Rockwell Automation: Motors

The Reliance Electric® Sabre™ line of motors is featured in a new piece of literature. These rolled steel ac motors are designed in 3 to 30 hp in NEMA frame sizes from 182T to 286T, with 3,600, 1,800, or 1,200 rpm. This brochure features a number of color photographs and a diagram labeling the motor’s most notable features. Detailed product information helps explain features and benefits.

Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615; 864-281-2171; 864-281-2433 (fax);

www.reliance.com (website). eProduct #52

Henry Technologies: CD-ROM Catalog

This CD-ROM features the company’s entire product line. Included are technical sheets and specifications on the following products: flow control products (ammonia and halocarbon), compressor protective devices from AC&R Components, and heat transfer products and pressure vessels by Chil-Con. Flow charts highlight the refrigeration line. Tech Tips, the corporate brochure, a list of sales offices, and a fax form for obtaining more information on products are also on the CD.

Henry Technologies, 3215 North Ave., Melrose Park, IL 60160; 708-344-1100; 708-344-0026 (fax); www.henrytech.com (website).

eProduct #53

Multiaqua: Chillers

This specification sheet offers detailed performance, dimensional, component, and efficiency data on the MAC air-cooled chillers for res-idential and light commercial new construction, replace-ment, and retrofit applic-ations. Information covered includes physical data, such as coil and chiller heights and shipping weight in both English and metric measure-ments; voltage; electrical data, capacity/watts/EER; and glycol solution data. Some installation and warranty information is also listed on the sheet.

Multiaqua, 2701 S.W. 145th Ave., Suite 220, Miramar, FL 33027; 954-431-1300; 954-431-1303 (fax); www.multiaqua.com (website).

eProduct #54

Infrared Heaters

The improved HL-2 and DX-2 Series gas-fired, infrared tube heaters are the subjects of new literature. The DX-2 brochure discusses the theory of operation and how the unit works; typical installations; the new and established construction features, including circuit board located out of the airstream and pressure switch mounting brackets; operational features and specifications. Covered in the HL-2 two-stage infrared heaters brochure are new features of the series, reasons to choose this heater, specifications, and technical data.

The improved HL-2 and DX-2 Series gas-fired, infrared tube heaters are the subjects of new literature. The DX-2 brochure discusses the theory of operation and how the unit works; typical installations; the new and established construction features, including circuit board located out of the airstream and pressure switch mounting brackets; operational features and specifications. Covered in the HL-2 two-stage infrared heaters brochure are new features of the series, reasons to choose this heater, specifications, and technical data.

Detroit Radiant Products Co., 21400 Hoover Rd., Warren, MI 48089; 810-756-0950 or 800-222-1100; 810-756-2626 (fax); www. reverberray.com (website). eProduct #55

Baldor Electric Co.: Torque Fan and Pump Inverters

The company offers a two-page flyer on varaible torque fan and pump inverters. Series 15V inverters are available for 1 to 75 hp. Features include overload capacity of 115%; PID process control operation; process follower inputs 0-5 V, 0-10 V, 4-20mA; through-wall mounting capability; digital operator control; and English character diagnostic displays.

Baldor Electric Co., P.O. Box 2400, Fort Smith, AR 72902-2400; 501-646-4711; www.baldor.com (website).

eProduct #56

MSA Instrument Division: Refrigerant Monitor

A four-page data sheet #07-2016, details the features and operation of the Chillgard® RT refrigerant monitor. The sheet lists performance and operating specifications and highlights instrument sensing technology, expandability, simplicity, and upgradeability. The most common application is for chillers located inside machinery rooms.

MSA Instrument Division, P.O. Box 427, Pittsburgh, PA 15230-0427; 800-672-4678, ext. 8731; www.MSAnet.com (website).

eProduct #57

Certainteed Corp.: Duct Liner

Literature illustrating the differences between CertainTeed’s ToughGard™ duct liner with enhanced surface and other liners is now available. Brochure #30-33-009 details the INDA standard test method for water repellency. Unlike the surfaces of some competitive liners, the “breathable” coating preserves the sound-dampening performance of the duct liner, says the company. It allows sound waves to pass through the open-cell structure and into the sound-absorbing glass fiber mat, says the manufacturer.

Certainteed Corp., Insulation Group, P.O. Box 860, Valley Forge, PA 19482; 800-233-8990.

eProduct #58

Smith Equipment Co.: Gas Regulation Products

A new, full-line catalog presents detailed descriptions of the company’s patented technology and product line, including the newest oxyfuel cutting, welding, brazing/ soldering, heating, and gas regulation products. In addition to specifications and descriptions, the catalog features product photos and an easy-to-use table of contents. A 131-page master catalog for distributors also includes showroom display information, merchandising options, and a quick reference section to locate part numbers.

Smith Equipment Co., c/o Inquiry Intelligence Systems, attn: Marcia, 18 N. Central Ave., O’Fallon, MO 63366; 800-843-7912; 800-685-3370 (fax); smith@smithequipment.com (e-mail); www.smithequipment.com (website).

eProduct #59

Dwyer Instruments: Controls and Gauges

The 2001 “Controls & Gages Catalog” features more than 3,500 precision instruments, including more than 40 new ones, and has been redesigned to make it easier for the user to locate items in the catalog. For example, sections now headed “Data Acquisition” and “Humidity” eliminate the need to hunt for dataloggers or humidity transmitters in the larger category of “Temperature.” The catalog places prices for all products and models adjacent to photos, descriptions, and diagrams of each item. It also integrates reference materials, such as air velocity flow charts, gas conversion curves, and other information. Product ordering information includes schedules for discounts.

Dwyer Instruments, P.O. Box 373, Michigan City, IN 46361; 219-879-8000; 219-872-9057 (fax); info@dwyer-inst.com (e-mail); www.dwyer-inst.com (website).

eProduct #60

InstrumentationGroup.com: Temperature Sensing Probes

An affiliation of instrument manufacturers has released a 12-page guide for Italcoppie temperature sensing probes, connection systems, thermo-couples, and thermistors. The catalog lists probes in a wide variety of diameters and lengths, and has a probe overview and selection guide to aid in the specification and application process. Spec-ialized, waterproof probes are featured that are able to function in hostile environments such as piping in gas turbines or exterior hvac use. Probe mounting accessories and protection tubes with compression fittings are also offered.

InstrumentationGroup.com, 234 Weaverville Highway, Asheville, NC 28804-1228; italcoppie@instrumentation group.com (e-mail); www.instrumentationgroup.com (website).

eProduct #61