Doing it right does not mean adding hours to the job. In fact, with the right tools you can do it right and save a ton of time. In this two-part series, I will discuss several ways to make your technicians faster and more productive during a typical replacement of a split system a/c unit or heat pump.
Criminal behavior and running from the law are likely the furthest things from the mind of the everyday HVACR contractor or technician. It is important, however, that these individuals understand the responsibilities inherent to those who work with what is classed as hazardous materials and greenhouse gases.
Every year there was at least one unexplainable low-refrigerant service call, but when more than 10 occurred in 2009, executives at HVAC contractor Advanced Air and Refrigeration suspected more than phantom leaks. Professional thieves were the initial suspects. But the company soon determined the problem was due to huffing.
The 10 winners of the 2011 AHR Expo Innovation Awards represent some of the most innovative new products in the HVACR industry, according to the judges, members of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), who evaluated submissions based on innovation, application, value to the user, and market impact.
Refrigeration contractors and technicians who work in the domestic refrigeration sector should be aware of increased efficiency standards that are also affecting ice making equipment and room air conditioners. And all those in refrigeration should look at such efficiency upgrades as a growing trend across the board.
While refrigeration in supermarkets information ran throughout sessions at the Food Marketing Institute Energy & Store Development Conference, it also found itself as a stand-alone topic during several concurrent breakout sessions and as a front and center focus of a general session.
This article explores how a restricted metering device will affect system performance and efficiency. The system is a commercial refrigeration system with a TXV as the metering device. The refrigerant being used is HFC-134a. Very similar results will occur if an automatic expansion valve (AXV) is used.
The actual frequency and tasks performed will vary from system to system. However, here are some generic maintenance tasks which can be applied to many refrigeration systems. These tasks can be divided into two groups: one for maintaining the cabinet and one for maintaining the refrigeration system.
A recurring theme in refrigeration over the years has been efforts to bring equipment running on hydrocarbon (HC) refrigerants to the United States market. The first foray in this regard has been to establish a beachhead in domestic refrigerators, as such equipment running on the HC propane is common in Europe.
The 3C Hybrid Condenser was developed by Muller Industries to help mitigate the impact of increasingly hot ambient conditions that are causing air-cooled refrigeration and air conditioning systems to lose cooling capacity while consuming more energy. It is particularly well suited for supermarkets with their continuous need for refrigeration.