Proper evacuation of a refrigeration system is an important part of repairing or installing a unit, and the gas ballast in the vacuum pump helps improve the process.
Evacuation is often called “vacuum” or “pulling a vacuum,” and it’s one of the most important parts of the HVACR installation and repair process where the refrigerant circuit is involved. Our goal should be to keep the closed refrigeration circuit clean, dry, and tight — just like I was taught since the very first week of HVAC school.
TruBlu is resistant to abrasion and crushing and can be knocked back to round if accidently flattened. Additionally, the UV compounding has excellent weather resistance to provide years of reliable service.
Filter driers are designed to remove foreign materials, such as moisture, dirt, sandpaper grit, soldering flux, small solder beads, and acid from a refrigeration or air conditioning system. However, filter driers are notorious for becoming restricted from moisture, sludge, dirt, or oil that has entered the system from a poor service practice or extreme operating conditions.
Keeping a system clean, dry, and tight really comes down to service technicians and how they handle installing or servicing a system. Here are some basic installation and service procedures that will ensure we always leave a system clean, dry, and tight.
The increased use of high pressure refrigerants has created new challenges for technicians, yet it is still possible to perform high speed recovery of high pressure refrigerants. The tips and practices in this article will help keep your refrigerant recovery speeding toward the finish.
Part 1 of this series discussed methods to significantly reduce recovery times and brazing techniques to significantly reduce the time required for evacuation. This article covers system commissioning, including tools and techniques that reduce the time required for pressure testing, evacuation, setting airflow, charging, and performance testing.