This photo feature provides in-depth information on the features of each individual product; it also includes technical support information from the manufacturer.
The product grid (see the PDF link at the bottom of this article) includes technical facts such as fuel type, heater type, single or multi stage, and unit size.
AAF-Herman Nelson
Model:Self-contained unit ventilator AZQ, AEQ, ARQ, ERQ, GRQFootprint (inches):Up to 110 (length) by up to 30 (width) by up to 29 (height)
Serviceability features:Two end panels provide access to piping, temperature control components, and the fan switch. Unlike units with full-length front panels, these can be removed without disturbing normal operation of the unit. Hinged top-access doors provide access into the end compartments to facilitate servicing of the motor, electrical, and refrigeration components. Center front panel provides access to the filter and fan shaft bearing.
Technical support:Through local representative and website.
Technical support materials:Pre- and post-sale marketing materials are found on website. Product data catalogs, installation/operation manuals, certified drawings, and much more available at www.mcquay.com/McQuay/ProductInformation.
Noise-reduction features:The GentleFlo™ air-moving system minimizes operating sound levels, even as demands for more fresh air require units to operate longer and work harder. Large fan wheels are wide and rotate at a low speed to reduce fan sound levels. They are impact resistant and balanced to provide consistent performance. Offset, aerodynamic fan wheel blades move air efficiently, and precision tolerances help reduce flow and pressure turbulence, resulting in lower sound levels.
IAQ equipment supported:Unit ventilators deliver fresh air to meet ventilation requirements, and added cooling capacity to maintain consistent comfort for students and teachers. Economizer operation, demand control ventilation (DCV), and part-load variable air options make it possible to match classroom comfort requirements more closely, thus reducing operating costs.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Two-stage compressors stage from full- to part-load, or part- to full-load compression to meet the space temperature setpoint. The unit runs on lower fan speeds most of the time, improving comfort through better humidity control and quieter operation, while minimizing issues with oversizing. Water-source heat pump unit ventilators offer part-load efficiency for ground-loop applications in excess of 23 EER.
Warranty information:Standard factory warranty is 12 months from the date of installation or 18 months from shipment. Extended warranty options are available.
Special installation requirements:All units ship with detailed installation instructions.
Contact:McQuay International; 315-253-2771; www.mcquay.com.
eProduct 160
American Standard Heating and Air Conditioning
Model:T/YHC092-120E package unitFootprint (inches):99 (length) by 63 (width) by 51 (height)
Serviceability features:These compact rooftop units fit into the same roof curb as current models, reducing installation time and costs. Preconfigured units come with factory-installed options to eliminate expensive and time-consuming accessory field installations. Precedent™ units offer access to filters, compressors, and controls through single-side access doors.
Technical support:Please contact local distributor.
Technical support materials:Wiring diagrams available (RT-SVD03*-EN Micro guide, Y_C, T_CSVB002-EN wiring manuals). Troubleshooting guides available through the local office.
Noise-reduction features:A standard feature on the dual-compressor, high-efficiency Precedent units, the plenum fan offers quiet, unobtrusive operation and reduced maintenance costs. Backward-inclined blade design performs at a whisper, allowing for a more efficient indoor sound mitigation plan. There are fewer blades to clean and maintain.
IAQ equipment supported:MERV-13 high-efficiency filtration option reduces the amount of particles in the air and provides better air quality. CO2 controls available to bring in more outside air when occupancy levels are high. Hot gas reheat available for humidity control. Cleanable, dual-sloped drain pans help reduce microbial growth.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:These high-efficiency rooftop units are 15 percent more efficient than typical packaged equipment. Energy efficiency can be increased by adding the manufacturer’s controls, in addition to providing proper installation and maintenance. Units offer three stages of cooling on high-efficiency, dual-compressor units for more precise temperature control. This helps save energy usage all year.
Warranty information:Five-year compressor; five-year heat exchanger; parts only.
Special installation requirements:No belts; high-efficiency units feature direct-drive fan motors, reducing maintenance requirements and costs.
Contact:American Standard Heating and Air Conditioning; 903-581-3200; www.americanstandardair.com.
eProduct 161
Arcoaire
Model:RGS060 package gas/electric rooftopFootprint (inches):74 (length) by 44 (width) by 33 (height)
Serviceability features:Master terminal board puts all connections and troubleshooting points in one place. Individual-group control (IGC) solid-state control for on-board diagnostics with LED error code designation, burner control logic, and indoor fan motor delay. Units feature through-the-base utility connections capability, a no-strip screw system, and access panels with easy-grip handles. Optional factory-installed, integral nonfused disconnect and field-powered, 115-V convenience outlet are available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at dealer website (www.goarcoaire.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control with either outdoor air (OA) drybulb or enthalpy controls accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide outdoor air for demand control ventilation (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Factory-installed options include three heat options (high, medium, and low), low NOx (meets California air quality requirements), stainless steel heat exchangers, supply air smoke detector, coil coatings, and medium- and high-static indoor fan option. Other options, such as liquid propane/high-altitude kits and flue exhaust extensions, are available.
Warranty information:Fifteen-year limited stainless steel heat exchanger, 10-year limited aluminized heat exchanger, five-year limited compressor, and one-year limited on all other parts.
Special installation requirements:None.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goarcoaire.com.
eProduct 162
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one place, the master terminal board. Large, laminated control wiring and power wiring drawings are affixed to the unit to make troubleshooting easier. Optional factory-installed, integral nonfused disconnect and field-powered 115-V convenience outlet are available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Medium- or high-static indoor fan option. Other factory-installed options include economizer option and coastal outdoor coil-coating option. Four-way reversing valve changes the flow of refrigerant to quickly change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor; one-year limited on all other parts.
Special installation requirements:Reliable fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goarcoaire.com.
eProduct 163
Bard
Model:WF wall-mount gas furnaceFootprint (inches):24 (length) by 38 (width) by 45 (height)
Serviceability features:All service and maintenance is performed outside the building, consuming no interior floor space. Additional service features include ventilation package options (factory or field installed), multispeed blower motor, 18-gauge stainless steel tubular heat exchanger, hinged service door allowing access to air filters, advanced in-shot burner design, versatility to satisfy both ducted and nonducted applications, integrated DSI control.
Technical support:In-house and field training classes available. Service provided through distribution network.
Technical support materials:Service parts guides, wiring diagrams, installation manuals, website.
Noise-reduction features:Multispeed blower motors and advanced-design in-shot burners.
IAQ equipment supported:Options include energy recovery ventilator and commercial room ventilator.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The WF is the only wall-mount gas furnace on the market. Its space-saving design is appropriate for new construction, modular offices, school facilities, portable structures, retail stores, garages, and other commercial applications.
Warranty information:Five-year parts, 10-year heat exchanger.
Special installation requirements:Low-NOx models available. High-altitude kits, Canadian-approved models.
Contact:Bard Manufacturing Co.; 419-636-1194; www.bardhvac.com.
eProduct 164
Benchmark
Model:BMK3.0LN boilerFootprint (inches):64 (length) by 28 (width) by 79 (height)
Serviceability features:Manufacturer did not specify.
Technical support:Available 8 a.m.-5 p.m. Eastern, Monday-Friday at 800-526-0288.
Technical support materials:Installation and operation and maintenance manuals include a troubleshooting guide, product and component diagrams, installation and piping diagrams, and controls and electrical wiring manuals and diagrams.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The 15:1 turndown maximizes operating efficiency and seasonal fuel savings. In addition, its size means it fits easily through a standard-size doorway and occupies a very small footprint. It also fits most challenging projects.
Warranty information:The pressure vessel/heat exchanger carries a 10-year prorated, limited warranty from shipment against any failure due to condensate corrosion, thermal stress, mechanical defects, or workmanship. Operation using contaminated air voids the warranty. The pressure vessel/heat exchanger shall not be warranted from failure due to scaling, liming, corrosion, or erosion due to water or installation conditions. AERCO-labeled control panels are conditionally warranted against failure for two year from shipment. All other components, with the exception of the igniter and flame detector, are conditionally guaranteed against any failure for 18 months from shipment.
Special installation requirements:Ensure that access to ac input power corresponds to the ordered power configuration (208-vac, three phase, 60 Hz @20 A; 460-vac, three phase, 60 Hz @15 A). Access to natural gas line at a static pressure between 5.7-in. wc (min) and 2 psi (max) for standard (FM) option. Access to natural gas line at a static pressure between 6.5-in wc (min) and 2 psi (max) for IRI option. Access to propane at a static pressure between 3.5-in wc (min) and 2 psi (max) for both standard (FM) and IRI options.
Contact:AERCO; 800-526-0288; www.aerco.com.
eProduct 165
Bryan Boilers
Model:Triple-Flex™, TF150 to TF300 ultra-high-efficiency condensing boilerFootprint (inches):129 to 150 (length) by 35 (width) by 75 (height)
Serviceability features:Accessible panels for inspection-service of the heat exchanger. Triple-Flex continues the standard of easy-to-replace flexible water tubes. Reverse construction option allows for common service aisle with multiple boiler installations.
Technical support:Support is available from more than 60 representatives in North America backed by manufacturer factory support.
Technical support materials:Installation, operation and maintenance manual, wiring diagrams, equipment lists supplied with boiler.
Noise-reduction features:Variable-speed blower for combustion air is surrounded by boiler jacket for reduced sound level.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Does not share replacement parts with other models.
Additional features:The boiler is designed to deliver ultra-high efficiencies regardless of heating system loop temperatures. Energy savings, coupled with the manufacturer’s known long service life, offers the owner the means to get maximum returns on minimal spending.
Warranty information:Ten-/5-year on pressure vessel, tubes (heat exchanger). Lifetime warranty against damage due to thermal shock.
Special installation requirements:Manufacturer did not specify.
Contact:Bryan Steam LLC; 765-473-6651; www.bryanboilers.com.
eProduct 166
Bryant Heating and Cooling
Model:Legacy 580J/558J/548J package unitFootprint (inches):74 (length) by 47 (width) by 33 (height)
Serviceability features:Designed with the dealer in mind - large control box for access; handled access doors; centralized terminal board for ease of connections; many field-installed accessories; through-the-base utility connection capability. Individual-group control (IGC) solid-state control board with diagnostics and LED error codes.
Technical support:Supported by local and trained distributors. Training is available at field schools.
Technical support materials:Product data, wiring diagrams, service manuals; installation instructions, and critical parts list. All posted online and available through distributor.
Noise-reduction features:Scroll compressors, insulated cabinet, full-perimeter base rail, and quiet-operation belt-drive evaporator fans.
IAQ equipment supported:Two-inch return air filters with multi-sensor economizers. CO2 sensing available to support demand control ventilation logic and control.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units have the capability for vertical and horizontal airflow duct capabilities. Many factory-installed options and field-installed accessories from air management to smoke detectors.
Warranty information:Standard commercial warranty available with extended programs.
Special installation requirements:Units are factory tested and can be roof or slab mounted.
Contact:Bryant Heating and Cooling; 315-432-6878; www.bryant.com.
eProduct 167
Burnham Commercial
Model:C-Series package boilerFootprint (inches):Manufacturer did not specify.
Serviceability features:Extra-heavy tube sheets ensure continued airtight conditions necessary for efficient combustion, and the front flue door allows easy access to boiler tubes for routine cleaning and inspection. Unlike some competitors, Burnham Commercial uses nonproprietary parts wherever possible, reducing the cost of replacement parts when needed.
Technical support:The manufacturer has a network of representatives all over the United States to offer support, answer questions, and provide troubleshooting advice. Additionally, it says it has the experience and expertise to assist with more complicated questions in-house.
Technical support materials:The website serves an information database for engineers, manufacturers’ reps, and customers. Submittal drawings (.dwg and .pdf formats), articles, ratings, burner data sheets, and additional information is available.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Because the C-Series is compact, most sizes (up to 100 hp) can fit through a standard 36- by 80-inch doorway. The series is a modified scotch design, with up to 89 percent efficiency. New in 2010, the line has been expanded to include 125-, 150-, 175-, and 200-hp models.
Warranty information:Standard manufacturer defect warranty applies (12 months from date of installation or 18 months from date of shipment, whichever is shorter). Limitations apply, call the company or a local representative for more information or to receive a copy of the warranty.
Special installation requirements:Manufacturer did not specify.
Contact:Burnham Commercial; 888-791-3790; www.burnhamcommercial.com.
eProduct 168
Carrier
Model:WeatherMaster Series 48/50HC/Q package unitFootprint (inches):74 (length) by 47 (width) by 33 (height)
Serviceability features:Designed with direct contractor feedback; comes with a large, organized control box; standard components; optional hinged access doors; a control center that centralizes wiring and service points into one location; handled access doors; no-strip screw technology; and a removable service plug that simplifies taking refrigerant pressure readings.
Technical support:Contact local expert or the manufacturer.
Technical support materials:Selection and financial tools; product data; wiring diagrams; service controls and commissioning manuals; installation instructions; and critical parts list are available locally or on website.
Noise-reduction features:Fully insulated cabinet with isolated compressors and ridged, full-base-rail design.
IAQ equipment supported:Economizers with multiple sensing capabilities, high-intensity UVC lights, and 2- and 4-inch filters on larger models, plus capability to integrate CO2 sensors for demand control ventilation logic and operation.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Models are designed to allow direct replacement on past Carrier roof curbs dating back to the late 1980s. Utility connects are the same, allowing quicker changeouts. In keeping the same cabinet size, efficiencies increased from 9.3 to 15.8 SEER. Units also operate in up to 125°F ambient conditions standard. Units available with an optional multiprotocol communication controller that connects to third-party building automation systems via BACnet, Modbus, Johnson N2, and LonWorks.
Warranty information:Standard Carrier Commercial warranty available with many extended programs.
Special installation requirements:None; refrigerant accumulators are standard on all heat pump models.
Contact:Carrier Corp.; 315-432-6878; www.carrier.com.
eProduct 169
Century
Model:HBH Large Commercial Series water-source heat pumpFootprint (inches):85 (length) by 36 (width) by 22 (height)
Serviceability features:Two panels are removed for access to components. Eight safeties protect the unit by sensing such conditions as high pressure, low pressure, air coil temperature too high or too low, etc., helping service technicians diagnose problems. Performance sentinel monitoring system signals when a unit isn’t operating at peak efficiency, so service can be scheduled before lockout occurs.
Technical support:Available 8 a.m.-5 p.m. Eastern, weekdays, at 517-787-2100.
Technical support materials:Installation, operation and maintenance manual (including troubleshooting guide), as well as replacement parts list, available on website or by e-mail.
Noise-reduction features:Double spring-and-grommet isolation mounting system (for the dual compressors) reduces vibration; flexible-torsion motor mounting further minimizes vibration and related sound. Belt-driven blower with high-efficiency motor also minimizes vibration. Interior surfaces are lined with acoustic-type insulation and insulated divider between compressor and air-handling compartments.
IAQ equipment supported:Unit is built with extra-large 1-inch fiberglass filter with accessible filter brackets. Brackets available to convert to 2-inch filter.
Thermostat compatibility:Heat pump-type thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Series is compatible with many existing water-source units, so it is a potential replacement for water-loop systems. Extended refrigerant circuit makes it applicable to ground-loop and ground-water applications. Two refrigerant circuits and dual compressors provide maximum temperature control. Microprocessor controls include performance sentinel system that signals when unit is running inefficiently or a potential problem exists, so service can be scheduled. Drain pan is coated to prevent corrosion.
Warranty information:Limited five-year warranty on compressor, one-year parts (some limitations apply; see website for warranty details).
Special installation requirements:Discharge is field convertible using existing parts. Water can be connected to either side; electric power can enter from front or sides. Available in 208/230-V-3-60, 460-V-3-60, and 575-V-3-60 (not all models in all voltages).
Contact:Century; 517-787-2100; www.century-hvac.com.
eProduct 170
Footprint (inches):25 to 53 (length) by 31 (width) by 33 to 37 (height)
Serviceability features:All components can be accessed through a front panel; side panel can also be opened if necessary. Microprocessor controls include on-board diagnostics and safety functions such as anti-short cycle, under- and over-voltage, etc.; includes alarm contact for remote monitoring of fault condition. Compressor “run” and “fault” lights mounted on front of cabinet.
Technical support:Available 8 a.m.-5 p.m. Eastern, weekdays, at 517-787-2100.
Technical support materials:Installation, operation and maintenance manual, and design engineering guide (including troubleshooting guide and wiring diagrams) are available on website or by e-mail.
Noise-reduction features:Cabinet interior is lined with ½-inch dual-density, acoustic-type insulation for sound attenuation. Double-isolation compressor mounting system minimizes vibration and related sound.
IAQ equipment supported:Twenty mesh strainers/filters can be cleaned; replaced when necessary.
Thermostat compatibility:Heat pump capable thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Appropriate for a wide range of commercial-industrial applications such as radiant floors, snow-ice melting, industrial processes, etc., wherever cost-effective heated-chilled water is needed. Top water connections are staggered to simplify manifolding multiple units. Performance monitoring system signals when the system is not running at peak efficiency, so maintenance can be scheduled. Small footprint saves space in mechanical rooms.
Warranty information:Limited five-year compressor, one-year parts (some limitations apply; see printed warranty on website for details).
Special installation requirements:Can be installed side by side for large-capacity applications. Extended-range refrigerant circuit means units are capable of ground water and ground-loop installations, as well as boiler-cooling tower. Select from five voltage options, although all models are not available in all voltages.
Contact:Century; 517-787-2100; www.century-hvac.com.
eProduct 171
ClearFire
Model:Model CFC boilerFootprint (inches):Manufacturer did not specify.
Serviceability features:A high-efficiency, full condensing boiler, this single-pass, down-fired, stainless steel hot water unit is available in six sizes ranging from 500,000- to 2,500,000-Btuh input. The linkageless burner provides full range turndown with reduced NOx emissions of less than 20 ppm. Operating efficiency is 99 percent in full condensing mode. Noise emission <70 dBa and CSA certified.
Technical support:Contact local authorized representative for service at website.
Technical support materials:Manufacturer did not specify.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The patented AluFer tubes maximize heat transfer and minimize footprint.
Warranty information:Manufacturer did not specify.
Special installation requirements:Manufacturer did not specify.
Contact:Cleaver-Brooks Inc.; 800-566-8440; cleaverbrooks.com.
eProduct 172
ClimateMaster
Model:Tranquility Vertical Stack, TRWFootprint (inches):17 to 24 (length) by 17 to 24 (width) by 88 (height)
Serviceability features:Cabinet is installed behind furred-in wall. The chassis (refrigeration section) is removable through the opening in the cabinet. All electrical components and the blower motor are accessible through the cabinet. The unit is covered with an easily removable air panel.
Technical support:Available at 405-745-6000.
Technical support materials:All wiring diagrams, installation instructions, and submittals are available online.
Noise-reduction features:Hydronic heat does not have a compressor operating; motorized water valve allows water to flow to hydronic coil.
IAQ equipment supported:MERV 12 filters are available.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The TRW has hydronic heating.
Warranty information:A standard limited express warranty is available. The coverage is 18 months from the time of shipment or 12 months from startup, whichever comes first. Optional warranties are available. These include four-year control board, four-year compressor, and four-year refrigerant circuit.
Special installation requirements:Requires water-loop controller (70° to 130°F).
Contact:ClimateMaster Inc.; 405-745-6000; www.climatemaster.com.
eProduct 173
Comfort-Aire
Model:EKTH-G Series package terminal heat pumpFootprint (inches):42 (length) by 21 (width) by 16 (height)
Serviceability features:On-board computer’s real-time diagnostics simplify service. LED flashes error code for assisting service technicians in identifying and correcting problems; in many cases, unit itself will automatically clear or correct the fault condition and continue operation without interruption. Bimolded condenser shroud lifts off to make it easier to inspect, clean, and service components.
Technical support:Available 8 a.m.-5 p.m. Eastern, weekdays, at 517-787-2100.
Technical support materials:Installation, operation and maintenance manual, service manual, and replacement parts list available on website or by e-mail.
Noise-reduction features:Dynamically balanced, tangential blower wheel distributes air evenly with minimal operational sound. Outdoor fan has a polymer, multiblade axial airflow design that moves air quietly and efficiently. The indoor fan runs a minimum of 10 seconds before the compressor starts, to help reduce any compressor starting noise. Quality construction and components reduce sound transmission for a quieter environment.
IAQ equipment supported:Two-piece lifetime filters can be accessed for cleaning and replaced without removing the shroud. Additionally, a molded plastic filter on the outdoor ventilation opening stops dirt and other contaminants from entering the room side of the unit.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Automatically switches to electric heat at about 35°F outside ambient; 2.5-, 3.5-, or 5-kW electric heat determined by power cord selection. Allows for front desk setback and in-room temperature limiting. Can be configured to a specific application through use of dipswitches and digital keypad; selections include setpoint limiting, front desk control, wall thermostat control, and more. Unit protection includes random auto restart, anti-short cycle, in-room freeze protection, and defrost protection.
Warranty information:One-year limited parts, five-year limited compressor (some limitations apply; see printed warranty on website for complete details).
Special installation requirements:Select appropriate power cord when ordering to get the desired electric heat. Follow standard installation practices for packaged terminal units; units can be installed flush to the floor if desired.
Contact:Comfort-Aire; 517-787-2100; www.comfort-aire.com.
eProduct 174
Footprint (inches):34-54 (length) by 19-24 (width) by 11-21 (height)
Serviceability features:Large panels can be removed for access to components. Removable blower inlet rinks allow access to fan and motor. Performance monitoring system signals potential problems before lockouts can occur, simplifying diagnostics. Safety features protect the unit including such things as freeze protection for the heat exchanger and air coil, condensate overflow prevention, enabling emergency heat if fault lock-out occurs, etc.
Technical support:Available 8 a.m.-5 p.m. Eastern, weekdays, at 517-787-2100.
Technical support materials:Installation, operation and maintenance manual with troubleshooting guide, and guide with wiring diagrams, are available on the website or by e-mail.
Noise-reduction features:Double spring-and-grommet isolation mounting system for the compressor, and flexible-torsion motor mount, reduce vibration and related sound. Cabinet includes sound-absorbing insulation and compressor and air handler compartments that are separated by an insulated divider. Ultra Quiet package available as option.
IAQ equipment supported:Accessed high-efficiency electrostatic filters are washable; should be cleaned monthly with a high-pressure wash.
Thermostat compatibility:Heat pump capable thermometer.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Units can be operated independently year-round in heating or cooling mode, providing effective zone control. Ideal for boiler-cooling tower installations; extended-range capability allows ground-loop application. Scroll compressors on 2- to 5-ton models; rotary on ½- to 1½-ton models. Air discharge is field convertible. Galvanized steel cabinet has epoxy-coated-steel drain pan to protect against corrosion. Includes factory-installed hanger brackets.
Warranty information:Limited five-year compressor, one-year parts (some limitations apply; see printed warranty details on website).
Special installation requirements:Appropriate for multistory structures such as office buildings, as well as single-story facilities such as nursing homes and schools, using an interconnected water loop. Compact size makes unit appropriate for replacements. Available in single- and three-phase voltages, although all models are not available in all voltages.
Contact:Comfort-Aire; 517-787-2100; www.comfort-aire.com.
eProduct 175
Comfortmaker
Model:RGS101 package gas/electric rooftopFootprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels have easy-grip handles and no-strip screws. Individual-group control (IGC) solid-state control for on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches, and freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), and medium- and high-static indoor fan option. Other options, such as liquid propane and high-altitude kits, are available.
Warranty information:Fifteen-year limited stainless steel heat exchanger; 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.gocomfortmaker.com.
eProduct 176
Footprint (inches):74 (length) by 47 (width) by 41 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one place, the master terminal board. Large laminated control wiring and power wiring drawings are affixed to unit to facilitate troubleshooting. Factory-installed integral, nonfused disconnect, and field-powered, 115-V convenience outlet, are available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Medium- or high-static indoor fan option. Other factory-installed options include economizer option and coastal outdoor coil coating option. Convertible airflow design; four-way reversing valve rapidly changes the flow of refrigerant to quickly change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:Reliable fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.gocomfortmaker.com.
eProduct 177
Daikin
Model:VRV-WIII - RWEYQ water-cooled heat pump or heat recovery condensing unitFootprint (inches):22 (length) by 31 (width) by 40 (height)
Serviceability features:Advanced, self-diagnostic auto-check function detects a malfunction and immediately displays the type and location so it can be resolved quickly and effectively.
Technical support:Available at 972-245-1510, Monday-Friday, 7 a.m.-5 p.m. Central.
Technical support materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide spec sheets.
Noise-reduction features:The FXZQ indoor unit has a sound pressure level as low as 25 dBa; the RWEYQ condensing unit is as low as 50 dBa.
IAQ equipment supported:Some indoor fan coil units feature an air purification filter with photocatalytic deodorizing function; MERV 8 and 15 filter options.
Thermostat compatibility:Requires a special thermostat; one LCD remote controller for up to 16 zones provides a host of operational functions, including seven-day programmability. Connects to I-Touch intelligent controller and I-Manager. Can be integrated via Daikin BACnet and LONworks Gateways.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The improved VRV-WIII gives engineers a solution for geothermal applications. Six system capacities range from 6 to 21 tons and provide a modular solution for large commercial applications. The new model improves switching from cooling to heating without system interruption and improves full-load energy efficiency performance. The standard entering water temperature (from 59° to 113°F in both heating and cooling) is possible for continuous operation.
Warranty information:Six-year compressor, one-year parts, one-year labor.
Special installation requirements:R-410A certification, Daikin factory training, standard installation instructions: service space and piping limitations must be followed as described in the engineering data book.
Contact:Daikin AC (Americas) Inc.; 972-245-1510; www.daikinac.com.
eProduct 178
Day and Night
Model:RGS240-243 package gas/electric rooftopFootprint (inches):142 (length) by 87 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels have easy-grip handles and no-strip screws. Individual-group control (IGC) solid-state control provide on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide outdoor air for demand control ventilation (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dedicated vertical or horizontal airflow duct configuration models are available. Unit features high- and low-pressure switches, freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), stainless steel heat exchangers and medium- and high-static indoor fan option. Other options include liquid propane and high-altitude kits.
Warranty information:Fifteen-year stainless steel heat ex- changer, 10-year limited aluminized heat exchanger, five-year limited compressor, one-year limited all other parts.
Special installation requirements:None
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.godayandnight.com.
eProduct 179
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one place, the master terminal board. Large, laminated control wiring and power wiring drawings are affixed to unit to facilitate troubleshooting. Optional factory-installed integral, nonfused disconnect and field-powered, 115-V convenience outlet are available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Medium- or high-static indoor fan option. Other factory-installed options include economizer option and coastal outdoor coil coating option. Four-way reversing valve changes the flow of refrigerant to quickly change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:Fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.godayandnight.com.
eProduct 180
Esteem
Model:EST 399 boilerFootprint (inches):21 (length) by 25 (width) by 37 (height)
Serviceability features:Manufacturer did not specify.
Technical support:Available at 800-526-0288 from 8 a.m.-5 p.m. Eastern, Monday-Friday.
Technical support materials:Installation and maintenance manual (includes troubleshooting information), control and electrical wiring guide, installation and piping drawings, and technical data sheet.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Does not share replacement parts with other models.
Additional features:The condensing heat exchanger design, built to withstand thermal shock, eliminates the need for boiler pumping equipment, which lowers the size, cost, and operating expense of components throughout the entire heating loop. The forced-draft, modulating burner operates with 3.6:1 turndown to deliver up to 95 percent thermal efficiency.
Warranty information:Manufacturer did not specify.
Special installation requirements:Use only Esteem Concentric Vent/Air System Kit (P/N 39103) and components from AERCO International. Do not mix components or joining methods from other sources.
Contact:AERCO International; 800-526-0288; www.aerco.com.
eProduct 181
FHP Bosch Group
Model:EP Series geothermal heat pumpFootprint (inches):26 (length) by 33 (width) by 66 (height)
Serviceability features:Features solid-state compressor safety circuit, variable-speed ECM fan motor, foil-faced insulation, and coaxial water to refrigerant heat exchanger.
Technical support:Available online or by calling 954-776-5471.
Technical support materials:Wiring diagrams and installation manual.
Noise-reduction features:Sound-attenuating, floating base pan and heavy-gauge steel cabinet. Compressor blanket available as an option on most models.
IAQ equipment supported:EP Series units are provided with 2-inch enclosed filter racks to accommodate high-efficiency filters. Insulation is foil-faced for wipe down cleanability and to avoid fibers in the airstream. Motors on most models are ECM style for efficiency and high static capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The EP Series boasts the best overall efficiency for a product line of its size range and type on the market, the company says. The product leverages the latest compressor and motor technology while building upon the company’s 40-year history.
Warranty information:Standard five-year compressor, 18-month other parts.
Special installation requirements:Standard.
Contact:FHP Bosch Group; 954-776-5471; www.fhp-mfg.com.
eProduct 182
Fulton
Model:Invictus, IVS-095-A, IVS-095-AR, IVS-095-W, IVS-095WLB gas absorption heat pumpFootprint (inches):26 to 49 (length) by 34 (width) by 51 (height)
Serviceability features:From a service perspective, the Invictus is no different than a small condensing boiler. It has a fuel train, fiber mesh burner, blower fan, and a flue stack. The sealed system that contains the water-ammonia refrigerant solution does not require any maintenance.
Technical support:Available 24 hours a day, seven days a week at 315-298-5121.
Technical support materials:Available for download online or from local manufacturer reps.
Noise-reduction features:The sealed system is insulated, and overall operation of the unit is very quiet. The heat pumps are not installed in the ceilings of rooms or zones within a building; they are part of the mechanical room and, thus, are separated from building occupants.
IAQ equipment supported:This is a hydronic product, thus it produces hot or cold water. It is not an air-handling product. Units are incorporated into traditional hydronic heating-cooling applications.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:These gas absorption heat pump systems offer up to 149 percent thermal efficiency. The systems are appropriate for colder, heating-dominant climates and areas where electricity costs are high and cooling loads are low. When combining the units with hydronic boilers and effective control strategies, the result is a heating system that can operate at all ambient or system conditions.
Warranty information:One-year standard parts; sealed system containing the water-ammonia solution has a standard warranty of three years, extendable up to eight years.
Special installation requirements:Installation is easy because the Invictus units are hydronic; they are installed as part of a traditional boiler room. The units are piped primary-secondary (with a dedicated circulator pump), and water piping is connected into a new or existing hydronic boiler or chiller system. There is no need to retrofit ductwork and incorporate air-handling products that will require maintenance in the ceilings of various rooms or zones inside a building.
Contact:Fulton Heating Solutions; 315-298-5121; www.fulton.com.
eProduct 183
Goodman
Model:CPG commercial package unitFootprint (inches):134 (length) by 88 (width) by 50 (height)
Serviceability features:All serviceable components are located on the same side of the unit. Compressor is mounted outside of condensing coil. Bottom utility entry. Contactor with lugs (electrical connections). Built-in filter rack with standard 2-inch filters.
Technical support:Available through distributors and directly from the factory. Technical support telephone number is 888-593-9988.
Technical support materials:All technical support documents are available through the Partner Link website available to all dealers.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:This unit features the award-winning, tubular, dual-diameter heat exchanger. Factory-installed high-capacity, steel-encased filter-drier. High- and low-pressure switches are standard. This unit uses R-410A.
Warranty information:Twenty-year heat exchanger limited, five-year parts limited.
Special installation requirements:This unit has been designed for ease of installation and maintenance.
Contact:Goodman Global Group Inc.; 713-861-2500; www.goodmanmfg.com.
eProduct 184
Haier
Model:HPH48E1BAE package unitFootprint (inches):75 (length) by 33 (width) by 42 (height)
Serviceability features:Electrical components accessible after removing service panel.
Technical support:Available at 866-713-9342.
Technical support materials:Available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Manufacturer did not specify.
Warranty information:Ten-year parts, 10-year compressor.
Special installation requirements:Manufacturer did not specify.
Contact:Haier America; www.haieramerica.com.
eProduct 185
Harsco Industrial, Patterson-Kelley
Model:MACH® C3000 condensing boilerFootprint (inches):58 (length) by 32 (width) by 75 (height)
Serviceability features:Easily serviced, removable front and side panels with quick-release fasteners. Front panel flame port. Plain-English boiler operation history and error messages with the ENVI® control. On wheels it fits through standard 32-inch doorway. NOx <10 ppm standard over all firing rates.
Technical support:Available 8 a.m.-5 p.m. Eastern at 877-728-5351. Local support available through manufacturer reps by factory-trained and -authorized technicians. Visit website to locate nearest representative.
Technical support materials:CAD drawings, wiring diagrams, installation and operation manuals are all available at an online document library. Also available are ratings and dimensions, submittal sheets, water treatment information, boiler selection guide, and warranty. Additional information is available through representatives.
Noise-reduction features:Quiet operation (<50 dB).
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Aluminum heat engine sheds corrosive condensate. It provides efficiency up to 99 percent, with low NOx standard feature across all firing rates. Small footprint and full modulation burner. Cascade up to 24 boilers and integrate with BMS with ENVI control through ModBus and other communication protocols.
Warranty information:Five-10-5 nonprorated warranty (five-year burner, 10-year thermal shock, five-year heat exchanger), one-year parts.
Special installation requirements:MACH is designed for retrofit or new construction. Uses Cat IV venting, is delivered as a fully packaged system (including wheels to move), and fits through standard 32-inch doorway; 18-inch side clearance required for service. Water pH between 6.5 and 8 required.
Contact:Harsco Industrial, Patterson-Kelley; 877-728-5351; www.harscopk.com.
eProduct 186
Heatco
Model:HD Series and HF Series indoor and weatherproof duct heatersFootprint (inches):Manufacturer did not specify.
Serviceability features:All controls are remote for service and troubleshooting. All HDs are wired with quick-connect harnesses. Full onboard diagnostics.
Technical support:Multiple technicians available from 8 a.m.-5 p.m. Eastern.
Technical support materials:All needed current documentation can be found online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:High turndown modulation for precise space temperature control.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:High turndown, all stainless steel construction; many physical configurations for various duct sizes.
Warranty information:Ten-year manufacturer’s parts; original manufacturer’s warranty on controls.
Special installation requirements:Manometer, volt Ohm meter, and flue gas analyzer.
Contact:Heatco Inc.; 770-529-2000; www.heatcousa.com.
eProduct 187
Heil
Model:RGS090 package gas/electric rooftopFootprint (inches):88 (length) by 60 (width) by 41 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels have easy-grip handles and no-strip screws. Individual-group control (IGC) solid-state control for on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches, and freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), medium- and high-static indoor fan option. Other options, such as liquid propane/high-altitude kits, are available.
Warranty information:Fifteen-year limited stainless steel heat exchanger; 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goheil.com.
eProduct 188
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one place, the master terminal board. Large, laminated control and power wiring drawings are affixed to unit to facilitate troubleshooting. Factory-installed, integral nonfused disconnect and field-powered 115-V convenience outlet are optional.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at the dealer website includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Medium- or high-static indoor fan option. Other factory-installed options include economizer and coastal outdoor coil coating. Four-way reversing valve rapidly changes the flow of refrigerant to quickly change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:Fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goheil.com.
eProduct 189
ICP Commercial
Model:RGS300-303 package gas/electric rooftopFootprint (inches):142 (length) by 87 (width) by 57 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels have easy-grip handles and no-strip screws. Individual group control (IGC) solid-state control for on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online at dealer website includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide outdoor air for demand control ventilation (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dedicated vertical or horizontal airflow duct configuration models. Unit features high- and low-pressure switches, freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), stainless steel heat exchangers and medium- and high-static indoor fan option. Other options, such as liquid propane/high-altitude kits, are available.
Warranty information:Fifteen-year stainless steel heat exchanger; 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goicpcommercial.com.
eProduct 190
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one convenient place, the master terminal board. Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy. Optional factory-installed, integral nonfused disconnect and field-powered 115-V convenience outlet are available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Medium or high static indoor fan option. Other factory-installed options include economizer option and coastal outdoor coil coating option. Four-way reversing valve rapidly changes the flow of refrigerant to quickly change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:Fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.goicpcommercial.com.
eProduct 191
INDEECO
Model:WHI hybrid convection wall heaterFootprint (inches):22 (length) by 14 (width)
Serviceability features:Manufacturer did not specify.
Technical support:Manufacturer did not specify.
Technical support materials:Technical information is available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Does not share replacement parts with other models.
Additional features:Offers two levels of heating. The first is convection and the second is forced-air heating. The heater can be switched to override the automatic temperature control to boost heat levels using the built-in timer. Boost power can be set for 5, 10, 15, 20, 25, or 30 minutes.
Warranty information:Manufacturer did not specify.
Special installation requirements:The heater can be recessed in a 2- by 3-inch stud wall, surface mounted, or surface mounted with a color-matched surface mounting box. Rough-in dimensions of all heaters are 18-5/8 by 13-3/8 by 2-3/4 inches deep.
Contact:INDEECO; 314-644-4300; www.indeeco.com.
eProduct 192
Laars
Model:Mighty Therm 2 boilerFootprint (inches):24 (length) by 25 (width) by 29 (height)
Serviceability features:The compact, modular design with tilt-down front access panel allows for ease of installation and long-term maintenance. Features basic cap-and-bulb temperature controls and a low-voltage terminal strip for troubleshooting.
Technical support:Available 8 a.m.-5 p.m. Eastern at 800-900-9276.
Technical support materials:Installation and operation manual, wiring diagrams, standard piping configurations, spec sheets, parts lists, and more information on this product are available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The Mighty Therm 2, 200- to 400-MBtuh Series, offers hot surface ignition, optional two-stage firing, an ASME 160-psi working pressure heat exchanger, flanged water connections, glass-lined headers with external header gaskets, stainless steel burners with removable burner tray, and a built-in fan for Category I or III vent systems.
Warranty information:Ten-year limited.
Special installation requirements:Manufacturer did not specify.
Contact:Laars Heating Systems; 603-335-6300; www.laars.com.
eProduct 193
Footprint (inches):Manufacturer did not specify.
Serviceability features:Zero clearance to combustibles, easy access to the heat exchanger, and top connections (horizontal or vertical direct vent and piping) make it appropriate for tight installations.
Technical support:Available 8 a.m.-5 p.m. Eastern at 800-900-9276.
Technical support materials:Installation and operation manual, wiring diagrams, standard piping configurations, spec sheets, parts lists, and more information on this product are available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:This condensing boiler is fully packaged and offers a 5:1 turndown, 95 percent AFUE, and 10-ppm NOx emissions. It is available in three new sizes (600, 750, and 850 MBH); a recently released volume water heater is available in sizes from 150 to 500 MBtuh.
Warranty information:Ten-year limited.
Special installation requirements:Manufacturer did not specify.
Contact:Laars Heating Systems; 603-335-6300; www.laars.com.
eProduct 194
LG Electronics USA Inc.
Model:Multi V Sync II variable refrigerant flow multizone, split-system heat pumpFootprint (inches):21 (length) by 50 (width) by 63 (height)
Serviceability features:Front panels are removable for control box access. The control box is hinged and swings out for dual compressor access. Also features service tool connection, system settings switches, operating-error codes, and auto addressing.
Technical support:Available at 888-865-3026, Monday to Friday 8 a.m.-5 p.m. Central time.
Technical support materials:Service manual, installation manual, owner’s manual, submittal data, wiring diagrams, parts lists, equipment selection software, product catalogs, and toll-free technical support line for contractors.
Noise-reduction features:Sound attenuation is standard. Low dBa: 24 to 52 (indoor), 58 (outdoor-single frame). Sound pressure levels tested in an anechoic chamber.
IAQ equipment supported:Temperature control through load matching ensures maximum comfort, efficient operation, and dehumidification; system automatically adjusts fan and compressor speeds to ensure proper humidity control. A NEO plasma air-purifying filtration system is standard in all indoor evaporators, which are factory supplied with a washable antibacterial prefilter and a plasma filter.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Field piping savings, energy efficiency, and low decibel levels differentiate the heat pump from others. Individual zone control is another advantage; the model can provide simultaneous heating and cooling for individual heating and cooling control in different zones.
Warranty information:Two-year parts only; additional four- year compressor.
Special installation requirements:Installation manuals are available online or by calling technical support. Technical training classes on installation and service are available for independent contractors at the company’s training academy. The company offers complete training for engineers, architects, installers, and servicers.
Contact:LG Electronics USA Inc.; 312-397-6064; http://lghvac.com.
eProduct 195
Lochinvar
Model:Knight® XL condensing boiler (KBN399 thru KBN800)Footprint (inches):Largest model - 49 (length) by 16 (width) by 42 (height)
Serviceability features:New Smart System™ control features a larger display screen to clearly communicate more information, soft keys for setting adjustments, an encoder knob for fast transitions between screens, and color coding functionality. It offers front, top, and rear service access. The front and top panels are quickly removable by hand.
Technical support:Available at 800-722-2101, 8 a.m.-5 p.m. Central.
Technical support materials:Wiring diagrams, piping diagrams, literature, installation and operation manual, service manual, user manual, pump recommendations, replacement parts list, product summary, warranty information, plan view drawings, typical spec, technical service, etc., are available online.
Noise-reduction features:No special sound-reduction measures are required.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:The Smart System control is a dedicated circuit board which, among many other functions, acts as the thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:A modulating-condensing unit with 94.6 percent thermal efficiency, low-NOx emissions, and a fully modulating burner with 5:1 turndown. Recently enhanced with the re-engineered Smart System control, the user interface now features a larger display screen, color coding functionality, and soft keys for quick and easy use, as well as two selectable cascade options to fine-tune the sequencing of multiple-unit installations.
Warranty information:Ten-year limited covers the heat exchanger for leakage, thermal shock, or other malfunctions caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains in its original place of installation.
Special installation requirements:Installers have easier access to all necessary set-up information. While the built-in-cascading sequencer still allows up to eight boilers to be installed with lead-lag operation, the upgraded control now also offers the option of efficiency-optimized cascade operation to help installers fine-tune the installation of multiple boilers. Boiler is so efficient, it can be installed with PVC vent material.
Contact:Lochinvar; 615-889-8900; www.Lochinvar.com.
eProduct 196
Mammoth
Model:R6GN package rooftopFootprint (inches):102 (length) by 87 (width) by 47 (height)
Serviceability features:Manual-reset high-pressure, low-pressure, and freezestat controls are standard. Quick-release filter access panels require no special servicing tools. Hinged access panels are provided to the controls and compressor from the side of the unit, making servicing easier. Convertible air delivery converts to horizontal airflow with kit. Removable top-grille assembly allows service to the fan motor.
Technical support:Available at 800-422-4328 from 8 a.m.-4:30 p.m. Central time, Monday-Friday. Technical literature available online.
Technical support materials:Technical specs, wiring diagrams, replacement parts lists.
Noise-reduction features:A heavy-duty PSC motor for reliability and quiet operation.
IAQ equipment supported:Fully modulating economizers with enthalpy controls can be factory or field installed; power exhausts are a field-installed option. Two-inch pleated filters are standard.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:These units offer flexibility in the replacement market. The 12.5- and 15-ton units are designed specifically for retrofit applications and are compatible with most standard footprints. They directly replace popular units. All units are supplied with a hail guard as standard. These units are compliant with the 2007 requirements of ASHRAE 90.1, Addendum S.
Warranty information:One-year limited parts, five-year compressor, 10-year limited heat exchanger.
Special installation requirements:Manufacturer did not specify.
Contact:Nordyne; 636-561-7300; www.nordyne.com.
eProduct 197
Footprint (inches):101 (length) by 57 (width) by 55 (height)
Serviceability features:Manual reset high-pressure, low-pressure, and freezestat controls are standard. Quick-release filter access panels require no special servicing tools. Access panels are provided to all controls and the compressor from the side of the unit. Air delivery easily converts to horizontal airflow with kit, with side panel including duct flange and bottom close-off panels. Removable top grille assembly allows service to the fan motor.
Technical support:Available at 800-422-4328 from 8 a.m.-4:30 p.m. Central, Monday-Friday. Technical literature available online.
Technical support materials:Technical specs, wiring diagrams, replacement parts lists, and accessories.
Noise-reduction features:A heavy-duty PSC motor offers reliability and quiet operation.
IAQ equipment supported:Fully modulating economizers with enthalpy controls and power exhausts are available as field-installed options. Two-inch pleated filters are standard.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:These units are designed specifically for retrofit applications and are compatible with most standard footprints, taking less time to install and retrofit, the company said. This unit is compliant with the 2007 requirements of ASHRAE 90.1 Addendum S.
Warranty information:One-year limited parts, five-year compressor, 10-year limited heat exchanger.
Special installation requirements:Manufacturer did not specify.
Contact:Nordyne; 636-561-7300; www.nordyne.com.
eProduct 198
Marvair
Model:GPac, Model AVGA package unitFootprint (inches):43 (length) by 25 (width) by 62 (height)
Serviceability features:Compressor and electrical box are accessible. Filters can be changed from the exterior - no need to go into the building. LEDs identify operating status and fault code. Condenser coil can be easily cleaned.
Technical support:Available at 888-726-2734, Monday to Friday from 8 a.m.-5 p.m. After-hours service available 24/7.
Technical support materials:Manufacturer did not specify.
Noise-reduction features:Scroll compressor; patented tubular heat exchanger with integral formed dimple turbulator eliminates noise caused by expansion and contraction of internal baffles.
IAQ equipment supported:Five ventilation packages offered as options include a manual damper, motorized damper with pressure relief, and the exclusive GreenWheel® ERV. Hot gas reheat is offered as an option for humidity control.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Wall-mounted, package air conditioner with gas heat. Unit can be configured to operate on either natural or LP gas. Optional factory-installed economizer provides free cooling when outdoor conditions are suitable.
Warranty information:Five-year compressor, one-year parts.
Special installation requirements:Package unit is factory charged; no need for refrigerant lines or charging. Unit mounts quickly to an outside wall. Unit can be either ducted or free blow.
Contact:Marvair; 229-273-3636; www.marvair.com.
eProduct 199
McQuay International
Model:Maverick II, MPS package unitFootprint (inches):181 (length) by 98 (width) by 55 (height)
Serviceability features:The equipment has hinged access doors on both sides of the unit for serviceability. DDC has manual operation service function for unit control during servicing and startup.
Technical support:Contact local representative or visit website.
Technical support materials:Pre- and post-sale technical support materials are found on www.mcquay.com/McQuay/ ProductInformation/RooftopSystems/Commercial.
Noise-reduction features:The supply fan design is standard with 1-inch spring isolation for reduced mechanical vibration to the building structure. The supply fan is an airfoil 12-blade design for reduced sound power in the 63- to 250-Hz octave bands.
IAQ equipment supported:Standard unit has two stages of filtration, a 2-inch prefilter with the optional 4-inch final filter. The evaporator coil has a stainless steel, double-pitched drain pan. The line features a modulating hot gas reheat coil for dehumidification. The double-wall construction with the interior liner provides a wipe-down surface so the interior can be kept clean.
Thermostat compatibility:DDC with space sensor.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The five stages of cooling control give the product excellent part-load efficiencies and stable space temperature control. Double-wall construction is standard. The unit controller has the ability for building pressure control with the exhaust fans.
Warranty information:Standard one-year parts with optional five-year compressor and/or 10-year furnace.
Special installation requirements:Manufacturer did not specify.
Contact:McQuay International; 800-432-1342; www.mcquay.com.
eProduct 200
Mitsubishi Electric Cooling and Heating Solutions
Model:PUHY-HP72T JMU-A split systemFootprint (inches):30 (length) by 36 (width) by 65 (height)
Serviceability features:Manufacturer did not specify.
Technical support:Available at 877-391-5550 from 8 a.m.-7 p.m. Eastern.
Technical support materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available online.
Noise-reduction features:The quiet operation can be attributed the units’ compressor compartments, which are sealed by metal panels to minimize sound levels in all directions.
IAQ equipment supported:Advanced line of Lossnay® energy recovery ventilators (ERVs) meet the growing demand for improved IEQ in buildings, while helping to satisfy requirements of ASHRAE standards 62 and 90.1. The ERV recaptures cooling and heating energy while equalizing humidity levels and removing harmful indoor pollutants. The Lossnay system’s compatibility with City Multi® and Mr. Slim® technology allows for easier maintenance and troubleshooting.
Thermostat compatibility:Brand-specific controllers allow for zone-by-zone, complete-system, building, even campuswide control capabilities. Enhanced features (beyond standard thermostats) include set-temperature limiting, and airflow speed and direction.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The Hyper-Heating Inverter (H2i™) technology is exclusively from Mitsubishi Electric and is available in select City Multi VRFZ models. It can continue to deliver 80 percent capacity at -13°F and doesn’t exhibit the drop-off seen by other units.
Warranty information:All City Multi products have standard one-year parts and seven-year compressors; a total of five-year parts for commercial system installations that were designed by a Diamond Designer™, installed by a contractor who completed the three-day service course, and a commissioning report was submitted and approved.
Special installation requirements:Installation is straightforward using standard industry tools and equipment. A factory service and install training class is offered.
Contact:Mitsubishi Electric Cooling and Heating Solutions; 678-376-2900; www.mehvac.com.
eProduct 201
Footprint (inches):18 (length) by 12 (width) by 32 (height)
Serviceability features:Complete built-in self-diagnostics direct a technician to a specific issue; washable filters speed up routine maintenance; front, side, and top panels allow for access to serviceable components; reliable system components mean worry-free maintenance.
Technical support:Available at 877-391-5550 from 8 a.m.- 7 p.m. Eastern.
Technical support materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Advanced line of Lossnay® energy recovery ventilators (ERVs) meet the growing demand for improved IEQ in buildings while helping to satisfy requirements of ASHRAE standards 62 and 90.1. The ERV recaptures cooling and heating energy and helps to equalize humidity levels and remove harmful indoor pollutants. The Lossnay system’s compatibility with City Multi and Mr. Slim technology allows for easy maintenance and troubleshooting.
Thermostat compatibility:Among other features, the PAR-W21 controller runs and stops the operation of a group of units, switches between operation modes, provides the option to establish a preset temperature range, and offers a weekly scheduler.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:W-Series outdoor units combine the convenience of water-source systems with VRF technology. These units can be installed indoors, which means system performance efficiency is independent of outdoor ambient temperatures.
Warranty information:All City Multi products have a standard one-year parts and seven-year compressors; a total of five-year parts for commercial system installations that were designed by a Diamond Designer™, installed by a contractor who completed the three-day service course, and a commissioning report was submitted and approved.
Special installation requirements:Do not install outdoors in a location where heat is trapped, on a structure that may cause leakage, or where corrosive gas is generated. Have the installation be able to protect against earthquake. Any installation deficiency may cause unit to fall, resulting in injury.
Contact:Mitsubishi Electric Cooling and Heating Solutions; 800-687-1966; www.mehvac.com.
eProduct 202
Raypak Inc.
Model:XFyre 300 - 850 boilerFootprint (inches):28 to 54 (length) by 22 (width) by 32 (height)
Serviceability features:Service access to all components, 24-inch front only needed, side-combustible clearances needed are zero, rear vents. Parts available in more than 60 locations throughout U.S.
Technical support:Available at all rep locations. See website for details and contact information.
Technical support materials:Visit website.
Noise-reduction features:Can barely be heard.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Built-in electronic controls.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Five sizes available from 300 to 850 MBtuh. Efficiency is 94 percent thermal full fire, to 99 percent. Indoor-outdoor; PVC, CPVC, and SS venting; SS heat exchanger; ASME H Stamp, low-NOx; indoor combustible clearance zero, except access; DSI ignition; fuel air synchronization; soft start; 5:1 turndown. Digital operating controls; 0-10 vdc; eight-boiler cascade capability. Unit can be installed outdoors. Easy-to-use digital control.
Warranty information:Manufacturer did not specify.
Special installation requirements:Top-mount water connections. Low-lead compliant. PVC vent from rear. Access to air filter is just behind front door.
Contact:Raypak Inc.; 805-278-5300; www.raypak.com.
eProduct 203
Reznor/Thomas and Betts
Model:Model SHH high-efficiency split systemFootprint (inches):72 (length) by 34 (width) by 44 (height)
Serviceability features:Manufacturer did not specify.
Technical support:Manuals are available online. For help specifying or other support, contact the local sales engineer at 800-695-1901, ext. 1.
Technical support materials:Installation, operation and maintenance manuals, parts manuals, wiring diagrams, and other technical documentation available in print or online. A replacement parts center page is available to registered users of the website.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:UV germicidal lamps available for neutralization of VOCs and airborne microorganisms. A variety of inlet air filters is available.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This commercial-industrial split system operates at 91 percent fuel efficiency.
Warranty information:The standard manufacturer’s HVAC equipment warranty applies. Extended five- or 10-year warranty available on the heat exchanger.
Special installation requirements:Manufacturer did not specify.
Contact:Reznor/Thomas and Betts; 800-695-1901; www.rezspec.com.
eProduct 204
Tempstar
Model:RGS181-183 package gas/electric rooftopFootprint (inches):128 (length) by 87 (width) by 49 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels have easy-grip handles and no-strip screws. Individual group control (IGC) solid-state control for on-board diagnostics with LED error code designation, burner control logic, and indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dedicated vertical or horizontal airflow duct configuration models. Unit features high- and low-pressure switches, freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), and medium- and high-static indoor fan option. Other options, such as liquid propane/high-altitude kits, are available.
Warranty information:Fifteen-year stainless steel heat exchanger; 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited on all other parts.
Special installation requirements:None.
Contact:International Comfort Products, LLC (ICP); 800-315-4370; www.gotempstar.com.
eProduct 205
Footprint (inches):74 (length) by 47 (width) by 41 (height)
Serviceability features:Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screws. All connections and troubleshooting points located in one place, the master terminal board. Large, laminated control wiring and power wiring drawings affixed to unit. Optional factory-installed integral, nonfused disconnect and field-powered, 115-V convenience outlet available.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation and operation manuals, and technical support-parts manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV) capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Convertible airflow design. Medium- or high-static indoor fan option. Other factory-installed options include economizer option and coastal outdoor coil-coating option. Four-way reversing valve rapidly changes the flow of refrigerant to change over from cooling to heating and heating to cooling.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:Fixed-orifice metering devices.
Contact:International Comfort Products LLC (ICP); 800-315-4370; www.gotempstar.com.
eProduct 206
Trane
Model:T/YHC092-120E package unitFootprint (inches):99 (length) by 63 (width) by 51 (height)
Serviceability features:These compact rooftop units fit into the same roof curb as current models, reducing installation time and costs. Preconfigured units come with factory-installed options to eliminate time-consuming accessory field installations. Precedent units offer access to filters, compressors, and controls through single-side access doors.
Technical support:Please contact local sales office.
Technical support materials:Wiring diagrams, RT-SVD03*-EN (Micro guide), Y_C, T_CSVB002-EN wiring manuals. Troubleshooting guides available through the office.
Noise-reduction features:A standard feature on the dual-compressor, high-efficiency units, the plenum fan offers quiet operation and reduced maintenance costs. Backward-inclined blade design performs at a whisper, allowing for a more efficient indoor sound-mitigation plan. Fewer blades to clean and maintain.
IAQ equipment supported:MERV 13 high-efficiency filtration option reduces the amount of particles in the air and provides better air quality. CO2 controls available to bring in more outside air when occupancy levels are higher. Hot gas reheat available for humidity control. Cleanable dual-sloped drain pans help reduce microbial growth.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The high-efficiency rooftop units are 15 percent more efficient than typical packaged equipment. Energy efficiency can be increased by adding Trane controls, and through proper installation and maintenance. The units offer three stages of cooling on high-efficiency, dual-compressor units for more precise temperature control.
Warranty information:Five-year compressor, five-year heat exchanger, parts only.
Special installation requirements:No belts; Precedent high-efficiency units feature direct-drive fan motors, reducing maintenance requirements and costs.
Contact:Trane; 931-648-5937; www.trane.com.
eProduct 207
WaterFurnace International Inc.
Model:Envision NXW Series heat pumpFootprint (inches):Manufacturer did not specify.
Serviceability features:Removable compressor access panels (on optional cabinet). Quick-attach wiring harnesses are used throughout. High- and low-pressure refrigerant service ports. Optional user interface for diagnostics and commissioning of FX controls. Dual refrigerant circuit.
Technical support:Dealer line is available at 888-929-2837, 7 a.m.-5:30 p.m. Eastern. Technical service pager is available after hours at 800-455-3624.
Technical support materials:Contractors have access to a secure website, where they can download spec manuals, installation manuals, service and troubleshooting guides, diagrams, and parts information.
Noise-reduction features:A compressor blanket and an optional insulated sheet metal cabinet ensure quieter operation. Optional vibration isolation springs reduce sound by 3 dB.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:A small footprint, reversible heating and cooling, and a modular design result in versatile installations for retrofits and new installations.
Warranty information:Contact local dealer for warranty information.
Special installation requirements:20-40 mesh strainers.
Contact:WaterFurnace International Inc.; 717-393-3831; www.waterfurnace.com.
eProduct 208
Footprint (inches):26 to 42 (length) by 22 (width) by 17 to 44 (height)
Serviceability features:The heat pump has two removable compressor access panels. The horizontal units have separate air handler and compressor sections, permitting service testing without air bypass. Quick-attach wiring harnesses; removable blower inlet rings allow for service without removing the blower housing.
Technical support:Dealer line is available at 888-929-2837 from 7 a.m.-5:30 p.m. Eastern. Technical service pager is available after hours at 800-455-3624.
Technical support materials:Contractors have access to a secure website, where they can download spec manuals, installation manuals, service and troubleshooting guides, diagrams, and parts information.
Noise-reduction features:Compressors mounted on a double isolation system. Sound package features multidensity, steel-laminate compressor “mass” base plate, designed to suppress low-frequency compressor noise; and a multidensity, laminate-lined compressor blanket designed to surround the compressor on all six sides and suppress low-frequency noise.
IAQ equipment supported:MERV 13 filters, composite drain pans, foil-faced insulation.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The unit represents an improvement in the commercial water-source heat pump. The product features high efficiency with standard options in a compact cabinet, suitable for both retrofit and new construction applications. The product is also targeted to provide optimum performance and flexibility in both water-loop and geothermal applications.
Warranty information:Contact local dealer for warranty information.
Special installation requirements:Manufacturer did not specify.
Contact:WaterFurnace International Inc.; 717-393-3831; www.waterfurnace.com.
eProduct 209
Publication date:08/23/2010
