature (technical catalogs, I/O manuals, sales brochures, sales flyers, wiring diagrams, mechanical specs, mechanical submittal drawings, parts lists, etc.).
Noise-reduction features:IEC offers a number of noise reduction features including a variety of insulation types and densities, ECM motor package, multispeed motors, heavy-gauge cabinet options, etc.
IAQ equipment supported:IAQ features include fresh/outside air option, removable multispeed motor/blower assembly, cleanable insulation, removable and cleanable drain pan, noise-reduction options, ECM motor option, and filter options (pleated, HEPA).
Thermostat compatibility:Compatible with any fan coil thermostat. The company offers both 24-V programmable and nonprogrammable thermostats.
Replacement parts compatibility:Shares replacement parts with standard modular (MPY) high-rise fan coil line.
Additional features:Specifically designed for the retrofit replacement market, these units are easily field converted into most conventional configurations. Manufacturing lead times for these units are shorter to minimize jobsite downtime.
Warranty information:Twelve months after startup or 18 months from shipment.
Special installation requirements:Contractors no longer have to order specific unit configurations because the company’s flexible knockout design allows them to easily convert units to a specific configuration in the field.
Contact:International Environmental Corp. (IEC), Oklahoma City; attn: Glynn Crutsinger, 405-605-5129; 405-605-5001 (fax); crutsinger@iecokc.com; www.iec-okc.com.
eProduct 191
Lennox Industries
Model:LF24 unit heatersFootprint (inches):15 by 24 to 41 by 41
Serviceability features:The entire burner assembly can be removed in one piece for service. The wiring junction box is located on the side of the cabinet for easier access. Box contains all electrical and safety controls.
Technical support:Available at 800-453-6669, 6:30 a.m.-6:30 p.m. Central.
Tech support materials:Engineering handbook, installation instructions, wiring diagrams, product brochures are available immediately.
Noise-reduction features:Dynamically balanced direct-drive propeller fans offer quiet, smooth operation. Heated air flows smoothly across the tubular heat exchangers and is directed into the heated space by aerodynamic louvers.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most conventional and programmable thermostats.
Replacement parts compatibility:All models share replacement parts; many components are commonly available.
Additional features:Tubular heat exchangers are constructed of aluminized or stainless steel for resistance to corrosion and oxidation. Rounded tubular heat exchange surfaces promote excellent heat transfer while creating less airflow resistance and great throw distance of heated air. Compact design reduces space requirements. Units can be vented vertically or horizontally.
Warranty information:Fifteen-year limited stainless steel heat exchanger, 10-year limited aluminized heat exchanger, one-year limited covered components.
Special installation requirements:3/8-inch spot nuts are located on the top of the cabinet for suspending units for easier installation. Single-fan models have two-point suspension; two-fan models have four-point suspensions.
Contact:Lennox Industries, Dallas; attn: Jeff Hartnett, 972-497-5000; 972-497-6999 (fax); jeff.hartnett@lennoxind.com; www.lennox.com.
eProduct 192
LG Electronics USA
Model:Multi V Plus II Series heat pumpFootprint (inches):1,446-square-inch outside unit
Serviceability features:“Pump down and pump out” function collects refrigerant during service. One-touch detachable panel of four-way cassette indoor unit allows easier service and installation.
Technical support:Available at 888-865-3026, Monday-Friday, 8 a.m.-8 p.m. Eastern.
Tech support materials:Engineering Product Data Book (wiring diagrams, service/troubleshooting info, installation data) will be provided from Website (www.lgeaircon.com).
Noise-reduction features:Night-silent operation/BLDC fan motor in indoor unit reduces noise.
IAQ equipment supported:Neo-plasma air-purifying system is equipped with seven specialized filters in five separate stages to enhance its cleaning power. Dehumidification mode reduces uncomfortable humidity from the room without overcooling.
Thermostat compatibility:Compatible with LonWorks and BNUnet. LG dedicated thermostats are required.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The 460-V outdoor unit is available for industrial application.
Warranty information:Six-year compressor, one-year parts.
Special installation requirements:Check gas leakage after installation of refrigerant piping.
Contact:LG Electronics USA, Englewood Cliffs, N.J.; attn: Steve Schmitt, 913-338-4278 (fax); sschmitt@lge.com; www.lgusa.com.
eProduct 193
Footprint (inches):1,446-square-inch outside unit
Serviceability features:“Pump down and pump out” function to collect refrigerant while servicing. Automatic backup function - before changing failed compressor, it operates automatically with another operable compressor. One-touch detachable panel of four-way cassette indoor unit gives easier service and installation.
Technical support:Available at 888-865-3026, Monday-Friday, 8 a.m.-8 p.m. Eastern.
Tech support materials:Engineering Product Data Book (wiring diagrams, service/troubleshooting info, installation data) provided from Website (www.lgeaircon.com).
Noise-reduction features:Night-silent operation/BLDC fan motor in indoor unit reduces noise.
IAQ equipment supported:Neo-plasma air-purifying system is equipped with seven specialized filters in five separate stages to enhance its cleaning power. Dehumidification mode reduces uncomfortable humidity from the room without overcooling.
Thermostat compatibility:Compatible with LonWorks and BNUnet. LG dedicated thermostats are required.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This system can operate cooling and heating simultaneously with single outdoor unit.
Warranty information:Six-year compressor, one-year parts.
Special installation requirements:Check gas leakage after installation of refrigerant piping.
Contact:LG Electronics USA, Englewood Cliffs, N.J.; attn: Steve Schmitt, 913-338-4278 (fax); sschmitt@lge.com; www.lgusa.com.
eProduct 194
Lochinvar Corp.
Model:Knight XL modulating/condensing boilerFootprint (inches):419-701 square inches
Serviceability features:The Smart System™ operating control provides easier, flexible monitoring, diagnostics, and adjustment of system operation during installation or service. Two-line, 16-character display shows setup and diagnostic information in words, not codes. Front and top panels can be quickly removed without tools for easier access to internal components and electrical connections.
Technical support:Available at technicalservice@lochinvar.com.
Tech support materials:At www.lochinvar.com, contractors have immediate access to I/O manuals, service manuals, user manuals, a complete product brochure, product summary, replacement parts list, plan view drawings, sequencer information, spec sheets, and submittal forms.
Noise-reduction features:Remarkably quiet operation.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Replacement parts are compatible across the entire Knight product line, 50,000-800,000 Btuh.
Additional features:With 94.6 percent thermal efficiency, low-NOx emissions, and a fully modulating burner with 5:1 turndown, this is the ideal “green choice” for today’s environmentally focused market, the company said. Equipped with the Smart System control and available in five models (399,000-800,000 Btuh input), the Knight XL features a built-in cascading sequencer for the installation of up to eight units, delivering up to 6.4 million-Btuh heating capacity. Other features include lightweight, compact design and ASME stainless steel heat exchanger.
Warranty information:Ten-year limited covers heat exchanger for leakage, thermal shock, or other malfunctions caused by defects in materials and/or workmanship. One-year all parts. Five-year parts and labor extended warranty is available.
Special installation requirements:Venting can be made with PVC, CPVC, or AL294-C stainless steel vent materials. The compact and lightweight design makes the placement and installation of the unit easily manageable by a single man with a hand truck, the company says.
Contact:Lochinvar Corp., Lebanon, Tenn.; attn: Stirling Boston, 615-889-8900; 615-547-1000 (fax); lochinvar@lochinvar.com; www.lochinvar.com.
eProduct 195
Luxaire
Model:Acclimate™ Series package heating-cooling unitsFootprint (inches):49 (l) by 47 (w) by 34 or 42 (h)
Serviceability features:A large, single panel covering the electrical and gas controls makes servicing easier. The blower compartment has an additional large panel with a built-in handle that, when removed, allows the blower assembly to slide out for maintenance and troubleshooting.
Technical support:Manufacturer did not specify.
Tech support materials:A technical guide is available at www.upgnet.com or by request.
Noise-reduction features:The upward airflow carries normal operating noise up and away from the living area. The rigid top panel effectively isolates any motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. The formed base pan also aids in sound alterations with its super-structure design. This design strategically places embossments in the pan for optimum strength and rigidity.
IAQ equipment supported:The unit can be matched with Luxaire’s line of premium indoor air quality products, including hybrid electronic air cleaners, media air cleaners, UV lights, and humidifiers.
Thermostat compatibility:A selection of compatible thermostats provide optimum performance and features for most installations.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This low-profile unit’s coil design includes grooved copper tubes and enhanced aluminum fin construction that improves heat transfer for efficiency and durability. All models share a common, compact cabinet in a single footprint and feature field-convertible duct connections.
Warranty information:Twenty-year heat exchanger, 10-year compressor, and five-year parts for a single-phase unit. Ten-year heat exchanger, five-year compressor, one-year parts for a three-phase unit.
Special installation requirements:Installation time and costs are reduced by easier power and control wiring connections. Utility connections can be made quickly with a minimum amount of field labor; a convertible airflow design allows maximum field flexibility and minimum inventory. The small base requires less space on the roof or ground.
Contact:Luxaire, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.luxairebelievesinme.com.
eProduct 196
Mammoth
Model:Q6SD packaged heat pumpFootprint (inches):47 by 55
Serviceability features:Designed for the contractor with external service ports, high-pressure control, anti-short-cycle timer, and internal filter rack are standard.
Technical support:Available 8 a.m.-4:30 p.m. Central at 800-422-4328.
Tech support materials:All technical support materials are available at www.nordyne.com.
Noise-reduction features:Operates quietly thanks to its low vibration and 20-inch fan blade, combined with custom venturi condenser fan.
IAQ equipment supported:Optional IAQ features include a fully modulating economizer capable of CO2 control, duel enthalpy control, and 2-inch filter capability.
Thermostat compatibility:Compatible with most heat pump thermostats.
Replacement parts compatibility:Shares common parts with the package air conditioner and gas-electric Mammoth models.
Additional features:A never-rust plastic mesh hail guard comes standard on all Mammoth 3- to 5-ton package units, protecting the coil from hail damage and more.
Warranty information:One-year commercial parts, five-year limited compressor.
Special installation requirements:Manufacturer did not specify.
Contact:Mammoth, O’Fallon, Mo.; attn: David Garvin, 636-561-7481; 888-271-1523 (fax); garvind@nordyne.com; www.nordyne.com.
eProduct 197
Footprint (inches):101 by 57
Serviceability features:Shares same roof curb and many accessories with all 7.5 and 10 ton package units. High- and low-pressure controls, freeze-protection thermostats, and crankcase heaters are all standard.
Technical support:Available 8 a.m.-4:30 p.m. Central at 800-422-4328.
Tech support materials:All technical support materials are available at www.nordyne.com.
Noise-reduction features:This model operates quietly thanks to its low vibration and 24-inch fan blade, combined with custom venturi condenser fan.
IAQ equipment supported:Optional fully modulating economizer capable of CO2 control; dual enthalpy control and 2-inch filters are standard.
Thermostat compatibility:Compatible with most two-stage thermostats.
Replacement parts compatibility:Shares common parts with the package air conditioner and heat pump.
Additional features:A never-rust plastic mesh hail guard comes standard on all Mammoth 3- to 10-ton package units, protecting the coil from hail damage and more.
Warranty information:One-year parts, five-year compressor, 10-year heat exchanger.
Special installation requirements:Manufacturer did not specify.
Contact:Mammoth, O’Fallon, Mo.; attn: David Garvin, 636-561-7481; 888-271-1523 (fax); garvind@nordyne.com; www.nordyne.com.
eProduct 198
Marvair
Model:GPac wall-mount air conditioner with gas heat, AVGFootprint (inches):42 by 25 and 42 by 29
Serviceability features:High and low refrigerant access valves; LEDs identify operating status with flashing fault codes; easily accessible filter, compressor, and electrical control box.
Technical support:During normal working hours, call 800-841-7854, ext. 146 or 113 Eastern. After-hours and weekend service, service pager is available at 800-204-8210.
Tech support materials:Wiring diagrams, owner’s manual, installation and maintenance manual. Service schools are periodically held at the factory and at customer premises. Parts list and parts drawings.
Noise-reduction features:Scroll compressor, high efficiency low noise indoor air mover. Patented tubular heat exchanger eliminates noise caused by expansion and contraction of internal baffles.
IAQ equipment supported:Five factory-installed ventilation packages feature manual or motorized dampers and are capable of introducing up to 450 cfm of outside air, including the GreenWheel® ERV. Economizer cycle for free cooling is available.
Thermostat compatibility:Compatible with virtually all air conditioners with heat thermostats. Optimal performance with the Mar5000 thermostat controller.
Replacement parts compatibility:Most components are shared with other models; many parts are common with other Marvair wall-mount air conditioners.
Additional features:Provides both cooling and gas heat and is designed to be mounted on the exterior of a building. Low-ambient controls allow cooling during cool ambient temperatures. Scroll compressor and tubular heat exchanger minimize sound levels.
Warranty information:One-year parts, five-year compressor, 10-year heat exchanger.
Special installation requirements:No special tools are required; installation normally takes a couple of hours. Conditioned air can be ducted or free blown. The units are factory configured for natural gas, but can be converted in the field for LP. High-altitude kits are available.
Contact:Marvair, Cordele, Ga.; attn: David Shuford, 229-273-3636; 229-273-5154 (fax); dshuford@arxcel.com; www.marvair.com.
eProduct 199
Mitsubishi Electric
Model:City Multi PUHY-HP96THMU-A heat pumpFootprint (inches):36 (w) by 30 by 65 (h)
Serviceability features:Complete built-in self-diagnostics direct a technician to a specific issue; convenient front, side, and top panels allow for easier access to serviceable components; reliable system components mean worry-free maintenance.
Technical support:Available at 877-391-5550, 8 a.m.-7 p.m. Eastern.
Tech support materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available at www.mehvac.com.
Noise-reduction features:The new 8-ton, 208/230-V hyper-heating (H2i) Y-Series outdoor unit features an inverter-driven outdoor fan motor and operates at 62 dBa in heating at -5°F. The compressor compartment is sealed by metal panels to attain low noise levels in all directions.
IAQ equipment supported:Addresses specific IAQ concerns effectively per zone rather than building wide. Provided are features like “dry” mode and a ventilation air connection, plus the ability to tie communications directly into Lossnay® energy recovery ventilators for a customized building IAQ comfort solution.
Thermostat compatibility:City Multi-specific controllers allow for zone-by-zone, complete-system, building, and campus-wide control capabilities. Enhanced features (beyond standard thermostats) include set-temperature limiting; airflow speed and direction; ventilation (ERV) control; error code monitoring; and multilingual display. Controls tie into existing building management systems like LonWorks® and BACnet®.
Replacement parts compatibility:Shares replacement parts.
Additional features:Provides 100 percent of rated heating capacity at 5° and 75 percent of rated heating capacity at -13º. The 8-ton unit can connect up to 16 indoor units and can be twinned to create a 16-ton system. The unit’s compact size allows it to fit through a standard-sized doorway for transportation and installation.
Warranty information:Limited six-year compressor; limited one-year parts and defects (five-year parts when a commission report is completed, the system was designed by Diamond Designer and installed by a Diamond Dealer).
Special installation requirements:Two refrigeration pipes speed up installation time compared to complete ducted systems; two-wire nonpolar for easier controller connections; specific zone needs can be addressed. The Design Tool is available to assist in system layout. Two separate front panels and control box located almost at eye level contribute to easier installation.
Contact:Mitsubishi Electric, Suwanee, Ga.; attn: Barbara Renaud, 678-376-2868; 800-658-1458 (fax); brenaud@hvac.mea.com; www.mehvac.com.
eProduct 200
Raypak Inc.
Model:XTherm™ 1005, 1505, 2005 boiler and water heaterFootprint (inches):31 (w) by 50 (d)
Serviceability features:All components are accessible from the front or right side of the unit, making troubleshooting and/or repair quicker and more cost effective.
Technical support:Contact local rep, listed at www.raypak.com.
Tech support materials:Available from Website (www.raypak.com) document library.
Noise-reduction features:Less than 50-dB operating noise.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Standard thermostat to call for heat; modulating controller.
Replacement parts compatibility:Shares components.
Additional features:XTherm has certified minimum thermal efficiency of 97 percent at full fire, low-NOx emissions, and the ability to operate with inlet temperatures as low as 50°F without damaging the boiler. Offers 4:1 turndown while maintaining its certified efficiency.
Warranty information:Limited 25-year thermal shock. Limited heat exchanger (10-year boilers, five-year water heaters).
Special installation requirements:A condensate drain line is required.
Contact:Raypak, Oxnard, Calif.; attn: Bob Nyland, 805-278-5300; 800-872-9725 (fax); www.raypak.com.
eProduct 201
Reznor/Thomas & Betts
Model:MAPS® III, RCB, RDB, RDCB, RDDB self-contained rooftop packaged unitFootprint (inches):Largest size 168 square feet
Serviceability features:Makeup air units designed for serviceability. Units have hinged service doors for all service areas, removable drain pans for cleaning, slide-out blower system for maintenance checks, slide-out filter racks for inspection and replacement, gauge ports, and more.
Technical support:Startup assistance can be arranged through the network of reps as well as phone installation support. Representatives can be reached during normal business hours at 800-695-1901. Installation and other technical manuals are available at www.rezspec.com.
Tech support materials:A complete set of installation manuals, wiring diagrams, and operation manuals are shipped with each unit. Additional copies, other manuals, and catalogs can be downloaded from www.rezspec.com.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Offers improved IAQ by introducing outside air to the indoor conditioned space. Four-inch disposable or permanent filters are available. An optional dirty filter indicator light is available on the control panel.
Thermostat compatibility:Compatible with most thermostats, but for better efficiency, DDC is recommended.
Replacement parts compatibility:Many parts are interchangeable with the MAPS (Modular Air Processing System) Series.
Additional features:Units provide dilution ventilation solutions for cooling, heating, dehumidifying, and filtering high outside air volumes.
Warranty information:Standard Reznor warranty is in effect. Extended five- and 10-year warranties are available on the heat exchanger and compressors.
Special installation requirements:Manufacturer did not specify.
Contact:Reznor/Thomas & Betts, Memphis, Tenn.; 800-695-1901; 901-252-1305 (fax); www.rezspec.com.
eProduct 202
Footprint (inches):Model PEH can be suspended. Model REH rooftop/slab footprint 2,052-9,106 square inches
Serviceability features:Makeup air units designed for serviceability. Units have hinged service doors for all service areas, removable drain pans for cleaning, slide-out blower system for maintenance checks, slide-out filter racks for inspection and replacement, gauge ports, and more.
Technical support:Every unit ships with a set of installation manuals, wiring diagrams, and operation manuals. For spec assistance, reps can be reached by calling 800-695-1901.
Tech support materials:In addition to installation manuals, wiring diagrams, and operation manuals shipped with each unit, a complete set of support literature and manuals is available at www.rezspec.com.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Offers improved IAQ by introducing outside air to the indoor conditioned space. Four-inch disposable or permanent filters are available. An optional dirty filter indicator light is available on the control panel. UV germicidal lamps are also available.
Thermostat compatibility:Units are compatible with most thermostats, but DDC is recommended for better efficiency.
Replacement parts compatibility:Series includes Models PEH and REH (electric heating units) and Models PDH, RDH and SDH (gas heating units). Many parts for the different units are interchangeable.
Additional features:High-efficiency heating and cooling equipment provides large amounts of fresh outside air.
Warranty information:Standard company warranty. An additional warranty is available on scroll compressors.
Special installation requirements:Installation manuals are readable and understandable. Installation requirements are normal for this type of equipment.
Contact:Reznor/Thomas & Betts, Memphis, Tenn.; 800-695-1901; 901-252-1305 (fax); www.rezspec.com.
eProduct 203
Rheem Heating and Cooling
Model:Prestige Series gas/electric RRRL package unitFootprint (inches):36 (h) by 51 (l) by 48 (d) (24,000-36,000 Btu); 41 (h) by 51 (l) by 48 (d) (48,000-60,000 Btu)
Serviceability features:Each unit comes with an integrated blower-burner control board with built-in diagnostic capability to facilitate troubleshooting. The RRRL has an easily removable filter, blower gas heater, and compressor/control access panels for service. Number- and color-coded wiring facilitates service and maintenance. Externally mounted refrigerant gauge ports allow easier diagnostics.
Technical support:Available for distributors and contractors throughout North America, or at www.rheemote.net.
Tech support materials:List of technical support materials available for distributors and contractors at www.rheemote.net.
Noise-reduction features:All models feature UltraTech scroll two-stage compressor and variable-speed motor. Both run at lower speeds on first stage for quieter operation. The scroll compressor’s advanced technology results in quieter operation. Each compressor is mounted on grommets that dampen noise and vibration. Also includes insulated panels that reduce noise. Balanced fans and blowers eliminate vibration. Structurally sound sheet metal and gasketing between panels reduce sound generation.
IAQ equipment supported:All models feature UltraTech scroll two-stage compressor with Comfort Alert diagnostics, resulting in high latent, sensible cooling ratio for significant humidity reductions. Comes standard with a variable-speed motor that adjusts airflow between first and second stage of cooling and allows on-demand humidification. The filter rack can be changed from one to two inches. Economizer or fresh air dampers can be installed to bring in clean air. Plastic drain pans facilitate cleaning. Foil-faced insulation can be wiped clean.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Offers common cabinet and components with the standard efficiency models.
Additional features:All models feature UltraTech Scroll, a two-stage compressor with Comfort Alert diagnostics. By monitoring and analyzing data from the compressor and thermostat, it can detect the cause of electrical and system-related failures. A flashing LED communicates the alert code and guides the service technician to the root cause of a problem. Comes standard with a variable motor that adjusts airflow between first and second stages of cooling and allows for on-demand humidification. This motor can deliver normal airflow up to 1 inch of static pressure.
Warranty information:Five-year limited lifetime on stainless steel heat exchanger, condenser, and evaporator coils; 10-year compressor and all other parts.
Special installation requirements:No special installation requirements.
Contact:Rheem Heating and Cooling, Decatur, Ga.; attn: Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.rheemac.com.
eProduct 204
Ruud Heating and Cooling
Model:Ultra Series gas/electric RRRL package unitFootprint (inches):36 (h) by 51 (l) by 48 (d) (24,000 to 36,000 Btu); 41 (h) by 51 (l) by 48 (d) (48,000 to 60,000 Btu)
Serviceability features:Each unit comes with an integrated blower-burner control board with built-in diagnostic capability that permits easier troubleshooting. The RRRL has removable filter, blower gas heater and compressor/control access panels for easier service. Number- and color-coded wiring facilitates service and maintenance. Externally mounted refrigerant-gauge ports allow easier diagnostics.
Technical support:Available for distributors and contractors throughout North America, or at www.rheemote.net.
Tech support materials:List of technical support materials available for distributors and contractors at www.rheemote.net.
Noise-reduction features:All models feature UltraTech scroll two-stage compressor and variable-speed motor. Both run at lower speeds on first stage for quieter operation. The scroll compressor’s advanced technology results in quieter operation. Each compressor is mounted on grommets to dampen noise and vibration, and insulated panels reduce noise. Balanced fans and blowers reduce vibration. Structurally sound sheet metal and gasketing between panels reduce sound generation.
IAQ equipment supported:All models feature the UltraTech scroll two-stage compressor with Comfort Alert diagnostics, resulting in high latent:sensible cooling ratio results in significant humidity reductions. Comes standard with a variable-speed motor that adjusts airflow between first and second stage of cooling and also allows for on-demand humidification. The filter rack can be changed from 1 to 2 inches. Economizer or fresh air dampers can be installed to bring in clean air. Plastic drain pans facilitate cleaning. Foil-faced insulation can be wiped clean.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Offers common cabinet and components with the standard efficiency models.
Additional features:All models feature UltraTech Scroll, a two-stage compressor with Comfort Alert diagnostics. By monitoring and analyzing data from the compressor and thermostat, it can detect the cause of electrical and system-related failures. A flashing LED communicates the alert code and guides the service technician to the root cause of a problem. Comes standard with a variable motor that adjusts airflow between first and second stages of cooling and also allows for on-demand humidification. This motor can deliver normal airflow up to 1 inch of static pressure.
Warranty information:Five-year limited lifetime on stainless steel heat exchanger, condenser, and evaporator coils; 10-year compressor and all other parts.
Special installation requirements:No special installation requirements.
Contact:Ruud Heating and Cooling, Decatur, Ga.; attn: Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.ruudac.com.
eProduct 205
Sanyo HVAC Solutions
Model:ECO-I W Three-way Multi, CHDZ14053Footprint (inches):35 (w) by 35 (d) by 75 (h)
Serviceability features:Easier access to all functional components via removal panels at base of unit. Onboard self-diagnostic information accessed via wired remote controllers. Service Checker tool (available from Sanyo) can provide in-depth diagnostics.
Technical support:Available 8:30 a.m.-5 p.m. Eastern at 800-851-1235.
Tech support materials:All technical materials available online (www.sanyohvac.com).
Noise-reduction features:Inverter-controlled rotary compressor starts at lowest speed with no load, which results in ultra-quiet startup and operation.
IAQ equipment supported:Connectable indoor units offer a variety of air filtration options. For humid climates, VRF technology ensures proper dehumidification, thus reducing the potential for mold growth within a building.
Thermostat compatibility:Requires Sanyo controllers.
Replacement parts compatibility:Many parts are common across the line. Some are unique to each model.
Additional features:Sanyo developed this simultaneous heating-cooling outdoor unit; over the past 20 years, this system has been refined to deliver high efficiencies and reliable performance.
Warranty information:One-year parts, six-year compressor.
Special installation requirements:Installing contractors need advance training before installing the ECO-i system, to familiarize them with proper piping protocols, line size limits, and commissioning sequence.
Contact:Sanyo HVAC Solutions, Kennesaw, Ga.; attn: Malcolm Persaud, 678-355-6635; 678-355-6684 (fax); mpersaud@sss.sanyo.com; www.sanyohvac.com.
eProduct 206
Sierra Fresh Air Systems
Model:ZDF furnaceFootprint (inches):Manufacturer did not specify.
Serviceability features:System diagnostics through DDC. Hinged access doors to all service areas.
Technical support:Available Monday-Friday, 7:30 a.m.-4:30 p.m. Central at 214-638-6010.
Tech support materials:Manufacturer did not specify.
Noise-reduction features:Optional 1-inch insulation.
IAQ equipment supported:Up to MERV-7 filters available.
Thermostat compatibility:DDC included with unit.
Replacement parts compatibility:Unique.
Additional features:One-inch aluminum tubing for casing framework. Patented AdatAire DDC is standard and compliant with BACnet, LON, N2, and Modbus; 2.5-inches w.g. of external static pressure; 18-gauge galvanized steel casing. Full-perimeter bulb gasket on all access doors.
Warranty information:One year from startup.
Special installation requirements:Manufacturer did not specify.
Contact:Sierra Fresh Air Systems, Dallas; attn: Jeff Wilson, 514-819-5272; 214-638-3324 (fax).
eProduct 207
Tempstar
Model:PGE180-240 package rooftopFootprint (inches):91 (w) by 86 (l)
Serviceability features:Units feature through-the-base utility connections capability, TXV metering devices to control refrigerant flow, and integrated gas control board with diagnostics. Easily removable panels provide ready access to unit components for removal or maintenance.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Tempstar dealer Website (www.gotempstar.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits to provide part-load cooling operation. Tubular, dimpled gas heat exchangers optimize heat transfer for improved efficiency. Induced-draft fan for gas combustion. High- and low-pressure controls protect the system during extreme cooling operating conditions. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs.
Warranty information:Ten-year limited heat exchanger, five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on these commercial products.
Special installation requirements:TXVs are used on each refrigerant circuit to provide optimum refrigerant part-load control.
Contact:Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gotempstar.com.
eProduct 208
Footprint (inches):120 (w) by 86 (l)
Serviceability features:Removable panels provide ready access to unit components for removal or maintenance. Units feature through-the-base utility connections capability, TXV metering devices to precisely control refrigerant flow, and integrated gas control board with diagnostics.
Technical support:A network of factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level.
Tech support materials:Product information posted online at the Tempstar dealer Website (www.gotempstar.com) includes product spec sheets, I/O manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.
Thermostat compatibility:Compatible with most commercial thermostats.
Replacement parts compatibility:Key components are standardized throughout the line.
Additional features:ASHRAE 90.1-compliant unit features independent cooling circuits for part-load cooling operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specs. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low-load operation. High- and low-pressure controls protect the system during extreme cooling operating conditions.
Warranty information:Ten-year limited heat exchanger, five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on these commercial products.
Special installation requirements:TXVs are used on each refrigerant circuit to provide optimum part-load control.
Contact:Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gotempstar.com.
eProduct 209
Trane
Model:YHC036E, YHC048E, YHC060E and THC036E, THC048E, THC060E convertible packaged rooftopFootprint (inches):3,080 square inches
Serviceability features:Single side service through Quick-Sess™ panels. ReliaTel™ microprocessor controls feature colored and numbered wiring. On factory-installed belt-drive indoor fan models, an easier-to-adjust indoor fan idler mechanism provides quicker belt tensioning. To speed service, factory-installed options include phase monitors, hail guards, disconnects, 115-vac outlets, and hinged access doors.
Technical support:Available through distribution, plus additional factory support.
Tech support materials:Y_C, T_CSVB002-EN wiring manuals and RT-SVD03*-EN (Micro guide).
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Two-inch pleated filters, slide-out noncorrosive drain pan, CO2 sensing, low airflow.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares parts.
Additional features:Superior dehumidification capabilities with selections down to 200 cfm/nominal ton, ReliaTel controls, and enhanced lead times.
Warranty information:Five-year compressor, five-year standard gas heat exchanger, 10-year stainless steel heat exchanger.
Special installation requirements:None; TXVs are standard for this offering.
Contact:Trane, Tyler, Texas; attn: Mike Ray, 903-509-7240; 903-581-9070 (fax); mike.ray@trane.com; www.trane.com.
eProduct 210
Unico Inc.
Model:Unichiller three-phase reverse-cycle heat pumpFootprint (inches):18 (d) by 46 (h) by 30 (w)
Serviceability features:Easier to service; all parts available.
Technical support:Available at 314-481-9000 or 800-527-0896, 7 a.m.-5 p.m. Central.
Tech support materials:Listed on Website.
Noise-reduction features:66 dBa.
IAQ equipment supported:No refrigerant transferred indoors. Water/glycol mix used as the heat-transfer substance.
Thermostat compatibility:Compatible.
Replacement parts compatibility:Shares replacement parts.
Additional features:Company says it is the only manufacturer of reverse-cycle chillers for the residential market.
Warranty information:Five-year parts with ability to purchase 10-year extended warranty.
Special installation requirements:Proper sizing for water piping.
Contact:Unico Inc., St. Louis; attn: Steve Intagliata, 800-527-0896; 314-457-9000 (fax); sales@unicosystem.com; www.unicosystem.com.
eProduct 211
WaterFurnace International
Model:Envision Console NCS15Footprint (inches):50 (w) by 12 (d) by 26 (h) flat top; 50 (w) by 13 (d) by 29 (h) slope top
Serviceability features:Compact unit has removable panels for easier access to the compressor, coaxial heat exchanger, reversing valve, and safety controls. High- and low-pressure ports are also installed.
Technical support:The dealer line is 888-929-2837, 8 a.m.-5 p.m. Eastern.
Tech support materials:Spec Catalog SP1615, Installation Manual IM1615, Submittal SD1615
Noise-reduction features:Comes with the compressor mounted on a double-isolation plate for sound reduction. An additional sound package with a multidensity, full-coverage compressor blanket is available to provide quieter operation.
IAQ equipment supported:Comes with a 1-inch filter.
Thermostat compatibility:Has an internal thermostat and is compatible with any three-heat/two-cool thermostat.
Replacement parts compatibility:Shares replacement parts.
Additional features:Narrow footprint gives it an edge over the competition in retrofit applications.
Warranty information:An 18-month parts-only warranty starts from the ship date. An extended five-year warranty is available.
Special installation requirements:Manufacturer did not specify.
Contact:WaterFurnace International, Fort Wayne, Ind.; attn: Ryan Stauffer, 260-479-3262; 260-747-5780 (fax); ryan.stauffer@waterfurnace.com; www.waterfurnace.com.
eProduct 212
Footprint (inches):NW360, 63 to 64 (h) by 23 to 24 (w) by 50 (d); NW540, 70 to 71 (h) by 23 to 24 (w) by 52 (d)
Serviceability features:Designed with the service technician in mind, the Reversible Chiller features easier access to the controls, TXV, and filter-drier.
Technical support:The dealer line is 888-929-2837, 8 a.m.-5 p.m. Eastern.
Tech support materials:Spec Catalog SP1599, Installation Manual IM1599, Submittal SD1599
Noise-reduction features:An optional sound-reducing enclosure is available.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:The controls are unique to the product.
Replacement parts compatibility:Shares many replacement parts amongst the models within the product series.
Additional features:Besides boasting the highest efficiency ratings in the industry, the Reversible Chiller can provide simultaneous heating and cooling where other modular chillers on the market can only provide either heating or cooling, the company said.
Warranty information:An 18-month parts-only warranty starts from the ship date. An extended five-year warranty is available.
Special installation requirements:Manufacturer did not specify.
Contact:WaterFurnace International, Fort Wayne, Ind.; attn: Ryan Stauffer, 260-479-3262; 260-747-5780 (fax); ryan.stauffer@waterfurnace.com; www.waterfurnace.com.
eProduct 213
York
Model:Affinity™ Series packaged heating-cooling unitsFootprint (inches):49 (l) by 47 (w) by 34 or 42 (h)
Serviceability features:A large, single panel covering the electrical and gas controls makes servicing easier. The blower compartment has an additional large panel with a built-in handle that, when removed, allows the blower assembly to slide out for maintenance and troubleshooting.
Technical support:Manufacturer did not specify.
Tech support materials:A technical guide is available at www.upgnet.com or by request.
Noise-reduction features:Upward airflow carries the normal operating noise up and away from the living area. The rigid top panel isolates any motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle normal fan motor and compressor operating sounds. The formed base pan also aids by strategically placing embossments in the pan for optimum strength and rigidity.
IAQ equipment supported:The unit can be matched with York’s line of hybrid electronic air cleaners, media air cleaners, UV lights, and humidifiers.
Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for most installations.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This low-profile unit’s coil design includes grooved copper tubes and enhanced aluminum fin construction that improves heat transfer for efficiency and durability. All models share a common, compact cabinet in a single footprint, and feature field-convertible duct connections.
Warranty information:Twenty-year heat exchanger, 10-year compressor, and five-year parts for a single-phase unit; 10-year heat exchanger, five-year compressor, and one-year parts for a three-phase unit.
Special installation requirements:Installation time and costs are reduced by easier power and control wiring connections. Utility connections can be made quickly with a minimum amount of field labor, and a convertible airflow design allows maximum field flexibility and minimum inventory. The small base requires less space on the roof or ground.
Contact:York, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.yorkupg.com.
eProduct 214
Footprint (inches):64 (h) by 240 (w) by 92 (d)
Serviceability features:Hinged and latched door options give access on both sides of the unit to all major components. Some doors have positive-action slide latches for greater ease of access. All service fittings are located to minimize time and effort.
Technical support:Manufacturer did not specify.
Tech support materials:A technical guide is available at www.upgnet.com or by request.
Noise-reduction features:Neoprene mounts provide vibration isolation and contribute to the unit’s quiet performance. One- and 2-inch isolation springs can provide even greater protection from supply air fan noise and vibration.
IAQ equipment supported:Unit gives designers the flexibility to meet various IAQ requirements with a full range of rigid and throwaway filters at different efficiency levels. In addition, the unit’s standard double-wall construction keeps microfibers out of the airstream.
Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for any installation.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Featuring industry-leading efficiency, the low-profile, flexible unit can fit any need, from cooling only and constant-volume applications to variable-air-volume systems with a variable-frequency drive. Its standard, double-wall construction provides maximum resistance to bacterial growth in the airstream and structural integrity.
Warranty information:Ten-year heat exchanger, one-year compressor and parts.
Special installation requirements:Installation is easier thanks to a complete offering of supply airflows and static pressure combinations, a single gas-electric connection (that may be brought up from the curb or through the side of the unit), a simpler control system and a rain hood that rotates into place.
Contact:York, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.yorkupg.com.
eProduct 215
Publication date:08/25/2008
Report Abusive Comment