Most hydronic systems are filled with "Plain Jane" tap water. However, today, more than ever, "Plain Jane" water may not be so plain. If you are not testing your fill water, you are guessing, and potentially compromising, the system.
The trend towards the use of refrigerant 410A continues to grow and there is a demand for technicians who are comfortable working with this higher-pressure replacement for R-22.
Many refrigeration compressors incorporate a suction service valve and a discharge service valve. Working with these valves is not difficult, but there are some finer points to remember.
To totally "clean" indoor air, gases and vapors must be removed. For HVAC applications, activated carbon is commonly used. Why and how it is applied are detailed.
In this edition of the Btu Buddy series, Bob is helping finish a job that a new construction crew installed. The installers left the gas line and liquid line on a heat pump turned up all weekend and it rained in the tubing. Bob must dry out the system.
Filter-driers play a pivotal role in the operation of air conditioning and refrigeration systems. As important as the filter-drier is, many actually do not understand how it works. Here are some details.
A common cause of premature reciprocating compressor failure is overheating. A recip that is running too hot will surely fail before its time. A service tech should always look for this potential problem while servicing any refrigeration system.
Many times technicians will have the tendency to overcharge refrigeration systems. Many symptoms for other system problems look similar, but they are not exactly like an overcharge of refrigerant.
RSS