Included in this coverage is the 2012 Residential Cooling Showcase product grid (see the PDF link at the bottom of this article). The manufacturers provided the description of features included with each product. For more information, please contact the manufacturers or their distributors.
Air Ease
Model: 4SHP16LT split system heat pump
Footprint (in inches): 27 (length) by 25 (width) by 30 (height)
Serviceability features: Removable (two screws) louvered panels to access coils and four screws to easily access the fan assembly. Double and single concentric knockouts for electrical connections. Ground lugs standard. Corner-mounted service valves for easier access. Defrost control with built-in diagnostics.
Technical support: Available Monday to Friday from 8 a.m. to 5 p.m. Eastern time at 800-515-3501. Online information available at www.airease.com. YouTube channel: youtube.com/alliedairenterprise.
Technical support materials: Wiring diagram, troubleshooting information, installation data performance, parts and accessories documentation available.
Noise-reduction features: High-density sound blanket, anti-vibration compressor pads, and sound-reducing fan discharge top.
IAQ equipment supported: Compatible with most IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Enhanced diagnostics provide valuable information to service/installation technicians to increase their professionalism. Also available in air conditioner configuration.
Warranty information: 10-year compressor, 10-year parts with online registration.
Special installation requirements: None.
Contact: Allied Air Enterprises, 803-738-4082; www.alliedair.com.
eProduct 160
Amana
Model: APD14 dual-fuel heat pump
Footprint (in inches): 51 (length) by 47 (width) by 34 (height)
Serviceability features: Convenient access panels, all blower operations, and all safety circuits are complete with self-diagnostics, loss-of-charge protection, and one roof curb fits all units.
Technical support: Available from local distributor at 888-593-9988, online at www.amana-hac.com, PartnerLink, and SmartContractor mobile application.
Technical support materials: Full technical support materials are available from local distributor toll free at 888-593-9988, online at www.amana-hac.com, PartnerLink, and SmartContractor mobile application.
Noise-reduction features: Direct spark ignition, fully insulated heavy-gauge cabinet, and energy-efficient EEM motor.
IAQ equipment supported: All applicable packaged unit IAQ products are compatible.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Unique dual diameter, stainless steel Million-Air stainless steel heat exchanger combines cooling with heat pump and gas heating for optimal year-round performance, and one roof curb fits all units.
Warranty information: Lifetime compressor limited, lifetime heat exchanger limited, 10-year parts limited.
Special installation requirements: None.
Contact: Amana, 713-263-5064; www.amana-hac.com.
eProduct 161
Model: ASZC18 heat pump
Footprint (in inches): 35 (length) by 35 (width) by 38 (height)
Serviceability features: ComfortNet communicating system compatible, expanded ComfortAlert diagnostics, top and side access, sweat connection
service valves, single panel access to controls with space provided for field-installed accessories.
Technical support: Available from local distributor, toll free at 888-593-9988, or online at www.amana-hac.com, PartnerLink, and via SmartContractor mobile application.
Technical support materials: Full technical support materials are available from local distributor, toll free at 888-593-9988 or online at www.amana-hac.com, PartnerLink, and via SmartContractor mobile application.
Noise-reduction features: High-density compressor sound blanket, quiet ECM-style condenser fan motor, Amana brand sound control top design, scroll compressor, and high-capacity discharge muffler.
IAQ equipment supported: Supports all residential IAQ products, components, and systems.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Myriad factory-installed standard features including bi-flow filter line drier, suction-line accumulator, compressor crankcase heater, high-capacity discharge muffler, coil and ambient temperature sensors, SmartShift defrost control technology, and diagnostic indicator lights with storage of six fault codes.
Warranty information: Lifetime unit replacement limited, 10-year parts limited.
Special installation requirements: None.
Contact: Amana, 713-263-5064; www.amana-hac.com.
eProduct 162
American Standard Heating & Air Conditioning
Model: Platinum XV air handler (AAM7)
Footprint (in inches): 50 to 62 (length) by 18 to 24 (width) by 22 (height)
Serviceability features: Modular cabinet disassembles for single-person installation. Cabinet-front sightglass allows circuit board diagnostic lights to be viewed without door panel removal. Coil and blower pull out, thanks to an exclusive new integrated rail system for easy service. Panel identifiers facilitate easier installation and service.
Technical support: Contact local distributor.
Technical support materials: The ASDealerNet intranet site allows quick access to the most current support materials — including catalog pages, installer guides, service facts, product data, submittals, and owners’ manuals.
Noise-reduction features: The Vortica™ blower is designed for quiet efficient operation and uses less energy than conventional blowers to deliver more air, while reducing energy consumption, carbon emissions, and noise. The unique blow-through cabinet design with double-wall construction and enclosed foam insulation provides quiet operation year after year.
IAQ equipment supported: The additional AccuClean™ whole-home air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, more comfortable home.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Constructed more like a refrigerator than a typical air handler, with insulation fully enclosed between double walls of the innovative cabinet design, preventing condensation. In addition to eliminating sweating, the cabinet eliminates the loose fibers from fiberglass insulation that may enter the airstream with other air handlers.
Warranty information: 10-year registered limited on internal functional parts. If the product is not registered within 60 days of installation, base limited terms will apply. Optional extended warranties are available.
Special installation requirements: None.
Contact: American Standard Heating & Air Conditioning, 903-730-4404; www.americanstandardair.com.
eProduct 163
Model: Platinum XV geothermal split system
Footprint (in inches): 27 (length) by 36 (width) by 24 (height)
Serviceability features: Internally mounted pump pack; geo-start option; on-board diagnostics; freeze protection switch cycles to protect compressor during extreme cold outdoor temperatures; weatherized cabinet protects internal components.
Technical support: Contact local distributor.
Technical support materials: The ASDealerNet intranet site allows quick access to the most current support materials — including installer guides, service facts, product data, and owners’ manuals.
Noise-reduction features: Scroll compressors installed on isolation grommets to minimize noise.
IAQ equipment supported: The additional AccuClean whole-home air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, more comfortable home.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: With up to 25.1 SEER, this system offers the comfort of single- and two-stage heating and cooling. It can work in conjunction with an air handler or with an indoor furnace to provide comfortable temperatures from two different sources.
Warranty information: 10 years parts and labor.
Special installation requirements: None.
Contact: American Standard Heating & Air Conditioning, 903-730-4404; www.americanstandardair.com.
eProduct 164
Arcoaire
Model: DXC 1600 air conditioner
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 29 to 47 (height)
Serviceability features: Text-based diagnostics capabilities with Observer™ communicating wall control (TSTAT0101SC). Innovative control box design. High- and low-pressure switches. Three-piece grille panels are easy to remove separately to view and clean. Easy access service valves on all models. Only two screws to access service panel. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoArcoaire.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoArcoaire.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors and isolation compressor grommets to minimize sound at maximum performance. Compressor sound blanket standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star ratings with selected coil-only combinations in every size. Up to 16.5 SEER efficiency rating. Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Arcoaire Five-Year No Hassle Replacement™ limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoArcoaire.com.
eProduct 165
Model: DXT+ air conditioner (HCA7)
Footprint (in inches): 32 to 36 (length) by 36 to 39 (width) by 43 to 51 (height)
Serviceability features: Text-based diagnostics with Observer communicating wall control (TSTAT0101SC). Innovative control box design. Three-piece grille panels are easy to remove separately to view and clean. Easy access to service valves on all models. Only two screws to access control panel. High- and low-pressure switches. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoArcoaire.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoArcoaire.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with UltraTech™ compressors and isolation compressor grommets to minimize sound at maximum performance. High-performance compressor sound shield standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Communicating, self-configuring operation with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen. Provides two-stage comfort. Efficiencies up to 17.5 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Arcoaire 10-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within 10 years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: TXV expansion devices recommended for maximum system reliability. The units must be installed with a fan coil or furnace capable of supporting two-stage cooling.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoArcoaire.com.
eProduct 166
Armstrong Air
Model: 4SCU18LT split system air conditioner
Footprint (in inches): 38 (length) by 36 (width) by 44 (height)
Serviceability features: Removable (two screws) louvered panels to access coils. Four screws to easily access fan assembly. Double and single concentric knockouts for electrical connections. Ground lugs standard. Corner-mounted service valves for easy access.
Technical support: Available Monday to Friday from 8 a.m. to 5 p.m. Eastern time at 800-515-3501. Online availability of installation manuals at www.armstrongair.com. YouTube channel: youtube.com/alliedairenterprise.
Technical support materials: Wiring diagram, troubleshooting information, installation data, parts, and accessories documentation are available.
Noise-reduction features: High-density sound blanket, anti-vibration compressor pads and sound-reducing fan discharge top. Swept-wing fan blade reduces sound by cutting through the air, rather than slapping against it.
IAQ equipment supported: Compatible with most IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Enhanced diagnostics help elevate the professional image of service/installation technicians. Also available in heat pump configuration.
Warranty information: 10-year compressor, 10-year parts with online registration.
Special installation requirements: None.
Contact: Allied Air Enterprises, 803-738-4082; www.alliedair.com.
eProduct 167
Bard
Model: GeoTec geothermal heat pump
Footprint (in inches): 26 to 27 (length) by 27 to 32 (width) by 48 to 55 (height)
Serviceability features: Features high-efficiency two-stage step capacity scroll compressor, R-410A refrigerant, and variable-speed ECM motor for superior efficiencies and quiet performance. Service features include left or right side water connections outside of cabinet, left- or right-hand access to control panel, slide-in electric heat packages, and simplified wiring and troubleshooting.
Technical support: In-house and field training classes available. State continuing education credits offered. Service provided through distribution network.
Technical support materials: Service parts guide, wiring diagrams, installation manuals (digital and printed formats), website.
Noise-reduction features: Copeland scroll step-capacity compressor, ECM blower motor, service compartment insulated to reduce noise levels.
IAQ equipment supported: Compatible with field-installed electronic air cleaners or high-efficiency media type filters through installing dealers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Suitable for ground water or ground loop applications. Features multi-capacity two-stage compressor, variable-speed ECM blower motor, R-410A, Energy Star efficiency rating, built-in domestic hot water heat exchanger, COP ratings up to 5.4, and EER ratings up to 30.6.
Warranty information: Limited 10-year parts.
Special installation requirements: None.
Contact: Bard Manufacturing Co. Inc., 419-636-1193; www.bardhvac.com.
eProduct 168
Model: Geo-Trio geothermal heat pump
Footprint (in inches): Varies.
Serviceability features: Multi-position system, suitable for upflow, downflow, horizontal left or right, split, and dual-fuel configurations. Step capacity two-stage scroll compressor, R-410A refrigerant, variable-speed ECM motor, domestic hot water heat exchanger system, high- and low-pressure switches standard, insulated high-efficiency coaxial water coil. All water and refrigerant connections on outside of cabinet for ease of installation. Certified coil combination for hybrid dual-fuel use. Energy Star certified.
Technical support: Available through local distribution network.
Technical support materials: Service parts guides, wiring diagrams, installation manuals, website (printed and digital).
Noise-reduction features: Compressor/service compartment insulated to reduce noise levels, variable-speed ECM blower motor and step-capacity two-stage compressor with double isolation mounting system designed for quieter operation.
IAQ equipment supported: Compatible with field installed electronic air cleaner or high-efficiency media type filters through installing dealer.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Three separate sections (A-coil, blower coil, and compressor) are each self-contained, allowing for multiple configurations (upflow, downflow, horizontal left or right, as well as split system and dual fuel). Fewer SKUs with more product offering.
Warranty information: Five-year parts, 10-year compressor standard. If registered, 10-year all parts.
Special installation requirements: None.
Contact: Bard Manufacturing Co. Inc., 419-636-1194; www.bardhvac.com.
eProduct 169
Bosch Thermotechnology
Model: TA ground-source heat pump
Footprint (in inches): 33 (length) by 26 (width) by 66 (height)
Serviceability features: Cabinet is designed with several service panels to allow easy access to key components for service and maintenance. Easy filter replacement with twist-off screws on the filter rack access door.
Technical support: Technical applications/service team readily available to support growing customer base.
Technical support materials: Technical specification sheets are available at www.bosch-climate.us.
Noise-reduction features: Cabinet insulation, door seals, floating base pan to reduce noise due to vibration and compressor sound blankets.
IAQ equipment supported: The unit’s 2-inch filter rack can support MERV 11 or MERV 13 filters.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Recognized by Energy Star as being the most efficient ground-source heat pump in the North American market for 2011.
Warranty information: 10-year whole unit parts and labor allowance.
Special installation requirements: Manufacturer did not specify.
Contact: Bosch Thermotechnology, 954-513-3651; www.bosch-climate.us.
eProduct 170
Broan
Model: iQ Drive FT4BG split system heat pump
Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, and external common suction port.
Technical support: Call 800-422-4328 to talk to a technician from 8 a.m. to 4:30 p.m. Central time, Monday to Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept-wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests, perfect fix media filter for air handler applications, as well as electronic air cleaners.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system, from a two-stage heat pump thermostat.
Warranty information: 10-year parts with registration and 10-year Quality Pledge to replace the unit if the compressor fails.
Special installation requirements: None.
Contact: Broan; www.broanhvac.net.
eProduct 171
Model: iQ Drive R6GI package gas/electric unit
Footprint (in inches): Up to 64 (length) by 47 (width) by 47 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, electronic expansion valve, and external service ports.
Technical support: Call 800-422-4328 to talk to a technician from 8 a.m. to 4:30 p.m. Central time, Monday to Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept-wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system, from a two-stage thermostat.
Warranty information: 10-year parts with registration and a 10-year Quality Pledge to replace the unit if the compressor or heat exchanger fails.
Special installation requirements: None.
Contact: Broan; www.broanhvac.net.
eProduct 172
Bryant
Model: Evolution® Extreme 280ANV heat pump
Footprint (in inches): 35 (length) by 35 (width) by 44 (height)
Serviceability features: Evolution control can display system history for faster diagnosis of the complete system. Allows a service technician to attach a second control to outdoor unit for service without entering the home, and to access system remotely with a remote access module (sold separately) via the Internet to prepare for service call in advance if connected to a Wi-Fi network.
Technical support: Support provided through nationwide network of local distributors.
Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, and wiring diagram on www.HVACpartners.com.
Noise-reduction features: The Aero Quiet™ system includes sound-deadening features in the cabinet, fan system, and top for better airflow, lower noise, and better efficiency. These features include quiet motor mounts, a compressor sound blanket, forward-swept fan blades, a sound elimination compressor mounting plate, and an integrated silencer airflow baffle top.
IAQ equipment supported: As part of an installed system, compatible with Bryant IAQ system components: humidifiers, ventilators, UV lamps, and the Evolution air purifier.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Achieves cooling efficiencies up to 20.5 SEER plus ultra-high heating efficiency up to 13.0 HSPF. Offers high-tech, variable-speed technology with ease of installation, service, and maintenance. Variable-speed capacity control offers higher heating capacity at lower outdoor temperature so the system uses auxiliary heat less often.
Warranty information: 10-year parts limited (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details).
Special installation requirements: None.
Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.Bryant.com.
eProduct 173
Model: PA13NR split system
Footprint (in inches): 23 to 31 (length) by 23 to 31 (width) by 25 to 42 (height)
Serviceability features: One access panel provides access to electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.
Technical support: Support provided through nationwide network of local distributors.
Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, and wiring diagram on www.HVACpartners.com.
Noise-reduction features: A sound elimination compressor mounting plate creates a buffer between the compressor and base pan to minimize sound from vibrations.
IAQ equipment supported: As part of an installed system, compatible with Bryant IAQ system components, including humidifiers, ventilators, UV lamps, and air purifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Unit is shipped with a dry nitrogen charge to give dealers a simple option for replacing condensing unit on an existing R-22 system.
Warranty information: Five-year parts limited to original homeowner. See warranty certificate for details.
Special installation requirements: None.
Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.Bryant.com.
eProduct 174
Carrier
Model: 24ANB7 Infinity® air conditioner (coastal model)
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 40 to 47 (height)
Serviceability features: Communication between system components allows the Infinity control to display system history for faster diagnosis of the complete Infinity system. Allows a service technician to attach a second control to outdoor unit for service without entering the home, and to access system remotely with a remote access module (sold separately) via the Internet to prepare for service call in advance if connected to a Wi-Fi network.
Technical support: Support provided through nationwide network of local distributors.
Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, wiring diagram, and service manual on www.HVACpartners.com.
Noise-reduction features: Achieves low sound ratings with quiet motor mounts, a compressor sound blanket, forward-swept fan blades, a laminated sound elimination compressor mounting plate, and a unique top with integrated silencer airflow baffle.
IAQ equipment supported: As part of an installed system, compatible with Carrier IAQ system components: humidifiers, ventilators, germicidal UV lamps, and the Infinity air purifier.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Cabinet is double-painted and fins are covered with a special epoxyphenolic coating to provide added corrosion resistance in coastal areas. When air conditioner is coupled with a Carrier humidifier, Infinity control, and variable-speed furnace or fan coil, the Ideal Humidity System® function controls humidity even when the system isn’t actively heating or cooling.
Warranty information: 10-year parts limited (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details).
Special installation requirements: None.
Contact: Carrier, 800-946-2930; www.residential.carrier.com.
eProduct 175
Model: 25VNA Infinity 20 heat pump with Greenspeed™ intelligence
Footprint (in inches): 35 (length) by 35 (width) by 44 (height)
Serviceability features: Communication between system components allows the Infinity control to display system history for faster diagnosis of the complete system. Allows a service technician to attach a second control to outdoor unit for service without entering the home, and to access system remotely with a remote access module (sold separately) via the Internet to prepare for service call in advance if connected to a Wi-Fi network.
Technical support: Support provided through nationwide network of local distributors.
Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, and wiring diagram on www.HVACpartners.com.
Noise-reduction features: Achieves low sound ratings with soft motor mounts, a compressor sound blanket, forward-swept fan blades, a laminated sound elimination compressor mounting plate, and a unique top with integrated silencer airflow baffle. Variable-speed compressor and variable-speed ECM fan motor operate at quieter lower speeds most of the time.
IAQ equipment supported: As part of an installed system, compatible with Carrier IAQ system components: humidifiers, ventilators, germicidal UV lamps, and the Infinity air purifier. When paired with Infinity control and variable-speed furnace or fan coil, provides Ideal Humidity System® functionality, which monitors and controls both temperature and humidity even when the system isn’t actively heating or cooling.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: With an HSPF of up to 13, it is the highest heating efficiency rated, ducted, air-source heat pump available. Achieves cooling efficiencies of up to 20.5 SEER. Wide cooling capacity range for enhanced dehumidification. Makes state-of-the-art, variable-speed technology available with ease of installation, service and maintenance.
Warranty information: 10-year parts limited (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details).
Special installation requirements: None
Contact: Carrier, 800-946-2930; www.residential.carrier.com.
eProduct 176
Century
Model: HTD GeoLogix Series geothermal heat pump
Footprint (in inches): 26 to 31 (length) by 22 to 25 (width) by 52 to 62 (height)
Serviceability features: Performance monitoring system signals potential problem so maintenance can be scheduled before lockout can occur. Access panels on three sides are easily removed. Removable blower inlet ring allows easy access to the fan and motor. Safety features protect the unit from high pressure, loss of refrigerant, condensate overflow, etc.
Technical support: Experienced service technicians are available to answer questions about installation, operation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives throughout the U.S. and Canada can also provide assistance, and training classes are offered at company headquarters and other cities in the U.S. (fee charged for two-day training).
Technical support materials: Technical documentation includes a comprehensive installation, operation, and maintenance manual with troubleshooting instructions and start-up/checking procedures. The Engineering Design Guide includes specifications, performance data, antifreeze correction charts, and wiring diagrams. These can be viewed or downloaded from the website, or they can be emailed upon request. For parts information, contact customer service at 517-787-2100.
Noise-reduction features: Double spring and grommet isolation mounting system for compressor and flexible torsion motor mounting reduce vibration and related operational noise. Compressor compartment is insulated; compressor and air handler compartments are separated by insulated divider. Discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported: Extra-large filter captures contaminants and is located on the side for easy change-out. Because two-stage model does not cycle on/off but runs continuously when there is demand — but at low speed most of the time — air is pulled across the filter whenever compressor is operating, enhancing indoor air quality.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Hot water generator is standard, utilizing excess heat energy from the heat pump to help satisfy domestic hot water requirements. Air coil is tin-plated to provide superior corrosion protection. ECM blower motor automatically adapts to system requirements for consistent indoor temperatures. Performance monitoring system and safety features protect the system.
Warranty information: 12-year compressor and parts, plus five-year labor allowance for warranty work; some limitations apply, see printed warranty on website or packed with unit for details. AssurancePlus extended service agreements available; contact Century representative for details.
Special installation requirements: Extended operating range makes HTD Series suitable for virtually all applications and climates. Engineering Design Guide and IOM provide comprehensive instructions on installation procedures, and free LoopLogix software can be used to design loop field. All models have TXVs and ½- and ¾-inch electrical knockouts.
Contact: Heat Controller Inc., 517-787-2100; www.century-hvac.com.
eProduct 177
Model: VMH18FC InverterFlex ductless mini-split heat pump
Footprint (in inches): Indoor unit: 40 (length) by 8 (width) by 12 (height)
Serviceability features: Self-diagnostics including error codes shown on LED display help identify operational problems. Cover of inside unit is easily removed for access to components; service ports on outdoor units are easily accessed.
Technical support: Experienced service technicians are available to answer questions about installation, operation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives throughout the U.S. and Canada can also provide assistance; their contact information is shown on the website under “Where to Buy.”
Technical support materials: Technical documentation includes a comprehensive installation, operation, and maintenance manual, an owner’s manual with troubleshooting instructions, and a service manual with wiring diagrams, etc.; a complete parts list is also available. These can be viewed or downloaded from the website, or they can be emailed upon request.
Noise-reduction features: Inverter units are exceptionally quiet because the DC compressor runs mostly at low RPMs, which minimizes any noise or vibration; also the operational sound of the compressor and fan is kept outside with the condensing unit, while a high-tech fan in the indoor unit delivers balanced airflow for whisper-quiet operation.
IAQ equipment supported: Triple filtration helps improve IAQ: an ionizer removes odors and microscopic particles from the air; an active carbon and dust filter removes pollen, dust, and smoke; and a freshening filter helps freshen the air. Also, as long as the unit is turned on the fan runs constantly, circulating air and pulling it across the filters for enhanced indoor air quality.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Mix-and-match systems allow cooling/heating of two, three, or four rooms with one outdoor condenser. Indoor units in new 18,000 Btuh capacity can be mixed with 9,000 and 12,000 Btuh units, until their combined capacity reaches the total system capacity; there are nine possible combinations from 27,000 to 36,000 Btuh. Low ambient operation allows cooling from 5˚ to 122˚F. Includes multiple modes, random swing, auto restart; thermostat is built into unit.
Warranty information: Six-year compressor, two-year parts with product registration; some limitations apply, see printed warranty on website or packed with unit. AssurancePlus extended service agreements are available; details on website or from a Century representative.
Special installation requirements: IOM gives tips for location selection, also specifications for maximum/minimum line set length and maximum outdoor elevation. Recommended indoor/outdoor connecting cable is 14 AWG/4 conductor 600V THHN unshielded stranded bare copper. Power comes from outdoor unit so no special indoor wiring or outlets are needed.
Contact: Heat Controller Inc., 517-780-3215; www.century-hvac.com.
eProduct 178
ClimateMaster
Model: Tranquility® 22 Digital Series (TZ) geothermal heat pump
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Offers multiple side removable panels offering easy installation and service access. Its swing-out style control box provides easy access for maintenance and repairs. The integral digital communicating controller provides comprehensive set-up and diagnostic capabilities with the variable-speed geothermal source pump, fan motor, and thermostat.
Technical support: Available at 405-745-6000.
Technical support materials: All wiring diagrams, installation instructions, and submittals available online.
Noise-reduction features: Tubing design and elimination of metal-to-metal contact, along with dual-stage compressor vibration isolation, flexible rubber motor mounting, and insulated heavy gauge steel cabinet combine to make an extremely quiet unit.
IAQ equipment supported: The multi-stage capacity and selectable dehumidification fan settings along with pleated MERV 8 rated air filter and air handling compartment lined with washable foil-faced insulation add up to an IAQ friendly product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This unique industry-changing product incorporates high-end features like a two-stage compressor, Energy Star Tier 3 efficiency, variable-speed fan, communicating digital controls and true plug-and-play functionality at a very competitive price point. It also has a small footprint, making it suitable for installation in tight places.
Warranty information: Standard limited coverage of 18 months from time of shipment or 12 months from start-up, whichever comes first. Optional warranties include four-year control board, four-year compressor, and four-year refrigerant.
Special installation requirements: Manufacturer did not specify.
Contact: ClimateMaster, www.climatemaster.com.
eProduct 179
Coleman
Model: Comforteer™ Series TCGF air conditioner
Footprint (in inches): 29 (length) by 29 (width) by 28 (height)
Serviceability features: This unit has easy service access with fully exposed refrigerant connections and a single panel covering the electrical controls. Secured reusable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. Additionally, the long-life permanently lubricated motor bearings need no annual servicing.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions are available at www.upgnet.com or by request.
Noise-reduction features: The upward airflow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolated compressor mounts minimize compressor operating sounds.
IAQ equipment supported: Compatible with a complete line of Coleman IAQ products, including ventilation systems, ultraviolet air treatment systems, electronic and media air cleaners, and whole-house humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This unit uses environmentally friendly R-410A refrigerant with an advanced, all-aluminum microchannel coil for reliability; offers quiet operation and permanently lubricated motor bearings; and its advanced design allows maximum performance in minimum space. Paired with a Coleman furnace or air handler utilizing a high-efficiency blower motor, system performance can reach 16 SEER.
Warranty information: 10-year limited compressors and 10-year limited parts (must be registered online within 90 days of installation — otherwise the parts warranty reverts to a five-year limited parts warranty).
Special installation requirements: TXV is required.
Contact: Johnson Controls, 414-524-4338; www.colemanhvacdealer.com.
eProduct 180
Coleman
Model: D*UQ-24-060 Echelon™ dual-fuel package heat pump
Footprint (in inches): 49 (length) by 47 (width) by 34 or 42 (height)
Serviceability features: This unit has gas/electric service connections on the side or bottom. It is easily converted from horizontal airflow to vertical airflow, has a composite noncorrosive drain pan, and external refrigerant pressure ports. Full perimeter base rails allow for fork or crane lifting. It also features an easy-access electrical and control box and attractive, protective coil louvers.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions are available at www.upgnet.com or by request.
Noise-reduction features: Swept-wing condenser fan. Insulated return and supply sections.
IAQ equipment supported: ASHRAE 62.2 IAQ composite, double sloped drain pan. Foil-backed mold-resistant insulation, painted blower housing and wheel. Optional filter rack with 1-inch filters on single phase. Standard with 1-inch filter rack on three-phase product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This product can be applied on both residential and light commercial applications, and it can easily be applied in the sideflow configuration for residential applications, yet field converted to be applied in the downflow configuration for roof-mounted applications.
Warranty information: 10-year parts and compressor standard (must be registered online within 90 days of installation — otherwise the parts warranty reverts to a five-year limited parts). 20-year gas heat exchanger.
Special installation requirements: There are no special installation requirements for this unit.
Contact: Johnson Controls, 405-419-6557; www.colemanhvacdealer.com.
eProduct 181
Comfort-Aire
Model: HEV Series geothermal heat pump
Footprint (in inches): 22 to 29 (length) by 22 to 25 (width) by 41 to 51 (height)
Serviceability features: Removable panels on three sides enhance accessibility. Performance monitor signals a potential problem so maintenance can be scheduled. Safety features protect the unit from such conditions as high pressure, loss of charge, etc. Digital communication control provides diagnostic data for service calls. If communicating thermostat is not used, a port is built into the unit for an optional diagnostic tool.
Technical support: Experienced service technicians are available to answer questions about installation, operation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives throughout the U.S. and Canada can also provide assistance, and training classes are offered at company headquarters and other cities in the U.S. (fee charged for two-day training).
Technical support materials: Technical documentation includes a comprehensive installation, operation, and maintenance manual with troubleshooting instructions and start-up/checking procedures. The Engineering Design Guide includes specifications, performance data, antifreeze correction charts, and wiring diagrams. These can be viewed or downloaded from the website or emailed upon request. For parts information, contact customer service at 517-787-2100.
Noise-reduction features: Double spring and grommet isolation mounting system for the compressor, plus torsion motor mount reduces vibration and related sound; compressor compartment is insulated and is separated from air handler by insulated divider; discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported: Extra-large air filter is located on the side for handy filter changes. Also with two-stage operation, compressor runs for longer periods of time (mostly at low speed); with less on-off cycling, more air is passing through the filter, helping to improve IAQ.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Integrated digital communication controls link the thermostat, fan motor, and compressor staging, providing set-up and diagnostic data. Among the smallest cabinet sizes in the industry, the HEV is compatible with numerous older models, making it an ideal replacement. With extended range refrigerant circuit, models are capable of ground water, ground loop, and water loop installations.
Warranty information: 10-year compressor and parts, five-year labor allowance; some limitations apply, see printed warranty on website or packed with unit for details. AssurancePlus extended service agreements available; contact ComfortAire representative for details.
Special installation requirements: Can be used for ground water, ground loop, and water loop installations. A modulating valve kit is available for ground water installations to interface with the unit’s controls. Installation instructions are clearly detailed in the IOM manual.
Contact: Heat Controller Inc., 517-787-2100; www.heatcontroller.com.
eProduct 182
Model: VMH30SC ductless mini-split system
Footprint (in inches): Indoor: 57 (length) by 11 (width) by 13 (height)
Serviceability features: Error codes on LED display help diagnose problems. Cover of inside unit is easily removed for access to components; service ports are located on side of outdoor unit to be accessible.
Technical support: Experienced service technicians are available to answer questions about installation, operation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives are also available throughout the U.S. and Canada to provide assistance; their phone numbers are shown on the website under “Where to Buy.”
Technical support materials: Technical documentation includes a comprehensive installation, operation, and maintenance manual and a service manual with wiring diagrams, troubleshooting charts, etc.; a complete parts list is also available. For the consumer, there is an owner’s manual and a remote control manual. These can be viewed or downloaded from the website, or they can be emailed by customer service upon request.
Noise-reduction features: Inverter units operate exceptionally quietly because the dc compressor runs mostly at low RPMs, which minimizes any noise or vibration. The operational sound of the compressor and fan is also kept outside with the condensing unit, while indoor units are built with a high-tech fan that delivers balanced airflow for ultra-quiet operation.
IAQ equipment supported: Multi-stage filtration includes ionizer to remove microscopic particles, active carbon and dust filter, and freshening filter. Both the air filter and the air freshening filter can be removed, cleaned, and reinstalled.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Big capacity, high-wall mount mini-split has the capacity to heat and cool large room; multiple units can be used for exceptionally large spaces. Indoor unit features slim profile and sleek grille with subtle metallic-finish panel. Multiple modes for cooling, heating, dehumidification only, plus sleep and turbo modes, 24-hour timer and auto restart. Low ambient operation allows cooling from 5 to 122˚F; also has crankcase heater and built-in thermostats.
Warranty information: Six-year compressor, two-year parts with product registration; some limitations apply, see printed warranty on website or packed with unit. AssurancePlus extended service agreements are available; details on website or from a Comfort-Aire representative.
Special installation requirements: Power comes from the outdoor unit, so no special wiring or outlet is needed for indoor unit. Installation, operation, and maintenance manual provides detailed installation instructions including location selection. Manual lists maximum line set lengths and maximum elevation which must be followed. Recommended indoor/outdoor connecting cable: 14 AWG/4 conductor 600V THHN unshielded stranded bare copper.
Contact: Heat Controller Inc., 517-787-2100; www.comfort-aire.com.
eProduct 183
Comfortmaker
Model: SoftSound® SXC 2600 air conditioner
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 29 to 47 (height)
Serviceability features: Text-based diagnostics capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. High- and low-pressure switches. Three-piece grille panels are easy to remove separately to view and clean. Easy access service valves on all models. Only two screws to access service panel. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoComfortmaker.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoComfortmaker.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors and isolation compressor grommets to minimize sound at maxi-
mum performance. Compressor sound blanket standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star ratings with selected coil-only combinations in every size. Up to 16.5 SEER efficiency rating. Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Comfortmaker Five-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoComfortmaker.com.
eProduct 184
Model: SoftSound SXT+ air conditioner (CCA7)
Footprint (in inches): 32 to 36 (length) by 36 to 39 (width) by 43 to 51 (height)
Serviceability features: Text-based diagnostics with Observer communicating wall control (TSTAT0101SC). Innovative control box design. Three-piece grille panels are easy to remove separately to view and clean. Easy access to service valves on all models. Only two screws to access control panel. High- and low-pressure switches. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoComfortmaker.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoComfortmaker.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll UltraTech compressors and isolation compressor grommets to minimize sound at maximum performance. High-performance compressor sound shield standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Communicating, self-configuring operation with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen. Provides two-stage comfort. Efficiencies up to 17.5 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Comfortmaker 10-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within 10 years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: TXV expansion devices recommended for maximum system reliability. The units must be installed with a fan coil or furnace capable of supporting two-stage cooling.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoComfortmaker.com.
eProduct 185
Concord
Model: 4HP13 split system heat pump
Footprint (in inches): 25 (length) by 25 (width) by 33 (height)
Serviceability features: Removable louvered panels to access coil. Single-row coil for ease of cleaning. Double and single concentric knockouts for electrical connections. Ground lugs standard. Corner-mounted service valves for easier access.
Technical support: Manufacturer support available Monday through Friday from 8 a.m. to 5 p.m. Eastern time at 800-515-3501. Online support available at www.concord-air.com. YouTube channel: youtube.com/alliedairenterprise.
Technical support materials: Wiring diagram, troubleshooting information, installation data performance, parts and accessories documentation available.
Noise-reduction features: Anti-vibration compressor pads and sound-reducing fan discharge top.
IAQ equipment supported: Compatible with most IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Coil-only dual-fuel ratings available in all sizes. This product is also available in a straight air conditioning configuration.
Warranty information: 10-year compressor and 10-year parts available with online registration.
Special installation requirements: None.
Contact: Allied Air Enterprises, 803-738-4082; www.alliedair.com.
eProduct 186
Daikin AC (Americas) Inc.
Model: FTXS09LVJU/RXS09LVJU
Footprint (in inches): 11 1/4 (length) by 30 1/8 (width) by 21 5/8 (height)
Serviceability features: Built-in self diagnostics with error codes, suitcase style condensing unit cabinet, horizontal air discharge, compact and lightweight. Indoor unit comes with washable filter accessible from the front of the unit.
Technical support: Monday to Friday, 8 a.m. to 5:30 p.m. For more information, visit www.daikinac.com or call 866-432-4546 (866-4DAIKIN). Outside of the U.S., call 972-245-1510.
Technical support materials: Service manual, engineering data book, installation manual, operation manual, submittal data sheets, parts lists, and guide specs.
Noise-reduction features: Additional setback ability.
IAQ equipment supported: Activated by the exposure to natural light, the titanium apatite photo catalytic air purification filter traps microscopic particles, decomposes odors, and deactivates bacteria. This filter lasts for three years with proper maintenance.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: With the ability to program up to four settings per day, the weekly timer allows users to personalize on/off times and temperature settings. Delivering heating and cooling when it is most needed, this feature provides customizable comfort with energy savings. Also equipped with the intelligent eye feature, this function detects movement and automatically changes to an energy-saving mode when movement is not detected for over 20 minutes. Normal operation resumes once movement is detected, ensuring a comfortable experience and offering savings up to 20 percent in cooling and up to 30 percent in heating.
Warranty information: Standard limited warranty includes seven-year compressor, five-year parts, and one-year labor.
Special installation requirements: R-410A certification; factory training is standard. Manufacturer’s installation instructions, service space and piping limitations must be followed as described in the engineering data book, service manual or installation manual.
Contact: Daikin AC (Americas) Inc., 972-245-1510; www.daikinac.com.
eProduct 187
Day & Night
Model: Constant Comfort™ SXC 2600 air conditioner
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 29 to 47 (height)
Serviceability features: Text-based diagnostics capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. High- and low-pressure switches. Three-piece grille panels are easy to remove separately to view and clean. Easy access service valves on all models. Only two screws to access service panel. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoDayandNight.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoDayandNight.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors and isolation compressor grommets to minimize sound at maximum performance. Compressor sound blanket standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star ratings with selected coil-only combinations in every size. Up to 16.5 SEER efficiency rating. Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Day & Night® Five-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoDayandNight.com.
eProduct 188
Model: Constant Comfort™ SXT+ air conditioner (CCA9)
Footprint (in inches): 36 (length) by 39 (width) by 52 (height)
Serviceability features: Text-based diagnostic capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. Three-piece grille panels are easy to remove separately to view and clean. Easy access to service valves on all models. Only two screws to access control panel. High- and low-pressure switches. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoDayandNight.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoDayandNight.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll UltraTech compressors, ECM fan motors, and isolation compressor grommets to minimize sound at maximum performance. High-performance compressor sound shield standard.
IAQ equipment supported: Factory-installed outdoor air temperature sensor. As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault-code messages are viewable on screen. Provides two-stage comfort. Efficiencies up to 19 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Day & Night 10-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within 10 years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: TXV expansion devices recommended for maximum system reliability. The units must be installed with a fan coil or furnace capable of supporting two-stage cooling.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoDayandNight.com.
eProduct 189
Ducane
Model: 4AC14 split system air conditioner
Footprint (in inches): 25 (length) by 25 (width) by 29 (height)
Serviceability features: Removable louvered panels to access coil. Single-row coil for ease of cleaning. Double and single concentric knockouts for electrical connections. Ground lugs standard. Corner-mounted service valves for easier access.
Technical support: Manufacturer support available Monday through Friday from 8 a.m. to 5 p.m. Eastern time at 800-515-3501. Online information available at www.ducanehvac.com. YouTube channel: youtube.com/alliedairenterprise.
Technical support materials: Wiring diagram, troubleshooting information, installation data performance, parts and accessories documentation available.
Noise-reduction features: Anti-vibration compressor pads and sound-reducing fan discharge top.
IAQ equipment supported: Compatible with most IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This product line features coil-only dual-fuel ratings in all sizes.
Warranty information: 10-year compressor and 10-year parts with online registration.
Special installation requirements: None.
Contact: Allied Air Enterprises, 803-738-4082; www.alliedair.com.
eProduct 190
EarthLinked Technologies Inc.
Model: SC, SD, and SW direct geoexchange split system heat pump
Footprint (in inches): 24 (length) by 28 (width) by 25 (height)
Serviceability features: Unit features Adaptiv™ refrigerant flow controls, which make system charging simple. Service valves provided to isolate earth loops from compressor unit. SW model includes on-demand domestic water pre-heating. SD model has internally mounted desuperheater that is pre-plumbed and pre-wired to reduce installation time.
Technical support: Available from 8 a.m. to 5 p.m. Eastern time. Authorized dealers have access to after-hours phone support.
Technical support materials: Application and system selection, installation, and service manuals available on website and hard copy.
Noise-reduction features: Fully insulated cabinet, no outdoor fan.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Direct geoexchange uses highly conductive copper loops to transfer renewable energy from the earth, eliminating the indirect transfer medium found in water loop geo systems.
Warranty information: Five-year compressor and all major components. 20-year earth loops.
Special installation requirements: Sold only through authorized, factory-trained installers.
Contact: EarthLinked Technologies Inc., 863-701-0096; www.earthlinked.com.
eProduct 191
EMI
Model: E-verter split system
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Single or dual point power connections (without electric heat only). Selectable filter indicator notifies occupant when cleaning is required. Condensate pump accessory includes integral safety switch with 48-inch available lift. Internal mount up to 24,000 Btuh. Test mode overrides controls for easy start-up and diagnostics.
Technical support: Available from 7 a.m. to 6 p.m. Eastern time at 315-797-1310.
Technical support materials: Everything is available.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: MERV 11 filter available.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Turbo heat plus two-stage heating with optional electric heat 3:1 turndown increases reliability with less cycling.
Warranty information: Manufacturer did not specify.
Special installation requirements: Manufacturer did not specify.
Contact: ECR International, 210-376-0307; www.e-verter.com.
eProduct 192
First Co.
Model: HXX(-C) ECM split system heat pump/cooling fan coil
Footprint (in inches): 24 (length) by 58 (width) by 11 (height)
Serviceability features: Matching louvered or solid ceiling panels provide complete access to all components. The entire blower assembly can be removed by removing only two screws.
Technical support: Available Monday to Friday from 8 a.m. to 5 p.m. Central time at 214-388-5751, ext. 1166.
Technical support materials: Complete installation instructions are available at www.firstco.com.
Noise-reduction features: The HXX-C (cased) model includes a completely insulated enclosure that simplifies installation and provides additional sound attenuation.
IAQ equipment supported: Optional IAQ ceiling panels with MERV 8 filters are available for all models.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: All HXX models include high-efficiency, high-performance double-shaft ECM motors, which allow these fan coils to match with today’s higher SEER outdoor condensing units and heat pumps for multi-family applications.
Warranty information: One-year parts.
Special installation requirements: All HXX and HXX-C models included factory-installed R-410A TXVs.
Contact: First Co., 214-388-5751; www.firstco.com.
eProduct 193
Fraser-Johnston
Model: D*UQ-24-060 dual-fuel package heat pump
Footprint (in inches): 49 (length) by 47 (width) by 34 or 42 (height)
Serviceability features: This unit has gas/electric service connections on the side or bottom. It is easily converted from horizontal airflow to vertical airflow, has a composite, noncorrosive drain pan, and external refrigerant pressure ports. Full perimeter base rails allow for fork or crane lifting. It also features an easy access electrical and control box and attractive protective coil louvers.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part number and installation instructions are available at www.upgnet.com or see local distributor.
Noise-reduction features: Swept-wing condenser fan. Insulated return and supply sections.
IAQ equipment supported: ASHRAE 62.2 IAQ composite, double-sloped drain pan. Foil-backed mold-resistant insulation, painted blower housing and wheel. Optional filter rack with 1-inch filters on single phase. Standard with 1-inch filter rack on three-phase product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This product can be applied on both residential and light commercial applications, and it can easily be applied in the sideflow configuration for residential applications, yet field converted to be applied in the downflow configuration for roof-mounted applications.
Warranty information: 10-year parts and compressor standard (must be registered online within 90 days of installation — otherwise reverts to five-year limited parts). 20-year gas heat exchanger warranty.
Special installation requirements: There are no special installation requirements.
Contact: Johnson Controls, 405-419-6557; www.fraserjohnston.com.
eProduct 194
Friedrich
Model: SL28N30
Footprint (in inches): 15 (length) by 28 (width) by 20 (height)
Serviceability features: Remote access to maintenance logs, error codes, switches, sensors, and unit data (set points, fan speeds, etc.) with KWIFI accessory and FriedrichLink™ online interface. Built-in firm grip handles and unit’s structural integrity allow it to be removed, cleaned, and maintained outside of its sleeve. Hinged door for filter access.
Technical support: U.S. technical support team available at 877-599-5665 between 8 a.m. and 5 p.m. Central time, Monday through Friday.
Technical support materials: Installation and operation manual; sales brochure.
Noise-reduction features: Steel inner wall and extra dense insulation materials block outdoor noise. Vibration-isolating design and components diminish traditional operating sound levels. Precision engineering maximizes airflow while delivering ultra-quiet operation.
IAQ equipment supported: Optional premium carbon filter, when used in conjunction with the standard antimicrobial air filter, provides superior air filtration, adsorbing odors, ozone, and VOCs for up to a MERV 6 rating. Washable antimicrobial air filter. Check filter reminder. Superior fresh air intake and stale air exhaust.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Wireless control. Compatibility with building management system compatible and smart grid. Can be operated with iPhone, Android, or Blackberry smartphone, tablet, or computer. Group units for zone or centralized control with room air conditioners. Features seven-day programmability, remote access to diagnostics, and optional carbon filtration.
Warranty information: One-year parts. Within 60 months of purchase, Friedrich pays a labor allowance and parts necessary to repair the sealed refrigeration system.
Special installation requirements: Manufacturer did not specify.
Contact: Friedrich Air Conditioning; www.friedrich.com.
eProduct 195
Frigidaire
Model: B6VMAX air handler
Footprint (in inches): 22 (length) by 20 (width) by 43 (height)
Serviceability features: Breaker accessible from the front of the unit when heater kit is applied. Heater kits are plug-in and are available in 5 through 30 kW sizes. Built-in filter rack is standard for ease of service.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com. Installation instructions, wiring diagrams, replacement parts lists, and technical data specifications all available.
Noise-reduction features: 1-inch insulation with an R value of 4.2.
IAQ equipment supported: UV lights, zoning, electronic air cleaner, HEPA air cleaner, twinning.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Anteater coil technology with zinc additives to stop formicary corrosion.
Warranty information: 10-year parts with matching outdoor equipment, product registration required.
Special installation requirements: Manufacturer did not specify.
Contact: Frigidaire; www.frigidaire.net.
eProduct 196
Model: iQ Drive FT4BG split system heat pump
Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, and external common suction port.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept-wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests, perfect fix media filter for air handler applications, as well as electronic air cleaners.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor, in a ducted system, from a two-stage heat pump thermostat.
Warranty information: 10-year parts with registration and a 10-year Quality Pledge to replace the unit if the compressor fails.
Special installation requirements: None.
Contact: Frigidaire; www.frigidaire.net.
eProduct 197
GeoComfort
Model: Compass Series GRT geothermal outdoor unit
Footprint (in inches): 29 (length) by 32 (width) by 23 (height)
Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Back-seating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.
Technical support: Full technical service support with 24-hour phone access.
Technical support materials: Full technical literature supplied with each unit, including service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.
IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Retrofit installations are simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.
Warranty information: Standard: five-year labor allowance (second to fifth years, dealer warrants first year), five-year parts, five-year refrigerant circuit, 10-year compressor (parts only years 6 to 10), 90-day DOA labor allowance at dealer street rate. Optional extended warranty: 10-year labor allowance (second to tenth years; dealer warrants first year), 10-year parts, 10-year refrigerant circuit, 10-year compressor warranty (parts only years 6 to 10), 90-day DOA labor allowance at dealer street rate. Optional lifetime compressor warranty.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 198
Model: Compass Series GST split system geothermal heat pump
Footprint (in inches): 31 (length) by 28 (width) by 23 (height)
Serviceability features: Access doors on all sides with easy access to all components. All digital controls with individual LED fault lights. Brass service valves for easy installation of the air handler or A-coil.
Technical support: Full technical service support with 24-hour phone access.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet lined with recycled blue-jean insulation. Rubber grommet compressor isolation.
IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: A versatile product line that makes installation in tight spaces or retrofit installations easy. The unit is matched with optional air handlers or uncased A coils for dual-fuel applications.
Warranty information: Standard: five-year labor allowance (second to fifth years; dealer warrants first year), five-year parts, five-year refrigerant circuit, 10-year compressor (parts only years 6-10), 90-day DOA labor allowance at dealer street rate. Optional extended warranty: 10-year labor allowance (second to tenth years, dealer warrants first year), 10-year parts, 10-year refrigerant circuit, 10-year compressor (parts only years 6 to 10), 90-day DOA labor allowance at dealer street rate. Optional lifetime compressor warranty.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 199
Goodman
Model: GPD14 dual-fuel package heat pump
Footprint (in inches): 51 (length) by 47 (width) by 35 (height)
Serviceability features: Convenient access panels, one roof curb fits all units, brass service valves, loss of charge protection, safety circuits complete with self-diagnostics, and fits into a standard-size pick-up truck.
Technical support: Full technical support is available from local distributor or toll free at 888-593-9988.
Technical support materials: Available from local distributor, toll free at 888-593-9988, or online at www.goodmanmfg.com, PartnerLink, and SmartContractor™ mobile application.
Noise-reduction features: Scroll compressor, EEM motor, fully insulated heavy-gauge cabinet, and direct-spark ignition.
IAQ equipment supported: Supports all IAQ products compatible with a package product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This is a dual-fuel unit combining cooling with heat pump and gas heating performance, unique tubular heat exchanger constructed of T-140 aluminized steel, loss of charge protection.
Warranty information: 20-year heat exchanger limited, 10-year parts limited.
Special installation requirements: No special installation requirements.
Contact: Goodman Global Inc., 713-263-5064; www.goodmanmfg.com.
eProduct 200
Model: MS20 mini-split air conditioner
Footprint (in inches): 29 (length) by 12 (width) by 23 (height)
Serviceability features: Contains a wide array of serviceability features including brass service valves, easy-to-access compressor, and easy-to-clean air filters.
Technical support: Full technical support is available from local distributor or toll free at 888-593-9988.
Technical support materials: Available from local distributor or online at www.goodmanmfg.com or via PartnerLink.
Noise-reduction features: A three-speed fan motor coupled with bi-directional airflow ensures low operational noise.
IAQ equipment supported: Features an odor capture carbon filter, remote control antibacterial fan, and does not require additional IAQ components for optimum performance.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: DC inverter technology compressor, follow-me remote control for unit, turbo fan control settings, chlorine-free R-410A refrigerant.
Warranty information: Five-year compressor limited and one-year parts limited. Qualifies for extended service agreement programs.
Special installation requirements: None.
Contact: Goodman Global Inc., 713-263-5064; www.goodmanmfg.com.
eProduct 201
Halcyon
Model: System 9RLS2 split system
Footprint (in inches): 7 (length) by 34 (width) by 11 (height)
Serviceability features: LED lights up when the unit needs to be cleaned. This occurs after about 400 hours of use.
Technical support: Available at 866-952-8324 from 8 a.m. to 8 p.m. Eastern time.
Technical support materials: Online Dealer Toolbox includes operation, service, and installation manuals; design and technical manuals; blow-apart parts diagrams; interactive troubleshooting guides; a Btu load calculator; and a variety of additional technical information and drawings.
Noise-reduction features: Features an indoor unit as quiet as 21 dB. The outdoor unit is 48 dB.
IAQ equipment supported: The Apple Catechin filter absorbs dust, mold spores, and microorganisms by static electricity and inhibits growth. The life expectancy is 3 to 12 months, depending on environment. The ion deodorizing filter decomposes absorbed odors using the oxidizing effects of ions. Three-year life expectancy. Wash to restore surface action.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Efficient heat pump with a SEER of 27.2. It features powerful heating at outdoor temperatures down to -5˚F, an energy-saving program (ESP) that senses movement in the room and adjusts the temperature accordingly, a programmable remote control, inverter technology, and quiet operation.
Warranty information: Five-year parts and seven-year compressor.
Special installation requirements: None.
Contact: Fujitsu General America, 973-287-1645; www.fujitsugeneral.com.
eProduct 202
Heil
Model: QuietComfort® DXC 1600 air conditioner
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 29 to 47 (height)
Serviceability features: Text-based diagnostics capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. High- and low-pressure switches. Three-piece grille panels are easy to remove separately to view and clean. Easy-access service valves on all models. Only two screws to access service panel. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoHeil.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoHeil.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors and isolation compressor grommets to minimize sound at maximum performance. Compressor sound blanket standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star ratings with selected coil-only combinations in every size. Up to 16.5 SEER efficiency rating. Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Heil Five-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoHeil.com.
eProduct 203
Model: QuietComfort DXT+ air conditioner (HCA7)
Footprint (in inches): 32 to 36 (length) by 36 to 39 (width) by 43 to 51 (height)
Serviceability features: Text-based diagnostics with Observer communicating wall control (TSTAT0101SC). Innovative control box design. Three-piece grille panels are easy to remove separately to view and clean. Easy access to service valves on all models. Only two screws to access control panel. High- and low-pressure switches. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoHeil.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoHeil.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll UltraTech compressors and isolation compressor grommets to minimize sound at maximum performance. High-performance compressor sound shield standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Communicating, self-configuring operation with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen. Provides two-stage comfort. Efficiencies up to 17.5 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Heil 10-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within 10 years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: TXV expansion devices recommended for maximum system reliability. The units must be installed with a fan coil or furnace capable of supporting two-stage cooling.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoHeil.com.
eProduct 204
Hydron Module
Model: Revolution Series HRT geothermal outdoor unit
Footprint (in inches): 29 (length) by 32 (width) by 23 (height)
Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Back-seating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.
Technical support: Full technical service support with 24-hour phone access.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.
IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Makes retrofit installations simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.
Warranty information: Standard: 10-year labor allowance (second to tenth years, dealer warrants first year), 10-year parts, 10-year refrigerant circuit, lifetime compressor, cabinet, and heat exchanger (original owner), 90-day DOA labor allowance at dealer street rate. Optional lower warranties.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 205
Model: Revolution Series HST split system geothermal heat pump
Footprint (in inches): 31 (length) by 28 (width) by 23 (height)
Serviceability features: Access doors on all sides with easy access to all components. All digital controls with individual LED fault lights. Brass service valves for easy installation of the air handler or A coil.
Technical support: Full technical service support with 24-hour phone access.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet lined with recycled blue-jean insulation. Rubber grommet compressor isolation.
IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: A versatile product line that makes installation in tight spaces, or retrofit installations easy. The unit is matched with optional air handlers or uncased A coils for dual-fuel applications.
Warranty information: Standard: 10-year labor allowance (second to tenth years; dealer warrants first year), 10-year parts, 10-year refrigerant circuit, lifetime compressor, cabinet, and heat exchanger (original owner), 90-day DOA labor allowance at dealer street rate. Optional lower warranties.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 206
Lennox
Model: 14ACX-059 split system
Footprint (in inches): 32 (length) by 32 (width) by 37 (height)
Serviceability features: Louvered heavy gauge steel panels surround unit on all sides to prevent damage to the coil. Fully serviceable brass service valves prevent corrosion and provide access to refrigerant system. Suction valve can be fully shut off, while liquid valve may be front seated to manage refrigerant charge while servicing system.
Technical support: Installation, service, or application questions can be answered at 800-453-6669 (800-4-LENNOX).
Technical support materials: Product specifications, wiring diagrams, installation instructions, and service manuals are all available at www.lennoxdavenet.com.
Noise-reduction features: Vibration-isolated compressor mount and available compressor sound cover.
IAQ equipment supported: Compatible with the complete line of Healthy Climate IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: High-efficiency 5 ton air conditioning unit with performance up to 16 SEER and 13 EER while maintaining a competitive capacity of up to 58,000 Btuh. Louvered heavy-gauge steel cabinet for maximum durability.
Warranty information: Five-year parts and compressor limited, can be registered online to 10 years.
Special installation requirements: Must be installed in an AHRI matched system. Most matches require a TXV.
Contact: Lennox Industries, 214-379-3709; www.lennox.com/residential.
eProduct 207
Model: MS7 ductless mini-split air conditioner and heat pump
Footprint (in inches): 36 (length) by 17 (width) by 31 (height)
Serviceability features: Offers many benefits, including easy-to-read-and-understand guides to ensure proper installations. Trained technical support and field technical consultants are available to help dealers with questions. Lennox stocks available repair parts and installation supplies at local Lennox PartsPlus locations and warehouses.
Technical support: Available at 800-453-6669 (800-4-LENNOX).
Technical support materials: Installation instructions, service/troubleshooting guides, wiring diagrams, parts breakdowns with part number, engineering specification sheets, and technical data sheets are all available.
Noise-reduction features: Offers very low sound levels. Inverter technology modulates the compressor and the fan to use minimal energy to achieve required comfort levels, all while keeping sound to a minimum.
IAQ equipment supported: Comes with a factory-installed washable filter to help filter out airborne particulates.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The mini-split is a fully supported Lennox product, with a commitment to dealers that Lennox will have repair parts, training, and technical support from qualified employees.
Warranty information: Five-year parts, five-year compressors. CompleteCare+ extended warranty is available for this product.
Special installation requirements: Manufacturer did not specify.
Contact: Lennox Industries, 214-379-3709; www.lennox.com/residential/.
eProduct 208
LG Electronics USA
Model: LMAN096HVT ductless heat pump multi-zone system
Footprint (in inches): 35 (length) by 8 (width) by 11 (height)
Serviceability features: LG software analysis tool diagnoses service issues in field, easy access to clean coils, easy to remove covers for access to key components.
Technical support: Available at 888-865-3026, from 7 a.m. to 7 p.m. Central time, Monday to Friday.
Technical support materials: Website support available at www.lg-dfs.com for wiring diagrams, service/troubleshooting information, and installation data. Distribution support for contractor parts, information and parts availability at http://gsfs-america.lge.com.
Noise-reduction features: Compressor insulation, inverter variable-speed compressor, inverter fans.
IAQ equipment supported: Includes plasma air purification system for advanced IAQ.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The sleek and modern style of this mirror-finish indoor unit is a refreshing change from the plastic look of other products. The Jet Cool feature provides quick cooling. The inverter compressor has low amp draw, and auto restart allows the unit to resume operation in the same mode after a power interruption.
Warranty information: Two-year parts, five-year compressor.
Special installation requirements: Improvements in design allow 45 percent greater space behind the unit for ease of installation. An integral unit stand allows the unit to be held in place (away from wall) for ease of installation.
Contact: LG Electronics USA, 312-397-6064; www.LGHVAC.com.
eProduct 209
Luxaire
Model: Climasure™ Series TCGF air conditioner
Footprint (in inches): 29 (length) by 29 (width) by 28 (height)
Serviceability features: This unit has easy service access with fully exposed refrigerant connections and a single panel covering the electrical controls. Secured reusable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. Additionally, the long-life, permanently lubricated motor bearings need no annual servicing.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions, including wiring diagrams, sizes, parts, accessories, part number and installation instructions, are available at www.upgnet.com or by request.
Noise-reduction features: The upward airflow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolated compressor mounts minimize compressor operating sounds.
IAQ equipment supported: Compatible with a complete line of Luxaire IAQ products, including ventilation systems, ultraviolet air treatment systems, electronic and media air cleaners, and whole-house humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This unit uses environmentally friendly R-410A refrigerant with an advanced, all-aluminum microchannel coil for reliability, offers quiet operation, permanently lubricated motor bearings, and an advanced design allows maximum performance in minimum space. Paired with a Luxaire furnace or air handler utilizing a high-efficiency blower motor, system performance can reach 16 SEER.
Warranty information: 10-year limited compressors, 10-year limited parts (must be registered online within 90 days of installation — otherwise the parts warranty reverts to a five-year limited parts warranty).
Special installation requirements: TXV is required.
Contact: Johnson Controls, 414-524-4338; www.joinluxaire.com.
eProduct 210
Model: D*UQ-24-060 Acclimate™ dual-fuel package heat pump
Footprint (in inches): 49 (length) by 47 (width) by 34 or 42 (height)
Serviceability features: This unit has gas/electric service connections on the side or bottom. It is easily converted from horizontal airflow to vertical airflow, has a composite, noncorrosive drain pan, and external refrigerant pressure ports. Full perimeter base rails allow for fork or crane lifting. It also features an easy-access electrical and control box and attractive, protective coil louvers.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part number and installation instructions, are available at www.upgnet.com or by request.
Noise-reduction features: Swept-wing condenser fan. Insulated return and supply sections.
IAQ equipment supported: ASHRAE 62.2 IAQ composite, double-sloped drain pan. Foil-backed mold-resistant insulation, painted blower housing and wheel. Optional filter rack with 1-inch filters on single phase. Standard with 1-inch filter rack on three-phase product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This product can be applied on both residential and light commercial applications and can easily be applied in the side flow configuration for residential applications, yet field converted to be applied in the downflow configuration for roof-mounted applications.
Warranty information: 10-year parts and compressor standard (must be registered online within 90 days of installation, otherwise parts warranty reverts to 5-year limited). 20-year gas heat exchanger.
Special installation requirements: None.
Contact: Johnson Controls, 405-419-6557; www.joinluxaire.com/.
eProduct 211
Maytag
Model: iQ Drive PPG2GI package gas/electric unit
Footprint (in inches): Up to 64 (length) by 47 (width) by 47 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, electronic expansion valve, and external service ports.
Technical support: Call 866-262-9824 (866-2-MAYTAG) from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system, from a two-stage thermostat.
Warranty information: 12-year parts with registration and a 12-year Dependability Promise to replace the unit if the compressor or heat exchanger fails.
Special installation requirements: None.
Contact: Maytag; www.maytaghvac.com.
eProduct 212
Model: iQ Drive PSH4BG split system heat pump
Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, and external common suction port.
Technical support: Call 866-262-9824 (866-2-MAYTAG) from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests, perfect fix media filter for air handler applications, as well as electronic air cleaners.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter-driven compressor in a ducted system from a two-stage heat pump thermostat.
Warranty information: 12-year parts with registration and a 12-year Dependability Promise to replace the unit if the compressor fails.
Special installation requirements: None.
Contact: Maytag; www.maytaghvac.com.
eProduct 213
Mitsubishi Electric Cooling & Heating
Model: Ceiling-recessed system, SLZ-KA12NA (indoor) and SUZ (outdoor)
Footprint (in inches): 22 (length) by 22 (width) by 9 (height)
Serviceability features: Complete built-in self-diagnostics direct a technician to a specific issue; washable filters speed up routine maintenance; reliable system components mean worry-free maintenance issues. Access panel for servicing in hard ceiling installations; built-in drain-life mechanism for condensate removal
Technical support: Available at 877-391-5550 from 8 a.m. to 7 p.m. Eastern time.
Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets are available at www.mitsubishipro.com. Systems install quickly and easily, with no need for major construction and remodeling. This simple and flexible installation saves contractors time and money.
Noise-reduction features: The indoor unit features a variable-speed turbo fan that delivers air effectively and quietly. The outdoor unit features a sealed insulated compressor compartment, vibration dampening techniques and the inverter compressor and fan unit typically run at partial speed for lower sound levels.
IAQ equipment supported: The SLZ units contain long air outlets that deliver wide airstreams for excellent air distribution and energy savings, quieter functionality, and more effective overall cooling and heating coverage. Washable, long-life anti-allergen features improve air quality, with the ability to wash rather than replace the filter. A 4-inch ventilation-air knockout is optional.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The SLZ units can be connected to MXZ-series multi-zone outdoor units and SUZ outdoor units. The units can also be installed in remodeled spaces, like basements, that might have drop ceilings. The systems offer a wide air-flow pattern to offer better air distribution for customers and are compatible with the MHK1 RedLINK controller.
Warranty information: Seven-year compressor, five-year parts.
Special installation requirements: None.
Contact: Mitsubishi Electric Cooling & Heating, 202-625-2515; www.mitsubishipro.com.
eProduct 214
Model: Floor-mounted system, MFZ-KA12NA (indoor) and MXZ-2B20NA-1 (outdoor)
Footprint (in inches): 8 (length) by 28 (width) by 24 (height)
Serviceability features: These models provide conditioned air from two vents as well as direct front-panel access to the filter for easy cleaning. Complete built-in self-diagnostics direct a technician to a specific issue; washable filters speed up routine maintenance; reliable system components mean worry-free maintenance issues.
Technical support: Available at 877-391-5550 from 8 a.m. to 7 p.m. Eastern time.
Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets are available at www.mitsubishipro.com. Systems install quickly and easily, with no need for major construction or remodeling. This simple and flexible installation saves contractors time and money.
Noise-reduction features: The indoor unit features a linear Sirocco-style blower wheel to maximize air volume and velocity while minimizing air noise. Sound pressure level in the cooling cycle is 41-36-31-26 dBa and 41-36-31-28 dBa in the heating cycle. The outdoor unit features a sealed insulated compressor compartment, vibration dampening techniques and the inverter compressor and fan unit typically run at partial speed for lower sound levels.
IAQ equipment supported: System includes washable, long-life anti-allergen filters to improve air quality.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The MFZ connects to the MXZ-B Series multi-zone outdoor units. A perfect fit for rooms that have difficult temperature control needs such as sunrooms, finished attics with knee walls, and basements, MFZ indoor units provide energy-efficient solutions for small rooms that may not have usable wall space. Additionally, the units can be recessed into walls to maximize floor space.
Warranty information: Seven-year compressor, five-year parts.
Special installation requirements: None.
Contact: Mitsubishi Electric Cooling & Heating, 202-625-2515; www.MitsubishiPro.com.
eProduct 215
NuTone
Model: B6EMMX air handler
Footprint (in inches): 22 (length) by 20 (width) by 43 (height)
Serviceability features: Breaker accessible from the front of the unit when heater kit is applied. Heater kits are plug-in and are available in 5 through 30 kW sizes. Built-in filter rack is standard for ease of service.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com. Installation instructions, wiring diagrams, replacement parts lists, and technical data specifications all available.
Noise-reduction features: 1-inch insulation with an R value of 4.2.
IAQ equipment supported: UV lights, zoning, electronic air cleaner, HEPA air cleaner, twinning.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: All aluminum microchannel Anteater MC coil technology provides high corrosion resistance.
Warranty information: 10-year parts with matching outdoor equipment, product registration required.
Special installation requirements: Manufacturer did not specify.
Contact: NuTone; www.nutonehvac.com.
eProduct 216
Model: iQ Drive R6GI package gas/electric unit
Footprint (in inches): Up to 64 (length) by 47 (width) by 47 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, electronic expansion valve, and external service ports.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system from a two-stage thermostat.
Warranty information: 10-year parts with registration and a 10-year Quality Pledge to replace the unit if the compressor or heat exchanger fails.
Special installation requirements: None.
Contact: NuTone; www.nutonehvac.com.
eProduct 217
Panasonic
Model: E9NKUA ductless split system heat pump
Footprint (in inches): 8 (length) by 34 (width) by 12 (height)
Serviceability features: Manufacturer did not specify.
Technical support: Available at 800-851-1235 or via email: hvac.service@us.panasonic.com.
Technical support materials: Available at www.panasonic.com/aircon.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Sleek and stylish design with highly efficient inverter control. Standard Blue Fin condenser provides protection up to three times longer than standard condensers.
Warranty information: 7-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Panasonic Air Conditioning Group, 678-905-3078; www.panasonic.com/aircon.
eProduct 218
Model: U-72MF1U9 ECOi VRF system heat recovery unit
Footprint (in inches): 35 (length) by 35 (width) by 82 (height)
Serviceability features: Systems have a self-diagnostic auto check function to provide alert of alarm conditions. A web-based controller is available that controls up to 256 indoor units and can notify alarm conditions via email.
Technical support: Available at 800-851-1235.
Technical support materials: Technical data manuals, service manuals, installation manuals, submittal data, guide specifications, etc.
Noise-reduction features: Inverter-driven compressor, variable-speed dc fan motor.
IAQ equipment supported: Energy recovery ventilator, high-efficiency air filters.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: One outdoor unit connects as many as 16 indoor units. Up to 40 indoor units can be connected on larger systems with multiple outdoor units.
Warranty information: One-year parts, six-year compressor.
Special installation requirements: Installation classes are offered free of charge online or at company training facility.
Contact: Panasonic Air Conditioning Group, 678-810-1198; http://shop.panasonic.com/hvac/.
eProduct 219
Payne
Model: PA17NA two-stage air conditioner
Footprint (in inches): 32 to 36 (length) by 35 to 39 (width) by 43 to 47 (height)
Serviceability features: One access panel provides access to all electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.
Technical support: Support provided through nationwide network of local distributors.
Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, wiring diagram.
Noise-reduction features: Specially designed fan blades reduce noise associated with turbulent air movement. Rubberized isolation pads create a buffer between the base pan and the compressor to minimize noise from vibrations. Two-stage compressor operates at quieter, lower speeds most of the time.
IAQ equipment supported: As part of an installed system, compatible with air purifier, humidifiers, ventilators, germicidal UV lamps, and other IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Offers energy-saving performance up to 17.2 SEER and up to 13.5 EER with the extra-comfort features of a two-stage compressor and two-speed fan motor in a system that’s easy to install and service.
Warranty information: 10-year parts limited (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details).
Special installation requirements: None.
Contact: Payne, 888-41PAYNE; www.payne.com.
eProduct 220
Pridiom
Model: Multi-Zone Versatile Match Systems ductless heat pumps
Footprint (in inches): 33 (length) by 13 (width) by 39 (height)
Serviceability features: Multi-zone systems allow for condenser to operate with one to four indoor units.
Technical support: Available at 855-774-3466 for installation, service, troubleshooting, and basic questions or at support@pridiom.com.
Technical support materials: Wiring diagrams, service, troubleshooting, installation, parts, part numbers, etc.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Includes air filtration and hydrophilic coating to inhibit the growth of mold, mildew, bacteria, etc.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: These systems can run with as little as one indoor unit or up to three or four, depending on the condenser. They come with the best warranty and technical support in the industry as well.
Warranty information: Five-year compressor, three-year parts, one-year limited labor.
Special installation requirements: Manufacturer did not specify.
Contact: Pridiom Group, 855-774-3466; www.pridiom.com.
eProduct 221
Model: PMS121HX solar ductless heat pump
Footprint (in inches): 30 (length) by 11 (width) by 23 (height)
Serviceability features: This unit is a grid-tied, solar-assisted heat pump. When operated without any solar panels it works as a standard inverter unit with a SEER rating of 20, but with maximum solar input it can reach SEER levels as high as 139.
Technical support: Available at 855-774-3466 (855-PRIDIOM) or at support@pridiom.com.
Technical support materials: Wiring diagrams, technical service, troubleshooting, installation assistance, etc., is available at 855-774-3466 (855-PRIDIOM) or at support@pridiom.com.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: This system includes a filtration system to catch airborne particulates and has a hydrophilic coating to help shed water to reduce the possibility of mold, mildew, bacteria growth, etc.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: Stocked, readily available solar-powered system that has solar energy powering the operation of the system and has technical support/service via phone or Internet located in the U.S.
Warranty information: Five-year compressor, three-year parts, one-year limited labor.
Special installation requirements: Manufacturer did not specify.
Contact: Pridiom Group, 855-774-3466; www.pridiom.com.
eProduct 222
Rheem
Model: Value Series, 16AJL condensing unit
Footprint (in inches): 32 (length) by 32 (width) by 27-35 (height)
Serviceability features: Features 10 easy-to-read diagnostic codes, which alert the technician to the source of the service call. These diagnostic codes greatly improve the technician’s accuracy and reduce repair times.
Technical support: Available at 479-648-6237, Monday through Friday, from 8 a.m. to 5 p.m., Central time, or at www.rheem.com for more information, such as FAQs, literature, spec sheets, etc.
Technical support materials: Specification sheets, wiring diagrams, accessory sheets, installation instructions, use and care sheets, warranty information, parts lists, and submittal sheets. Also available at www.rheem.com and Rheem’s Apple iPad app®. They can also be viewed on a smartphone and an Apple iPad.
Noise-reduction features: Features an attractive, louvered wrap-around jacket, which facilitates a quiet operation and protects the coil from yard hazards and weather extremes.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This condensing unit fits the budget and lifestyle of any homeowner and arms the contractor with a 16-SEER replacement option that includes Rheem’s standard humidity control features and smart diagnostic capabilities — at efficiency levels and a price point consumers can handle.
Warranty information: 10-year compressor; 10-year parts; and limited lifetime for unit replacement with registration.
Special installation requirements: None.
Contact: Rheem, 469-387-0522; www.rheem.com.
eProduct 223
Model: RHML Series air handler
Footprint (in inches): 22 (length) by 21 to 25 (width) by 43 to 56 (height)
Serviceability features: This air handler has one of the smallest overall profiles in the industry and has been engineered to aid contractors in serviceability. It features an easy-access panel so contractors can remove one service panel and access the blower, which houses the controls, motor, and blower.
Technical support: Available at 479-648-6237, Monday through Friday, from 8 a.m. to 5 p.m., Central time, or at www.rheem.com for more information, such as FAQs, literature, spec sheets, etc.
Technical support materials: Specification sheets, wiring diagrams, accessory sheets, installation instructions, use and care sheets, warranty information, parts lists, and submittal sheets. Also available at www.rheem.com and Rheem’s Apple iPad app®. They can also be viewed on a smartphone and an Apple iPad.
Noise-reduction features: This unit features a sturdy cabinet construction with a 1-inch layer of reinforced foil-faced jacket insulation, which helps reduce noise while also providing excellent thermal insulation.
IAQ equipment supported: Compatible with Rheem’s full suite of IAQ products, including media air cleaners, dehumidification systems, electronic air cleaners, bypass humidifiers, steam humidifiers, and ultraviolet treatment systems.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: These air handlers fit the budget and lifestyle of any homeowner and pair perfectly with the new Rheem Value Series 16AJL condensing units. The combined system gives contractors an advanced and efficient residential cooling solution — at a price point consumers can handle.
Warranty information: 10-year conditional parts, with registration.
Special installation requirements: None.
Contact: Rheem, 469-387-0522; www.rheem.com.
eProduct 224
Roth
Model: TerraStar RXT geothermal heat pump
Footprint (in inches): 32 (length) by 30 (width) by 60 (height)
Serviceability features: Access doors on all sides with easy access to all components. The control box is top mounted at eye-level for wiring and access to LED fault lights. TXV and filter-drier are mounted in the air handler section for additional access.
Technical support: Full technical service support available.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet lined with closed-cell foam insulation. Quadruple compressor isolation insulates the compressor from the cabinet.
IAQ equipment supported: Compatible with most 24-v air cleaners and other IAQ products. The variable-speed ECM blower is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The first packaged HVAC product in the industry to utilize an all-aluminum microchannel air coil as both a condenser and evaporator. This innovation solves the age-old industry issue of air coil failure due to formicary corrosion. The microchannel coil is also lighter and more efficient.
Warranty information: Manufacturer did not specify.
Special installation requirements: Manufacturer did not specify.
Contact: Roth North America, 315-579-3338; www.roth-usa.com.
eProduct 225
Ruud
Model: RHML Series air handler
Footprint (in inches): 22 (length) by 21 to 25 (width) by 43 to 56 (height)
Serviceability features: These air handlers have one of the smallest overall profiles in the industry and have been engineered to aid contractors in serviceability. They feature an easy-access panel so contractors can remove one service panel and access the blower, which houses the controls, motor and blower.
Technical support: Available at 479-648-6237, Monday through Friday, from 8 a.m. to 5 p.m., Central time, or at www.Ruud.com for more information, such as FAQs, literature, spec sheets, etc.
Technical support materials: Specification sheets, wiring diagrams, accessory sheets, installation instructions, use and care sheets, warranty information, parts lists, and submittal sheets. Contractors can access these documents via www.Ruud.com, and they can also be viewed on a smartphone and an Apple iPad.
Noise-reduction features: This unit features a sturdy cabinet construction with a 1-inch layer of reinforced foil-faced jacket insulation, which helps reduce noise while also providing excellent thermal insulation.
IAQ equipment supported: This series of air handlers is compatible with Ruud’s line of IAQ products, including media air cleaners, dehumidification systems, electronic air cleaners, bypass humidifiers, steam humidifiers, and ultraviolet treatment systems.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The new RHML Series of air handlers pairs perfectly with the new Ruud Value Series 16AJL condensing units. The combined system gives contractors a durable and efficient residential cooling solution — at a price point consumers can handle.
Warranty information: 10-year conditional on all parts, with registration.
Special installation requirements: None.
Contact: Ruud, 469-387-0522; www.ruud.com.
eProduct 226
Model: Value Series, 16AJL condensing unit
Footprint (in inches): 32 (length) by 32 (width) by 27-35 (height)
Serviceability features: Condensing unit features straightforward diagnostic codes, which alert the technician to the source of the service call. These diagnostic codes help improve the technician’s accuracy and reduce repair times.
Technical support: Available at 479-648-6237, Monday through Friday, from 8 a.m. to 5 p.m., Central time, and at www.Ruud.com for more information, such as FAQs, literature, spec sheets, etc.
Technical support materials: Specification sheets, wiring diagrams, accessory sheets, installation instructions, use and care sheets, warranty information, parts lists, and submittal sheets. Contractors can access these documents at www.Ruud.com, and they can also be viewed on a smartphone and an Apple iPad.
Noise-reduction features: Condensing unit features a durable, louvered wrap-around jacket, which facilitates a quiet operation and protects the coil from yard hazards and weather extremes.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The new condensing unit is a reliable and efficient product that leverages standard humidity control features and diagnostic capabilities. The condensing unit provides contractors with a durable product at a price point that meets the needs of today’s homeowner — making it an attractive replacement option.
Warranty information: 10-year compressor; 10-year parts; and Ruud offers a limited lifetime unit replacement with registration.
Special installation requirements: None.
Contact: Ruud, 469-387-0522; www.ruud.com.
eProduct 227
Samsung
Model: Vivace AQV12VBE heat pump
Footprint (in inches): 8 (length) by 32 (width) by 11 (height)
Serviceability features: Designed to be simple to install and easy to service. Flared connections and precharged for a 25-foot line set, make for a relatively quick installation. Samsung’s reputation for quality design and workmanship is showcased by this fully featured model of mini split.
Technical support: Available at 866-243-6498 from 8 a.m. Eastern time to 5 p.m. Pacific time.
Technical support materials: Installation, operator, and service manuals are immediately available for download from www.quietside.com.
Noise-reduction features: Some of the lowest decibel ratings for both indoor and outdoor units in the market today.
IAQ equipment supported: Exclusive to the series is the MPI generator, which actively removes mold, bacteria, airborne viruses, dust, and other allergens. In addition, the evaporator coil is coated with a silver nano coating, which further reduces the amount of contaminants in the exhaust air making for a fresh healthy environment.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The “virus doctor” MPI generator is an active air purification device that removes debris from the room in which it is installed.
Warranty information: Five-year compressor, three-year parts, and 120-day limited labor.
Special installation requirements: Standard mini-split insulated line set with 14-3 power line and 16-2 shielded communication line.
Contact: Quietside Corp., 717-243-2535; quietside.com.
eProduct 228
SpacePak
Model: Aircell air handler
Footprint (in inches): 36 (length) by 24 (width) by 10 (height)
Serviceability features: Completely modular unit, easily serviced on site, or simply removed for component replacement. Lightweight (27 pounds). Single-person installation. Quick connect water connections with ball valve. Plugs into 110-v outlet, no hard wire required. Kwik connect duct fittings for easy install and removal.
Technical support: Available at 413-564-5530, 8 a.m. to 5 p.m. Eastern time, Monday to Friday.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Low noise EC fan motor, sound attenuation on each duct run.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: EC fan motor technology, heating/cooling, lightweight, fresh air capability, two zones per module, no plenum required, control platform — hard wired or smartphone/PC app enabled.
Warranty information: Five-year provided to all certified installers.
Special installation requirements: None.
Contact: SpacePak, 413-265-0477; www.SpacePak.com.
eProduct 229
Model: Chiller Series reverse cycle chiller
Footprint (in inches): 44 (length) by 18 (width) by 53 (height)
Serviceability features: Two completely separate refrigeration circuits, factory precharged, totally self-contained advanced Corel controller, remote mount up to 300 feet away. Horizontal discharge allows for installation under decks. Low ambient antifreeze protection built in.
Technical support: Available at 413-564-5530 from 8 a.m. to 5 p.m. Eastern time, Monday to Friday.
Technical support materials: IOMs, submittal wiring diagrams.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: Dual programmable compressor, simple piping and pumping. Easily zoned. 30 percent larger condenser coil than traditional units. Self-diagnostic control. Factory programmed low amp requirements for quiet operation. Soft-start package standard. No refrigerant handling. High R-410A COP and EER.
Warranty information: Five years for certified installers.
Special installation requirements: None.
Contact: SpacePak, 413-265-0477; www.spacepak.com.
eProduct 230
Tappan
Model: B6EMMX air handler
Footprint (in inches): 22 (length) by 20 (width) by 43 (height)
Serviceability features: Breaker accessible from the front of the unit when heater kit is applied. Heater kits are plug-in and are available in 5 through 30 kW sizes. Built-in filter rack is standard for ease of service.
Technical support: Call 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: 1-inch insulation with an R value of 4.2.
IAQ equipment supported: UV lights, zoning, electronic air cleaner, HEPA air cleaner, twinning.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: All aluminum microchannel Anteater MC coil technology provides high corrosion resistance.
Warranty information: 10-year parts with matching outdoor equipment, product registration required.
Special installation requirements: Manufacturer did not specify.
Contact: Tappan; www.tappan.net.
eProduct 231
Model: iQ Drive R6GI package gas/electric unit
Footprint (in inches): Up to 64 (length) by 47 (width) by 47 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, electronic expansion valve, and external service ports.
Technical support: Call 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept-wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system from a two-stage thermostat.
Warranty information: 10-year parts with registration and a 10-year Quality Pledge to replace the unit if the compressor or heat exchanger fails
Special installation requirements: None.
Contact: Tappan; www.tappan.net.
eProduct 232
Tempstar
Model: SmartComfort® TXC 5600 air conditioner
Footprint (in inches): 31 to 35 (length) by 31 to 35 (width) by 29 to 47 (height)
Serviceability features: Text-based diagnostics capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. High- and low-pressure switches. Three-piece grille panels are easy to remove separately to view and clean. Easy access service valves on all models. Only two screws to access service panel. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoTempstar.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoTempstar.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors and isolation compressor grommets to minimize sound at maximum performance. Compressor sound blanket standard.
IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs. Factory-installed outdoor air temperature sensor.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star ratings with selected coil-only combinations in every size. Up to 16.5 SEER efficiency rating. Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault code messages are viewable on screen.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Tempstar Five-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoTempstar.com.
eProduct 233
Model: SmartComfort® TXT+ air conditioner (TCA9)
Footprint (in inches): 36 (length) by 39 (width) by 52 (height)
Serviceability features: Text-based diagnostic capabilities with Observer communicating wall control (TSTAT0101SC). Innovative control box design. Three-piece grille panels are easy to remove separately to view and clean. Easy access to service valves on all models. Only two screws to access control panel. High- and low-pressure switches. Factory charged with R-410A refrigerant.
Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.GoTempstar.com and at field schools held at participating distributor locations nationwide.
Technical support materials: Product information posted online at dealer website www.GoTempstar.com includes product specification sheets, installation, and operation manuals.
Noise-reduction features: Units are equipped with Copeland scroll UltraTech compressors, ECM fan motors, and isolation compressor grommets to minimize sound at maximum performance. High-performance compressor sound shield standard.
IAQ equipment supported: Factory-installed outdoor air temperature sensor. As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Communicating, self-configuring capabilities with text-based diagnostics and 50-plus different, easy-to-read fault-code text messages when used with the Observer touchscreen communicating wall control (TSTAT0101SC). The last 10 fault-code messages are viewable on screen. Provides two-stage comfort. Efficiencies up to 19 SEER. Tight wire coil guard with 3/8-inch spacing provides maximum protection with optimal airflow.
Warranty information: 10-year limited parts, including compressor and coils, to original homeowner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the Tempstar 10-Year No Hassle Replacement limited warranty. (If the compressor or covered coil fails within 10 years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply. See warranty certificate for details.)
Special installation requirements: TXV expansion devices recommended for maximum system reliability. The units must be installed with a fan coil or furnace capable of supporting two-stage cooling.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoTempstar.com.
eProduct 234
TETCO
Model: ES4-X Series TRT geothermal outdoor unit
Footprint (in inches): 29 (length) by 32 (width) by 23 (height)
Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Back-seating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.
Technical support: Full technical service support available.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.
IAQ equipment supported: The ES4-X Series is compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Makes retrofit installations simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.
Warranty information: Standard: five-year labor allowance (second to fifth years; dealer warrants first year), five-year all parts, 10-year compressor (parts only years six to 10). Optional extended warranty: 10-year labor allowance (second to tenth years; dealer warrants first year), 10-year all parts. Optional lifetime compressor warranty.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 235
Model: ES4-X Series TST geothermal heat pump
Footprint (in inches): 31 (length) by 28 (width) by 23 (height)
Serviceability features: Access doors on all sides with easy access to all components. All digital controls with individual LED fault lights. Brass service valves for easy installation of the air handler or A coil.
Technical support: Full technical service support available.
Technical support materials: Full technical literature supplied with each unit includes service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.
Noise-reduction features: Heavy-gauge steel cabinet lined with recycled blue-jean insulation. Rubber grommet compressor isolation.
IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: A versatile product line that makes installation in tight spaces or retrofit installations easy. The unit is matched with optional air handlers or uncased A coils for dual-fuel applications.
Warranty information: Standard: five-year labor allowance (second to fifth years; dealer warrants first year), five-year all parts, 10-year compressor (parts only years six to 10). Optional extended warranty: 10-year labor allowance (second to tenth years; dealer warrants first year), 10-year all parts. Optional lifetime compressor warranty.
Special installation requirements: Manufacturer did not specify.
Contact: Enertech Global LLC, 618-690-3246; www.enertechgeo.com.
eProduct 236
Trane
Model: Hyperion XL Series 8 air handler
Footprint (in inches): 50 to 62 (length) by 18 to 24 (width) by 22 (height)
Serviceability features: Modular cabinet disassembles for single person installation. Cabinet-front sightglass allows circuit board diagnostic lights to be viewed without door panel removal. Coil and blower pull out thanks to an exclusive new integrated rail system for easy to service. Panel identifiers and quarter-turn fasteners facilitate easier installation and service.
Technical support: Contact local distributor.
Technical support materials: The ComfortSite intranet site for Trane dealers and distributors allows quick access to the most current support materials — including catalogue pages, installer guides, service facts, dealer sheet, product data, submittals, and owners’ manuals.
Noise-reduction features: The Vortica™ blower is designed for quiet, efficient operation. It uses less energy than conventional blowers to deliver more air, while reducing energy consumption, carbon emissions and noise. In addition, the cabinet with double-wall construction and enclosed foam insulation provides quiet operation year after year.
IAQ equipment supported: The CleanEffects whole-house air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, more comfortable home.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Constructed more like a refrigerator than a typical air handler, with insulation fully enclosed between double walls of the innovative modular cabinet, preventing condensation. In addition to eliminating sweating, the cabinet eliminates the loose fibers from fiberglass insulation that may enter the airstream with other air handlers.
Warranty information: 10-year registered limited internal functional parts. If the product is not registered within 60 days of installation, base limited terms will apply. Optional extended warranties are available.
Special installation requirements: None.
Contact: Trane, 903-581-3467; www.trane.com.
eProduct 237
Model: XB300 air conditioner
Footprint (in inches): 29 (length) by 26 to 29 (width) by 24 to 29 (height)
Serviceability features: Compact construction and lightweight design make the XB300 easier to transport and install in places where space is a premium. It also makes storage of replacement units more convenient. The unit features one inlet and one outlet replacing the network of pipes in a typical plate fin coil manifold.
Technical support: Contact local distributor.
Technical support materials: The ComfortSite intranet site for Trane dealers and distributors allows quick access to the most current support materials — including catalogue pages, installer guides, service facts, dealer sheet, product data, submittals, and owners’ manuals.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: The CleanEffects whole-house air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, more comfortable home.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Designed for new construction, multi-family housing, and homeowners who require a lower cost option. It is also designed to provide the same quality and reliability builders have come to expect from Trane, but at a competitive price.
Warranty information: 10-year compressor, 10-year coil, 10-year all other parts when registered within 60 days of installation. Optional extended warranties are available.
Special installation requirements: None.
Contact: Trane, 903-581-3467; www.trane.com.
eProduct 238
Unico
Model: Technibel PHRIE195 air-to-water heat pump
Footprint (in inches): 15 (length) by 57 (width) by 53 (height)
Serviceability features: Manufacturer did not specify.
Technical support: Available at 800-527-0896.
Technical support materials: Wiring diagrams, technical bulletin, and installation manual.
Noise-reduction features: Includes variable-speed condenser fans, compressor blanket, and a separately enclosed compressor/controls compartment.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The control system modulates the compressor speed based on return-air water temperature, which improves overall efficiency of the system, especially during part-load conditions. It also includes a small circulation pump, expansion tank, and booster inline electric heater.
Warranty information: One-year parts and five-year compressor.
Special installation requirements: Manufacturer did not specify.
Contact: Unico Inc., 314-481-9000; www.unicosystem.com.
eProduct 239
Westinghouse
Model: B6VMAX air handler
Footprint (in inches): 22 (length) by 20 (width) by 43 (height)
Serviceability features: Breaker accessible from the front of the unit when heater kit is applied. Heater kits are plug-in and are available in 5 through 30 kW sizes. Built-in filter rack is standard for ease of service.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com. Installation instructions, wiring diagrams, replacement parts lists, and technical data specifications all available.
Noise-reduction features: 1-inch insulation with an R value of 4.2.
IAQ equipment supported: UV lights, zoning, electronic air cleaner, HEPA air cleaner, twinning.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Anteater coil technology with zinc additives stops formicary corrosion.
Warranty information: 10-year parts with matching outdoor equipment, product registration required.
Special installation requirements: Manufacturer did not specify.
Contact: Westinghouse; www.westinghousehvac.com.
eProduct 240
Model: iQ Drive FT4BG split system heat pump
Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)
Serviceability features: Inverter is on a hinged panel that swings open for access to controls and compressor, two-digit diagnostic LCD for troubleshooting and system status, adaptive demand defrost, and external common suction port.
Technical support: Available at 800-422-4328 from 8 a.m. to 4:30 p.m. Central time, Monday through Friday.
Technical support materials: Log in to all technical literature at www.nordyneU.com.
Noise-reduction features: Sound blankets, variable-speed compressor, variable-speed fan motors, and swept wing fan blades.
IAQ equipment supported: System is capable of conventional zoning, will accept external dehumidification requests, perfect fix media filter for air handler applications, as well as electronic air cleaners.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ability to control an inverter driven compressor in a ducted system from a two-stage heat pump thermostat.
Warranty information: 10-year parts with registration and a 10-year Quality Pledge to replace the unit if the compressor fails.
Special installation requirements: None.
Contact: Westinghouse; www.westinghousehvac.com.
eProduct 241
York
Model: D*HQ-24-060 Affinity™ duel fuel package heat pump
Footprint (in inches): 49 (length) by 47 (width) by 34 or 42 (height)
Serviceability features: This unit has gas/electric service connections on the side or bottom. It is easily converted from horizontal airflow to vertical airflow, has a composite, noncorrosive drain pan, and external refrigerant pressure ports. Full perimeter base rails allow for fork or crane lifting. It also features an easy access electrical and control box and attractive, protective coil louvers.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part number and installation instructions, are available at www.upgnet.com or by request.
Noise-reduction features: Swept-wing condenser fan. Insulated return and supply sections.
IAQ equipment supported: ASHRAE 62.2 IAQ composite, double-sloped drain pan. Foil-backed mold-resistant insulation, painted blower housing and wheel. Optional filter rack with 1-inch filters on single phase. Standard with 1-inch filter rack on three-phase product.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This product can be applied on both residential and light commercial applications. It can easily be applied in the side flow configuration for residential applications, yet field converted to be applied in the downflow configuration for roof-mounted applications.
Warranty information: Standard: 10-year parts and compressor (must be registered online within 90 days of installation — otherwise the parts warranty reverts to a 5-year limited parts). 20-year gas heat exchanger.
Special installation requirements: None.
Contact: Johnson Controls, 405-419-6557; www.yorkhvacdealer.com/.
eProduct 242
Model: Latitude™ Series TCGF air conditioner
Footprint (in inches): 29 (length) by 29 (width) by 28 (height)
Serviceability features: This unit has easy service access with fully exposed refrigerant connections and a single panel covering the electrical controls. Secured reusable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. Additionally, the long-life, permanently lubricated motor bearings need no annual servicing.
Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 6 p.m. Eastern Time.
Technical support materials: A full technical guide and installation instructions including wiring diagrams, sizes, parts, accessories, part number and installation instructions are available at www.upgnet.com or by request.
Noise-reduction features: The upward airflow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolated compressor mounts minimize compressor operating sounds.
IAQ equipment supported: Compatible with a complete line of York IAQ products, including ventilation systems, ultraviolet air treatment systems, electronic and media air cleaners, and whole-house humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This unit uses environmentally friendly R-410A refrigerant with an advanced, all-aluminum microchannel coil for reliability, offers quiet operation, permanently lubricated motor bearings, and an advanced design allows maximum performance in minimum space. Paired with a York furnace or air handler utilizing a high-efficiency blower motor, system performance can reach 16 SEER.
Warranty information: 10-year limited compressors and 10-year limited parts (must be registered online within 90 days of installation — otherwise the parts warranty reverts to five-year limited parts.)
Special installation requirements: TXV is required.
Contact: Johnson Controls, 414-524-5487; www.yorkhvacdealer.com/.
eProduct 243
Publication date: 04/09/2012
