Acadia

Model:Combined heating-cooling system

Footprint (inches):30 by 48

Serviceability:All panels can be removed for access to components. All wiring, electrical components immediately accessible from front panel. All components available at any local supply house.

Technical support:Free 24-hour technical support with each sale. Call 207-990-5600, ext. 118.

Technical materials:Installation, troubleshooting, and owner’s manual, wiring diagrams, contractor spec sheet, thermostat manual, air handler manual.

Noise reduction:Compressors enclosed in cabinet (not exposed to outdoor air), acoustical and thermal insulation in compressor cabinet, swept-blade fan design, enhanced compressor mounting to minimize acoustical and structural radiation.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Can be used with any three-heat/two-cool thermostat.

Replacement compatibility:Composed of industry-standard components.

Additional:An air-source heat pump that heats and cools a home without any backup heat source in any climate. Using patented, boosted compression technology, the system is designed specifically for heating while maintaining high cooling efficiency with multistage capacity.

Warranties:Five-year all parts, including compressors.

Special installation requirements:Insulate liquid and vapor lines. Install filter-drier inside home next to air handler and insulate. Install unit on approved snow stands.

Contact:Acadia, Bangor, Maine; attn: Duane Hallowell, 207-990-5600, ext. 111; 207-990-5602 (fax); dhallowell@gotohallowell.com; www.gotohallowell.com.

eProduct 160

AirEase

Model:4SCU18LT split system

Footprint (inches):38 by 36 by 44 (2-5 ton)

Serviceability:Access with the removal of two screws. Double and single concentric knockouts for quick electrical connections. U-channel routing of condenser fan wires for easier top removal. Ground lugs on all models. ComfortAlert2™ diagnostics for quick problem identification. Service valves accessible; stand-alone mounting.

Technical support:Available at 800-515-3501 8 a.m.-5 p.m. Eastern, Monday-Friday.

Technical materials:Wiring diagram, troubleshooting info, installation data, performance data, parts and accessories documentation.

Noise reduction:UltraTech™ scroll compressors with sound blankets.

IAQ equipment:Compatible with most IAQ products.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Many common parts with other Armstrong a/c and heat pump splits.

Additional:Standard with a two-stage compressor, sound blanket, and ComfortAlert2 diagnostics. Compatible with indoor variable-speed products for enhanced home comfort and energy efficiency.

Warranties:Ten-year compressor, 10-year parts.

Special installation requirements:TXV.

Contact:AirEase, West Columbia, S.C.; attn: Coushatta Fuller, 803-738-4114; 803-738-4001 (fax); coushatta.fuller@alliedair.com; www.airease.com.

eProduct 161

Model:4SHP18LT heat pump

Footprint (inches):38 by 36 by 44 (2-5 ton)

Serviceability:Access with the removal of two screws. Double and single concentric knockouts for quick electrical connections. U-channel routing of condenser fan wires for easier top removal. Ground lugs standard. Comfort Alert2™ diagnostics for quick problem identification. Defrost control features LED diagnostics and quiet shift.

Technical support:Available at 800-515-3501 8 a.m.-5 p.m. Eastern, Monday-Friday.

Technical materials:Wiring diagram, troubleshooting info, installation data, performance data, parts and accessories documentation.

Noise reduction:UltraTech™ scroll compressors with sound blankets.

IAQ equipment:Compatible with most IAQ products.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Many common parts with other Armstrong a/c and heat pump splits.

Additional:Comes with a two-stage compressor, sound blanket, and ComfortAlert2 diagnostics. Compatible with indoor variable-speed products for enhanced home comfort and energy efficiency.

Warranties:Ten-year compressor, 10-year parts.

Special installation requirements:TXV.

Contact:AirEase, West Columbia, S.C.; attn: Coushatta Fuller, 803-738-4114; 803-738-4001 (fax); coushatta.fuller@alliedair.com; www.airease.com.

eProduct 162

Amana Heating and Cooling

Model:ASX180361A split system

Footprint (inches):35 (w) by 35 (d) by 38 (h)

Serviceability:Designed for easier maintenance with easy-access panels, and equipped with Copeland ComfortAlert™ diagnostics. There is single-panel access to controls, a large-diameter control panel, and access to the service valve ports via a large, easier-to-remove side panel.

Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday at 888-292-6262.

Technical materials:ASZ18 spec sheet, installation manual, operations manual, technical manual, and service manuals are included.

Noise reduction:Acoustically engineered to be operationally quiet, featuring a sound-reduction compressor sound blanket made of high-density foam, and an Amana® designed sound-control top in order to minimize operational noise and provide efficient cooling. The two-speed operation of the condenser fan motor allows the outdoor fan to run more frequently at a lower speed, further reducing noise. Compressor isolation achieved by four resilient rubber mounts.

IAQ equipment:Compatible with a full line of Amana IAQ accessories.

Thermostat compatibility:Compatible with two-stage thermostats.

Replacement compatibility:Shares common components with other Amana/Goodman products.

Additional:The two-stage, high-efficiency Copeland scroll compressor provides improved temperature and humidity control. Add in Copeland ComfortAlert diagnostics, plus a lifetime unit replacement limited warranty, and the ASX18 is designed for the consumer who desires superior comfort, quiet operation, and environmentally friendly performance.

Warranties:Limited lifetime unit replacement; 10-year parts replacement.

Special installation requirements:TXV required for indoor unit.

Contact:Amana Heating and Cooling, Houston; attn: Rex Anderson, 713-263-5064; 713-263-5064 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 163

Model:ASZ180361A heat pump

Footprint (inches):35 (w) by 35 (d) by 38 (h)

Serviceability:Panel access to controls, a large-diameter control panel, and access to the service valve ports via a large, easier-to-remove side panel.

Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday at 888-292-6262.

Technical materials:ASZ18 spec sheet, installation manual, operations manual, technical manual, and service manuals are included.

Noise reduction:Acoustically engineered to be operationally quiet, featuring a sound-reduction compressor sound blanket made of high-density foam; an Amana designed sound-control top in order to minimize operational noise. The two-speed operation of the condenser fan motor allows the outdoor fan to run more frequently at a lower speed, further reducing noise. Compressor isolation achieved by four resilient rubber mounts. There is a wire fan discharge grille.

IAQ equipment:Compatible with a full line of Amana IAQ accessories.

Thermostat compatibility:Compatible with two-stage thermostats.

Replacement compatibility:Shares common components with other Amana/Goodman products.

Additional:Features an outstanding lifetime unit replacement limited warranty plus the two-stage, high-efficiency Copeland scroll compressor that provides improved temperature and humidity control. Add in Copeland ComfortAlert Diagnostics, and you’ve got problem-free operation in a unit that features high-efficiency, energy savings, outstanding performance, and quiet operation.

Warranties:Limited lifetime unit replacement; 10-year parts replacement.

Special installation requirements:TXV required for indoor unit.

Contact:Amana Heating and Cooling, Houston; attn: Rex Anderson, 713-263-5064; 713-263-5064 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 164

Amcoraire

Model:AMS121HX heat pump inverter

Footprint (inches):39 by 14 by 11 (indoor); 39 by 27 by 16 (outdoor)

Serviceability:Advanced inverter technology features low ambient operation to -4°F. Unit comes with a wireless remote and a wired controller. Clean styling with LCD display for temperature and functions.

Technical support:Available 9 a.m.-5 p.m. Eastern at 201-460-8100, or e-mail don@amcorgroupusa.com.

Technical materials:Technical support materials available at www.amcorgroupusa.com.

Noise reduction:Compressor insulation.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:All controls included, wired and wireless.

Replacement compatibility:Some parts shared with other Amcor models.

Additional:Fresh new look with LCD for temperature and function; 18 SEER, low ambient operation to -4°F.

Warranties:Three-year parts, hassle-free exchange; five-year compressor.

Special installation requirements:Capillary tube in condensing unit requires both lines to be insulated.

Contact:Amcor Inc., Carlstadt, N.J.; attn: Mark O’Donnell, 201-460-8100; 201-460-9481 (fax); mark@amcorgroupusa.com; www.amcorgroupusa.com.

eProduct 165

American Standard Heating and Air Conditioning

Model:Heritage Hybrid™ 16 packaged unit

Footprint (inches):38 (h) by 51 (w) by 43 (d)

Serviceability:Locating critical components is easier with independently removable, embossed service panels. The slide-out Vortica blower is mounted by a single fastener. Secured with rotolock fittings, the Duration™ compressor is conveniently located in the left corner compartment. Inverted outdoor fan and motor design allows for easier removal and service.

Technical support:Contact local American Standard distributor.

Technical materials:DealerNet Internet site for American Standard dealers and distributors allows quick access to the most current support materials, including catalog pages, installer guides, service facts, dealer sheets, product data, submittals, and owner manuals.

Noise reduction:The quietest unit at every tonnage, with sound levels as low as 70 dB. The variable-speed blower fan motor and exclusive Comfort-R controls help eliminate noisy start up and shut down. Super-quiet high-efficiency ducted fan moves air with a sophisticated, aerodynamic blade.

IAQ equipment:Available IAQ accessories include the Accu Exchange ERV, which removes stale indoor air and replaces it with an equal amount of fresh outdoor air. Motorized and manual fresh air dampers and economizers can provide up to 25 percent fresh air to the conditioned space. Humidifiers prevent dryness and reduce static electricity.

Thermostat compatibility:Compatible with certain thermostats, but American Standard markets its own thermostats.

Replacement compatibility:Shares parts with other models in the line.

Additional:The Heritage Hybrid 16 offers homeowners the highest efficiency and control over energy costs with four stages of heating and two fuel choices. Quietest performance on the market. Exclusive spine fin coils resist formicary corrosion for long-lived efficiencies.

Warranties:Twenty-year limited heat exchanger; 10-year limited Duration™ compressor and condenser; five-year limited on all other functional parts.

Special installation requirements:Easily converted for horizontal or vertical applications. Factory-built 12- and 18-inch duct covers for extra-clean, horizontal installation. Panhead screws on supply and return panel for flush-fit duct connections. Easier electrical and gas connections on the right side.

Contact:American Standard, Tyler, Texas; attn: Jamie Byrne, 903-581-3300; 903-581-9070 (fax); jamie.byrne@americanstandard.com; www.americanstandardair.com.

eProduct 166

Arcoaire

Model:DX 1400 split system

Footprint (inches):35 (w) by 37 (d)

Serviceability:Innovative control box with easier-to-remove panel for troubleshooting access to components (plug and play), control accessories prepunched for attachment. Easy access to compressor, internal components. Free-and-clear refrigerant tube stubs. Three-piece grille panels are easier to remove separately to view and clean. Comfort Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Arcoaire dealer Website (www.goarcoaire.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with two-speed fan motors and Copeland scroll compressors to produce minimal sound at maximum performance. High-performance compressor sound shield is standard.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Tight wire coil guard with 3/ 8 -inch spacing provides maximum protection with optimal airflow. An air management system (AMS) improves performance without increasing sound. ComfortAlert™ troubleshooting LED fault indicators diagnose system-related malfunctions.

Warranties:Ten-year limited compressor; seven-year limited outdoor coil; and five-year limited parts. This product qualifies for the Arcoaire seven-year No Hassle Replacement™ limited warranty. (If the compressor or covered coil fail within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:TXV expansion devices recommended for maximum system reliability.

Contact:Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.

eProduct 167

Model:PHX4 package heat pump

Footprint (inches):47 (w) by 47 to 73 (d)

Serviceability:Externally mounted gauge ports allow for more accurate reading of operating conditions during service. Access to electrical and gas controls located behind one exterior panel.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Arcoaire dealer Website (www.goarcoaire.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and variable-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:14 SEER efficiency in a package heat pump. An advanced Copeland scroll Ultra-Tech two-stage compressor quietly ramps up or down to provide more or less cooling or heating based on the needs of the home - eliminating uncomfortable temperature swings common to single-stage systems.

Warranties:Ten-year limited compressor, seven-year limited outdoor coil, and five-year limited parts. This product qualifies for the Arcoaire seven-year No Hassle Replacement™ limited warranty. (If the compressor or covered coil fail within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:None.

Contact:Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.

eProduct 168

Armstrong

Model:4SCU18LT split system

Footprint (inches):38 by 36 by 44 (2-5 ton)

Serviceability:Access with the removal of two screws. Double and single concentric knockouts for quick electrical connections. U-channel routing of condenser fan wires for easier top removal. Ground lugs on all models. ComfortAlert2 diagnostics for quick problem identification. Service valves easily accessible and stand alone mounting.

Technical support:Available at 800-515-3501 8 a.m.-5 p.m., Eastern, Monday-Friday.

Technical materials:Wiring diagram, troubleshooting info, installation data performance data, parts and accessories documentation.

Noise reduction:UltraTech™ scroll compressors with sound blankets.

IAQ equipment:Compatible with most IAQ products.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Many common parts with other Armstrong a/c and heat pump splits.

Additional:Comes with a two-stage compressor, sound blanket, and ComfortAlert2™ diagnostics. Compatible with indoor variable-speed products for enhanced home comfort and energy efficiency.

Warranties:Ten-year compressor, 10-year parts.

Special installation requirements:TXV.

Contact:Armstrong, West Columbia, S.C.; attn: Coushatta Fuller, 803-738-4114; 803-738-4001 (fax); coushatta.fuller@alliedair.com; www.armstrongair.com.

eProduct 169

Model:4SHP18LT heat pump

Footprint (inches):38 by 36 by 44 (2-5 ton)

Serviceability:Access possible with the removal of two screws. Double and single concentric knockouts offer quick electrical connections. U-channel routing of condenser fan wires offers easier top removal. Ground lugs on all models. ComfortAlert2 diagnostics for quick problem identification. Defrost control features LED diagnostics and quiet shift.

Technical support:Available at 800-515-3501 8 a.m.-5 p.m., Eastern, Monday-Friday.

Technical materials:Wiring diagram, troubleshooting info, installation data performance data, parts and accessories documentation.

Noise reduction:UltraTech scroll compressors with sound blankets.

IAQ equipment:Compatible with most IAQ products.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Many common parts with other Armstrong a/c and heat pump splits.

Additional:Comes with a two-stage compressor, sound blanket and ComfortAlert2 diagnostics. Compatible with indoor variable-speed products for enhanced home comfort and is very energy efficient.

Warranties:Ten-year compressor, 10-year parts.

Special installation requirements:TXV.

Contact:Armstrong, West Columbia, S.C.; attn: Coushatta Fuller, 803-738-4114; 803-738-4001 (fax); coushatta.fuller@alliedair.com; www.armstrongair.com.

eProduct 170

Bard Manufacturing Co.

Model:GSVS Series geothermal heat pump

Footprint (inches):26-27 (d) by 48-55.5 (h) by 27.5 to 32.5 (w)

Serviceability:Features scroll compressor, variable-speed ECM motor, built-in domestic hot water heat exchanger, high- and low-pressure switches standard, moveable control panel, slide-in electric heat strips, fully insulated high-efficiency cupro-nickel coaxial water coil, TXV. All water connections on outside of cabinet offers ease of installation.

Technical support:Available through local Bard distribution network.

Technical materials:Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.

Noise reduction:Compressor-service compartment insulated to reduce noise levels, variable-speed ECM blower motor: soft starting, constant CFM over a wide range of static pressure.

IAQ equipment:Compatible with field-installed electronic air cleaner or high-efficiency media type filters through the installing dealer.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Product line shares standard Bard replacement parts.

Additional:Suitable for ground water or earth loop applications, ARI 330 certified, cupro-nickel water coil, slide-in electric heater packages, domestic hot water heat exchanger factory installed, variable-speed ECM blower motor.

Warranties:Five-year parts, five-year compressor, optional six- to 10-year compressor.

Special installation requirements:None.

Contact:Bard Manufacturing Co., Bryan, Ohio; attn: Bill Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 171

Model:PA13 Series packaged air conditioner

Footprint (inches):53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)

Serviceability:Over and under supply and return configuration eliminates the need for costly field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, top discharge outdoor fan, electrical components and controls readily accessible through side panel.

Technical support:Available through local Bard distribution network.

Technical materials:Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.

Noise reduction:ECM indoor blower motor provides low sound levels and soft-start capabilities.

IAQ equipment:Compatible with field-installed electronic air cleaner or high-efficiency media type filters through the installing dealer.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Product line shares standard Bard replacement parts.

Additional:Over and under supply and return air configuration. Ideal for retrofit market as it eliminates need for costly field modification. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.

Warranties:Five-year parts, five-year compressor, optional six- to 10-year compressor.

Special installation requirements:None.

Contact:Bard Manufacturing Co., Bryan, Ohio; attn: Bill Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 172

Bryant Heating and Cooling

Model:Evolution system 180A split system

Footprint (inches):40 by 36

Serviceability:Features self-configuring components for optimum performance and up to 83 points of diagnostics for Evolution system with fault messages and operational history displayed on wall Evolution Control.

Technical support:Varies by distributor.

Technical materials:Product Data Sheet - PDS180A.24.2, Wiring Diagram - WD 180A.18.1, Installation and Start-up Manual - II180A-24-3, Owners’ Manual - OM01-25, Long Line (up to 200 feet) Applications Guide - LLGP-2XA.

Noise reduction:Enhanced five-point AeroQuietSystem II™ design with compressor sound blanket, forward-swept condenser fan blade and quiet mount split-post compressor grommets.

IAQ equipment:Supports Evolution air purifier, UV lights, humidifier, Evolution Control.

Thermostat compatibility:Evolution Control.

Replacement compatibility:Some common parts.

Additional:Innovative award-winning patented design loaded with features such as DuraFlow™ louver design, back-seating service valves, Puron® refrigerant, and intelligence only found in the Evolution system. The 180A has earned the coveted Consumer’s Digest Best Buy for premium air conditioners.

Warranties:Ten-year limited compressor, five-year limited all other parts.

Special installation requirements:Evolution system compatible indoor unit and Evolution Control requiring only four wires for full system component communications.

Contact:Bryant Heating and Cooling Systems, Indianapolis; 888-994-7237; 800-844-2042 (fax); bryantprograms@bryant.com; www.bryant.com.

eProduct 173

Model:Evolution System 288ANA heat pump

Footprint (inches):40 by 36

Serviceability:Features self-configuring components for optimum performance and up to 83 points of diagnostics for Evolution system with fault messages and operational history displayed on wall Evolution Control.

Technical support:Varies by distributor.

Technical materials:Product Data Sheet - PDS 288A.24.2, Heating Check Chart - HCC288A-01, Wiring Diagram - WD 288A.24.1, Installation and Start-up Manual - II286A-24-3, Owners’ Manual - OM02-29 Long Line (up to 200 feet) Applications Guide - LLGP-2XA.

Noise reduction:Enhanced five-point AeroQuietSystem II™ design with compressor sound blanket, forward-swept condenser fan blade, and quiet mount split-post compressor grommets.

IAQ equipment:Supports Evolution air purifier, UV lights, humidifier, Evolution Control.

Thermostat compatibility:Evolution Control.

Replacement compatibility:Some common parts.

Additional:Award-winning, patented design with features such as DuraFlow™ louver design, back-seating service valves, Puron® refrigerant, and intelligence only found in the Evolution system. The 288ANA has earned the Consumer’s Digest Best Buy for premium air conditioners.

Warranties:Ten-year limited compressor, five-year limited all other parts.

Special installation requirements:Evolution system-compatible indoor unit and Evolution Control requires four wires for full system component communications.

Contact:Bryant Heating and Cooling Systems, Indianapolis; 888-994-7237; 800-844-2042 (fax); bryantprograms@bryant.com; www.bryant.com.

eProduct 174

Carrier

Model:Infinity Series 25HNA9 heat pump

Footprint (inches):40 by 36

Serviceability:Self-configuring components offer optimum performance and up to 83 points of diagnostics for Infinity system with fault messages and operational history displayed on wall Infinity Control.

Technical support:Varies by distributor.

Technical materials:Product Data Sheet - 25HNA9-2PD, Heating Check Chart - 25HNA9-1HCC, Service and Installation Manual - 25HNA-3SI, Owners’ Manual - OM25-3, Long Line (up to 200’) Applications Guide - LLGP-2XA.

Noise reduction:Enhanced seven-point SilencerSystem II™ design with compressor sound blanket, laminated compressor mounting plate, forward-swept condenser fan blade, SilencerSystem II™ top with integrated silencer airflow baffle, and quiet mount split-post compressor grommets.

IAQ equipment:Supports Infinity air purifier, UV lights, humidifier, and control.

Thermostat compatibility:Infinity Control.

Replacement compatibility:Some common parts.

Additional:Award-winning, patented design includes features such as WeatherArmor Ultra™ protection package, including enhanced louver design, back-seating service valves, Puron® refrigerant, and intelligence only found in the Infinity system.

Warranties:Ten-year limited compressor, five-year limited all other parts.

Special installation requirements:Infinity system compatible indoor unit and Infinity Control require four wires for full system component communications.

Contact:Carrier, Indianapolis; attn: Kristie Hensley, 800-946-2930; 800-844-2042 (fax); expertcentral@carrier.com; www.residential.carrier.com.

eProduct 175

Model:Performance™ 14 Series small packaged products

Footprint (inches):48 by 33 (up to 3 ton); 48 by 44 (3.5-5 ton)

Serviceability:Single panel provides access to compressor, blower motor, gas section, and control box.

Technical support:800-227-7437 (800-CARRIER).

Technical materials:Product data sheets are available that include technical information on the product and wiring diagrams.

Noise reduction:Manufacturer did not specify.

IAQ equipment:UV lights available as field-installed accessory.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Replacement parts available through Totaline® stores.

Additional:This line was designed to achieve 12 EER ratings along with 14 SEER in order to exceed Energy Star® and meet CEE Tier II criteria. Performance 14 Series is the most comprehensive lineup in this category (all models 2-5 tons in all product types qualify).

Warranties:Fifteen-year limited heat exchanger, 10-year limited compressor, five-year limited other parts. Optional stainless steel heat exchanger comes with a limited lifetime warranty and optional tin-plated indoor coil comes with a 10-year limited.

Special installation requirements:Unit is down-discharge convertible. Roof curbs are available for commercial applications.

Contact:Carrier, Indianapolis; attn: Jennifer Morani, 317-481-5768; 860-660-3779 (fax); jennifer.morani@carrier.utc.com; www.carrier.com.

eProduct 176

Carrier Duct Free

Model:Comfort Series duct-free high-mount system with Puron®

Footprint (inches):Up to 49 (w) by 13 (h) by 9 (d) - indoor unit; up to 31 (w) by 34 (h)

Serviceability:Removing top panel on the outdoor unit provides access to the control compartment. Coils can be cleaned from the inside using a pressure hose. On all indoor units, service-maintenance expense is reduced due to easy-to-use, cleanable filters. These systems have extensive self diagnostics to assist in troubleshooting.

Technical support:Available at www.expertcentral.com and 800-946-2930.

Technical materials:Product data brochures, installation instructions, owner’s manual.

Noise reduction:There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork. The advanced, horizontal airflow design of the 38MVC/MVQ distributes air more evenly over the coil, reducing noise.

IAQ equipment:Dehumidification mode, easy-to-remove filter that can be cleaned.

Thermostat compatibility:Thermostat is a sophisticated, yet intuitive, easy-to-use infrared remote.

Replacement compatibility:Some replacement parts are shared between multiple models.

Additional:Capable of operating at -20°F with available low ambient accessories.

Warranties:Five-year limited compressor, one-year limited on entire unit. Extended warranties are available.

Special installation requirements:None.

Contact:Carrier Duct Free, Indianapolis; attn: Kristie Hensley, 317-260-2657; 860-660-9366 (fax); kristie.hensley@carrier.utc.com; www.carrier.com.

eProduct 177

Century

Model:M Series Tri-Zone ductless mini-split

Footprint (inches):34 (w) by 7 (d), indoor unit; 31 to 13 (d), outdoor unit

Serviceability:Self diagnostics help simplify troubleshooting. Service ports and connections are located on the side of the condenser. Indoor units lift off hanging brackets and covers are quickly removed for service.

Technical support:Available at 517-787-2100 8 a.m.-5 p.m. Eastern, weekdays.

Technical materials:Installation-operation-maintenance, service manual, and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.

Noise reduction:Indoor units have multispeed, high-tech cross-flow fan for ultra-quiet operation; condensing unit keeps operational noise outside.

IAQ equipment:Triple filtration; electrostatic, antifungal, and deodorizing filters.

Thermostat compatibility:Built-in thermostat can be set using the wireless remote (included) or wired controls.

Replacement compatibility:Indoor unit parts are shared across mini-split lines; outdoor unit parts are unique.

Additional:Tri-zone allows three rooms or areas to be cooled utilizing three indoor air handlers and one outdoor condenser. Each indoor unit is operated independently with its own wireless remote. Condensers can be located up to 50 feet from indoor units. Multiple modes including cooling, dehumidification and fan only, plus automatic louver random swing.

Warranties:Five-year compressors, one-year other parts, see printed warranty for details-limitations. AssurancePlus™ extended warranty coverage available.

Special installation requirements:Follow installation manual, standard industry practices, and local-national codes.

Contact:Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 178

Model:SMA Series ductless mini-split, single zone

Footprint (inches):31 to 49 (w) by 8 to 9 (d), indoor unit; 31 to 35 (w) by 10 to 13 (d), outdoor unit.

Serviceability:Self diagnostics help simplify troubleshooting. Service ports and connections are conveniently located on the side of the condenser. Indoor units easily lift off hanging brackets and covers are quickly removed for service.

Technical support:Available at 517-787-2100 8 a.m.-5 p.m. Eastern, weekdays.

Technical materials:Installation-operation-maintenance, service manual and parts list can be e-mailed as PDF or sent as hard copies; also available online to distributors.

Noise reduction:Indoor units have multispeed, high-tech cross-flow fan for ultra-quiet operation; condensing unit keeps operational noise outside.

IAQ equipment:Triple filtration; electrostatic, antifungal, and deodorizing filters.

Thermostat compatibility:Built-in thermostat can be set using the wireless remote or with wired controls.

Replacement compatibility:Many parts across mini-split line are shared.

Additional:Unit automatically adjusts to maintain a constant temperature-humidity level and automatically compensates for temperature stratification between ceiling and floor temperature; three-minute delay at start-up to protect the compressor from short cycling; multiple modes for comfort including jet cool, sleep, dehumidification only and fan only.

Warranties:Five-year compressors, one-year other parts. See printed warranty for details-limitations. AssurancePlus™ extended warranty coverage available.

Special installation requirements:Follow installation manual, standard industry practices, and local-national codes.

Contact:Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 179

Coleman

Model:Echelon™ split system, AC8B

Footprint (inches):39.5 by 42 by 34

Serviceability:A full-end, full-service access panel with a handle provides access to internal components, and a slide-down control compartment and angled service valves reduce installation time and costs.

Technical support:First level of support provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide for Coleman 18 SEER Echelon air conditioners, including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions, is available at www.upgnet.com or by request.

Noise reduction:The Coleman WhisperDrive™ system uses a swept-wing fan design adapted from aeronautic and defense engineering, isolated compressor compartment, composite base pan, and two-stage compressor design to provide up to four times’ quieter operation. Air flows smoothly off the fan blade, reducing turbulence and sound.

IAQ equipment:Compatible with a complete line of Coleman residential IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners, and whole-house humidifiers.

Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:Scroll compressor technology, two-stage design and WhisperDrive system help ensure reduced noise, even comfort levels, and improved energy efficiency. A full-service access panel makes maintenance easier, and a powder-paint topcoat applied over a baked-on primer results in a finish that provides 33 percent greater durability than conventional powder-coated finishes.

Warranties:Five-year limited parts and 10-year limited compressor. An optional premium system warranty offers limited lifetime compressor and 10-year parts when an 18 SEER Echelon air conditioner is matched with an approved Echelon furnace or a Unitary Products’ air handler and coil.

Special installation requirements:None.

Contact:Coleman, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.switchtocolemanac.com.

eProduct 180

Model:LX Series split system, CCJD

Footprint (inches):From 38 by 23.5 by 23.5 to 30 by 29 by 29 (13 SEER models)

Serviceability:Compact footprint makes it easier to install where space is limited. Fully exposed refrigerant connections and a single panel covering the electrical controls make for easier servicing of the unit. The microchannel coil is 30 percent lighter than conventional coils, enhancing serviceability.

Technical support:First level of support is provided by the distributor. Factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide for LX Series air conditioners, including wiring diagrams, sizes, parts, accessories, part numbers and installation instructions, is available at www.upgnet.com or by request.

Noise reduction:Upward airflow carries normal operating noise away from the living area. The rigid top panel isolates motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle normal fan motor and compressor operating sounds. The 14.5 SEER model incorporates a compressor blanket and swept-wing fan blade for even quieter operation.

IAQ equipment:Compatible with a complete line of Coleman residential IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners and whole-house humidifiers.

Thermostat compatibility:Compatible thermostats help provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:The unit’s compact footprint is the smallest in the industry, the company says. The unit features a microchannel coil with enhanced heat transfer characteristics, enabling it to achieve desired performance levels with less coil surface area. It also uses 50 percent less refrigerant.

Warranties:Five-year limited parts, five-year limited compressor (13 SEER); five-year limited parts, 10-year limited compressor (14.5 SEER).

Special installation requirements:None.

Contact:Coleman, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.colemansizedright.com.

eProduct 181

Comfort-Aire

Model:AHBV hydronic air handler

Footprint (inches):49 to 59 (w) by 21 to 22 (d)

Serviceability:Slide-out blower assembly makes service and maintenance fast; 3/4-inch water connections help ensure correct water supply lines; interlocking access panels are more easily removed. For convenience, wiring is color-coded and diagrams are mounted inside cabinet.

Technical support:Available at 517-787-2100 8 a.m.-5 p.m. Eastern, weekdays.

Technical materials:Installation-operation-maintenance manual and parts list can be e-mailed as PDFs or sent as hard copies; also available downloads from Website.

Noise reduction:Cabinet is lined with foil-faced insulation. Unit ramps up slowly to reduce start-up sound.

IAQ equipment:High-temperature nylon drain pans resist corrosion and bacterial growth.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Many parts are standardized.

Additional:A/C ready with aluminum fin-copper tube coil; TXV included. Variable-speed blower motor operates about 90 percent more efficiently than PSC motors and adjusts cfm to match static pressure of the system for improved air distribution and continual dehumidification. Includes post-purge timer for cooling, and freeze protection for heating and cooling.

Warranties:Five years; see printed warranty for details-limitations. AssurancePlus™ extended warranty coverage is available.

Special installation requirements:Can be installed vertical, horizontal left or right, and downflow. Line voltage terminal block and low-voltage terminal strip offer fast thermostat connection. Follow installation manual, standard industry practices, and local-national codes.

Contact:Comfort-Aire, Jackson, Mich.; attn: Mike Delwiche, 517-787-2100; 517-787-9341 (fax): info@heatcontroller.com; www.comfort-aire.com.

eProduct 182

Model:VMC Series ductless mini-split single zone

Footprint (inches):35 to 48 (w) by 7 to 8 (d) - indoor unit; 30 to 34 (w) by 10 to 13 (d) - outdoor unit.

Serviceability:Self diagnostics help simplify troubleshooting. Service ports and connections are located on the side of the condenser. Indoor units lift off hanging brackets and covers are quickly removed for service.

Technical support:Available at 517-787-2100 8 a.m.-5 p.m. Eastern, weekdays.

Technical materials:Installation-operation-maintenance, service manual, and parts list can be e-mailed as PDFs or sent as hard copies. Also available online to distributors.

Noise reduction:Exceptionally quiet because the dc compressor runs mostly at low speed, which also reduces vibration; high-tech fan on indoor unit moves large amounts of air at low speeds for quieter operation.

IAQ equipment:Triple filtration: electrostatic, antifungal, and deodorizing filters.

Thermostat compatibility:Built-in thermostat can be set using the wireless remote (included) or wired controls.

Replacement compatibility:Many parts across the V Series, especially 9,000-24,000 Btuh, are shared; others are unique.

Additional:Inverter technology saves 40 percent or more on energy consumption by matching compressor speed to demand; provides precise temperature control and continuous dehumidification (cooling mode) because unit runs constantly, although mostly at “economy” speed to maintain temperature efficiently. Cooling mode functions even when the outdoor temperature reaches 0°F.

Warranties:Six-year compressors, two-year other parts. See printed warranty for details-limitations. AssurancePlus™ extended warranty coverage available.

Special installation requirements:Follow installation manual, standard industry practices and local-national codes.

Contact:Comfort-Aire, Jackson, Mich.; attn: Mike Delwiche, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.comfort-aire.com.

eProduct 183

Comfortmaker

Model:PGX4 package gas-electric unit

Footprint (inches):47 (w) by 47 to 73 (d)

Serviceability:Externally mounted gauge ports allow for more accurate reading of operating conditions during service. Access to electrical and gas controls located behind one exterior panel. Adjustable electronic fan control.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Comfortmaker dealer Website (www.gocomfortmaker.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and variable-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Up to 14 SEER efficiency in a package gas-electric unit. An advanced Copeland Scroll UltraTech™ two-stage compressor quietly ramps up or down to provide more or less cooling or heating based on the needs of the home - eliminating uncomfortable temperature swings common to single-stage systems. Electronic integrated defrost control switches quietly from cooling to heating.

Warranties:Lifetime limited heat exchanger, 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the Comfortmaker seven-year No Hassle Replacement limited warranty. (If the compressor or covered coil fail within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) Extended service agreement is available on Comfortmaker products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:None.

Contact:Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.

eProduct 184

Model:SoftSound™ SXT+ split system

Footprint (inches):35 (w) by 37 (d)

Serviceability:Comfort- Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play), control accessories prepunched for attachment. Easy access to compressor, internal components. Three-piece grille panels are easier to remove separately to view and clean. Free-and-clear refrigerant tube stubs.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Comfortmaker dealer Website (www.gocomfortmaker.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and two-speed fan motors to produce minimal sound at maximum performance. High-performance compressor sound shield is standard.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Two-stage comfort, efficiencies up to 18 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow. An air management system (AMS) improves performance without increasing sound. ComfortAlert™ troubleshooting LED fault indicators diagnose system-related malfunctions.

Warranties:Ten-year limited compressor, 10-year limited outdoor coil, and seven-year limited parts. This product qualifies for the Comfortmaker 10-year No Hassle Replacement limited warranty. (If the compressor or covered coil fail within 10 years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Comfortmaker products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:TXV expansion devices recommended for maximum reliability. Units must be installed with a variable-speed fan coil or furnace.

Contact:Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.

eProduct 185

Daikin AC (Americas) Inc.

Model:AC Multi-Split 2 port

Footprint (inches):29 by 33 by 12 (outdoor)

Serviceability:Built-in self diagnostics, suitcase-style condensing unit cabinet, horizontal discharge air, compact and lightweight, serviceable-washable filter.

Technical support:Available at 972-245-1510, Monday-Friday, 8:30 a.m.-5 p.m. For more information, visit www.daikinac.com or call 866-432-4546 (866-4Daikin).

Technical materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide specs.

Noise reduction:The outdoor unit features a night quiet mode: When the temperature falls 9°F below the preset temperature, the mode automatically switches on. The night quiet mode can also be manually programmed. Setting the indoor unit to quiet operation will make the outdoor unit run more quietly.

IAQ equipment:FTXS/CTXS wall-mounted units feature an air purification filter with photocatalytic deodorizing function.

Thermostat compatibility:Daikin control system and wireless remote controllers are standard.

Replacement compatibility:Shares parts.

Additional:Choice of ducted or duct-free fan coils. Exceptional choice for home addition or new construction. Program capabilities allow consumers to adjust capacities when away and prioritize cooling and heating in rooms where the family spends the most time.

Warranties:Standard limited includes: Seven-year compressor, five-year parts, one-year limited labor.

Special installation requirements:R-410A certification, Daikin factory training, standard Daikin installation instructions. Service space and piping limitations must be followed as described in the engineering data book.

Contact:Daikin AC (Americas) Inc., Carrollton, Texas; attn: Marc Bellanger, 972-245-1510; 972-245-1038 (fax); marc.bellanger@daikinac.com; www.daikinac.com.

eProduct 186

Model:AC Multi-Split systems, four zones

Footprint (inches):30 (h) by 35 (w) by 13 (d), outdoor unit

Serviceability:Built-in self diagnostics, suitcase-style condensing unit cabinet, horizontal discharge air, compact and lightweight, serviceable-washable filter.

Technical support:Available at 972-245-1510, Monday-Friday, 8:30 a.m.-5 p.m. For more information, visit www.daikinac.com or call 866-432-4546 (866-4Daikin).

Technical materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide specs.

Noise reduction:The outdoor unit features a night quiet mode; when the temperature falls 9°F below the preset temperature, the mode automatically switches on. The night quiet mode can also be manually programmed. Setting the indoor unit to quiet operation will make the outdoor unit run quietly.

IAQ equipment:FTXS/CTXS wall-mounted units feature an air purification filter with photocatalytic deodorizing function.

Thermostat compatibility:Daikin control system and wireless remote controllers are standard.

Replacement compatibility:Shares parts.

Additional:Serves up to four rooms from only one outdoor unit. Each room’s temperature is controlled with a wireless remote controller. High energy efficiency (SEER ratings up to 19.5, HSPF ratings up to 9.5). Ideal for applications with limited installation space. Choice of ducted or duct-free fan coils among 112 combinations possible.

Warranties:Standard limited includes seven-year compressor, five-year parts, one-year limited labor.

Special installation requirements:R-410A certification, Daikin factory training, standard Daikin installation instructions. Service space and piping limitations must be followed as described in the engineering data book.

Contact:Daikin AC (Americas) Inc., Carrollton, Texas; attn: Marc Bellanger, 972-245-1510; 972-245-1038 (fax); marc.bellanger@daikinac.com; www.daikinac.com.

eProduct 187

Day & Night

Model:Constant Comfort™ SXT+ split system

Footprint (inches):35 (w) by 37 (d)

Serviceability:Innovative control box with easy-to-remove panel for troubleshooting, access to components (plug and play), control accessories prepunched for attachment. Easy access to compressor, internal components. Comfort Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Three-piece grille panels are easier to remove separately to view and clean. Free-and-clear refrigerant tube stubs.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Day & Night dealer Website (www.godayandnight.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:High-performance compressor sound shield is standard. Units are equipped with Copeland scroll compressors and two-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Two-stage comfort, efficiencies up to 18 SEER. Comfort Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow. An air management system (AMS) improves performance without increasing sound.

Warranties:Ten-year limited compressor, 10-year limited outdoor coil, and seven-year limited parts. This product qualifies for the Day & Night 10-year No Hassle Replacement limited warranty. (If the compressor or covered coil fail within 10 years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Day & Night products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:TXV expansion devices recommended for maximum reliability. Units must be installed with a variable-speed fan coil or furnace.

Contact:Day & Night, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.godayandnight.com.

eProduct 188

Model:PHX4 package heat pump

Footprint (inches):47 (w) by 27 to 73 (d)

Serviceability:Access to electrical and gas controls located behind one exterior panel. Externally mounted gauge ports allow more accurate reading of operating conditions during service.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Day & Night dealer Website (www.godayandnight.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and variable-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Up to 14 SEER efficiency in a package heat pump. An advanced Copeland Scroll UltraTech™ two-stage compressor quietly ramps up or down to provide more or less cooling or heating based on the needs of the home, eliminating uncomfortable temperature swings common to single-stage systems.

Warranties:Ten-year limited compressor, seven-year limited outdoor coil, and five-year limited parts. This product qualifies for the Day & Night seven-year No Hassle Replacement limited warranty. (If the compressor or covered coil fail within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Day & Night products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:None.

Contact:Day & Night, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.godayandnight.com.

eProduct 189

EarthLinked Technologies

Model:EarthLinked Model SC and SW Direct Geoexchange heat pump

Footprint (inches):28 (w) by 24 (d) by 25 (h)

Serviceability:Unit features EarthLinked Technologies Adaptiv™ refrigerant flow controls, which help make system charging simpler. Service valves help isolate earth loops from compressor unit. SW Model includes on-demand domestic water preheating.

Technical support:Available 8 a.m.-5 p.m. Eastern. Authorized dealers have access to after-hours phone support.

Technical materials:Application and system selection, installation, and service manuals available.

Noise reduction:Fully insulated cabinet, no outdoor fan.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shared components.

Additional:EarthLinked Direct Geoexchange uses highly conductive copper loops to transfer renewable energy from the earth, eliminating the indirect transfer medium found in water loop geo systems.

Warranties:Five-year compressor and refrigerant flow controls

Special installation requirements:Sold only through authorized, factory-trained installers.

Contact:EarthLinked Technologies, Lakeland, Fla.; attn: Joe Parsons, 863-701-0096; 861-701-7796 (fax); jparsons@earthlinked.com; www.earthlinked.com.

eProduct 190

EMI

Model:America Series UNCA/UNHA universal air handler

Footprint (inches):11 by 41 (small), 11 by 51 (medium), and 12 by 62 (large)

Serviceability:Unit-mounted controls incorporate a test feature for easier setup. Easier cabinet access to control area for electrical installation and service.

Technical support:Available Monday-Friday, 8 a.m.-5 p.m., at 315-797-1310.

Technical materials:Wiring diagrams, service-troubleshooting info, installation data, parts and part numbers.

Noise reduction:Manufacturer did not specify.

IAQ equipment:Washable, reusable filters.

Thermostat compatibility:Compatible with 24-V thermostat.

Replacement compatibility:Family of replacement parts.

Additional:Can be configured in ceiling or floor orientation for application flexibility. A wide range of heat pump (9,000 to 24,000) and straight-cool models (9,000 to 36,000) with electric heat are available.

Warranties:One year

Special installation requirements:Manufacturer did not specify.

Contact:EMI, Rome, N.Y.; attn: Sales, 716-366-5500; 716-366-4670 (fax); emi@enviromaster.com; www.enviromaster.com.

eProduct 191

FHP Manufacturing Co.

Model:Aquarius II-AP Series geothermal heat pump

Footprint (inches):21 (w) by 33 (d) by 66 (h)

Serviceability:Designed to be serviceable from the front of the unit, providing access to all components. Internal divider panel allows servicing of the refrigerant circuit when the unit blower is operating. The Unit Protection Module (UPM) monitors all unit safety and provides a fault code for simplified diagnostics. The service code can be sent to the unit thermostat. In addition, the comfort alert module provides additional service diagnostic capabilities. Foil-faced fiberglass insulation allows for easier, more-effective cleaning of the unit’s interior.

Technical support:Available at 954-776-5471.

Technical materials:Installation manuals, wiring diagrams, troubleshooting guide, parts list.

Noise reduction:Units come with FHP floating compressor base pan, reducing sound and vibration transmission to the building. Compressors come with sound-reducing acoustical blankets.

IAQ equipment:All units have stainless steel drain pans for easier cleaning; 2-inch, four-sided filter racks with removable door house MERV-11 high-efficiency filters.

Thermostat compatibility:Compatible with most heat pump thermostats.

Replacement compatibility:Most parts are common with other FHP products.

Additional:Designed to have the highest efficiency of any geothermal heat pump unit on the market today, the units are available with factory-installed resistance heat and heat recovery modules as options. A black-and-gold cabinet lends a touch of elegance to the unit, the company says.

Warranties:Standard 10-year compressor, five-year all other parts.

Special installation requirements:Units are factory equipped for geothermal applications.

Contact:FHP Manufacturing Co., Ft. Lauderdale, Fla.; attn: Florencia Hernandez, 954-776-5471; 954-776-5529 (fax); florencia.hernandez@fhp-mfg.com; www.fhp-mfg.com.

eProduct 192

First Co.

Model:WCXR/TTWR-HP through-the-wall condensing unit and heat pump

Footprint (inches):Varies.

Serviceability:All components are accessible from the rear of the unit.

Technical support:Available five days a week, 8 a.m.-5 p.m. Central.

Technical materials:Full brochures and installation instructions available and on the Website.

Noise reduction:Available options for sound dampening.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with all standard thermostats.

Replacement compatibility:Shares many parts with similar units.

Additional:These are the first through-the-wall condensing units and heat pump available with R-410A, the company said.

Warranties:One-year parts, five-year compressor.

Special installation requirements:A variety of First Co. R-410A fan coils are available.

Contact:First Co., Dallas; attn: Roger Cummins, 214-388-5751; 214-388-2255 (fax); rcummins@firstco.com; www.firstco.com.

eProduct 193

Friedrich Air Conditioning

Model:M36CF single-zone ductless split system

Footprint (inches):39 by 13 by 9 (indoor); 35 by 33 by 13 (outdoor)

Serviceability:Easier access lift-out, cleanable air filter. Removable front panel. Factory-installed access ports.

Technical support:Available 8 a.m.-4:30 p.m. Central at 800-541-6645.

Technical materials:Operating manual, service parts manual, and sales data.

Noise reduction:Internal tubing is insulated and the compressor is blanketed to provide acoustic dampening for the outdoor condensing unit. Indoor air handler features an ultra-quiet tangential blower wheel for great air distribution.

IAQ equipment:Washable, reusable filters. Variable-speed motors and variable-capacity compressor for improved air circulation and dehumidification. Continuous air sweep mode.

Thermostat compatibility:Factory supplied programmable re- mote control.

Replacement compatibility:Some commonality with other Friedrich models.

Additional:Commercial-grade features, including corrosion-resistant components, powder-coated, galvanized steel cabinet, and insulated wiring terminals. Curved coil technology in both indoor and outdoor units features specialized bent and angled coils to pack the most heat exchanger surface into a compact package for superior efficiencies. Microprocessor control in both the indoor and outdoor units are controlled by intelligent microprocessors that determine optimum running characteristics and self-diagnostics. Advanced inverter technology delivers greater energy efficiency and temperature precision with the added benefit of reducing energy costs. Ultra-high SEER rating and ozone-friendly R-410A are great environmental selling points.

Warranties:One-year parts, five-year compressor.

Special installation requirements:Refrigeration line sets in either 15- or 35-foot lengths from the factory. Or up to 164 feet field supplied on a maximum height difference of 98 feet.

Contact:Friedrich Air Conditioning, San Antonio, Texas; attn: Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.

eProduct 194

Model:PD Series digital PTAC with remote control

Footprint (inches):42 (w) by 14 (d) by 16 (h)

Serviceability:Internal diagnostics and service error code storage. Top-mounted antimicrobial air filters for quick access. Single-motor design means fewer parts to maintain. Tamper-resistant grille, clamshell motor, and dual thumbscrews.

Technical support:Available 8 a.m.-4:30 p.m. Central at 800-541-6645.

Technical materials:Installation-operations manual, service manual.

Noise reduction:Rated quietest in a hotel guest survey. Quiet stop-start fan delay feature that reduces transitional noise usually associated with compressor start-up. Quiet rotary compressor is mounted on vibration isolators. New air system moves air quietly and efficiently. Sleep setting is noticeably quieter.

IAQ equipment:Washable, reusable filters. Top-mounted antimicrobial air filters are easier to clean and reuse; protection from fungal and bacterial growth; filtered fresh air intake.

Thermostat compatibility:Compatible with most single-stage heat-cool thermostats. A digital, remote wall thermostat is hard-wired and can be battery powered or unit powered, and features a backlit display and multiple configuration modes for use on PD-Series PTACs.

Replacement compatibility:Some shared parts.

Additional:Optional remote control is new for 2008. Also good for ADA hotel rooms. Room temperature can be controlled from the comfort of the bed. Also, Diamonblue Technology comes on all units and protects against corrosion to extend the life of the unit. More than 40 standard features include one-touch operation with digital readout and fully functional remote control, constant comfort room monitoring, electronic temperature limiting, room freeze protection, digital defrost thermostat, random compressor restart, instant-heat heat pump mode, fan cycle control, emergency heat override, desk control ready and indoor coil frost sensor.

Warranties:One-year parts, five-year compressor.

Special installation requirements:Ships individually palletized to reduce the risk of shipping damage and to service both new construction and replacement.

Contact:Friedrich Air Conditioning, San Antonio, Texas; attn: Lynn Athey, 800-541-6645, ext. 707; contract@friedrich.com; www.friedrich.com.

eProduct 195

Frigidaire

Model:FT4BE heat pump

Footprint (inches):31 by 31

Serviceability:Easier compressor and control access. Easy-access, full-service refrigerant valves, removable top-grille assembly for quick service without disconnecting fan motor leads. Full port brass service valves provide low pressure drop and ease of service. The valves are actuated by one-quarter-turn full open to full close.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Technical literature library available online 24/7 (www.nordyne.com).

Noise reduction:Sound-absorbing base and swept-wing fan blade contribute to reduce unwanted noise.

IAQ equipment:Electronic air cleaners, humidifiers, media air cleaners, and zoning.

Thermostat compatibility:Compatible with standard thermostats.

Replacement compatibility:Shares replacement parts with other models in the line.

Additional:Includes high pressure switches, oversize liquid line filter-drier; durable, and louvered cabinet to protect unit from debris.

Warranties:Ten-year limited all parts, 10-year compressor; 10-year quality pledge to replace the unit if the compressor fails in the first 10 years when installed with a matched indoor air handler or coil.

Special installation requirements:This unit is matched with a TXV-equipped indoor section.

Contact:Frigidaire, O’Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.frigidaire.net.

eProduct 196

Model:R4GE single packaged gas-electric unit

Footprint (inches):56 by 48

Serviceability:High-low service ports offer quick access without disrupting operation.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise reduction:Compressor sound blanket standard.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shared parts.

Additional:Heavy-gauge, full-perimeter base rails; convertible air delivery; TXV factory installed; factory-installed variable speed.

Warranties:Ten-year limited parts, 10-year quality pledge, 10-year compressor.

Special installation requirements:None.

Contact:Frigidaire, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.frigidaire.net.

eProduct 197

Fujitsu General America

Model:Halcyon system 30RLXQ heat pump

Footprint (inches):13 by 39 by 9 (indoor unit); 33 by 35 by 13 (outdoor unit)

Serviceability:An LED lights up on the indoor unit when the unit needs to be cleaned. This occurs after about 400 hours of use.

Technical support:Available at 866-952-8324 9 a.m.-5 p.m. Eastern; 9 a.m.-8 p.m. Eastern April 1-Sept. 30.

Technical materials:Operation, installation, service manuals; detailed specs available on Website, CD-ROM; troubleshooting guides.

Noise reduction:The outdoor unit uses an engineered piercing-edge blade that increases the air volume across the condenser core while reducing air turbulence and noise for a quieter outdoor unit (down to 50 dB).

IAQ equipment:Electronic plasma air cleaner.

Thermostat compatibility:Comes with a programmable remote control.

Replacement compatibility:Parts are shared.

Additional:High SEER (15), environmentally friendly R-410A, built-in plasma filter on wall-mounted unit, provides low ambient operation rating (down to 0°F) right out of the box without modification, 24-hour timer, dry mode, auto restart-reset, extended line set of up to 165 feet for installation flexibility.

Warranties:Two-year parts, six-year compressor.

Special installation requirements:None.

Contact:Fujitsu General America, Fairfield, N.J.; attn: Roy Kuczera, 973-287-1635; 973-836-0447 (fax); rkuczera@fujitsugeneral.com; www.fujitsugeneral.com.

eProduct 198

Model:Halcyon Multi-Zone system heat pump

Footprint (inches):Varies.

Serviceability:An LED lights up on the wall-mounted unit when the unit needs to be cleaned. This occurs after about 400 hours of use.

Technical support:Available at 866-952-8324 9 a.m.-5 p.m. Eastern; 9 a.m.-8 p.m. Eastern April 1-Sept. 30.

Technical materials:Operation, installation, and service manuals; detailed specs available on Website, CD-ROM; troubleshooting guides.

Noise reduction:The outdoor unit’s engineered piercing-edge blade increases the air volume across the condenser core while reducing air turbulence and noise for a quieter outdoor unit (down to 50 dB).

IAQ equipment:Electronic plasma air cleaner in wall-mounted units.

Thermostat compatibility:The unit comes with a programmable remote control. Wall-mounted units come with a wireless remote control; concealed ceiling units come with a wired remote control.

Replacement compatibility:Shared parts.

Additional:High SEER (Up to 16.5), environmentally friendly R-410A, built-in plasma filter on wall-mounted unit, 24-hour timer, dry mode, auto restart-reset, low ambient, mix-match capability of indoor units creates 41 combinations with eight components; indoor units can be hidden or showcased.

Warranties:Two-year parts, six-year compressor.

Special installation requirements:None.

Contact:Fujitsu General America, Fairfield, N.J.; attn: Roy Kuczera, 973-287-1635; 973-836-0447 (fax); rkuczera@fujitsugeneral.com; www.fujitsugeneral.com.

eProduct 199

Goodman Manufacturing Co.

Model:SSX16 split system

Footprint (inches):29 (w) by 29 (d) by 38 (h)

Serviceability:Single-panel access to controls with space provided for field-installed accessories.

Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday, at 888-593-9988.

Technical materials:SSX16 spec sheet; installation, operation, technical, and service manuals.

Noise reduction:Goodman sound-control top design; high-quality, dense foam compressor sound blanket; compressor isolation by means of four resilient rubber mounts.

IAQ equipment:Compatible with the full line of the company’s IAQ accessories.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shares common components with other Goodman products.

Additional:Features energy efficiencies and operating sound levels that are among the best in the heating-cooling industry. With a high-efficiency Copeland scroll compressor and lifetime compressor limited warranty, the SSX16 is designed for the consumer who demands superior comfort, quiet operation, and environmentally friendly performance.

Warranties:Limited lifetime compressor, 10-year limited parts.

Special installation requirements:TXV required for indoor unit.

Contact:Goodman Manufacturing Co., Houston; attn: Rex Anderson, 713-263-5064; 713-586-8059 (fax); rex.anderson@goodmanmfg.com; www.goodmanmfg.com.

eProduct 200

Model:SSZ160361A heat pump

Footprint (inches):35 (w) by 35 (d) by 38 (h)

Serviceability:Designed for easier maintenance and access, the unit offers top and side compressor and tubing access. Service ports and controls are accessible while unit is operating. There are also high- and low-pressure switches and service valves with sweat connections and gauge ports.

Technical support:Available 7 a.m.-7 p.m. Central, Monday-Friday, at 888-292-6262.

Technical materials:SSZ16 spec sheet; installation, operation, technical, and service manuals.

Noise reduction:Acoustically engineered to be operationally quiet, it features a sound-reduction compressor sound blanket made of high-density foam; a louvered sound-control top for quiet operation; and three-blade fan designed for quiet operation.

IAQ equipment:Compatible with the full line of Amana IAQ accessories.

Thermostat compatibility:Compatible with two-stage thermostats.

Replacement compatibility:Shares common components with other Amana-Goodman products.

Additional:Unit has possibly the best warranty in the business, an outstanding lifetime compressor limited warranty, the company says. Quality features include multiple refrigerant leak tests during manufacturing; run-testing of the entire unit before shipment; a high-efficiency condenser coil made of corrugated aluminum fins; rifled refrigeration-grade copper tubing for maximum heat transfer.

Warranties:Limited lifetime compressor, 10-year parts replacement.

Special installation requirements:TXV required for indoor unit.

Contact:Goodman Manufacturing Co., Houston; attn: Rex Anderson, 713-263-5064; 713-586-8059 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 201

Heil

Model:PGX4 package gas-electric unit

Footprint (inches):47 (w) by 47 to 73 (d)

Serviceability:Access to electrical and gas controls is located behind one exterior panel. Externally mounted gauge ports allow for more accurate reading of operating conditions during service. Adjustable electronic fan control.

Technical support:Technical service advisor, on staff at local distributors, is available with technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Heil dealer Website (www.goheil.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and variable-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Up to 14 SEER efficiency in a package unit that offers gas heating and electric heating-cooling. An advanced Copeland Scroll UltraTech™ two-stage compressor quietly ramps up or down to provide more or less cooling or heating based on the needs of the home - eliminating uncomfortable temperature swings common to single-stage systems.

Warranties:Lifetime-limited heat exchanger, 10-year limited compressor, seven-year limited outdoor coil, and five-year limited warranty parts. This product qualifies for the Heil seven-year No Hassle Replacement Limited Warranty. (If the compressor or covered coil fail within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Heil products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:None.

Contact:Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goheil.com.

eProduct 202

Model:QuietComfort™ DXT+ split system

Footprint (inches):35 (w) by 37 (d)

Serviceability:Easy access to compressor, internal components. Three-piece grille panels are easier to remove separately to view and clean. ComfortAlert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Control box with easy-to-remove panel offers troubleshooting access to components (plug and play), control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.

Technical support:Technical service advisor, on staff at local distributors, is available with technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Heil dealer Website (www.goheil.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and two-speed fan motors to produce minimal sound at maximum performance. High-performance compressor sound shield is standard.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Offers efficiencies up to 18 SEER and two-stage comfort. Tight wire coil guard with 3/ 8 -inch spacing provides maximum protection with optimal airflow. An air management system (AMS) improves performance without increasing sound. ComfortAlert troubleshooting LED fault indicators diagnose system-related malfunctions.

Warranties:Ten-year limited compressor, 10-year limited outdoor coil, and seven-year limited parts. This product qualifies for the Heil 10-year No Hassle Replacement Limited Warranty. (If the compressor or covered coil fail within 10 years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Heil products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:TXV expansion devices recommended for maximum system reliability. Units must be installed with a variable-speed fan coil or furnace.

Contact:Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goheil.com.

eProduct 203

Lennox

Model:XC21 split system

Footprint (inches):36 by 40

Serviceability:Features the Lennox System Operations Monitor, which reviews system performance (similar to automotive diagnostic systems). For additional peace of mind and faster, easier service, it can communicate with select thermostats with a “call for service” indicator. The XC21 also features SmartHinge™ louvered panels, which can be removed in minutes for easier servicing and cleaning of the coil with the added benefit of complete coil protection.

Technical support:Available at 800-453-6669, 6:30 a.m.-6:30 p.m. Central.

Technical materials:Wiring diagrams, installation data, and engineering handbooks can be accessed through the Lennox davenet Website.

Noise reduction:SilentComfort™ fan grille uses passive vortex suppression to reduce air noise, specially designed fan blades reduce operating sound by directing discharge air vertically.

IAQ equipment:Supports all of the Healthy Climate® (HC) IAQ products, including Lennox PureAire™, HC MERV-16 and -10 filters, Humiditrol® whole-home dehumidifier, HC humidifier, HC germicidal lights, and HC ERV/HRV.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Some parts are unique, but the majority are shared with other Lennox air conditioner lines.

Additional:“The most quiet and efficient central air conditioner you can buy,” the company said. The XC21 has cooling efficiencies up to 20.5 SEER while being the quietest, at as low as 69 dB, in this ultra high-efficiency level. A two-stage scroll compressor features two levels of operation, high for hotter summer days and low for milder days. As an Energy Star® product, the XC21 meets the EPA’s standards by using less energy. It uses chlorine-free R-410A, and was engineered with SilentComfort™ technology, making it approximately 13 times quieter than a standard air conditioner.

Warranties:Ten-year parts, 10-year compressor (for residential installations). Extended warranties are available through CompleteCare Plus™.

Special installation requirements:TXVs are required.

Contact:Lennox, Richardson, Texas; attn: Natalie Hunter, 972-497-5000; www.lennox.com.

eProduct 204

Model:XP15 heat pump

Footprint (inches):36 by 40

Serviceability:Features the Lennox System Operations Monitor, which reviews system performance (similar to automotive diagnostic systems). SmartHinge™ louvered panels can be removed in minutes for easier servicing and cleaning of the coil with the added benefit of complete coil protection. Comes with fully serviceable brass service valves, and the suction valve can be fully shut off while the liquid valve may be front seated to manage refrigerant charge while servicing the system.

Technical support:Available at 800-453-6669, 6:30 a.m.-6:30 p.m. Central.

Technical materials:Wiring diagrams, installation data, and engineering handbooks can easily be accessed through the davenet Website.

Noise reduction:SilentComfort™ fan guard uses passive vortex suppression to reduce air noise, and specially designed fan blades reduce operating sound by directing discharge air vertically. A sand filled, polypropylene copolymer, compressor cover dramatically reduces compressor sound levels.

IAQ equipment:Supports all Healthy Climate® (HC) IAQ products, including the Lennox PureAire™, HC MERV-16 and -10 filters, Humiditrol® whole-home dehumidifier, HC humidifier, HC germicidal lights, and HC ERV/HRV.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Some parts are unique, others are shared with other Lennox air conditioner lines.

Additional:At 63 dB, the XP15 is now even quieter than before, the company said. Engineered with SilentComfort technology, it is approximately 40 times quieter than a standard heat pump.

Warranties:Ten-year parts, 10-year compressor (for residential applications). Extended warranties are available through CompleteCare Plus™.

Special installation requirements:TXVs are required.

Contact:Lennox, Richardson, Texas; attn: Natalie Hunter, 972-497-5000; www.lennox.com.

eProduct 205

LG Electronics USA

Model:Art Cool Inverter Series duct-free heat pump

Footprint (inches):292 to 433 square inches

Serviceability:Filters can be cleaned by lifting up the front panel. Two or three screws are removed to gain access to all components inside.

Technical support:Available at 888-865-3026, Monday-Friday, 8 a.m.-8 p.m. Eastern.

Technical materials:Installation manuals, service manuals, submittal data available on LG Website (www.lgusa.com).

Noise reduction:Manufacturer did not specify.

IAQ equipment:Four-stage patented plasma air purifying system; dehumidifying mode.

Thermostat compatibility:Wireless remote control included. Wireless wall-mounted LGE thermostat is also available.

Replacement compatibility:Shares replacement parts with other models.

Additional:Provides several panel color options matching with interior design; SEER ratings from 16 to 19.7.

Warranties:Three-year parts, five-year compressor. Extended service contracts available through Equigard.

Special installation requirements:Unit comes complete except for line sets.

Contact:LG Electronics USA, Lenexa, Kan.; attn: Steve Schmitt; 913-338-4278 (fax); sschmitt@lge.com; www.lgusa.com.

eProduct 206

Model:Multi V Mini Series heat pump

Footprint (inches):486 square inches

Serviceability:Pumpdown function to collect refrigerant during service. One-touch detachable panel of four-way cassette indoor unit makes for easier service and installation.

Technical support:Available at 888-865-3026, Monday-Friday, 8 a.m.-8 p.m. Eastern.

Technical materials:Engineering Product Data Book (wiring diagrams, service-troubleshooting info, installation data) provided from Website (www.lgeaircon.com).

Noise reduction:Night silent operation; BLDC fan motor in indoor unit reduces noise.

IAQ equipment:Neo plasma air-purifying system is equipped with seven specialized filters in five separate stages.

Thermostat compatibility:Dedicated LG thermostats.

Replacement compatibility:Shares replacement parts with other models.

Additional:Efficient ductless system can cover nine different spaces with one condensing unit. Each air handler can be individually controlled.

Warranties:Six-year compressor, one-year parts.

Special installation requirements:Check gas leakage after installation of refrigerant piping.

Contact:LG Electronics USA, Lenexa, Kan.; attn: Steve Schmitt; 913-338-4278 (fax); sschmitt@lge.com; www.lgusa.com.

eProduct 207

Luxaire

Model:Acclimate™ split system, AL8B

Footprint (inches):40 by 42 by 34

Serviceability:A full-end, full-service access panel with a handle provides access to internal components, and a slide-down control compartment and angled service valves help reduce installation time and costs.

Technical support:First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide, including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions, is available at www.upgnet.com or by request.

Noise reduction:The SilentDrive™ system uses a swept-wing fan design adapted from aeronautic and defense engineering, isolated compressor compartment, composite base pan, and two-stage compressor design to provide up to four times quieter operation. Air flows smoothly off the fan blade, reducing air turbulence and sound.

IAQ equipment:Compatible with a complete line of Luxaire residential IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners, and whole-house humidifiers.

Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:Innovative scroll compressor technology, two-stage design, and SilentDrive system help ensure reduced noise, even comfort levels, and improved energy efficiency. A full-service access panel makes maintenance easier, and a powder-paint topcoat applied over a baked-on primer results in a finish that provides 33 percent greater durability than conventional powder-coated finishes.

Warranties:Five-year limited parts, 10-year limited compressor; an optional premium system warranty offers limited lifetime compressor and 10-year parts when a Luxaire 18 SEER Acclimate air conditioner is matched with an approved Luxaire Acclimate furnace or a Unitary Products’ air handler and coil.

Special installation requirements:None.

Contact:Luxaire, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.luxairebelievesinme.com.

eProduct 208

Model:LX Series split system, LCJD

Footprint (inches):From 28 by 24 by 24 to 30 by 29 by 29 (13 SEER models)

Serviceability:The compact footprint makes it easier to install where space is limited. Fully exposed refrigerant connections and a single panel covering the electrical controls make for easier servicing of the unit. The microchannel coil is 30 percent lighter than conventional coils, enhancing serviceability.

Technical support:First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide, including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions, is available at www.upgnet.com or by request.

Noise reduction:The upward airflow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle normal fan motor and compressor operating sounds. The 14.5 SEER model incorporates a compressor blanket and swept-wing fan blade for quieter operation.

IAQ equipment:Compatible with a complete line of residential IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners and whole-house humidifiers.

Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:The unit’s compact footprint is the smallest in the industry. The unit features a microchannel coil with enhanced heat transfer characteristics, enabling it to achieve desired performance levels with less coil surface area than competitive units. It also uses 50 percent less refrigerant than competitors’ condensers.

Warranties:Five-year limited parts, five-year limited compressor (13 SEER); five-year limited parts, 10-year limited compressor (14.5 SEER).

Special installation requirements:None.

Contact:Luxaire, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.luxmidclass.com.

eProduct 209

Maytag

Model:iHybrid PDF2SE dual fuel package system

Footprint (inches):56 by 48

Serviceability:High-low service ports are provided for quick access without disrupting operation.

Technical support:Available 8 a.m.-4:30 p.m. Central at 866-262-9824 (866-2MAYTAG).

Technical materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise reduction:Compressor sound blanket is standard.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Dual-fuel thermostat.

Replacement compatibility:Shares parts.

Additional:Heavy-gauge, full-perimeter base rails, convertible air delivery, TXV factory installed, factory-installed variable speed.

Warranties:Twelve-year limited parts, 12-year Dependability Promise, 12-year compressor, 12-year labor ESA available.

Special installation requirements:None.

Contact:Maytag, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.maytaghvac.com.

eProduct 210

Model:PPH1SE packaged heat pump

Footprint (inches):56 by 48

Serviceability:High-low service ports are provided for quick access without disrupting operation.

Technical support:Available 8 a.m.-4:30 p.m. Central at 866-262-9824 (866-2MAYTAG).

Technical materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise reduction:Compressor sound blanket is standard.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shares parts.

Additional:Heavy-gauge, full-perimeter base rails, convertible air delivery, TXV factory installed, factory-installed variable speed.

Warranties:Twelve-year limited parts, 12-year Dependability Promise, 12-year compressor, 12-year labor ESA available.

Special installation requirements:None.

Contact:Maytag, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.maytaghvac.com.

eProduct 211

McQuay

Model:Applied packaged terminal air conditioner and heat pump, Model PDAC/PDHP

Footprint (inches):Fits 16 by 42 and 16 by 44 wall sleeve.

Serviceability:Slide-in/slide-out configuration makes it easier to access the electric heater, indoor and outdoor fans, motors, and compressor. Easier-to-read LED diagnostics remove the guesswork in troubleshooting a unit.

Technical support:Contact local McQuay representative. See sales and service locators at www.mcquay.com.

Technical materials:All product and service literature is available at www.mcquay.com.

Noise reduction:Cross-tangential fan wheel design provides whisper-quiet operation while delivering maximum airflow required for proper air circulation. Separate indoor and outdoor fan motors further reduce operating sound levels and costs. Heavy-gauge construction of the chassis and cabinet and vibration isolators on compressor minimize vibration for quieter operation. Fully insulated unit bulkhead reduces outdoor sound transmission.

IAQ equipment:Manual or automatic (optional) fresh air damper. Cleanable filters. Positive sloped drain pan promotes condensate removal to eliminate standing water.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shares parts.

Additional:The broadest selection of features and customizable options (specializing in hydronic options) allows contractors to choose the ideal unit for new construction and replacement applications. High energy efficiency and COP ratings provide lower operating costs. Reliable cooling-heating and low operating sound levels maximize comfort. Proven institutional-grade construction withstands demanding applications.

Warranties:Contact local McQuay representative for warranty details. See sales and service locators at www.mcquay.com.

Special installation requirements:None.

Contact:McQuay; 800-432-1342; 763-553-5177 (fax); mcquayintl@mcquay.com; www.mcquay.com.

eProduct 212

Mitsubishi Electric

Model:Mr. Slim® M-Series MXZ-4A36NA heat pump

Footprint (inches):36 (w) by 12 (d) by 35 (h)

Serviceability:Complete built-in self-diagnostics directs a technician to a specific issue; washable filters speed up routine maintenance; convenient front, side, and top panels allow for access to serviceable components; reliable system components.

Technical support:Available at 877-391-5550, 8 a.m.-7 p.m. Eastern

Technical materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available at www.mehvac.com.

Noise reduction:The outdoor unit is extremely quiet thanks to the inverter-driven compressor, which features rotation frequency modulation plus low starting and stopping rotation.

IAQ equipment:The indoor units help improve IAQ in two ways. An anti-allergy enzyme filter, uses an artificial blue enzyme catalyst on the filter filaments, capturing harmful microbes and reducing allergens, germs and bacteria. Environmentally sound and hybrid catechin prefilters (with fibers deeply infused with a bioflavonoid found in green tea) have antiviral and antioxidant properties, which help reduce odors and bacteria.

Thermostat compatibility:Wireless remote controller (Mr. Slim M-Series) offers enhanced features beyond thermostat capabilities, like dry mode for controlling humidity and powerful mode for rapid setpoint satisfaction. Optional hard wired remote controller offers link to Mitsubishi Network (M-Net) for advanced control of multiple systems through the City Multi Controls Network (CMCN).

Replacement compatibility:Product shares most replacement parts with other M-Series models.

Additional:Revolutionary inverter heat pump technology provides greater heating performance than ever before allowing you to size a system to the heat load. The variable nature of this technology allows the system to operate at whatever level is needed to match cooling or heating requirements.

Warranties:Limited six-year compressor and one-year parts (two-year parts for factory-trained Mitsubishi Diamond Dealers™).

Special installation requirements:New A-Control system has an indoor unit that is powered through the outdoor unit. Three polarity-sensitive wires, plus a ground conductor run from the outdoor to indoor unit, providing both power and communication. Additional adapters help add wall-mounted controller and to connect to the M-Net and CMCN.

Contact:Mitsubishi Electric, Suwanee, Ga.; attn: Barbara Renaud, 678-376-2868; 800-658-1458 (fax); brenaud@hvac.mea.com; www.mehvac.com.

eProduct 213

NuTone

Model:FS4BI split system

Footprint (in inches):31 by 31

Serviceability features:Easy compressor and control access. Easy access full service refrigerant valves, removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support:Available at 422-4328 (4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.

Technical support materials:Technical literature library online available 24/7 at www.nordyne.com.

Noise-reduction features:Sound-absorbing base, swept-wing fan blade, and compressor sound blanket all contribute to reduce unwanted noise.

IAQ equipment supported:Electronic air cleaners, humidifiers, compatible with Arzel Zoning.

Thermostat compatibility:A special thermostat / controller is an integral part of the system.

Replacement parts compatibility:Manufacturer did not specify.

Additional features:The iQ Drive air conditioning system brings innovative new technology and a new level of comfort to the American home. The system features fully variable speed compressor technology and variable speed indoor and outdoor motors and also provides variable cooling capacity as needed to meet comfort requirements. The iQ Drive provides unprecedented efficiencies to the homeowner – the highest SEER ratings in the industry.

Warranty information:Standard 10-year limited all parts, 10-year compressor. Ten-year Quality Pledge to replace the unit if the compressor fails in the first 10 years when installed with a matched indoor coil or air handler.

Special installation requirements:An electronic expansion valve is part of the indoor evaporator. Training and certification is required to work on the iQ Drive inverter system.

Contact:NuTone, O’Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.nutonehvac.com.

Model:Q6SD package heat pump

Footprint (in inches):56 by 48

Serviceability features:High-/low- service ports are provided for quick access without disrupting operation.

Technical support:Available at 422-4328 (4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.

Technical support materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise-reduction features:Manufacturer did not specify.

IAQ equipment supported:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement parts compatibility:Shares parts.

Additional features:Heavy gauge full perimeter base rails, convertible air delivery, TXV factory installed.

Warranty information:10-year limited parts, 10-year Quality Pledge, 10-year compressor.

Special installation requirements:None.

Contact:NuTone, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.nutonehvac.com.

Payne Heating and Cooling

Model:PA13NA split system

Footprint (inches):23 by 23

Serviceability:This R-410A air conditioning unit offers an extremely small footprint. This unit is less than 2 feet by 2 feet square up through 3 tons cooling. Dealers will appreciate the small size of this unit during installation and service.

Technical support:Available at 888-877-2963 (888-87PAYNE) 24 hours a day, seven days a week.

Technical materials:Product data sheets, installation instructions, and service manuals are available in all local Totaline stores or through local Payne distributors.

Noise reduction:Manufacturer did not specify.

IAQ equipment:Payne recommends this product to be equipped with Totaline IAQ products.

Thermostat compatibility:Will work with any cooling thermostat.

Replacement compatibility:Manufacturer did not specify.

Additional:The Department of Energy has mandated a non-ozone-depleting refrigerant, such as R-410A, in all products manufactured in 2010 or later. New Payne R-410A air conditioning product footprints are among the smallest in the industry. The 18- through 36-kBtuh units are in a cabinet that is less than 2- by 2-foot in footprint. The 42- through 60-kBtuh units are in a footprint just larger than 2.5 by 2.5 feet. These 13 SEER units can fit through a 3-foot fence gate, door, or property line.

Warranties:Limited 10-year parts and compressor limited on all a/c, heat pump and furnace products. Online registration is required to qualify for 10-year limited warranty.

Special installation requirements:Manufacturer did not specify.

Contact:Payne Heating and Cooling, Indianapolis; attn: Tom Archer, 317-240-5231; tom.archer@carrier.utc.com; www.payne.com.

eProduct 214

Rheem Heating and Cooling

Model:RPPL-JEZ heat pump

Footprint (inches):From 19 to 33 (h) by 41 to 44 (l) by 28 to 32 (d)

Serviceability:Industry-exclusive top- and side-service accessibility; the compressor and controls are isolated from the airstream for quick, un-obstructed access to refrigerant line connections, the compressor, and control wiring. All refrigerant connections are located on the exterior and the enclosed control box is located in the unit’s top corner for added safety and serviceability. A removable top grille provides access to the outdoor fan motor and outdoor coil.

Technical support:Available for Rheem distributors and contractors throughout North America, or at www.rheemote.net.

Technical materials:Available for Rheem distributors and contractors throughout North America, or at www.rheemote.net.

Noise reduction:Standard compressor sound blanket; upward air discharge with minimum air restriction; single-speed, eight-pole fan motor and hot gas muffler are all designed to help reduce noise.

IAQ equipment:All IAQ products suitable for heat pumps will work. Rheem distributors offer a wide range of compatible IAQ products, including ERVs/HRVs, UV lights, and the IAQ-1 home system.

Thermostat compatibility:Operational with most heat pump thermostats but recommended with Rheem and Protech 100-, 200-, and 300-Series thermostats.

Replacement compatibility:Common cabinet and components with standard efficiency models.

Additional:The award-winning Comfort Control system provides onboard diagnostics and fault history on a 24/7/365 basis. System can communicate fault codes through industry-exclusive seven-segment LED display that quickly and accurately shows technicians the source of system malfunctions. Integrated diagnostics provide Active Protection and prevent compressor operation when potentially damaging conditions are present. Features heavy-duty sheet metal cabinet with fully louvered coil protection and 1,000-hour-rated, baked-on powder-coat paint. Also features high- and low-pressure controls and a hard-start kit.

Warranties:Ten-year limited compressor with five-year conditional unit replacement guarantee; five-year parts.

Special installation requirements:Filter-drier is included from the factory, and precharged with R-410A for 15 feet. It is install-ready for either a standard- or a high-efficiency ECM air handler.

Contact:Rheem Heating and Cooling, Decatur, Ga.; attn: Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.rheemac.com.

eProduct 215

Robur Corp.

Model:GAHP-W heat pump

Footprint (inches):34 (w) by 26 (d) by 51 (h)

Serviceability:Self-diagnostic microprocessor control with LED readout to display unit operating parameters and fault codes to assist with servicing. All serviceable components are located in easy-access control area at front of unit.

Technical support:Available at 888-424-1800, Monday-Friday, 8 a.m.-5 p.m. Central.

Technical materials:Full line of technical support materials available at www.robur.com/us, or call 888-424-1800.

Noise reduction:The company boasts some of the lowest noise equipment available; sound-attenuation kits are available for further noise reduction.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Compatible with other Robur lines.

Additional:The GAHP-W is a water-to-water heat pump consuming 0.4 kWh to produce chilled and hot water while utilizing the gas-fired absorption cycle to produce gas heating efficiencies over 100 percent.

Warranties:Three-year limited with extended warranties available.

Special installation requirements:Hydronic heating-cooling installation requirements.

Contact:Robur Corp., Evansville, Ind.; attn: Scott Ward, 812-424-1800; 812-422-5117 (fax); sward@robur.com; www.robur.com/us.

eProduct 216

Ruud

Model:UPPL-JEZ heat pump

Footprint (inches):From 19 to 33 (h) by 41 to 44 (l) by 28 to 32 (d)

Serviceability:Industry-exclusive top- and side-service accessibility. The compressor and controls are isolated from the airstream for quick, unobstructed access to refrigerant line connections, the compressor, and control wiring. All refrigerant connections are located on the exterior, and the enclosed control box is located in the unit’s top corner for added safety and serviceability. The unit features a removable top grille, which provides access to the outdoor fan motor and outdoor coil.

Technical support:Available for Ruud distributors and contractors throughout North America, or at www.rheemote.net.

Technical materials:Available for Ruud distributors and contractors throughout North America, or at www.rheemote.net.

Noise reduction:Standard compressor sound blanket; upward air discharge with minimum air restriction; single-speed, eight-pole fan motor and hot gas muffler are designed to help reduce noise.

IAQ equipment:All IAQ products suitable for heat pumps will work. Ruud distributors offer a wide range of compatible IAQ products, including ERVs/HRVs, UV lights, and the IAQ-1 home system.

Thermostat compatibility:Operational with most heat pump thermostats, but recommended with Ruud and Protech 100-, 200-, and 300-Series thermostats.

Replacement compatibility:Common cabinet and components with standard-efficiency models.

Additional:The award-winning Comfort Control system provides onboard diagnostics and fault history on a 24/7/365 basis. System can communicate fault codes through industry-exclusive seven-segment LED display that quickly and accurately shows technicians the source of malfunctions. Integrated diagnostics provide Active Protection and prevent compressor operation when potentially damaging conditions are present. Features heavy-duty sheet metal cabinet with fully louvered coil protection and 1,000-hour-rated, baked-on powder-coat paint. Also features high and low pressure controls and a hard-start kit.

Warranties:Ten-year limited compressor with five-year conditional unit replacement guarantee. Five-year parts.

Special installation requirements:Filter-drier is included from the factory, and precharged with R-410A for 15 feet. It is install-ready for either a standard- or a high-efficiency ECM air handler.

Contact:Ruud, Decatur, Ga.; attn: Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.ruudmac.com.

eProduct 217

Tappan

Model:FS4BE split system

Footprint (inches):31 by 31

Serviceability:Easier compressor and control access. Easy-access, full-service refrigerant valves, removable top-grille assembly for quick service without disconnecting fan motor leads. Full port brass service valves provide low pressure drop and ease of service. The valves are actuated by one-quarter-turn full open to full close.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Technical literature library available online 24/7 at www.nordyne.com.

Noise reduction:Sound-absorbing base and swept-wing fan blade contribute to reduce unwanted noise.

IAQ equipment:Electronic air cleaners, humidifiers, media air cleaners, and zoning.

Thermostat compatibility:Compatible with standard thermostats.

Replacement compatibility:Shares replacement parts with other models in the line.

Additional:Includes high pressure switches, oversize liquid line filter-drier; durable louvered cabinet to protect unit from debris.

Warranties:Ten-year limited all parts, 10-year compressor. 10-year quality pledge to replace the unit if the compressor fails in the first 10 years when installed with a matched indoor air handler or coil.

Special installation requirements:This unit is matched with a TXV-equipped indoor section.

Contact:Tappan, O’Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.tappan.net.

eProduct 218

Model:P6SD single packaged air conditioner

Footprint (inches):56 by 48

Serviceability:High-low service ports provided for quick access without disrupting operation.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise reduction:Manufacturer did not specify.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shared parts.

Additional:Heavy-gauge, full-perimeter base rails, convertible air delivery, TXV factory installed.

Warranties:Ten-year limited parts, 10-year quality pledge, 10-year compressor.

Special installation requirements:None.

Contact:Tappan, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.tappan.net.

eProduct 219

Tempstar

Model:PDX4 package dual-fuel heat pump

Footprint (inches):47 (w) by 47 to 73 (d)

Serviceability:Externally mounted gauge ports allow for more accurate reading of operating conditions during service. Access to electrical and gas controls located behind one exterior panel. Adjustable electronic fan control.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Tempstar dealer Website (www.gotempstar.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:Units are equipped with Copeland scroll compressors and variable-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Up to 14 SEER efficiency in a package heat pump with gas backup for year-round efficiency. An advanced Copeland Scroll UltraTech two-stage compressor quietly ramps up or down to provide more or less cooling or heating based on the needs of the home, eliminating uncomfortable temperature swings common to single-stage systems.

Warranties:Lifetime-limited heat exchanger, 10-year limited compressor, 10-year limited outdoor coil, and seven-year limited parts. This product qualifies for the Tempstar 10-year No Hassle Replacement Limited Warranty. (If the compressor or covered coil fail within 10 years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Tempstar products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:None.

Contact:Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gotempstar.com.

eProduct 220

Model:SmartComfort™ TXT+ split system

Footprint (inches):35 (w) by 37 (d)

Serviceability:Comfort Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play), control accessories prepunched for attachment. Easy access to compressor, internal components. Three-piece grille panels are easier to remove separately to view and clean. Free-and-clear refrigerant tube stubs.

Technical support:Technical service advisors at local distributors can provide technical assistance and troubleshooting. Technical training available at ICP Mobile Training Centers at locations nationwide and at field schools held at participating distributorships.

Technical materials:Product information posted online at Tempstar dealer Website (www.gotempstar.com) includes spec sheets, installation-operation manuals, and technical support-parts manuals.

Noise reduction:High-performance compressor sound shield is standard. Units are equipped with Copeland scroll compressors and two-speed fan motors to produce minimal sound at maximum performance.

IAQ equipment:A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Parts standardized throughout the line.

Additional:Provides two-stage comfort with efficiencies up to 18 SEER. An air management system (AMS) improves performance without increasing sound. ComfortAlert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Tight wire coil guard with 3/ 8 -inch spacing provides maximum protection with optimal airflow and ease of service. Kickplate across front bottom and corners for extra protection from dents and dings.

Warranties:Ten-year limited compressor, 10-year limited outdoor coil, and seven-year limited parts. This product qualifies for the Tempstar 10-year No Hassle Replacement Limited Warranty. (If the compressor or covered coil fail within 10 years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Tempstar products. The optional Homeowner’s Extended Labor Plan (HELP®) offers five-, seven-, and 10-year plans.

Special installation requirements:TXV expansion devices recommended for maximum system reliability. Units must be installed with a variable-speed fan coil or furnace.

Contact:Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gotempstar.com.

eProduct 221

Texas Furnace

Model:Meridian and TFC split system

Footprint (inches):30 by 36

Serviceability:Electrical operational controls are accessible with the removal of just one screw.

Technical support:Available at 713-466-1504 from 7:30 a.m.-5 p.m., Monday-Friday.

Technical materials:Service and technical information is available and may also be accessed at www.texasfurnace.com.

Noise reduction:Injection-molded top absorbs compressor and air movement sounds.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:No special components needed.

Replacement compatibility:Nearly all parts are common between the 13 and 14 SEER units.

Additional:2AC14 Series air conditioners use a highly efficient microchannel coil. All units have the same footprint. Units are compact with the 5-ton unit being 36.5 inches tall. Powder-painted, louvered exterior is both and durable.

Warranties:Ten-year limited.

Special installation requirements:A TXV is required to achieve rating. May be coupled with low-profile MAX coils for maximum capacity but with minimum height.

Contact:Texas Furnace, Houston; attn: Francis Franck, 713-466-1504; 713-466-3648 (fax); francis@allstyle.com; www.texasfurnace.com.

eProduct 222

Thermo Pride

Model:Premiere Series split system

Footprint (inches):29 (w) by 30 (d) by 36 (h)

Serviceability:Accessible service valves with charging port, self-diagnostic LED panel; easily removed service panel allows access to inside of unit.

Technical support:Available at 574-896-2133 8 a.m.-4 p.m. Central, Monday-Friday.

Technical materials:Installation and operation manual available to contractors.

Noise reduction:Manufacturer did not specify.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Manufacturer did not specify.

Replacement compatibility:Manufacturer did not specify.

Additional:Manufacturer did not specify.

Warranties:Manufacturer did not specify.

Special installation requirements:Manufacturer did not specify.

Contact:Thermo Pride, Lancaster, Pa.; 574-896-2133; 574-896-5301 (fax); tpmarketing@thermopride.com; www.thermopride.com.

eProduct 223

Tili Electrical

Model:TE Series, Model TE018HWL geothermal heat pump

Footprint (inches):24 by 23

Serviceability:This unit is built with 20-gauge powder-coated metal with access panels on all sides for easier access. The refrigerant ports are easy access inside the unit.

Technical support:Available 8 a.m.-5 p.m. Pacific, Monday to Friday at 888-430-8454.

Technical materials:All technical books are supplied with all units, with a page for troubleshooting and parts available in the warehouse.

Noise reduction:The blower compartment is fully insulated with sound-defusing material. The compressor compartment is isolated with a sound-dampening material and the compressor with a compressor blanket as well.

IAQ equipment:Desuperheater that will provide domestic hot water is included with the unit. On-site filter upgrade.

Thermostat compatibility:Unit comes with a Smart-Sense™ controller. The microcomputer on board monitors every function and communicates any errors that may occur to the controller. Entering and leaving water temperatures, entering air temperature, coil frost sensor, as well as coil refrigerant temperature are monitored and used to identify the heat pump status at any given time.

Replacement compatibility:Shares replacement parts with other models.

Additional:This unit monitors itself and if any of the sensors fail, the unit will shut down and an error code will be displayed on the controller identifying the specific sensor that needs to be replaced. When the problem is solved, the unit will reset itself automatically.

Warranties:One-year parts, five-year compressor. Extended warranties are available.

Special installation requirements:Loop pump and domestic water pump are not included.

Contact:Tili Electrical, Burnaby, B.C., Canada; attn: Pierre Sarazin, 604-430-8493; 604-430-8497 (fax); pierre@tiliglobal.com; www.tili-northamerica.com.

eProduct 224

Model:TE Series (console) Model TE09H1WZ geothermal heat pump

Footprint (inches):44 by 11

Serviceability:This unit is built with 20-gauge powder-coated metal with access panels on side and back.

Technical support:Available 8 a.m.-5 p.m. Pacific, Monday to Friday at 888-430-8454.

Technical materials:All technical books are supplied with all units, with a page for troubleshooting and parts are available in the warehouse.

Noise reduction:Insulated inside with sound-diffusing material.

IAQ equipment:Air filter size - 29 by 11 inches.

Thermostat compatibility:Unit comes with a Smart-Sense™ controller. The microcomputer on board monitors every function and communicates any errors that may occur to the controller. Entering and leaving water temperatures, entering air temperature, coil frost sensor, as well as coil refrigerant temperature are monitored and used to identify the heat pump status at any given time.

Replacement compatibility:Shares replacement parts with other models.

Additional:This unit monitors itself and if any of the sensors fail, the unit will shut down and an error code will be displayed on the controller identifying the specific sensor that needs to be replaced. When the problem is solved, the unit will reset itself automatically.

Warranties:One-year parts, five-year compressor. Extended warranties are available.

Special installation requirements:Loop pump and domestic water pump are not included.

Contact:Tili Electrical, Burnaby, B.C., Canada; attn: Pierre Sarazin, 604-430-8493; 604-430-8497 (fax); pierre@tiliglobal.com; www.tili-northamerica.com.

eProduct 225

Trane

Model:XL16c packaged heat pump

Footprint (inches):38 (h) by 51(w) by 41 (d)

Serviceability:Locating critical components is easier with independently removable embossed service panels. The slide-out Vortica blower is mounted by a single fastener. Secured with rotolock fittings, the Climatuff compressor is located in the left corner compartment. Inverted outdoor fan and motor design allows for easier removal and service.

Technical support:Contact local Trane distributor.

Technical materials:ComfortSite Internet site for Trane dealers and distributors allows quick access to the most current support materials, including catalog pages, installer guides, service facts, dealer sheets, product data, submittals, and owner manuals.

Noise reduction:The quietest unit at every tonnage, with sound levels as low as 70 dB. The variable-speed blower fan motor and Comfort-R controls help eliminate noisy start-up and shut-down. Super-quiet high-efficiency ducted fan moves air with an aerodynamic blade.

IAQ equipment:Accessories include the FreshEffects ERV, which removes stale indoor air and replaces it with an equal amount of fresh outdoor air. Motorized and manual fresh air dampers and economizers can provide up to 25 percent fresh air to the conditioned space. Available humidifiers prevent dryness and reduce static electricity.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shares with other models in the line.

Additional:With some of the highest SEER ratings for packaged heat pump systems in the industry, the XL16c is ideal for customers looking to save on energy costs and enjoy total comfort all season long.

Warranties:Ten-year compressor and condenser coil, five-year parts.

Special installation requirements:Easily converted for horizontal or vertical applications. Factory-built 12- and 18-inch duct covers for clean, horizontal installation. Panhead screws on supply and return panel for flush-fit duct connections. Easier electrical and gas connections on the right side.

Contact:Trane, Tyler, Texas; attn: Louis Cook, 903-581-3566; 903-579-7835 (fax); louis.cook@trane.com; www.trane.com.

eProduct 226

Model:XL19i heat pump and split system

Footprint (inches):37 by 34

Serviceability:Charge Assist™ automatic and accurate refrigerant charging. ComfortLink™ II digital communications enables automatic system setup and enhanced diagnostics, plus it only needs two wires to the outdoor unit for any combination. ComfortLink II digital communications also allows the outdoor unit Charge Assist function to be further automated by turning on the indoor unit to the correct airflow for charging.

Technical support:Contact local Trane distributor.

Technical materials:ComfortSite Internet site for Trane dealers and distributors allows quick access to the most current support materials, including catalog pages, installer guides, service facts, dealer sheets, product data, submittals, and owners’ manuals.

Noise reduction:Compressor sound insulator is standard on this model.

IAQ equipment:Trane Clean Effects™ removes up to 99.98 percent of airborne allergens as small as 0.1 microns and more than 99 percent of the common flu, or influenza A virus, from the filtered air.

Thermostat compatibility:Can be connected to either a special digital communicating thermostat or a standard 24-V thermostat (with a wiring harness adaptor).

Replacement compatibility:Most parts are common. The electronic control is unique.

Additional:ComfortLink and Charge Assist. Also, dual reciprocating compressors and Spine Fin™ coil. Weather Guard™ tops and Dura Tuff™ base pans.

Warranties:Ten-year all parts.

Special installation requirements:None.

Contact:Trane, Tyler, Texas; attn: Louis Cook, 903-581-3566; 903-579-7835 (fax); louis.cook@trane.com; www.trane.com.

eProduct 227

WaterFurnace

Model:Envision™ horizontal- and bottom-flow all-in-one comfort system

Footprint (inches):23 (w) by 27 (d) to 25 (w) by 63 (d)

Serviceability:Designed with the service technician in mind, the Envision features hinged doors for access to system components, field-adjustable filter racks, status lights on the front of the unit for easier field service, and onboard diagnostics to help technicians get it right every time.

Technical support:The tech-service pager, at 800-455-3624, is available 24/7. Technical support is available 8 a.m.-5 p.m. Eastern through the main customer service line (888-929-2837).

Technical materials:Contractors have access to a secure site at www.waterfurnace.com, where they can download spec manuals, installation manuals, service and troubleshooting guides, diagrams, and part information.

Noise reduction:Systems achieve whisper-quiet operation through innovative design and premium components. Models come with quiet-running, two-speed scroll compressors mounted on double-isolation plates made of acoustic metal. The compressor includes a blanket for superior noise reduction. In addition, cabinets are fully insulated, making them even quieter. Units are located indoors, so homeowners can get rid of their outdoor condensing units.

IAQ equipment supported:Comes standard with a MERV 11 filter and can be upgraded with a complete line of WaterFurnace IAQ products. Upgrade filters include HEPA filters; heat recovery ventilators; electronic air cleaners; humidifiers; drain pan fresheners; and 4-inch MERV 11 filters with an optional carbon insert.

Thermostat compatibility:Shares many replacement parts among the models within its product series.

Replacement compatibility:Shares parts with other systems in WaterFurnace product line.

Additional:Envision products take cooling to a new standard of efficiency, performance, reliability, and quiet operation. The Envision provides energy savings up to 70 percent. Coupled with today’s best thermostats and integrated monitoring system, it provides fine comfort and reliability.

Warranties:Ten-year parts and labor allowance.

Special installation requirements:Requires the installation of geothermal ground loop system. The type of loop used is based on available land space and installation costs for specific areas.

Contact:WaterFurnace, Fort Wayne, Ind.; attn: Andy Fracica, 260-479-3210; 866-272-4387 (fax); andy.fracica@waterfurnace.com; www.waterfurnace.com.

eProduct 228

Model:Envision Split NDZ038 all-in-one comfort system

Footprint (inches):19 to 21 (h) by 23 to 26 (w) by 27 to 32 (d)

Serviceability:Hinged doors provide access to system components; status lights on the front of the unit facilitate service diagnostics; a ComfortAlert control module signals compressor faults to the thermostat, and onboard diagnostics to help technicians get it right every time.

Technical support:The tech-service pager (800-455-3624) is available 24/7. Technical support is available 8 a.m.-5 p.m. Eastern through the main customer service line (888-929-2837).

Technical materials:Contractors have secured online access at www.waterfurnace.com to the spec catalogue SP1592, installation manual IM1592, Envision quick reference guide QR1585, Envision troubleshooting guide WFS383.

Noise reduction:Systems achieve quiet operation through innovative design and premium components. Models come with quiet-running, two-speed scroll compressors mounted on double-isolation plates made of acoustic metal. The compressor includes a compressor blanket to provide superior noise reduction. In addition, the cabinets are fully insulated. Units are located indoors, so homeowners can get rid of their outdoor condensing units.

IAQ equipment supported:Comes standard with a MERV 11 filter and can be upgraded with a complete line of WaterFurnace IAQ products. Upgrade filters include HEPA filters; heat recovery ventilators; electronic air cleaners; humidifiers; drain pan fresheners; and 4-inch MERV 11 filters with an optional carbon insert.

Thermostat compatibility:Compatible with all three-heat/two-cool thermostats.

Replacement compatibility:Shares many replacement parts among the models within its product series.

Additional:The most efficient split heating-cooling system rated by the Air Conditioning, Heating & Refrigeration Institute in category 13256-1 (GLHP).

Warranties:Ten-year parts and labor allowance.

Special installation requirements:Requires the installation of geothermal ground loop system. The type of loop used is based on available land space and installation costs for specific areas.

Contact:WaterFurnace, Fort Wayne, Ind.; attn: Andy Fracica, 260-479-3210; 866-272-4387 (fax); andy.fracica@waterfurnace.com; www.waterfurnace.com.

eProduct 229

Weil-McLain

Model:13 SEER split system

Footprint (inches):36 by 31

Serviceability:Single-screw access panel to wiring compartment, unit designed with a large removable top grill that provides access to all serviceable components.

Technical support:Available Monday-Friday 7 a.m.-4:30 p.m. Central at 219-879-6561.

Technical materials:Visit www.weil-mclain.com for product manual, wiring diagram, service-troubleshooting information.

Noise reduction:Sound-absorbing injection-molded top cap, a quiet high-efficiency fan motor.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Quantity of shared replacement parts.

Additional:Features a durable microchannel condenser coil. When compared to traditional copper tube-aluminum fin coils, microchannel is less susceptible to corrosion, has fewer brazed connections, is less prone to damage, and uses approximately 40 percent less refrigerant. The microchannel design has more surface area, which greatly reduces the height of units, ranging from 17- to 29-inches tall.

Warranties:Five-year limited compressor, five-year limited parts.

Special installation requirements:None.

Contact:Weil-McLain, Michigan City, Ind.; attn: Mike Boyd, 219-879-6561; 219-877-0556 (fax); mboyd@weil-mclain.com; www.weil-mclain.com.

eProduct 230

Model:14 SEER split system

Footprint (inches):36 by 31

Serviceability:Single-screw access panel to wiring compartment, unit designed with a large removable top grille that provides easier access to all serviceable components.

Technical support:Available Monday-Friday 7 a.m.-4:30 p.m. Central at 219-879-6561.

Technical materials:Visit www.weil-mclain.com for product manual, wiring diagram, service-troubleshooting information.

Noise reduction:Sound-absorbing injection-molded top cap, a quiet high-efficiency fan motor.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Quantity of shared replacement parts.

Additional:Features a durable microchannel condenser coil. When compared to traditional copper tube-aluminum fin coils, microchannel is less susceptible to corrosion, has fewer brazed connections, less prone to damage, and uses approximately 40 percent less refrigerant. The microchannel design has more surface area, which greatly reduces the height of units, ranging from 21- to 37-inches tall.

Warranties:Ten-year limited compressor, five-year limited parts.

Special installation requirements:TXV required.

Contact:Weil-McLain, Michigan City, Ind.; attn: Mike Boyd, 219-879-6561; 219-877-0556 (fax); mboyd@weil-mclain.com; www.weil-mclain.com.

eProduct 231

Westinghouse

Model:FT4BF heat pump

Footprint (inches):31 by 31

Serviceability:ComfortAlert II Module detects system and electrical problem conditions. Easier compressor and control access, five-minute anti-short-cycle protection, easy-access full-service refrigerant valves, removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Dealers can log onto the Nordyne Website to gain access to technical literature, installation instructions, and wiring diagrams.

Noise reduction:One-piece top orifice and variable-speed outdoor motor provide quiet operation, and a swept-wing fan blade helps reduce unwanted noise.

IAQ equipment:The variable-speed air handler provides enhanced dehumidification as well as constant airflow for improved IAQ.

Thermostat compatibility:Two-stage thermostat is required. The Westinghouse Comfort Alert (CA) thermostat provides the homeowner with a “check system” warning should the outdoor unit require service. The contractor can also access fault codes from the CA thermostat.

Replacement compatibility:Shares replacement parts with other models in the line.

Additional:This product includes high and low pressure switches, high-capacity bi-flow filter-drier, and durable full metal jacket to protect the unit from debris.

Warranties:Ten-year limited all parts, 10-year quality pledge replaces the outdoor unit if the compressor fails in the first year when installed with a matched indoor air handler or coil; 10-year compressor.

Special installation requirements:None

Contact:Westinghouse, O’Fallon, Mo.; attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.westinghouse.net.

eProduct 232

Model:R6GD single packaged gas-electric unit

Footprint (inches):56 by 48

Serviceability:High-low service ports offer quick access without disrupting operation.

Technical support:Available at 422-4328 (4AC-HEAT) 8 a.m.-4:30 p.m. Central.

Technical materials:Installation instructions, wiring diagram, technical sales literature, replacement parts list.

Noise reduction:Manufacturer did not specify.

IAQ equipment:Manufacturer did not specify.

Thermostat compatibility:Compatible with most thermostats.

Replacement compatibility:Shares parts.

Additional:Heavy-gauge, full-perimeter base rails, convertible air delivery, TXV factory installed.

Warranties:Ten-year limited parts, 10-year quality pledge, 10-year compressor.

Special installation requirements:None.

Contact:Westinghouse, O’Fallon, Mo.; attn: Jeff Gamache, 636-561-7548; 888-215-2991 (fax); gamachej@nordyne.com; www.westinghousehvac.com.

eProduct 233

Whirlpool Corp.

Model:Gold W4GC8 split system

Footprint (inches):27 by 25 to 31 by 30

Serviceability:Allows easier service with external gauge ports. The electrical cabinet is located on the corner of the unit for easier access; each of the louvered panels remove with two screws for condenser coil cleaning.

Technical support:Available at 866-944-7575 8 a.m.-5 p.m., Monday-Friday.

Technical materials:Product specs, installation and operating manuals, Web access to part numbers, service bulletins, and warranty information.

Noise reduction:Compressor sound blanket.

IAQ equipment:Supports many of the IAQ products in the industry. Additionally, the equipment supports the Whirlpool® Aircare™ whole-home dehumidifier and associated models.

Thermostat compatibility:Whirlpool thermostat is available in programmable models. The unit is also compatible with most industry-standard thermostats.

Replacement compatibility:Uses industry-standard parts.

Additional:Manufactured with the quality and safety standards of Whirlpool Corp. All products are thoroughly tested at the factory to provide homeowners with the assurance of consistent quality and performance.

Warranties:Limited five- to 10-year parts and 10-year compressor. When an authorized Whirlpool Gold® Dealer installs a factory-approved, matched Whirlpool Gold® Heating and Air Conditioning system, Whirlpool includes its HomeWise® consumer protection plan. Under this plan, if the unit should fail in the first five years due to a compressor or furnace heat exchange failure, Whirlpool will replace the unit with a comparable model.

Special installation requirements:All Whirlpool HVAC products should be installed in accordance with installation instructions and applicable local codes.

Contact:Whirlpool Corp.; attn: Jimena Ziegert, 866-944-7575; jimena_c_ziegert@whirlpool.com; www.whirlpoolcomfort.com.

eProduct 234

York - Johnson Controls Inc.

Model:Affinity™ CZH split system

Footprint (inches):40 by 42 by 34

Serviceability:A full-end, full-service access panel with a handle provides easier access to internal components, and a slide-down control compartment and angled service valves reduce installation time and costs.

Technical support:First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide for York 18 SEER Affinity air conditioners includes wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions; available at www.upgnet.com or by request.

Noise reduction:The York QuietDrive™ system uses a swept-wing fan design adapted from aeronautic and defense engineering, isolated compressor compartment, composite base pan and two-stage cooling design to provide up to four times quieter operation. Air flows smoothly off the fan blade, reducing turbulence and sound.

IAQ equipment:Compatible with a complete line of York residential IAQ products, including ventilation systems, UV air treatment, electronic and media air cleaners, and whole-house humidifiers.

Thermostat compatibility:A wide selection of compatible thermostats is available to provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:York’s innovative scroll compressor technology, two-stage design, and QuietDrive system help ensure reduced noise, even comfort levels, and improved energy efficiency. Units come standard in champagne, with a choice of six other colors. They bear the Good Housekeeping Seal of approval and are Energy Star® qualified.

Warranties:Five-year limited parts and 10-year limited compressor. An optional premium system warranty offers limited lifetime compressor and 10-year parts when a York 18 SEER Affinity air conditioner is matched with an approved York Affinity furnace or a Unitary Products’ air handler and coil.

Special installation requirements:None.

Contact:York, Norman, Okla.; attn: Mickey Smith, 405-419-6541; 405-419-6545 (fax); mickey.s.smith@jci.com; www.yorkupg.com.

eProduct 235

Model:LX Series YCJD split system

Footprint (inches):From 28 by 24 by 24 to 30 by 29 by 29 (13 SEER models)

Serviceability:The compact footprint makes it easier to install where space is limited. Fully exposed refrigerant connections and a single panel covering the electrical controls make for easier servicing. The microchannel aluminum coil is 30 percent lighter than conventional coils, enhancing serviceability.

Technical support:First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-6 p.m. Eastern.

Technical materials:A full technical guide for York® LX Series air conditioners, including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions, is available at www.upgnet.com or by request.

Noise reduction:The upward airflow carries the normal operating noise away from the living area. The rigid top panel effectively isolates motor sound, and the isolator-mounted compressor and rippled fins of the condenser coil muffle normal fan motor and compressor operating sounds. The 14.5 SEER model incorporates a compressor blanket and swept-wing fan blade for quieter operation.

IAQ equipment:Compatible with a complete line of York residential IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners, and whole-house humidifiers.

Thermostat compatibility:A wide selection of compatible thermostats help provide optimum performance and features for any installation.

Replacement compatibility:Shares replacement parts with other models.

Additional:The unit’s compact footprint is the smallest in the industry. The unit features a microchannel coil with enhanced heat transfer characteristics, enabling it to achieve desired performance levels with less coil surface area than competitive units. It also uses 50 percent less refrigerant than competitors’ condensers.

Warranties:Five-year limited parts, five-year limited compressor (13 SEER); five-year limited parts, 10-year limited compressor (14.5 SEER)

Special installation requirements:None.

Contact:York, Norman, Okla.; attn: Mickey Smith, 405-419-6541; 405-419-6545 (fax); mickey.s.smith@jci.com; www.yorkupg.com.

eProduct 236

Publication date:04/14/2008