The product grid (see the PDF link at the bottom of this article) includes technical facts such as fuel type, heater type, single or multi stage, and unit size.

Amana

Model: AMVC8 gas furnace

Footprint (in inches): 19 (length) by 16 (width) by 33 (height)

Serviceability features: Easy access two front panels, self-diagnostic control boards, ComfortNet system compatible offering service and maintenance diagnostics.

Technical support: Available by calling 888-593-9988, online by clicking PartnerLink, viewing DealerFirst Mobile, or contacting local Amana brand distributor.

Technical support materials: All technical support documents are available from local Amana brand distributors, or online at PartnerLink, www.amana-hac.com and DealerFirst mobile.

Noise-reduction features: Modulating gas valve, variable-speed ECM circulator motor, cabinet insulation, two-speed induced draft motor.

IAQ equipment supported: Compatible with all IAQ devices including wireless connections when installed as part of a ComfortNet communicating system.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Modulation capacity range of 35 to 100 percent, ComfortNet system compatible, award-winning dual-diameter tubular heat exchanger, outstanding product and component limited warranty coverage.

Warranty information: Lifetime unit replacement limited, lifetime heat exchanger limited, 10-year parts limited upon qualified registration in applicable jurisdictions.

Special installation requirements: No special installation requirements.

Contact: Goodman Global Group Inc., 713-861-2500; www.amana-hac.com.

eProduct 160

Model: AMVM96 gas furnace

Footprint (in inches): 28 (length) by 17 (width) by 40 (height)

Serviceability features: Easy access two front panels, self-diagnostic control boards, ComfortNet system compatible offering service and maintenance diagnostics.

Technical support: Available by calling 888-593-9988, online by clicking PartnerLink, viewing DealerFirst Mobile, or contacting local Amana brand distributor.

Technical support materials: All technical support documents are available from local Amana brand distributors or online at PartnerLink, www.amana-hac.com, and DealerFirst mobile.

Noise-reduction features: Modulation capacity range of 35 to 100 percent, ComfortNet system compatible, award-winning dual-diameter tubular heat exchanger.

IAQ equipment supported: Compatible with all IAQ devices including wireless connections when installed as part of a ComfortNet communicating system.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Modulation capacity range of 35 to 100 percent, ComfortNet system compatible, award-winning dual-diameter tubular heat exchanger.

Warranty information: Lifetime unit replacement limited, lifetime heat exchanger limited, 10-year parts limited upon qualified registration in applicable jurisdictions.

Special installation requirements: No special installation.

Contact: Goodman Global Group Inc., 713-861-2500; www.amana-hac.com.

eProduct 161

American Standard Heating & Air Conditioning

Model: Gold XI furnace (AUH1D120A9H51A and ADH1D110A9H51A)

Footprint (in inches): 40 (length) by 18 to 25 (width) by 28 (height)

Serviceability features: Products are designed with exacting specifications and innovative features and are easy to access and service for better long-term performance and a longer life. Gold XI has upflow and downflow models.

Technical support: Contact local distributor.

Technical support materials: The ASDealerNet intranet site for dealers and distributors allows quick access to the most current support materials, including catalog pages, installer guides, service facts, dealer sheets, product data, submittals, and owners’ manuals.

Noise-reduction features: Heavy steel insulated cabinet is durable, quiet, and holds more heat in the furnace to better warm a home.

IAQ equipment supported: The AccuClean whole-house air cleaner provides advanced air filtration that removes more dust, pollen, and other irritants from conditioned air for a cleaner, healthier, more comfortable home.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Converts up to 95 percent of fuel to heat a home. May help increase overall cooling efficiency rating by up to an additional 2 SEER points when installed as part of a complete system, said the company. Saves energy usage while reducing greenhouse gas emissions. Operates quietly and efficiently with multispeed blower motor.

Warranty information: Lifetime limited heat exchanger, 10-year limited internal functional parts, If the product is not registered within 60 days of installation, American Standard’s base limited warranty terms will apply.

Special installation requirements: None.

Contact: American Standard Heating & Air Conditioning, 903-581-3660; www.americanstandardair.com.

eProduct 162

Model: Platinum ZV geothermal split system indoor unit

Footprint (in inches): 21 (length) by 26 (width) by 32 (height)

Serviceability features: Brass swivel water connections and external refrigerant connections for ease of installation. Easily removable top, front, and side access panels. LED fault and status lights with memory for easy diagnostics. Standard accumulator and optional GeoStart for compressor reliability. High- and low-pressure refrigerant controls and easily accessible loop pump wiring.

Technical support: Contact local distributor.

Technical support materials: The ASDealerNet intranet site for dealers and distributors allows quick access to the most current support materials, including catalog pages, product data and installer guides, submittals and owners’ manuals.

Noise-reduction features: Fully insulated cabinet, double isolation mounted compressor with sound blanket reduces noise levels for whisper quiet operation.

IAQ equipment supported: Environmentally friendly R-410A refrigerant, optional hot water generator for additional savings, and the ability to match the Platinum ZV with a variable-speed air handler and AccuClean whole house air cleaner makes this an Energy Star rated system for healthy comfort as well as energy efficiency.

Thermostat compatibility: Compatible with most three-heat, two-cool thermostats such as the Acculink Platinum ZV Control.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The ability to install the ZV Heat Pump up to 60 feet away from the air handler or furnace makes this ideal for attic systems or replacement installations. The optional hot water generator can save up to 50 percent of the cost for water heating compared to conventional hot water heating.

Warranty information: 10-year parts and labor allowance standard on all models; five-year parts and labor allowance on all accessories. No registration required.

Special installation requirements: Designed for indoor installations only. Features a weatherized cabinet and freeze protection controls. See www.americanstandardair.com for more details.

Contact: American Standard Heating & Air Conditioning, 903-581-3660; www.americanstandardair.com.

eProduct 163

Arcoaire

Model: IIX 96 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Blower assembly is mounted on rails for easy, upfront installation and removal. These new gas furnaces feature large, robust one-quarter turn knobs for easy door installation and removal. A super-bright LED makes diagnostic flash codes easier to read. Allows technicians to see most recent stored fault codes even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.goarcoaire.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.goarcoaire.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Arcoaire furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed for four-way multi-position installation, just 35 inches tall, and lighter weight than previous counterparts, these two-stage models feature ECM blower motors that can deliver an increase in cooling efficiency when paired with select Arcoaire condensing units and evaporator coils. Meets low NOx emissions standards.

Warranty information: Five-year No Hassle Replacement™ limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, LLC (ICP), 800-315-4370; www.goarcoaire.com.

eProduct 164

Model: PS95 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Sturdy knobs allow service technicians to remove and replace furnace doors with a twist of the wrist. A super-bright LED makes diagnostic flash codes easier to read. Slide-out heat exchanger and blower assembly.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.goarcoaire.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.goarcoaire.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115 V) and humidifiers (24 V and 115 V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four position installation capability. Direct ignition with silicon nitride igniters that last longer, can better tolerate high-line voltage, and don’t require voltage regulators. Meets California low NOx standards. Dual certified venting. Internal condensate drain system. High temperature limit control guards against overheating.

Warranty information: 20-year heat exchanger limited; 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.goarcoaire.com.

eProduct 165

Bard Mfg. Co., Inc.

Model: Bard Lo-Boy oil furnace

Footprint (in inches): 48 (length) by 23 (width) by 36 (height)

Serviceability features: Slide-out combustion chamber/burner assembly allows easy removal for service and ensures burner alignment. Plug-in connectors for blower and burner wiring connections simplify maintenance. Four heat exchanger cleanout ports. Advanced combustion chamber material for increased durability. Selected models have reduced firing rates. All models designed to provide fresh air for combustion with optional fresh air kit. Increased electrical and oil line access versatility. Sidewall vent option. Secondary limit control for extra safety. Twelve and 14 gauge heat exchanger.

Technical support: Available through local Bard distribution network.

Technical support materials: Installation manuals, parts manuals, wiring diagrams (digital and print versions) available through local distributor or website.

Noise-reduction features: Pyrolite combustion chamber: Sound absorbing high temperature fiber provides faster heat build-up in heat exchanger for greater efficiency and quieter operation. Cabinet insulated to reduce sound levels.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Combustion chamber/burner mounting system allows for easy removal for service and ensures burner alignment. Twelve and 14 gauge steel heat exchanger, four cleanout ports for easy cleaning, combustion air option, and secondary limit control for added safety.

Warranty information: Five-year parts standard. Limited lifetime heat exchanger.

Special installation requirements: Manufacturer did not specify.

Contact: Bard Manufacturing Co. Inc., 419-636-1194; www.bardhvac.com.

eProduct 166

Model: Geo-Trio geothermal heat pump

Footprint (in inches): Upflow, downflow applications: 30 (length) by 22 (width) by 66 (height)

Serviceability features: Multi-position system, suitable for upflow, downflow, horizontal left or right, split and dual-fuel configurations. Step capacity two-stage scroll compressor, R-410A refrigerant, variable-speed ECM motor, domestic hot water heat exchanger system, high- and low-pressure switches standard, insulated high efficiency coaxial water coil. All water and refrigerant connections on outside of cabinet for ease of installation. Energy Star certified.

Technical support: Available through local Bard distribution network.

Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and digital), website.

Noise-reduction features: Compressor/service compartment insulated to reduce noise levels, variable-speed ECM blower motor and step-capacity two-stage compressor with double isolation mounting system designed for quieter operation.

IAQ equipment supported: Compatible with field installed electronic air cleaner or high-efficiency media type filters through installing dealer.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Three separate sections (A-coil, blower coil, and compressor) are each self-contained allowing for multiple configurations (upflow, downflow, horizontal left or right as split system, and dual fuel). Fewer SKUs with more product offering.

Warranty information: Five-year parts, 10-year compressor standard. If registered, 10-year all parts.

Special installation requirements: Manufacturer did not specify.

Contact: Bard Manufacturing Co. Inc., 419-636-1194; www.bardhvac.com.

eProduct 167

Broan

Model: iQ Drive FT4BG heat pump

Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)

Serviceability features: Utilizes an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information, as well as a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Adaptive demand defrost provides additional energy savings in heating by defrosting only when necessary. Five-minute restart time delay when the unit shuts down protects the system.

Technical support: Available at 800-422-4328, Monday to Friday, from 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Features a variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability, and swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The matched B6VM air handler or FG7T furnace has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Locks out heat pump heating operation below 0˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor fails.

Special installation requirements: No.

Contact: Nordyne, 636-561-7300; www.broanhvac.net.

eProduct 168

Model: iQ Drive R6GI gas pack

Footprint (in inches): 56 to 64 (length) by 47 (width) by 47 (height)

Serviceability features: Features an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information. Utilizes a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Five-minute restart time delay when the unit shuts down further protects the system.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The variable-speed blower control board accepts dehumidification requirements from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five cooling capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.broanhvac.net.

eProduct 169

Bryant

Model: Evolution® Extreme 280ANV heat pump

Footprint (in inches): 35 (length) by 35 (width) by 44 (height)

Serviceability features: When heat pump is paired with an Evolution control, the control can display system history for faster diagnosis of the complete system. With homeowner permission, a service technician can attach a second control to outdoor unit for service without entering the home and access the system remotely with a remote access module (sold separately) to prepare for service call in advance if connected to a Wi-Fi network.

Technical support: Provided through nationwide network of local distributors.

Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, and wiring diagram on www.hvacpartners.com.

Noise-reduction features: The AeroQuiet™ system includes sound-deadening features in the cabinet, fan system, and top for better airflow, lower noise, and better efficiency. These features include quiet motor mounts, a compressor sound blanket, forward-swept fan blades, a sound elimination compressor mounting plate, and an integrated silencer airflow baffle top.

IAQ equipment supported: As part of an installed system, compatible with Bryant IAQ system components: humidifiers, ventilators, UV lamps, and the Evolution air purifier.

Thermostat compatibility: Requires a special thermostat. Evolution control recommended for full functionality. Compatible with most thermostats, but with limited functionality.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Achieves ultra-high heating efficiency up to 13 HSPF plus cooling efficiencies up to 20.5 SEER. Offers high-tech, variable-speed technology with ease of installation, service, and maintenance. Variable-speed capacity control offers higher heating capacity at lower outdoor temperature so the system uses auxiliary heat less often.

Warranty information: 10-year parts limited (including compressor) with timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Bryant Heating & Cooling Systems, 860-994-7237; www.bryant.com.

eProduct 170

Model: Evolution System Plus 80V™ gas furnace (315AAV/315AAJ)

Footprint (in inches): 29 (length) by 14 to 25 (width) by 33 (height)

Serviceability features: When the gas furnace is paired with an Evolution control, the control can display system history for faster diagnosis of the complete system. Non-volatile memory allows technicians to see fault code history even if power has been interrupted. Large, twist door attachments make access easy. Remove two screws and blower assembly slides out on rails.

Technical support: Support provided through nationwide network of local distributors.

Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, and wiring diagram on www.hvacpartners.com.

Noise-reduction features: Direct-drive, variable-speed blower motor operates at lower quieter speeds most of the time. Sealed blower compartment, insulated cabinet, and rubber grommets absorb sound and vibration.

IAQ equipment supported: As part of an installed system, compatible with Bryant IAQ system components: humidifiers, ventilators, UV lamps, and the Evolution air purifier.

Thermostat compatibility: Requires a special thermostat. Evolution control required for full-feature capability. Compatible with most thermostats with reduced functionality.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Four-way multi-position installation with 13 different vent options match a wide range of installation needs. Features Perfect Heat™ and Perfect Humidity™ systems for improved comfort, reduced drafts, lower sound levels, better humidity control, and less temperature differences between rooms.

Warranty information: Ten-year parts limited and 20-year heat exchanger limited to the original owner with timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Bryant Heating & Cooling Systems, 860-994-7237; www.bryant.com.

eProduct 171

Carrier

Model: 25VNA Infinity® 20 heat pump with Greenspeed™ intelligence

Footprint (in inches): 35 (length) by 35 (width) by 44 (height)

Serviceability features: Communication between system components allows the Infinity Touch Control to display system history for faster diagnosis. Ability to attach second control to outdoor unit allows service without entering the home, with homeowner permission. Control lets technicians access system remotely via the Internet to prepare for service call in advance.

Technical support: Provided through nationwide network of local distributors or 800-227-7437 (800-CARRIER).

Technical support materials: Installation and startup instructions, troubleshooting guide, critical parts list, and wiring diagram on www.hvacpartners.com.

Noise-reduction features: Systems achieve low sound ratings with quiet motor mounts, a compressor sound blanket, forward swept fan blades, a laminated sound elimination compressor mounting plate, and a unique top with integrated silencer airflow baffle. Variable-speed compressor and variable-speed ECM blower motors operate at quieter lower speeds most of the time.

IAQ equipment supported: Compatible with Carrier IAQ system components: humidifiers, ventilators, germicidal UV lamps, and the Infinity air purifier. The Infinity Touch Control features Ideal Humidity® functionality: monitoring and controlling both temperature and humidity allows the heat pump to effectively manage humidity during the cooling season as well as during heating with a compatible humidifier.

Thermostat compatibility: Requires a special thermostat. Infinity Touch Control recommended for full functionality. Compatible with most thermostats, but with limited functionality.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: When paired with an Infinity Touch Control, system energy consumption can be estimated and displayed in real time. Highest heating efficiency ducted, air source heat pump available with an HSPF up to 13. Variable-speed capacity control enables better heating capacity as outdoor temperature drops for less reliance on auxiliary heat. Makes state-of-the-art variable-speed technology available with ease of installation, service, and maintenance.

Warranty information: 10-year parts limited (including compressor) with timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Carrier Corp., 800-946-2930; www.carrier.com.

eProduct 172

Model: 59MN7 Infinity 98 furnace with Greenspeed™ intelligence

Footprint (in inches): 30 (length) by 18 to 25 (width) by 35 (height)

Serviceability features: Infinity Touch Control allows remote Internet access to system to prepare for service call in advance. Non-volatile memory allows technicians to see fault code history even if power has been interrupted. Large, twist door attachments make access easy. Remove two screws and blower assembly slides out on rails.

Technical support: Support provided through nationwide network of local distributors.

Technical support materials: Installation and startup instructions, troubleshooting guide, critical parts list, and wiring diagram on www.hvacpartners.com.

Noise-reduction features: Modulating gas valve lets furnace run at quieter, lower fire rates most of the time. Variable-speed ECM blower and inducer motors can operate at quieter lower speeds. Insulation dampens sound in heat exchanger and blower sections of cabinet. Blower motor is mounted on soft-mount rubber grommets to reduce sound.

IAQ equipment supported: Compatible with Carrier IAQ system components: humidifiers, ventilators, germicidal UV lamps, and Infinity air purifiers. The furnace ships with an external media filter cabinet.

Thermostat compatibility: Requires a special thermostat. Intuitive Infinity Touch Control recommended for full functionality. Compatible with most thermostats, but with limited functionality.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Furnace line includes the most efficient gas furnace at up to 98.5 percent AFUE (Model 59MN7A060V21--20). Modulating gas valve fluidly adjusts from 40 to 100 percent of capacity in one-percentage-point increments for precise comfort. When paired with an Infinity Touch Control, homeowners can access their heating and cooling system via some mobile devices.

Warranty information: Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: Carrier Corp., 800-946-2930; www.carrier.com.

eProduct 173

Century

Model: Patriot 80 OL-B Series oil furnace

Footprint (in inches): 52 (length) by 20 to 23 (width) by 37 (height)

Serviceability features: Components are located for simple access with removable panels and slide-out blower assembly with handy plug-in wiring. Easily accessed stainless steel clean-out ports promote complete servicing of heat exchanger. Indicator lights on the advanced burner control simplify monitoring and diagnostics.

Technical support: Experienced technical advisors are available to answer questions about installation, operation, and service at 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives throughout the United States and Canada can also provide assistance. Contact information can be found on the website under “Where to Buy.”

Technical support materials: Includes a comprehensive installation manual with a start-up checklist and wiring diagrams. There is a separate manual for the Beckett GeniSys™ advanced burner control. A user’s manual for consumers explains operation and maintenance procedures. These are packed with the unit and can be viewed or downloaded from the website, or they can be emailed by customer service upon request.

Noise-reduction features: Foil-faced high density cabinet insulation reduces operational sound as well as heat loss. A dense, ceramic fiber combustion chamber provides a quiet and efficient operating furnace. Solid state ignition delivers smooth burner igniting.

IAQ equipment supported: OL-95 models have large 18 by 19-inch filter; OL-125 models have 19- by 21-inch filter.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Compact size of this lowboy furnace makes it suitable for a variety of installations, including closets, attics, and utility rooms. Exceptionally efficient and versatile with a powerful heat exchanger covered by a limited lifetime warranty. A simple nozzle change adjusts the firing rate; furnace is shipped with high fire nozzle installed, low fire nozzle included uninstalled. Built with Beckett AFG burner with flame retention head. Cabinet is corrosion-resistant steel with baked finish for durability.

Warranty information: Lifetime heat exchanger; five-year other parts (some limitations apply, see printed warranty on website or packed with product). AssurancePlus extended service agreements available; contact a Century representative.

Special installation requirements: The heating output should be closely matched to the desired heating requirements of the home. The installation manual contains detailed instructions as well as a checklist of start-up procedures.

Contact: Century, 517-787-2100; www.century-hvac.com.

eProduct 174

Model: RPHE-093G wall-mounted room air heat pump

Footprint (in inches): 43 (length) by 10 (width) by 23 (height)

Serviceability features: Fresh air and activated carbon filters are easily removed from the top of the unit for cleaning or replacement. Parts list shows all components and part numbers in an exploded view diagram.

Technical support: Experienced technical advisors are available to answer questions about troubleshooting, installation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Additionally, sales representatives around the United States and Canada can also provide assistance. Contact information can be found on the website under “Where to Buy.”

Technical support materials: Includes a comprehensive installation and operation manual. This is packed with the unit and can be viewed or downloaded from the website, or can be emailed upon request. Also available on the website or by email for contractors is a parts list with exploded view of all components.

Noise-reduction features: Designed for quiet operation, the indoor sound level is just 48 dBA. ECM blower motor is not only efficient but quiet.

IAQ equipment supported: A standard air filter removes contaminants when the fresh air system is used; this filter can be washed and reused. Additionally, an activated carbon filter eliminates smaller suspended particles such as free chlorine, odors, and toxic particles that are too small to filter out by using just the standard filter. The activated carbon filter should be changed every three months to maintain the indoor air quality.

Thermostat compatibility: Built-in thermostat.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: Self-contained room air heat pump mounts on inside of exterior wall, features sleek design, plug-and-play operation. Includes heating, cooling, dehumidification, and air circulation modes. Heat pump capacity is 9,300 Btuh. Two electric heaters built into sides of the unit add 6,800 Btuh of supplemental heat for 16,100 Btuh integrated heat; heat is produced even at very low outdoor temperatures. Controlled by wireless remote or on-board touchpad.

Warranty information: One-year parts and labor, five-year coverage on sealed system and functional parts (replacement of parts only); some limitations apply; see printed warranty on website or packed with unit for details. AssurancePlus extended service agreements available; contact Century representative for details.

Special installation requirements: No refrigerant lines, charging or brazing required. Template is used to indicate where to drill holes in outer wall of building for intake and exhaust outlets. Flexible grilles, intake and exhaust hoses, and condensate drain line can be installed from inside the building — ideal for multi-story structures. Then unit is hung from interior mounting bracket, plugged into power source, and operated. A 208/230-V power outlet required. Multiple units can be connected to a data network for guest room control.

Contact: Century, 517-787-2100; www.century-hvac.com.

eProduct 175

ClimateMaster

Model: Tranquility® 30 Digital Series geothermal heat pump

Footprint (in inches): Manufacturer did not specify.

Serviceability features: iGate™ technology represents the next generation in intelligent controls by using two-way communication to provide a gateway into the system. The iGate control system allows the homeowner and dealer to monitor the performance of the unit, custom tailor its operation, and diagnose any issues, all from the thermostat. The Tranquility 30 also has a sing out/drop-out control box which offers easy access.

Technical support: Available at 405-745-6000.

Technical support materials: All wiring diagrams, installation instructions, and submittals are available online.

Noise-reduction features: Compressor double isolation, foil faced insulation in the blower section, and fully insulated compressor section attribute to quiet operation.

IAQ equipment supported: MERV 11 2-inch filters are standard. Optional EarthPure air cleaners are available, which remove up to 97 percent of impurities down to 0.3 microns, as well as unwanted odors.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The packaged geothermal heat pump delivers the ultimate in efficiency (30 EER and 4.8 COP), comfort, reliability, and serviceability — intelligently driven by the iGate, the industry’s first two-way communicating control, two-stage compressor, variable-speed fan and industry-first vFlow™ internal variable water flow components. The Tranquility 30 also delivers reliable operation, lower operating cost, and compact installation.

Warranty information: Five-year standard with the option to extend to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster, 405-745-6000; www.climatemaster.com.

eProduct 176

Model: Trilogy™ 40 Q-Mode geothermal heat pump

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Series has advanced monitoring and advanced diagnostic sensors along with communicating controls that will notify the homeowner or installer of any problems with the unit. The thermostat will display the refrigerant, water and air pressure, and flow temperature conditions at the time of the fault, as well as the calculations of superheat-subcool. Also has a swing out control board and removable panels, which allow for easy access when servicing the unit.

Technical support: Available at 405-745-6000.

Technical support materials: All wiring diagrams, installation instructions, and submittals are available online at www.climatemaster.com.

Noise-reduction features: The unit has tubing design and elimination of metal-to-metal contact, along with dual-stage compressor vibration isolation and flexible rubber motor mounting. Also, when the demand is low, operation slows down and runs in part load, which results in ultra-quiet operation.

IAQ equipment supported: MERV 11 2-inch filters are standard. Optional EarthPure air cleaners are available, which remove up to 97 percent of impurities down to 0.3 microns, as well as remove unwanted odors.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The first geothermal unit on the market to break the 40 EER barrier. Other benefits include Q-Mode™, which delivers comfort and efficiency in four modes, significantly reducing home heating and cooling energy costs while delivering year-round, dedicated hot water. iGate Dashboard monitors refrigerant, air, and water conditions and uses 15 sensors to precisely control the system and display system status and troubleshooting information. vFlow varies water flow to match unit capacity, which improves unit operation and reliability and reduces water pumping power by 60 to 80 percent compared to traditional external pumping modules.

Warranty information: Five-year standard, optional 10-year extended warranty available.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster Inc., 405-745-6000; www.climatemaster.com.

eProduct 177

Coleman

Model: Echelon CP9C modulating gas furnace

Footprint (in inches): 30 (length) by 18 to 25 (width) by 33 (height)

Serviceability features: Compact 33-inch height fits in tight spaces. Easily convertible, multi-position design provides configuration flexibility. Folded sheet metal eliminates sharp edges. Interchangeable doors use tool-less quarter-turn knobs for easy removal. Slide-out blower assembly for easy access. Control board features tri-color LEDs for easy diagnostics. Self-priming internal condensate system eliminates external traps.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request. Unique quick reference setup guides for contractors are provided with every furnace.

Noise-reduction features: Operation is quiet — as low as 65 dB for models up to 98 percent AFUE. An insulated blower compartment ensures quiet operation.

IAQ equipment supported: Variable-speed ECM blowers circulate air for longer time periods. Longer run times provide consistent temperatures and longer periods of air filtering, resulting in cleaner, more comfortable air. External air filters offer maximum flexibility in meeting customer IAQ needs. Compatible with all Coleman premium IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: This product achieves 97.5 to 98 percent AFUE, qualifying it for Energy Star Most Efficient 2012 designation. The furnaces modulate from 35 to 100 percent in 100 increments. Two-way communications with the system controller provide fault code transmission, increased homeowner options for comfort, and automated configuration capability for contractors.

Warranty information: Lifetime limited both heat exchangers to the original purchaser; a 20-year limited from original installation date to subsequent purchaser. 10-year heat exchanger in commercial applications. Standard five-year limited parts. Extended 10-year limited parts when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Among the easiest furnaces to install available today. Smaller height, four-way configuration, multiple venting options, moveable duct connector flanges, no knockouts, internal condensate drain trap, supported blower assembly, controls access, quarter turn knobs on doors, interchangeable doors, and multiple venting options make this unit easy to install in replacement or new construction applications.

Contact: Johnson Controls, 414-524-5487; www.colemanhvacdealer.com.

eProduct 178

Model: LX Series TM9V040A10MP11 gas furnace

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: Can be easily applied in upflow, horizontal left/right, or downflow installations. Easy access to furnace controls to connect power/control wiring and no knockouts make installation easier. A fully supported blower ensures easy access and removal of the blower. No external condensate trap is required due to patent pending design.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request. A unique quick reference set up guide for contractors is provided with every furnace.

Noise-reduction features: Quiet two-stage inducer, burner and variable-speed ECM blower operation ensure reduced noise as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable-speed ECM fan motors provide more consistent airflow and temperatures and more options for continuous airflow settings, resulting in increased filtration and improved comfort. The TM9V is compatible with all Coleman premium IAQ products.

Thermostat compatibility: A wide selection of compatible thermostats is available to provide optimum performance and features for any installation. An adjustable delay timer allows two-stage operation with a single-stage thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The unit’s narrow width (14.5 inches) allows for easy installation in retrofit applications and areas of limited space. The furnace also features a patent-pending, self-priming internal condensate trap, lower airflow capacity, and multiple configurations. Better heat load matches (input rate of 40,000 Btuh) help avoid oversized equipment selections.

Warranty information: Lifetime limited both heat exchangers to the original purchaser; a 20-year limited from original installation date to subsequent purchaser. Ten-year heat exchanger commercial applications. Standard five-year limited parts. Extended 10-year limited parts when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Installation is easy thanks to design features such as narrow 14.5-inch width, minimal conversion for upflow, horizontal or downflow installation, moveable duct connector flanges, no knockouts, internal condensate drain trap, supported blower assembly, venting options, controls access, quarter turn knobs on doors, and inducer rotation using four screws.

Contact: Johnson Controls, 414-524-5487; www.colemanhvacdealer.com.

eProduct 179

Comfort-Aire

Model: GeoLogix HEH Series geothermal heat pump

Footprint (in inches): 48 to 68 (length) by 23 to 25 (width) by 18 to 21 (height)

Serviceability features: Removable panels on three sides enhance accessibility. Performance monitor signals a potential problem so maintenance can be scheduled. Safety features protect the unit from such conditions as high pressure, loss of charge, etc. Digital communication control provides diagnostic data for set-up and service calls. If communicating thermostat is not used, optional diagnostic tool connects through built-in port.

Technical support: Experienced technical advisors are available to answer questions about installation, operation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives throughout the United States and Canada can also provide assistance. Contact information available on website under “Where to Buy.” Geothermal training classes are offered at company headquarters and other cities in the United States (fee charged for two-day training).

Technical support materials: Includes a comprehensive installation, operation and maintenance manual with troubleshooting instructions and start-up/checking procedures. The Engineering Design Guide includes specifications, performance data, antifreeze correction charts, and wiring diagrams. These can be viewed or downloaded from the website or emailed upon request. For parts information, contact Customer Service.

Noise-reduction features: Double spring and grommet isolation mounting system for the compressor, plus torsion motor mount reduce vibration and related sound; compressor compartment is insulated and is separated from air handler by insulated divider; discharge muffler reduces inherent compressor pulse noise, making HEH one of quietest units on the market.

IAQ equipment supported: Extra-large air filter is located on the side for handy filer changes. Also with two-stage operation, the compressor runs for longer periods of time (mostly at economical low speed); with less on-off cycling, more air is passing through the filter on a regular basis, helping to improve IAQ.

Thermostat compatibility: Use with Comfort-Air communicating thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Integrated digital communication controls link the thermostat and motor, and compressor staging, providing set-up and diagnostic data. Among the smallest cabinet sizes in the industry, the HEH is compatible with numerous other models, making it an ideal replacement. Extended range refrigerant circuit makes models capable of ground water, ground loop, and water loop installation.

Warranty information: 10-year compressor and parts, five-year labor allowance; some limitations apply including registration within 90 days of purchase; see printed warranty on website or packed with unit for details. Also, start-up certificate should be submitted to company. AssurancePlus extended service agreements available; contact a Comfort-Aire representative for details.

Special installation requirements: Can be used for ground water, ground loop, and water loop installations. A modulating valve is available for ground water installations to interface with the unit’s controls. Installation instructions are clearly detailed in the IOM.

Contact: Comfort-Aire, 517-787-2100; www.comfort-aire.com.

eProduct 180

Model: OUFB Patriot 80 Highboy Series oil furnace

Footprint (in inches): 31 to 33 (length) by 20 to 23 (width) by 54 (height)

Serviceability features: With removable panels and slide-out blower assembly with handy plug-in wiring, components are located for simple access. Easily accessed stainless steel clean-out ports promote complete servicing of heat exchanger. The advanced burner control has indicator lights to simplify monitoring and diagnostics.

Technical support: Experienced technical advisors are available to answer questions about troubleshooting, installation, and service by calling 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Additionally, sales representatives around the United States and Canada can also provide assistance. Contact information can be found on the website under “Where to Buy.”

Technical support materials: Includes a comprehensive installation manual with a start-up checklist and wiring diagrams. There is a separate manual for the Beckett GeniSys advanced burner control. Consumers receive a user’s manual explaining operation and maintenance procedures. Documents are packed with the unit and can be viewed or downloaded from the website, or they can be emailed upon request.

Noise-reduction features: A dense, ceramic fiber combustion chamber provides a quiet and efficient operating furnace while foil-faced high density insulation reduces operational sound as well as heat loss. Solid state ignition delivers smooth burner igniting.

IAQ equipment supported: Large 16- by 25-inch filter; largest model has two filters.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Exceptionally efficient and versatile with a powerful heat exchanger covered by a limited lifetime warranty. A simple nozzle change adjusts the firing rate; furnace is shipped with high fire nozzle installed, low fire nozzle included uninstalled. Built with Beckett AFG burner with flame retention head. Cabinet is corrosion-resistant steel with baked finish for durability.

Warranty information: Lifetime heat exchanger, five-year other parts; some limitations apply, see printed warranty on website or packed with unit. AssurancePlus extended service agreements available, contact Comfort-Aire representative.

Special installation requirements: Detailed installation manual contains a checklist covering installation documentation and start-up procedure.

Contact: Comfort-Aire, 517-787-2100; www.comfort-aire.com.

eProduct 181

Comfortmaker

Model: PS95 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Sturdy knobs allow service technicians to remove and replace furnace doors with a twist of the wrist. A super-bright LED makes diagnostic flash codes easier to read. Slide-out heat exchanger and blower assembly.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.gocomfortmaker.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.gocomfortmaker.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115 V) and humidifiers (24 V and 115 V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four-position installation capability. Direct ignition with silicon nitride igniters that last longer, can better tolerate high-line voltage, and don’t require voltage regulators. Meets California low NOx standards. Dual-certified venting. Internal condensate drain system. High temperature limit control guards against overheating.

Warranty information: 20-year heat exchanger limited; 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.gocomfortmaker.com.

eProduct 182

Model: SoftSound® VT 96 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: A super-bright LED makes diagnostic flash codes easier to read. Allows technicians to see last seven fault codes even if power is interrupted. Blower assembly is mounted on rails for easy, upfront installation and removal. These new gas furnaces feature large, robust one-quarter turn knobs for easy door installation and removal.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.gocomfortmaker.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.gocomfortmaker.com includes product specification sheets, installation and operation manuals, and technical support-parts manuals.

Noise-reduction features: Super-quiet, variable-speed ECM motors minimize operating sound levels. The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Comfortmaker furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring function only when used with new Observer™ communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Featuring a communicating control, VT 96 furnaces are built with stainless steel primary and secondary heat exchangers. Two-stage heat and two-stage cooling compatible, furnace has ECM variable-speed blower motor, is designed for four-way multi-position installation, is just 35 inches tall and lighter weight than previous counterparts. Meets low NOx emissions standards.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.gocomfortmaker.com.

eProduct 183

Daikin AC (Americas)

Model: RMXS048LVJU+BPMKS_A air-to-air multi-zone heat pump

Footprint (in inches): 13 (length) by 36 (width) by 53 (height)

Serviceability features: Self-diagnostics for simple error code retrieval; Dr. Daikin error code assistance; fully configurable field settings to optimize system operation to suit customer needs.

Technical support: Available at 866-432-4546 (866-4DAIKIN) between 7 a.m. and 6 p.m. Central time.

Technical support materials: Full suite of installation and service manuals, maintenance guides, spare parts documentation, and dealer support handbooks. Dr. Daikin error code support via smartphone, SMS text message, or web (www.drdaikin.com).

Noise-reduction features: Low noise components including compressor, fan and fan motor for nominal sound levels of 58 dBA. Indoor units are as low as 31 dBA.

IAQ equipment supported: Can be combined with the full suite of Daikin’s residential ductless type indoor unit offerings that include standard filters and deodorizing filter kits.

Thermostat compatibility: Indoor units are provided with wireless controllers, and optional Smart-Stat is available for purchase. Not compatible with aftermarket thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Bridges the gap from multi split to small capacity VRF systems by providing connectivity for up to eight zones with leading efficiency in its class. Also features contractor-friendly installation requirements via an array of cost friendly and feature packed indoor unit options including ducted and ductless.

Warranty information: Five-year parts, seven-year compressor. 10-year compressor and parts extended warranty program available to specialized dealers.

Special installation requirements: R-410A certification, Daikin factory training.

Contact: Daikin AC (Americas), 972-245-1510; www.daikinac.com.

eProduct 184

Day & Night

Model: Constant Comfort™ DLX 96 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Sturdy knobs allow service technicians to remove and replace furnace doors with a twist of the wrist. A super-bright LED makes diagnostic flash codes easier to read. Blower assembly is mounted on rails for easy, upfront installation and removal. Allows technicians to see latest stored fault codes even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.godayandnight.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.godayandnight.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Day & Night furnaces can control relative humidity during cooling operations. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed for four-way multi-position installation, just 35 inches tall, and lighter weight than previous counterparts. Comes with ECM blower motors that can deliver an increase in cooling efficiency when paired with select Day & Night condensing units and evaporator coils. Meets low NOx emissions standards.

Warranty information: One-year No Hassle Replacement limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.godayandnight.com.

eProduct 185

Model: PS92 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Furnace is equipped with easy-to-remove panels and innovative knobs to allow easy door removal and secure attachment. A super-bright LED makes diagnostic flash codes easier to read. For servicing convenience, the entire blower assembly and heat exchanger are mounted on slide-out rails.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.godayandnight.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.godayandnight.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115 V) and humidifiers (24 V and 115 V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four position installation capability. Dual certified for one- or two-pipe installation. Features single-stage gas valve and single-stage ignition control. Durable silicon nitride igniters last longer, can withstand high-line voltage, and don’t require voltage regulators. Meets low NOx emissions standards. High temperature limit control prevents overheating. Internal condensate drain system.

Warranty information: 20-year heat exchanger limited; 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.godayandnight.com.

eProduct 186

Dunkirk Boilers

Model: DXL gas boiler

Footprint (in inches): 27 (length) by 11 (width) by 37 (height)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-325-5479 from 8 a.m. to 6 p.m. Eastern time, Monday through Friday.

Technical support materials: Installation manual (PN 240009041) and parts list (PN 240009042).

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Features an advanced Fuel Smart Hydrostat Control with three functions in one control: temperature limit with LED display and easy dial settings; low water cut-off; and boiler reset, which lowers the boiler temperature to save fuel by turning on the burner only when needed.

Warranty information: Cast to Last Warranty is a 20-year non-prorated limited warranty with extended parts and labor warranties available through CornerstoneUnited.

Special installation requirements: Manufacturer did not specify.

Contact: Dunkirk Boilers, 315-797-1310; www.dunkirk.com.

eProduct 187

Model: Helix VLT gas boiler

Footprint (in inches): 14 (length) by 20 (width) by 31 (height)

Serviceability features: Innovative 316L/444 stainless steel fin tube heat exchanger. Built-in primary/secondary piping. Factory wired and installed probe-type low water cut-off. Corrosion resistant CPVC flue collector for long life. Control features plain English display, outdoor reset, priority domestic hot water, and integrated multiple boiler control capability for up to 16 boiler modules. Simplified electrical connections with removable terminal block. Replacement ready with 1-¼-inch piping connections and low pressure drop, no high head pump required. Jacket slides on and off for quick access. Wall mount bracket included.

Technical support: Available at 800-325-5479 from 7 a.m. to 6 p.m. Eastern time.

Technical support materials: Installation and operation manual, repair parts manual, wiring diagrams, service and troubleshooting information all available online at www.dunkirk.com.

Noise-reduction features: Sound attenuation jacket cover with gasket material.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Helix stainless steel vertical laser tube heat exchanger, self-cleaning design, wide smooth waterways that help remove hard water deposits and prevent scaling. Boiler features a built in primary/secondary piping system and heat exchanger pump, as well as corrosion resistant flue collector. Built-in multiple staging boiler capability up to 16 modules. Rated Most Efficient 2012 by Energy Star.

Warranty information: 15-year limited, optional comfort plus parts and labor extended warranties available.

Special installation requirements: Manufacturer did not specify.

Contact: Dunkirk Boilers, 315-797-1310; www.dunkirk.com.

eProduct 188

EarthLinked Geothermal Space Heating & Cooling

Model: SC, SW, and SD direct geoexchange split system heat pump

Footprint (in inches): 24 (length) by 28 (width) by 25 (height)

Serviceability features: Unit features Adaptiv™ refrigerant flow controls, which make system charging simple. Service valves provided to isolate earth loops from compressor unit. SW model includes on-demand domestic water pre-heating. SD model has internally mounted desuperheater that is pre-plumbed and pre-wired to reduce installation time.

Technical support: Available from 8 a.m. to 5 p.m. Eastern time. Authorized dealers have access to after-hours phone support.

Technical support materials: Application and system selection, installation, and service manuals available on website.

Noise-reduction features: Fully insulated cabinet ensures quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Uses highly conductive copper loops to transfer renewable energy from the earth, eliminating the indirect transfer medium found in water loop geo systems.

Warranty information: Five-year compressor and all major components. 20-year earth loops.

Special installation requirements: Sold only through authorized, factory-trained installers.

Contact: EarthLinked Technologies Inc., 863-701-0096; www.earthlinked.com.

eProduct 189

EMI

Model: E-verter ductless split system

Footprint (in inches): Varies.

Serviceability features: Single point power connection is standard (electric heat models require dual point power connection). Application flexibility with 100 feet of interconnect refrigerant piping, supporting 35 feet of elevation difference. Easy access connection for refrigerant gauges.

Technical support: Available at 800-325-5479 from 7 a.m. to 6 p.m. Eastern time.

Technical support materials: Installation operation manuals, which include, wiring diagrams, service/troubleshooting information, installation data, parts and part numbers, specification/submittal sheets.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Bi-flow filter-drier available, MERV 11 filter available on some models.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: 3:1 turndown for increased comfort with decreased temperature swings. Rapid-response two-stage heat via DX turbo-heat and E-boost electric heat technology. Widest selection of Energy Star eligible ductless products.

Warranty information: One-year parts, five-year compressor. Optional 10-year parts and labor.

Special installation requirements: Manufacturer did not specify.

Contact: EMI, 315-797-1310; www.enviromaster.com.

eProduct 190

First Co.

Model: UCXQB DX cooling/heat pump and hydronic air handler

Footprint (in inches): 21 (length) by 22 (width) by 43 (height)

Serviceability features: Allows easy service from front of air handler. Both DX, hot water coil, and blower assembly slide out for easy maintenance and service. Easy access to electrical compartment. Water circulating pump includes serviceable check-valve.

Technical support: Available Monday to Friday, from 8 a.m. to 5 p.m. Central time.

Technical support materials: Specification manual installation/operation manual, replacement parts list available at www.firstco.com. Use model description link.

Noise-reduction features: ECM motor for quiet fan start-ups. Fully insulated cabinet. Rubber-isolated blower motor mounts.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Aquatherm air handler provides standard DX cooling and heat pump operation combined with hot water heating for efficient and comfortable operation in many different applications. This air handler automatically allows for multi-stage/dual fuel heating using heat pump and hot water operation. Also includes a reliable circulating pump for easy application with a standard, gas-fired water heater for efficient, comfortable operation for consumers and application flexibility for engineers and contractors in recessed wall or closet applications. Wall panel accessories also available.

Warranty information: One-year parts.

Special installation requirements: Air handler specified for vertical application and must be located within 100 feet of hot water source.

Contact: First Company, 214-388-5157; www.firstco.com.

eProduct 191

Friedrich

Model: Kühl YL24N35 commercial-grade room heat pump

Footprint (in inches): 36 (length) by 28 (width) by 20 (height)

Serviceability features: Remote access to unit(s) control and maintenance logs: error codes, switches, sensors and unit data: set points, fan speeds, etc. with optional FriedrichLink™ Adapter (KWIFI) accessory and online interface. Built-in firm grip handles and unit’s structural integrity allow it to be removed, cleaned, and maintained outside of its sleeve. Easy-access hinged door for washable antimicrobial air filters. Commercial grade durability stands up to use in demanding commercial and industrial locations.

Technical support: Available Monday through Friday from 7 a.m. to 6 p.m. Central time at 877-599-5665.

Technical support materials: Installation manual, service manual (includes wiring diagrams), and parts manual.

Noise-reduction features: Steel inner wall and extra dense insulation materials block outdoor noise. Vibration isolating design and components diminish traditional operating noise. Precision engineering maximizes airflow while delivering ultra-quiet operation.

IAQ equipment supported: Premium filtration achieves up to a MERV 6 rating with use of optional carbon filter (in addition to standard antimicrobial air filter) to remove odors, ozone and VOCs. Check filter reminder. Superior fresh air intake and stale air exhaust. Washable antimicrobial air filter.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Ability to control units remotely via computer or smartphone with optional FriedrichLink accessory and wireless Internet connection. Multiple units can be grouped and controlled together. Comes with two built-in energy management schedules or create custom seven-day energy management schedules. Multiple schedules can be created and saved RoHS compliant. Smart grid capable.

Warranty information: First year, any part: Friedrich will repair the product at no charge, provided room air conditioner is reasonably accessible for service (additional labor cost may apply). Second through fifth year: sealed refrigeration system (defined as the compressor, condenser coil, evaporator coil, reversing valve, check valve, capillary, filter drier, and all interconnecting tubing), Friedrich will pay a labor allowance and parts necessary for repair (additional costs may apply).

Special installation requirements: Window installation kit (KWIKL) sold separately.

Contact: Friedrich Air Conditioning, 210-546-0500; www.friedrich.com.

eProduct 192

Frigidaire

Model: iQ Drive FT4BG

Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)

Serviceability features: Utilizes an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information, as well as a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Adaptive demand defrost provides additional energy savings in heating by defrosting only when necessary. Five-minute restart time delay when the unit shuts down protects the system.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Features a variable-speed condenser motor, a heavy duty brushless dc motor for long lasting reliability, and swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The matched B6VM air handler or FG7T furnace has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Locks out heat pump heating operation below 0˚F. Suction accumulator provides protection from liquid flood back.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.frigidaire.net.

eProduct 193

Model: R8GD gas pack

Footprint (in inches): 56 (length) by 47 (width) by 35 to 43 (height)

Serviceability features: High- and low-pressure switch, liquid line filter driers, externally accessible service ports, convertible air delivery, wire guard coated with Earth-friendly epoxy and mesh hail guard, low voltage transformer includes 3-amp fuse, corrosion-resistant drain pan, SmartLite™ control board, and hot surface igniter.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Insulation in the blower and heat exchanger compartments.

IAQ equipment supported: Microchannel evaporator coils are all aluminum coils designed to prevent formicary corrosion, optimize heat transfer, minimize size, increase durability and reliability.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Units with microchannel coils are up to 20 percent lighter and use up to 70 percent less R-410A refrigerant charge.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.frigidaire.net.

eProduct 194

GeoComfort

Model: Compass Series GCT geothermal package combination unit

Footprint (in inches): 32 (length) by 30 (width) by 60 (height)

Serviceability features: 360-degree service access through eight separate service panels. All components in easy-to-reach locations. All wiring and controls at eye-level for visibility. All digital controls with individual fault lights for troubleshooting.

Technical support: Technical service and application support available 24 hours by phone.

Technical support materials: All units ship with full installation, operation, and maintenance manuals. Wiring diagrams printed and adhered to primary service panel.

Noise-reduction features: Heavy-gauge steel cabinet. Quadruple compressor isolation. Closed-cell foam insulation.

IAQ equipment supported: On-demand dehumidification mode. All-aluminum microchannel air coil (now across all models as a standard feature). Composite, antimicrobial drain pan with silver-ion technology. Compatible with most aftermarket IAQ systems.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The only geothermal packaged product that ships standard with an all-aluminum microchannel air coil. The unit also features a priority based hydronic heating function for radiant floor or fan coil heating.

Warranty information: Five-year labor, five-year all parts, 10-year compressor. Optional 10/10/10 warranty. Optional lifetime compressor warranty.

Special installation requirements: The only multi-positional geothermal heat pump that can be field converted from left-hand return air to right-hand return air, as well as upflow supply air to downflow supply air (requires optional kit for downflow conversion).

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 195

Model: Compass Series GRT geothermal outdoor split unit

Footprint (in inches): 32 (length) by 39 (width) by 23 (height)

Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Backseating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.

Technical support: Technical service and application support available 24 hours by phone.

Technical support materials: Full technical literature supplied with each unit, including service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.

Noise-reduction features: Heavy-gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.

IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Retrofit installations are simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.

Warranty information: Five-year labor, five-year all parts, 10-year compressor. Optional 10/10/10 warranty. Optional lifetime compressor warranty.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 196

Goodman

Model: GMVC8 gas furnace

Footprint (in inches): 16 (length) by 19 (width) by 33 (height)

Serviceability features: Easy access two-door front service panels, self-diagnostic control boards, ComfortNet system compatible offering service and maintenance reminders and diagnostics.

Technical support: Available at 888-593-9988, by clicking PartnerLink, by viewing DealerFirst Mobile, or by contacting local Goodman brand distributor.

Technical support materials: All technical support documents are available from local Goodman brand distributors, or online at PartnerLink, www.goodmanmfg.com and DealerFirst Mobile.

Noise-reduction features: Modulating gas valve, variable-speed ECM circulator motor, cabinet insulation, two-speed induced draft motor.

IAQ equipment supported: Unit is compatible with all IAQ devices including wireless connections when installed as part of a ComfortNet communicating control system.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Modulation capacity range of 35 to 100 percent, ComfortNet communicating system compatible, award-winning aluminized dual-diameter tubular heat exchanger, and excellent limited unit and parts.

Warranty information: 10-year unit replacement limited, lifetime heat exchanger limited, 10-year parts limited upon qualified registration in applicable jurisdictions.

Special installation requirements: None.

Contact: Goodman Global Group Inc., 713-861-2500; www. goodmanmfg.com.

eProduct 197

Model: GMVM96 gas furnace

Footprint (in inches): 28 (length) by 17 (width) by 41 (height)

Serviceability features: Easy access two front panels, self-diagnostic control boards, ComfortNet system compatible offering service and maintenance diagnostics.

Technical support: Available at 888-593-9988, by clicking PartnerLink, by viewing DealerFirst Mobile, or by contacting local Goodman brand distributor.

Technical support materials: All technical support documents are available from local Goodman brand distributors, or online at PartnerLink, www.goodmanmfg.com, and DealerFirst Mobile.

Noise-reduction features: Modulating gas valve, variable speed circulator and inducer motors, insulated cabinet, precise gas manifold jets.

IAQ equipment supported: Compatible with all IAQ devices including wireless connections when installed as part of a ComfortNet communicating system.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Modulation capacity range of 35 to 100 percent, ComfortNet system compatible, award-winning dual-diameter tubular heat exchanger.

Warranty information: 10-year unit replacement limited, lifetime heat exchanger limited, 10-year parts limited upon qualified registration in applicable jurisdictions.

Special installation requirements: None.

Contact: Goodman Global Group Inc., 713-861-2500; www.goodmanmfg.com.

eProduct 198

Haier

Model: HSU12VHG(DB)-W/G ductless split heat pump

Footprint (in inches): 40 (length) by 12 (width) by 14 (height)

Serviceability features: Auto restart, self-cleaning evaporator, child lock.

Technical support: National service network.

Technical support materials: Installation instructions, wiring diagrams, service manual, technical specifications sheet, submittal sheet, troubleshooting guide.

Noise-reduction features: Inverter technology allows the heat pump to operate at a lower and quieter speed.

IAQ equipment supported: The indoor evaporator section features a high-efficiency, anti-allergen filter that contains activated carbon to aid in the removal of odors. The system also contains a self-cleaning evaporator.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Manufacturer did not specify.

Warranty information: One-year functional parts, five-year
compressor.

Special installation requirements: All local building regulations must be adhered to. The area for the condenser location must be level, easily accessible and installed on a concrete pad and secured securely. For the evaporator unit, install it in a location where the optimal cooling for the area can be achieved.

Contact: Haier America, 917-379-8846; www.haieramerica.com.

eProduct 199

Model: PTHH1201UAC package terminal heat pump

Footprint (in inches): 42 (length) by 14 (width) by 16 (height)

Serviceability features: Built-in self-diagnostics, fits all sleeves, freeze protection, auto restart, universal heater.

Technical support: Nationwide technical service network.

Technical support materials: Installation instructions, wiring diagrams, service manual, troubleshooting guide, technical data brochure, project submittal sheet.

Noise-reduction features: Dual-fan system prevents direct path of outside noise from coming in the room, tangential indoor fan for consistent airflow, direct drive motors with permanent split capacitors, rubber isolators on the compressor to minimize vibration and noise.

IAQ equipment supported: Easy accessible, washable filters, condensate removal system for high humidity areas, built-in outside air damper for ventilation.

Thermostat compatibility: Requires a special thermostat. Wired, wall thermostat included with unit.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The digital control on the unit doubles as a wired wall thermostat. It can be used as is, or easily removed and mounted on the wall. The units feature a universal heater that produces 3 kW heat with a 20-amp cord or 5 kW with a 30-amp cord. A cord ships with each unit.

Warranty information: One-year functional parts and labor for the entire unit. Second through fifth year, parts and labor on the sealed system. Second through fifth year, remaining functional parts only, no labor.

Special installation requirements: A full line of accessories is available.

Contact: Haier America, 917-379-8846; www.haieramerica.com.

eProduct 200

Halcyon

Model: System 9RLS2 split system

Footprint (in inches): 7 (length) by 34 (width) by 11 (height)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 866-952-8324 from 8 a.m. to 8 p.m. Eastern time.

Technical support materials: Online Dealer Toolbox includes operation, service and installation manuals, design and technical manuals, blow-apart parts diagrams, interactive troubleshooting guides, a Btu load calculator, and a variety of additional technical information and drawings.

Noise-reduction features: Features an indoor unit as quiet as a soft whisper – 21 dB. The outdoor unit is 48 dB.

IAQ equipment supported: The Apple Catechin filter absorbs dust, mold spores, and microorganisms by static electricity and growth is inhibited/deactivated. Three- to 12-month life expectancy, depending on environment. The ion deodorizing filter decomposes absorbed odors using the oxidizing/reducing effects of ions. Three-year life expectancy. Wash to restore surface action.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: A highly efficient heat pump with 27.2 SEER. It also features powerful heating at outdoor temperatures down to -5˚F, an energy saving program (ESP), which senses movement in the room and adjusts the temperature accordingly, a programmable remote control, inverter technology, and quiet operation.

Warranty information: Five-year parts and seven-year compressor.

Special installation requirements: None.

Contact: Fujitsu General America, 973-575-0380; www.fujitsugeneral.com.

eProduct 201

Heil

Model: PS92 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Furnace is equipped with easy-to-remove panels and innovative knobs to allow easy door removal and secure attachment. A super-bright LED makes diagnostic flash codes easier to read. For servicing convenience, the entire blower assembly and heat exchanger are mounted on slide-out rails.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.goheil.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.goheil.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115 V) and humidifiers (24 V and 115 V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four position installation capability. Dual certified for one- or two-pipe installation. Features single-stage gas valve and single-stage ignition control. Durable silicon nitride igniters last longer, can withstand high-line voltage, and don’t require voltage regulators. Meets low NOx emissions standards. High temperature limit control prevents overheating. Internal condensate drain system.

Warranty information: 20-year heat exchanger limited; 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.goheil.com.

eProduct 202

Model: QuietComfort® VT 96 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: A super-bright LED makes diagnostic flash codes easier to read. Allows technicians to see last seven stored fault codes even if power is interrupted. Blower assembly is mounted on rails for easy, upfront installation and removal. These new gas furnaces feature large, robust one-quarter turn knobs for easy door installation and removal.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.goheil.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.goheil.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Super-quiet, variable-speed ECM motors minimize operating sound levels. The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Heil furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring function only when used with new Observer™ communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Featuring a communicating control, VT 96 furnaces are built with stainless steel primary and secondary heat exchangers. Two-stage heat and two-stage cooling compatible, furnace has ECM variable-speed blower motor, is designed for four-way multi-position installation, just 35 inches tall and lighter weight than previous counterparts. Meets low NOx emissions standards.

Warranty information: Ten-year No Hassle Replacement limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Parts limited period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoHeil.com.

eProduct 203

Hydron Module

Model: Revolution Series HCT geothermal package combination unit

Footprint (in inches): 32 (length) by 30 (width) by 60 (height)

Serviceability features: 360-degree service access through eight separate service panels. All components in easy to reach locations. All wiring and controls at eye-level for visibility. All digital controls with individual fault lights for troubleshooting.

Technical support: Technical service and application support available 24 hours by phone.

Technical support materials: All units ship with full installation, operation, and maintenance manuals. Wiring diagrams printed and adhered to primary service panel.

Noise-reduction features: Heavy-gauge steel cabinet. Quadruple compressor isolation. Closed-cell foam insulation.

IAQ equipment supported: On-demand dehumidification mode. All-aluminum microchannel air coil (now across all models as a standard feature). Composite, antimicrobial drain pan with silver-ion technology. Compatible with most after-market IAQ systems.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The only geothermal packaged product that ships standard with an all-aluminum microchannel air coil. The unit also features a priority based hydronic heating function for radiant floor or fan coil heating.

Warranty information: 10-year labor, 10-year all parts, lifetime compressor, lifetime cabinet, lifetime heat exchanger (coax). Optional warranty deducts.

Special installation requirements: The only multi-positional geothermal heat pump that can be field converted from left-hand return air to right hand return air, as well as upflow supply air to downflow supply air (requires optional kit for downflow conversion).

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 204

Model: Revolution Series HRT geothermal outdoor split unit

Footprint (in inches): 32 (length) by 39 (width) by 23 (height)

Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Back-seating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.

Technical support: Technical service and application support available 24 hours by phone.

Technical support materials: Full technical literature supplied with each unit, including service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.

Noise-reduction features: Heavy-gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.

IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable-speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Retrofit installations are simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.

Warranty information: 10-year labor, 10-year all parts, lifetime compressor, lifetime cabinet, lifetime heat exchanger (coax). Optional warranty deducts.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 205

Laars Heating Systems Co.

Model: Mascot II wall-hung boiler

Footprint (in inches): Manufacturer did not specify.

Serviceability features: All key parts are accessible after removal of front boiler panel. Burner and combustion chamber are also accessible. Supply and return piping are at the base of the boiler. Boiler includes built-in expansion tank and main, three-speed circulator.

Technical support: Available at 800-900-9276, 8 a.m. to 5 p.m. Eastern time, Monday to Friday.

Technical support materials: All information is available in the installation manual and online (with the serial number for any unit, go to www.laars.com, then select “parts ID”).

Noise-reduction features: Ultra-quiet design.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Modulating-condensing design offers 5:1 turndown. Ideal for new installations or retrofit, offering optional 125 MBtuh flat plate heat exchanger for domestic hot water.

Warranty information: 12-year limited. Two-year parts and labor. If a Mascot II requires more than two warranty service repairs during the first year of operation, Laars will replace the boiler at no charge.

Special installation requirements: As with all condensing equipment, the Mascot II requires PVC or stainless venting.

Contact: Laars Heating Systems Co., 603-834-6802; www.laars.com.

eProduct 206

Model: NeoTherm boiler/volume water heater

Footprint (in inches): 20 (length) by 25 (width) by 38 (height)

Serviceability features: All key parts are accessible after removal of front boiler panel. Burner and chamber are also accessible. Supply and return piping are at the top of the boiler.

Technical support: Available at 800-900-9276, 8 a.m. to 5 p.m. Eastern time, Monday to Friday.

Technical support materials: All information is available in the installation manual and online (with the serial number for any unit, go to www.laars.com, then select “parts ID”).

Noise-reduction features: Ultra-quiet design.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: This is a modulating-condensing unit with 5:1 turndown. Received Energy Star most efficient rating for 2012. Built for reliability. Its zero-clearance requirement makes it ideal for replacement installations.

Warranty information: 12-year limited. Two-year parts and labor.

Special installation requirements: As with all condensing equipment, the NeoTherm requires PVC or stainless venting.

Contact: Laars, 603-834-6802; www.laars.com.

eProduct 207

LG Electronics

Model: Art Cool™ Premier LS090HYV ductless split system

Footprint (in inches): Indoor: 34 (width) by 12 (height) by 9 (depth); Outdoor: 34 (width) by 26 (height) by 13 (depth)

Serviceability features: Indoor unit has a detachable bottom cover, more pipe space, support clip and wider installation mounting plate. Outdoor unit has elevated service valve.

Technical support: Available at 888-865-3026 from 7 a.m. to 7 p.m. Central time.

Technical support materials: Guide specification, submittal, wiring diagram, piping diagram, installation manual, service manual, parts exploded view, owner’s manual.

Noise-reduction features: Low vibration compressor in the outdoor unit with use of a twin-rotary scroll compressor; brushless digitally controlled (BLDC) fan motor and cross-flow fan in the indoor unit.

IAQ equipment supported: Optimized airflow with four-way louver control to reach all spots in a zone. Auto Clean allows 30-minute fan operation after set point satisfaction to dry IDU coil (to avoid mildew growth). Dry mode allows dehumidification in cooling mode based on set point and return air temperature differential.

Thermostat compatibility: Compatible with LG thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Industry leading efficiency from the outdoor unit single suction dc inverter compressor and fan motor and also the indoor unit three-row hybrid heat exchanger and cross-flow fan. Ultra-quiet operation and enhanced airflow. Jet Cool and Jet Heat allow rapid zone conditioning. Stylish design.

Warranty information: Three-year parts, five-year compressor with qualified installation.

Special installation requirements: 208/230-1-60 indoor unit and outdoor unit, 10 MCA, 15 MOP, ¼-inch liquid line, 3/8-inch suction line, 49 feet maximum equivalent piping length, 32 feet maximum elevation difference between outdoor and indoor unit, airflow and service clearances conveyed in installation manual, installation, and service courses available monthly at LG training centers.

Contact: LG Electronics Commercial Air Conditioning U.S.A., 888-865-3026; www.lghvac.com.

eProduct 208

Lochinvar

Model: Knight boiler with Multi Temperature Loop Control (MTLC)

Footprint (in inches): 23 (length) by 16 (width) by up to 42 (height)

Serviceability features: New Smart System™ MTLC is an innovative accessory designed to simplify the integration of Knight boilers into multiple temperature hydronic heating systems. This compact and attractive accessory accurately controls up to three separate space heating loop temperatures, while maximizing the efficiency of the heating boiler as a primary function.

Technical support: Available 800-722-2101 from 8 a.m. to 5 p.m. Central time.

Technical support materials: For the MTLC accessory, product literature and instruction manual are at www.lochinvar.com. For Knight, wiring diagrams, piping diagrams, literature, I&O manual, service manual, user manual, pump recommendations, replacement parts list, product summary, warranty information, plan view drawings, typical spec, technical service, etc., are available at www.lochinvar.com.

Noise-reduction features: No special sound reduction measures are required. The boiler is library quiet.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The Smart System control is a dedicated circuit board that, among many other functions, acts as the thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Heating comfort and energy-efficient boiler operation are the driving forces behind the MTLC accessory. Many of today’s hydronic heating systems are complex in that they distribute heat to as many as three different supply loops plus an indirect water heater, all requiring a unique temperature. MTLC takes the guesswork out of how to control the boiler supply water temperature without sacrificing efficiency.

Warranty information: For Knight, 12-year limited covers the heat exchanger for leakage, thermal shock, or other malfunction caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains installed at its original place of installation.

Special installation requirements: Installation of the MTLC is easily handled through wiring in the terminal strips located on the Knight boiler and control as well as easy setup through the display on the Knight Boiler.

Contact: Lochinvar LLC, 615-889-8900; www.lochinvar.com.

eProduct 210

Model: Strato-Therm+ multi-functional unit (stratified solar tank, indirect water heater, hydronic buffer tank)

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-722-2101, 8 a.m. to 5 p.m. Central time

Technical support materials: Product literature, user manual, replacement parts list, etc., available at www.lochinvar.com.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Equipped with a solar heat exchanger connected to the storage vessel and a corrugated stainless steel coil within the tank, the Strato-Therm+ maximizes heat transfer in a solar thermal system and increases collector performance. A back-up hydronic heat source, such as a Knight boiler, ensures that the storage vessel is at a sufficient temperature to simultaneously generate domestic hot water and meet hydronic heating demands. As demand for space heating is initialized, the Strato-Therm+ acts as a hydraulic separator, decoupling the system demand from the boiler output. The cooler water in the bottom of the tank allows for greater collector efficiency and greater opportunity for solar thermal heat generation.

Warranty information: Limited warranty covers the heat exchanger(s), tank, and component parts for leakage or other malfunction caused by defects in materials and/or workmanship. It extends to the first owner as long as the unit remains installed at its original place of installation. Heat exchanger(s) are warranted against tube leakage for five years; solar storage tanks are warranted against tank leakage for five years; parts are warranted for one year.

Special installation requirements: Manufacturer did not specify.

Contact: Lochinvar, 615-889-8900; www.lochinvar.com.

eProduct 211

Luxaire

Model: Acclimate LP9C modulating gas furnace

Footprint (in inches): 30 (length) by 18 to 25 (width) by 33 (height)

Serviceability features: Compact 33-inch height fits in tight spaces. Easily convertible, multi-position design provides configuration flexibility. Folded sheet metal eliminates sharp edges. Interchangeable doors use toolless quarter-turn knobs for easy removal. Slide-out blower assembly provides easy access. Control board features tri-color LEDs for easy diagnostics. Self-priming internal condensate system eliminates external traps.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request. A unique quick reference set up guide for contractors is provided with every furnace.

Noise-reduction features: Operation is quiet — as low as 65 dB for models up to 98 percent AFUE. An insulated blower compartment ensures quiet operation.

IAQ equipment supported: Variable-speed ECM blowers circulate air for longer time periods. Longer run times provide consistent temperatures and longer periods of air filtering, resulting in cleaner, more comfortable air. External air filters offer maximum flexibility in meeting customer IAQ needs. Compatible with all Luxaire premium IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: This product achieves 97.5 to 98 percent AFUE, qualifying it for Energy Star Most Efficient 2012 designation. The furnaces modulate from 35 to 100 percent in 100 increments. Two-way communications with the system controller provides fault code transmission, increased homeowner options for comfort, and automated configuration capability for contractors.

Warranty information: Lifetime limited both heat exchangers to the original purchaser; a 20-year limited from original installation date to subsequent purchaser. 10-year heat exchanger in commercial applications. Standard five-year limited parts. Extended 10-year limited parts when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Among the easiest furnaces to install today. Smaller height, four-way configuration, multiple venting options, moveable duct connector flanges, no knockouts, internal condensate drain trap, supported blower assembly, controls access, quarter-turn knobs on doors, interchangeable doors, and multiple venting options make this unit easy to install in replacement or new construction applications.

Contact: Johnson Controls, 414-524-5487; www.joinluxaire.com.

eProduct 212

Model: LX Series TM9V040A10MP11 gas furnace

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: Can be easily applied in upflow, horizontal left/right, or downflow installations. Easy access to furnace controls to connect power/control wiring, and no knockouts make installation easier. A fully supported blower ensures easy access and removal of the blower. No external condensate trap is required due to patent-pending design.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request. A unique quick reference setup guide for contractors is provided with every furnace.

Noise-reduction features: Quiet two-stage inducer, burner, and variable-speed ECM blower operation ensure reduced noise as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable-speed ECM fan motors provide more consistent airflow and temperatures, and more options for continuous airflow settings, resulting in increased filtration and improved comfort. Compatible with all Luxaire premium IAQ products.

Thermostat compatibility: A wide selection of compatible thermostats is available to provide optimum performance and features for any installation. An adjustable delay timer allows two-stage operation with a single-stage thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The unit’s narrow width (14.5 inches) allows for easy installation in retrofit applications and areas of limited space. The furnace also features a patent-pending, self-priming internal condensate trap, lower airflow capacity, and multiple configurations. Better heat load matches (input rate of 40,000 Btuh) help avoid oversized equipment selections.

Warranty information: Lifetime limited both heat exchangers to the original purchaser; a 20-year limited from original installation date to subsequent purchaser. 10-year heat exchanger commercial applications. Standard five-year limited parts. Extended 10-year limited parts when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Installation is easy thanks to design features such as narrow 14.5-inch width, minimal conversion for upflow, horizontal or downflow installation, moveable duct connector flanges, no knockouts, internal condensate drain trap, supported blower assembly, venting options, controls access, quarter-turn knobs on doors, and inducer rotation using four screws.

Contact: Johnson Controls, 414-524-5487; www.joinluxaire.com.

eProduct 213

Maytag

Model: iQ Drive PPG2GI gas pack

Footprint (in inches): 56 to 64 (length) by 47 (width) by 47 (height)

Serviceability features: Features an interface control board with two-digit LED to provide system operation status and diagnostic troubleshooting information. Utilizes a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Five-minute restart time delay when the unit shuts down further protects the system.

Technical support: Available at 866-262-9824 (866-2-MAYTAG), Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: Technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The variable-speed blower control board accepts dehumidification requirements from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five cooling capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 12-year parts and 12-year Dependability Promise to replace the whole unit if compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.maytaghvac.com.

eProduct 214

Model: iQ Drive PSH4BG heat pump

Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)

Serviceability features: Utilizes an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information, as well as a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Adaptive demand defrost provides additional energy savings in heating by defrosting only when necessary. Five-minute restart time delay when the unit shuts down protects the system.

Technical support: Available at 866-262-9824 (866-2-MAYTAG), Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Features a variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The matched B6VM air handler or PGC2T furnace has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Inverter-driven compressor provides five capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Locks out heat pump heating operation below 0˚. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 12-year parts and 12-year Dependability Promise to replace the unit if the compressor fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.maytaghvac.com.

eProduct 215

Mitsubishi Electric Cooling & Heating

Model: Single-zone, wall-mounted heat pump (MSZ-FE18NA/ MUZ-FE18NA)

Footprint (in inches): Indoor: 9 (length) by 43 (width) by 13 (height); Outdoor: 13 (length) by 33 (width) by 34 (height)

Serviceability features: Built-in self-diagnostics direct a technician to a specific issue. Convenient front, side, and top panels allow for easy access to serviceable components. Easily accessible filters, no ductwork to keep clean and simple wiring result in minimal maintenance.

Technical support: Available at 877-391-5550 from 8 a.m. to 7 p.m. Eastern time.

Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, submittals and spec sheets are available at www.mitsubishipro.com.

Noise-reduction features: The outdoor unit features a sealed insulated compressor compartment and vibration dampening system. The inverter-driven compressor and variable fan unit typically run at partial speed for lower sound levels.

IAQ equipment supported: System includes washable long-life anti-allergen filters to improve air quality. Fan constantly circulates and filters air.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Hyper-Heating (H2i®) ductless systems change the way people think about heat pumps. They are Energy Star rated while delivering exceptional heating performance, operating at 100 percent capacity at temperatures down to 5˚F and providing over 70 percent heating capacity down to -13˚F without supplemental heat source.

Warranty information: Up to seven-year compressor. Up to five-year parts.

Special installation requirements: Please consult installation manual.

Contact: Mitsubishi Electric Cooling & Heating, 678-376-2900; www.mehvac.com.

eProduct 216

Napoleon

Model: 9700 Series ultimate efficiency gas furnace

Footprint (in inches): 30 (length) by 18 or 23 (width) by 33 (height)

Serviceability features: Easy installation and maintenance, self-diagnostic integrated furnace control is mounted between the blower rails for easy accessibility. Shortest 97-percent-plus furnace on the market, according to the company. Elite communicating thermostat ready. Clear condensate collector to view furnace performance. Patented SureView burner system window, a first in the industry. LED service lights to provide furnace service lighting in both upper and lower compartments.

Technical support: Available at 705-721-1212.

Technical support materials: IOM, user’s manual, technical specifications, etc.

Noise-reduction features: Whisper Quiet™ operation feature, the ECM variable-speed motor with soft start gradually increases speed, reducing the initial rush of air and noise created by conventional motors. Silent-Core cabinet housing is fully insulated with acoustic insulation on all four sides of the lower motor enclosure.

IAQ equipment supported: Upgraded MERV 11 filtration is available, full humidification control available with communicating thermostat. Ultraviolet light enclosed in air exchange compartment for air purification.

Thermostat compatibility: Compatible with most thermostats. Recommend communicating thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: SureView burner window, LED service lights, ECM 2.3 motor, Silent Core insulated blower, UV light system, SS409HP primary tubes, SS302 curved bowfront exterior door, premium black textured powder coat.

Warranty information: The heat exchanger has a lifetime warranty with full replacement for the original owner; all remaining parts have a 10-year warranty.

Special installation requirements: Certified with S636 in PVC and PPE.

Contact: Napoleon Heating & Cooling, 705-721-1212; www.napoleonheatingandcooling.com.

eProduct 217

NuTone

Model: iQ Drive R6GI gas pack

Footprint (in inches): 56 to 64 (length) by 47 (width) by up to 47 (height)

Serviceability features: Features an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information. Utilizes a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Five-minute restart time delay when the unit shuts down further protects the system.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The variable-speed blower control board accepts dehumidification requirements from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five cooling capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.nutonehvac.com.

eProduct 218

Model: R8GD gas pack

Footprint (in inches): 47 (length) by 56 (width) by 35 to 43 (height)

Serviceability features: High- and low-pressure switch, liquid line filter driers, externally accessible service ports, convertible air delivery, wire guard coated with earth-friendly epoxy and mesh hail guard, low voltage transformer includes 3-amp fuse, corrosion-resistant drain pan, SmartLite™ control board, and hot surface igniter.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Insulation in the blower and heat exchanger compartments.

IAQ equipment supported: Microchannel evaporator coils are all aluminum coils designed to prevent formicary corrosion, optimize heat transfer, minimize size, increase durability and reliability.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Units with microchannel coils are up to 20 percent lighter and use up to 70 percent less R-410A refrigerant charge.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.nutonehvac.com.

eProduct 219

Panasonic Air Conditioning Group

Model: E9NKUA ductless split system heat pump

Footprint (in inches): 8 (length) by 34 (width) by 12 (height)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-851-1235 or via email: hvac.service@us.panasonic.com.

Technical support materials: Available at www.panasonic.com/aircon.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Sleek and stylish design with high efficient inverter control.

Warranty information: Seven-year compressor, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: Panasonic Air Conditioning Group, 678-905-3078; www.panasonic.com/aircon.

eProduct 220

Payne

Model: PG8MVA/JVA gas furnace

Footprint (in inches): 29 (length) by 14 to 25 (width) by 33 (height)

Serviceability features: Blower assembly slides out on rails for easy service. Extra-long wiring harness allows technicians to remove blower assembly without disconnecting wires.

Technical support: Support provided through nationwide network of local Payne distributors.

Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, wiring diagram.

Noise-reduction features: Insulated cabinet. Two-stage burner and variable-speed blower motor allow furnace to operate on quieter low-fire and low fan speed most of the time.

IAQ equipment supported: As part of an installed system, compatible with air purifier, humidifiers, ventilators, germicidal UV lamps, and other IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Multi-position design allows installation in upflow, downflow, or horizontal air flow. Vent pipes can run inside cabinet to allow greater installation flexibility in tight spaces. Variable-speed blower motor and two-stage burner operation help improve homeowner comfort by reducing temperature differences between rooms.

Warranty information: Ten-year parts limited and 20-year heat exchanger limited to the original owner with timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Payne Heating & Cooling, 888-417-2963 (888-41PAYNE); www.payne.com.

eProduct 221

Model: PG96VAT gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Blower assembly slides out on rails for easy service. Extra-long wiring harness allows technicians to remove blower assembly without disconnecting wires.

Technical support: Support provided through nationwide network of local Payne distributors.

Technical support materials: Installation and start-up instructions, troubleshooting guide, critical parts list, wiring diagram.

Noise-reduction features: Insulated cabinet. Two-stage burner and variable-speed blower motor allow furnace to operate on quieter low-fire and low fan speeds most of the time.

IAQ equipment supported: As part of an installed system, compatible with air purifier, humidifiers, ventilators, germicidal UV lamps, and other IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Four-way multi-position design allows installation in upflow, downflow, horizontal air flow. Can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. Variable-speed blower motor and two-stage burner operation help improve homeowner comfort by reducing temperature differences between rooms.

Warranty information: 20-year limited heat exchanger, 10-year parts limited to original purchaser upon timely registration. (If not registered within 90 days of installation, the limited warranty period is five years.).

Special installation requirements: None.

Contact: Payne Heating & Cooling, 888-417-2963 (888-41PAYNE); www.payne.com.

eProduct 222

Pridiom

Model: Solar-powered ductless mini-split (PMS129HXS)

Footprint (in inches): 30 (length) by 11 (width) by 23 (height)

Serviceability features: This ductless mini-split is a grid tied solar powered (assisted) heat pump that allows for the entire system except for one PC board to be powered by solar energy. This includes fans, condenser, compressor, etc.

Technical support: Available from 7 a.m. to 7 p.m., Monday to Friday at 855-774-3466 (855-PRIDIOM), option 2 for technical services.

Technical support materials: All support materials including wiring diagrams, troubleshooting and service information, installation data, parts, part procurement, etc., are available to contractors and distributors through technical service.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: The system includes a high-efficiency, washable air filter and Aqua-Krome Gold®. Aqua-Krome Gold is a special coating applied to the fins on the indoor unit designed to shed water and help inhibit the growth of mold, mildew, bacteria, and other microbes that adversely affect indoor air quality.

Thermostat compatibility: Requires a special thermostat. Comes with its own wireless remote control.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: This system has the highest efficiency on the market today and is backed by the best warranty and support in the industry.

Warranty information: Five-year compressor, three-year parts, one-year limited labor.

Special installation requirements: The contractor needs to follow installation instructions provided in installation manual.

Contact: Pridiom Group LLC, 855-774-3466; www.pridiom.com.

eProduct 223

Rheem

Model: ROCB oil furnace (ROCB-072P04F, ROCB-072E04F, ROCB-072P04M and ROCB-072E04M)

Footprint (in inches): 23 (length) by 22 (width) by 45 (height)

Serviceability features: This model gives contractors complete access to eight furnace tubes for faster cleaning. The unit has an option for a front and rear flue, which means contractors can access the unit from either the front or back of the furnace.

Technical support: FAQs, literature, spec sheets, etc., can be accessed at www.rheem.com. Support available at 610-369-1450, Monday through Friday, from 8 a.m. to 5 p.m. Eastern time.

Technical support materials: Specification sheets, warranty information, sales fact sheets, and submittal sheets. Contractors can access these documents via www.rheem.com and Rheem’s Apple iPad app, and they can also be viewed on a smartphone or tablet.

Noise-reduction features: The blower is isolated from the blower compartment to deliver quieter operation. The unit also includes insulating material to reduce blower resonance.

IAQ equipment supported: The operating board on the furnace has the ability to integrate a Rheem electronic air cleaner and humidifier. The board also offers the ability for improved dehumidification.

Thermostat compatibility: The single-stage furnace is compatible with most thermostats; the two-stage furnace requires a special thermostat.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: The ROCB line offers the only oil furnace that features a two-stage burner with a 50 percent turndown ratio. The line has documented fuel savings of 15 to 20 percent, compared to units with a single-stage burner. The ROCB-072-M is the only furnace that has the option of a front and rear flue on the same unit.

Warranty information: Limited lifetime; 20-year heat exchanger; five-year parts.

Special installation requirements: Can be installed as either a chimney vent or a direct vent application.

Contact: Rheem; www.rheem.com.

eProduct 224

Ruud

Model: ROCB oil furnace (ROCB-072P04F, ROCB-072E04F, ROCB-072P04M and ROCB-072E04M)

Footprint (in inches): 23 (length) by 22 (width) by 45 (height)

Serviceability features: This model gives contractors access to eight furnace tubes for easy cleaning. The unit has an option for a front and rear flue, which means contractors can access the unit from either the front or back of the furnace.

Technical support: FAQs, literature, spec sheets, etc., can be accessed at www.ruud.com. Support available at 610-369-1450, Monday to Friday, from 8 a.m. to 5 p.m., Eastern time.

Technical support materials: Specification sheets, warranty information, sales fact sheets, and submittal sheets. Contractors can access these documents via www.ruud.com.

Noise-reduction features: The blower is isolated from the blower compartment to deliver quieter operation. The unit also includes insulating material to reduce blower resonance.

IAQ equipment supported: The operating board on the furnace has the ability to integrate a Ruud electronic air cleaner and humidifier. The board also offers the ability for improved dehumidification.

Thermostat compatibility: The single-stage furnace is compatible with most thermostats; the two-stage furnace requires a special thermostat.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: The ROCB line offers the only oil furnace that features a two-stage burner with a 50 percent turndown ratio. The line has documented fuel savings of 15 to 20 percent, compared to units with a single-stage burner. The line was engineered for quiet, reliable operation, and it has the ability to integrate with Ruud IAQ products for added comfort.

Warranty information: Limited lifetime; 20-year heat exchanger; and five-year parts.

Special installation requirements: The ROCB unit can be installed as either a chimney vent or a direct vent application.

Contact: Ruud; www.ruud.com.

eProduct 225

Senville

Model: MS9A-12HRDN1-BS0W mini-split air conditioner and heat pump

Footprint (in inches): 36 (length) by 9 (width) by 12 (height)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-242-4935, ext. 26, Monday to Friday, 9 a.m. to 5 p.m. Eastern time.

Technical support materials: Service manual, installation manual, wiring diagrams, and parts list are all available on website in PDF format.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Comes equipped with a dehumidification feature. All units also have Fresco Tech filters. The silver ion filter helps kill bacteria and eliminate odors.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Some of the most efficient ductless air conditioners available on the market today while maintaining a low purchase cost. All units are Energy Star and AHRI certified with SEER ratings as high as 19 and HSPF ratings as high as 9.6.

Warranty information: One-year parts, five-year compressor. Call 800-242-4935, ext. 26 for warranty related issues.

Special installation requirements: Units are pre-charged with R-410A. Installation kit includes a 13-foot line set.

Contact: Senville, 514-384-5632; www.senville.com.

eProduct 226

Synergy

Model: Synergy low temperature baseboard

Footprint: Sections available in 1-foot increments from 2 to 8 feet (length) by 3 inches (width) by 9 inches (height)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 413-564-5545.

Technical support materials: Literature and support materials available for download at www.designonline.com.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Hydronic systems featuring Synergy are versatile and easily zoned for individual comfort, while maintaining balanced humidity levels. No fans that can circulate dust and allergens, just cost effective, even heat distribution and temperature regulation.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Low temperature, high-efficiency baseboard radiation is specifically engineered to work with today’s high-efficiency modulating boilers. The low temperature element design and standard hydronic fin-tube construction allow fully condensing and modulating boilers to operate at their maximum potential, resulting in an overall improvement to system efficiency and energy savings, as well as uniform heat throughout the space. Features 18-gauge steel construction, white baked enamel finish, and is for both residential and light commercial settings.

Warranty information: One-year from start-up or 18 months from date of shipment from the factory, whichever occurs first.

Special installation requirements: Installs just like traditional fin-tube radiation. No special tools or techniques required.

Contact: DesignLine, 413-564-5545; www.designlineonline.com.

eProduct 227

Tappan

Model: iQ Drive FT4BG heat pump

Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)

Serviceability features: Utilizes an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information, as well as a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Adaptive demand defrost provides additional energy savings in heating by defrosting only when necessary. Five-minute restart time delay when the unit shuts down to protect the system.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Features a variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The matched B6VM air handler or FG7T furnace has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Locks out heat pump heating operation below 0˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.tappan.net.

eProduct 228

Model: R8GD gas pack

Footprint (in inches): 56 (length) by 47 (width) by 35 to 43 (height)

Serviceability features: High- and low-pressure switch, liquid line filter driers, externally accessible service ports, convertible air delivery, wire guard coated with Earth-friendly epoxy and mesh hail guard, low voltage transformer includes 3-amp fuse, corrosion-resistant drain pan, SmartLite control board, and hot surface igniter.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Insulation in the blower and heat exchanger compartments.

IAQ equipment supported: Microchannel evaporator coils are all-aluminum coils designed to prevent formicary corrosion, optimize heat transfer, minimize size, and increase durability and reliability.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Units with microchannel coils are up to 20 percent lighter and use up to 70 percent less R-410A refrigerant charge.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.tappan.net.

eProduct 229

Tempstar

Model: PS95 gas furnace

Footprint (in inches): 30 (length) by 14 to 25 (width) by 35 (height)

Serviceability features: Sturdy knobs allow service technicians to remove and replace furnace doors with a twist of the wrist. A super-bright LED makes diagnostic flash codes easier to read. Slide-out heat exchanger and blower assembly.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.gotempstar.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.gotempstar.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115 V) and humidifiers (24 V and 115 V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four position installation capability. Direct ignition with silicon nitride igniters that last longer, can better tolerate high-line voltage, and don’t require voltage regulators. Meets California low NOx standards. Dual-certified venting. Internal condensate drain system. High temperature limit control guards against overheating.

Warranty information: 20-year heat exchanger limited; 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.gotempstar.com.

eProduct 230

Model: SmartComfort® VC 97 gas furnace

Footprint (in inches): 30 (length) by 18 to 25 (width) by 35 (height)

Serviceability features: These new gas furnaces feature large, one-quarter turn knobs for easy door installation and removal. A super-bright LED makes diagnostic flash codes easier to read. Blower assembly is mounted on rails for easy, upfront installation and removal. Allows technicians to see last seven stored fault codes even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training is available 24/7/365 online at www.gotempstar.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Product information posted online at dealer website www.gotempstar.com includes product specification sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Variable-speed ECM blower motor reduces operating sound levels. Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger and blower compartments.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Tempstar furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Requires a special thermostat. For self-configuring control to function, must use with new Tempstar Observer™ communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Featuring a communicating control, furnaces are built with stainless steel primary and secondary heat exchangers. Modulating (multi-stage) gas valves allow furnaces to operate on a quieter low-fire setting unless thermostat calls for more fire. Designed for four-way multi-position installation, just 35 inches tall and lighter weight than previous counterparts.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products LLC (ICP), 800-315-4370; www.gotempstar.com.

eProduct 231

TETCO

Model: ES4 Series TCT geothermal package combination unit

Footprint (in inches): 32 (length) by 30 (width) by 60 (height)

Serviceability features: 360-degree service access through eight separate service panels. All components in easy-to-reach locations. All wiring and controls at eye-level for visibility. All digital controls with individual fault lights for troubleshooting.

Technical support: Full technical service and application support by phone.

Technical support materials: All units ship with full installation, operation, and maintenance manuals. Wiring diagrams printed and adhered to primary service panel.

Noise-reduction features: Heavy-gauge steel cabinet. Quadruple compressor isolation. Closed-cell foam insulation.

IAQ equipment supported: On-demand dehumidification mode. All-aluminum microchannel air coil (now across all models as a standard feature). Composite, antimicrobial drain pan with silver-ion technology. Compatible with most aftermarket IAQ systems.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The only geothermal packaged product that ships standard with an all-aluminum microchannel air coil. The unit also features a priority based hydronic heating function for radiant floor or fan coil heating.

Warranty information: Five-year labor, five-year all parts, 10-year compressor (provided by Lennox Parts Plus in 2012). Optional 10/10 warranty. Optional lifetime compressor.

Special installation requirements: The only multi-positional geothermal heat pump that can be field converted from left-hand return air to right-hand return air, as well as upflow supply air to downflow supply air (requires optional kit for downflow conversion).

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 232

Model: ES4-R Series TRT geothermal outdoor split unit

Footprint (in inches): 32 (length) by 39 (width) by 23 (height)

Serviceability features: Easy access to all components through the removable lid. All digital controls feature individual fault LED lights. All panels are removable for service if necessary. Back-seating service valves with service ports. The cabinet also features a high-quality UV-protected powder coat paint.

Technical support: 24-hour technical service and application support by phone.

Technical support materials: Full technical literature supplied with each unit, including service data, performance data, wiring diagrams, and installation instructions. Homeowner’s manual supplied as well.

Noise-reduction features: Heavy-gauge steel cabinet with triple compressor isolation insulates the compressor from the cabinet.

IAQ equipment supported: Compatible with most 24-V air cleaners and other IAQ products. The variable speed ECM blower (MPD Series air handler) is capable of being paired with most aftermarket filtration products.

Thermostat compatibility: Requires a special heat pump thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Retrofit installations are simple by giving the installer ease of unit placement. The standard outdoor kit allows more flexibility for connecting the loop field instead of requiring the connection to be made inside the cabinet. The angled service valves give more access for line set connection.

Warranty information: Five-year labor, five-year all parts, 10-year compressor (provided by Lennox Parts Plus in 2012). Optional 10/10 warranty. Optional lifetime compressor.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 233

Thermaquiet

Model: Thermaquiet DL65-WM and DL145-WM low temperature hydronic fan coil

Footprint (in inches): 24 or 39 (length) by 4 deep (width) by 16 (height)

Serviceability features: Units are controlled through a simple to use integrated microprocessor control platform that continuously monitors room temperatures. Control allows for custom setting overrides and diagnostic and performance LED indicators provide immediate performance feedback.

Technical support: Available at 413-564-5545.

Technical support materials: All literature and support materials available for download at www.designlineonline.com

Noise-reduction features: Uses an engineered fan design with curved impellers as opposed to conventional tangential fans, which just directionally blow air. ThermaQuiet’s fan assembly generates pressure equally in all directions for uniform, precise tempered air distribution to the occupied space. Assemblies are perfectly balanced, ensuring silent operation for the life of the unit.

IAQ equipment supported: Integrated microprocessor control platform continuously monitors room temperatures, minimizing energy consumption while maximizing operating efficiencies. Insta-Heat function overrides the program settings and delivers a boost of heat when needed. The perfect alternative to in-floor radiant systems and much more cost effective. Units also allow for no heat air circulation for passive summer cooling.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Engineered specifically for low-temperature hydronic applications, these fan coils are an ideal complement to today’s high-efficiency condensing boilers, heat pumps, and solar equipment. The sleek European design uses the latest variable speed fan technology to reduce energy consumption by up to 35 percent when compared to traditional heating systems, while providing one of the most efficient heat distribution systems on the market. Integrated microprocessor control platform continuously monitors room temperatures, minimizing energy consumption while maximizing operating efficiencies.

Warranty information: Five years from startup or 68 months from date of shipment from the factory, whichever occurs first.

Special installation requirements: Simple low cost installation. Each unit replaces up to 25 feet of traditional baseboard. Can be oriented any way on the wall.

Contact: Design Line, 413-564-5545; www.designlineonline.com.

eProduct 234

Thermo Pride

Model: Low Profile Low-boy, OL6 oil furnace

Footprint (in inches): 50 (length) by 20 (width) by 35 (height)

Serviceability features: Flame observation door for easy burner flame viewing. Dual cleanouts placed for easy access.

Technical support: Available from 8 a.m. to 5 p.m. Eastern time at 800-348-5130.

Technical support materials: Installation and operation manual with parts and part numbers, P/N MO-483. Technical specifications, P/N PS020017.

Noise-reduction features: The interlocking, insulated, furniture-grade steel cabinet helps retain heat within the furnace and prevents annoying vibrations during operation.

IAQ equipment supported: Dehumidistats, UV air purifiers, media filters, electronic air cleaners, and humidification.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The furnace cabinet is powder coated inside and out after it is formed for a durable tough finish that will ensure long life and a quality appearance. The heart of the furnace is the heat exchanger fabricated of 13-gauge copper coated steel in a unique octagonal shape to increase surface area and optimize heat transfer. The coating helps prevent corrosion for a long lasting unit.

Warranty information: Limited lifetime heat exchanger eliminates the worry of ever having to replace the furnace. Should the home be sold, the warranty will automatically transfer to the new homeowners. Also comes with a Peace of Mind 10-year parts warranty to the original owner.

Special installation requirements: Manufacturer did not specify.

Contact: Thermo Products LLC, 413-642-5670; www.thermopride.com.

eProduct 235

Trane

Model: XL95 gas furnace

Footprint (in inches): 28 (length) by varies (width) by 40 (height)

Serviceability features: Products are designed with exacting specifications and innovative features that wear well over time. Equipment is easy to access and service for better long-term performance and a longer life.

Technical support: Contact local Trane distributor.

Technical support materials: The ComfortSite Intranet for dealers and distributors provides quick access to the most current support materials, including catalog pages, installer guides, service facts, product data, submittals, and owners’ manuals.

Noise-reduction features: The two-stage gas valve will frequently operate in first stage, resulting in less noise as well as lower energy costs. In addition, the variable-speed inducer starts and runs quieter than typical inducers.

IAQ equipment supported: The CleanEffects whole-house air cleaner provides advanced air filtration that removes more dust, pollen, and other irritants from conditioned air for a cleaner, healthier, more comfortable home.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Most two-stage furnaces utilize PSC inducers that are louder, less efficient, and are limited in applications where long vent lengths are required. The XL95 is designed with a variable-speed inducer that runs quieter, more efficiently, and offers vent lengths of up to 200 feet.

Warranty information: Lifetime limited heat exchanger, 10-year limited internal functional parts. If the product is not registered within 60 days of installation, Trane’s base limited warranty terms will apply.

Special installation requirements: None.

Contact: Trane, 903-581-3467; www.trane.com.

eProduct 236

Model: XR16 heat pump

Footprint (in inches): 34 (length) by 37 (width)

Serviceability features: Products are designed with exacting specifications and innovative features that wear well over time. Equipment is easy to access and service for better long-term performance and a longer life.

Technical support: Contact local Trane distributor.

Technical support materials: The ComfortSite Intranet for dealers and distributors provides quick access to the most current support materials — including catalog pages, installer guides, service facts, product data, submittals, and owners’ manuals.

Noise-reduction features: Operates on low speed 80 percent of the time in cooling, which minimizes operating noise levels.

IAQ equipment supported: CleanEffects whole-house air cleaner provides advanced air filtration that removes more dust, pollen, and other irritants from conditioned air for a cleaner, healthier, more comfortable home.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The Climatuff compressor is quiet, efficient, and known throughout the industry for reliability. The proprietary Spine Fin coil is made of aluminum for greater resistance to corrosion and leaks. The patented design provides low air resistance and enhanced heat transfer for efficiency.

Warranty information: 10-year limited internal functional parts. If the product is not registered within 60 days of installation Trane’s base limited warranty terms will apply.

Special installation requirements: None.

Contact: Trane, 903-581-3467; www.trane.com.

eProduct 237

Utica Boilers

Model: TriFire TRB oil boiler

Footprint (in inches): 18 (length) by 18 (width) by 43 (height)

Serviceability features: Features a flexible oil line combined with easy access heat exchanger with dual hinge swing door (right or left mount option), wide flue-ways for easy cleaning, sight glass for flame observation, and removable ¼-inch test port for draft overfire reading.

Technical support: Available at 800-325-5479, 8 a.m. to 6 p.m. Eastern time.

Technical support materials: Installation manual (PN 240009350) and parts list (PN 240009353).

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Features a new 2012-compliant high limit control with LED display, easy to program dial settings, boiler water temperature reset and low water cut-off functionality. Low mass design is eco-friendly, with AFUEs as high as 86.5 percent and low standby losses.

Warranty information: Limited lifetime warranty. Parts and labor extended warranties are available through CornerstoneUnited.

Special installation requirements: Manufacturer did not specify.

Contact: Utica Boilers, 315-797-1310; www.uticaboilers.com.

eProduct 238

Model: UB 90-100 gas boiler

Footprint (in inches): 17 (length) by 29 (width) by 36 (height)

Serviceability features: Easy to install service; junction box provided; removable control panel for quick access; low profile condensate trap reduces internal plumbing of condensate drain lines. Honeywell integrated boiler control with easy-to-read/adjust LED display. High limit aquastat, new compact footprint, stainless steel premix burner with direct spark ignition for reliability. Induced draft blower with adjustable exhaust (front, right side or rear) and compact condensate collection fitting

Technical support: Available from 7 a.m. to 6 p.m. Eastern time at 800-325-5479.

Technical support materials: Installation and operation manual, repair parts manual, wiring diagrams, service and trouble shooting information all available online: www.uticaboilers.com.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: High-efficiency cast aluminum heat exchanger, low pressure drop design doesn’t require any special piping.

Warranty information: Limited 15 years.

Special installation requirements: Manufacturer did not specify.

Contact: Utica Boilers, 315-797-1310; www.uticaboilers.com.

eProduct 239

Viessmann Mfg. Co. (U.S.) Inc.

Model: Vitocrossal 200, CM2 condensing boiler

Footprint (in inches): 73 (length) by 36 (width) by 66 (height)

Serviceability features: All connections accessible from top for easy installation and service; Gas fuel flexibility (NG/LPG/LNG) and high altitude operation up to 10,000 feet with simple electronic conversion.

Technical support: Summer schedule: 8:30 a.m. to 5 p.m. Eastern time; Heating season schedule (Sept 1 to April 30): 8 a.m. to 8 p.m., Monday to Friday; Saturday, Sunday, and holidays, messages checked between 11 a.m. and 4 p.m.

Technical support materials: Technical data manuals, installation, operating and service instructions, wiring diagrams and warranty information are available at www.viessmann.us or www.viessmann.ca.

Noise-reduction features: Thermal insulation around pressure vessel and acoustic insulation inside front panel; boiler operates at less than 45 dB at full output.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Pre-assembled burner with 5:1 turndown ratio; direct/chimney venting (PP(s)/stainless steel) up to 200 feet; low inlet gas pressure (NG) of only 4 inches of water column; large water content extends burner run time and reduces cycling; extremely low water pressure drop through heat exchanger eliminates need for dedicated boiler pump and low-loss header.

Warranty information: Manufacturer did not specify.

Special installation requirements: Low inlet gas pressure requirement (NG) of only 4 inches of water column; no dedicated boiler pump and low-loss header required; gas fuel flexibility (NG/LPG/LNG) with simple electronic conversion. Suitable for high altitude operation up to 10,000 feet; less than 800 lb. completely assembled; fits through standard 30-inch door.

Contact: Viessmann Mfg. Co. (U.S.) Inc., 800-288-0667; www.viessmann.us.

eProduct 240

WaterFurnace

Model: 5 Series (502W12) high temperature hydronic geothermal heat pump

Footprint (in inches): 34 (length) by 26 (width) by 24 (height)

Serviceability features: Removable compressor access panels. Quick attach wiring harnesses are used throughout for fast servicing. High- and low-pressure refrigerant service ports. User interface for diagnostics and commissioning of FX controls.

Technical support: Available at 800-257-5667.

Technical support materials: Brochure, specification, installation instructions, submittal, and other literature available at www.waterfurnace.com.

Noise-reduction features: Insulated and corrosion resistant cabinet. Multi-density laminate lined compressor blankets. Dual isolation compressor mounts. Discharge muffler.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The geothermal solution for boiler replacement. Capable of delivering 150˚F leaving hot water, this system is designed for baseboard radiator systems, underfloor radiant applications, overfloor radiant applications, and fan coils. Large oversized water-to-refrigerant heat exchangers and scroll compressors provide extremely efficient operation that requires less loop than any product on the market.

Warranty information: 10-year parts and labor allowance.

Special installation requirements: None.

Contact: WaterFurnace, 260-478-5667; www.waterfurnace.com.

eProduct 241

Model: 7 Series (700A11) geothermal heat pump

Footprint (in inches): 32 (length) by 26 (width) by 58 (height)

Serviceability features: Aurora Controls with the AID tool provide advanced service diagnostics. Refrigeration service sensors. Energy monitoring and optional performance monitoring. Advanced communication to the VS drive. Insulated divider and separate air handling/compressor access panels permit service testing without air bypass.

Technical support: Available at 800-257-5667.

Technical support materials: Brochure, specification, installation instructions, submittal, and other literature available at www.waterfurnace.com.

Noise-reduction features: Discharge muffler, double isolation mounted compressors, and soft starting variable speed compressors and blower motors; insulated compressor compartment; interior cabinet insulation using ½-inch coated glass fiber; all units include compressor blanket for quiet operation.

IAQ equipment supported: The wide range of capacities allows the 700A11 to provide unmatched humidity control. Also features active dehumidification, which utilizes Aurora controls to optimize the blower for maximum moisture removal.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The geothermal industry’s first fully launched variable capacity residential unit and the only unit to surpass both the 41 EER and 5.3 COP efficiency barriers. These ratings are vastly greater than ordinary conditioning systems and 30 percent higher than current two-stage geothermal heat pumps.

Warranty information: 10-year parts and labor allowance.

Special installation requirements: None.

Contact: WaterFurnace, 260-478-5667; www.waterfurnace.com.

eProduct 242

Westinghouse

Model: iQ Drive FT4BG heat pump

Footprint (in inches): 31 (length) by 31 (width) by up to 45 (height)

Serviceability features: Utilizes an interface control board with two-digit LED to provide system operation, status, and diagnostic troubleshooting information, as well as a patented capacity control algorithm to select the optimum system capacity level. Internal controls monitor system operation to protect the inverter drive and compressor. Adaptive demand defrost provides additional energy savings in heating by defrosting only when necessary. Five-minute restart time delay when the unit shuts down protects the system.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Compressor sound blanket and discharge muffler engineered to significantly reduce unwanted compressor noise. Features a variable-speed condenser motor and a heavy duty brushless dc motor for long lasting reliability. Swept-wing fan blade engineered to provide quiet operation.

IAQ equipment supported: The matched B6VM air handler or FG7T furnace has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor provides five capacities in modulating operation from a two-stage thermostat. The cooling operating temperature range is 50˚ to 125˚F. Locks out heat pump heating operation below 0˚F. Suction accumulator provides protection from liquid floodback.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.westinghousehvac.com.

eProduct 243

Model: R8GDgas pack

Footprint (in inches): 56 (length) by 47 (width) by 35 to 43 (height)

Serviceability features: High- and low-pressure switch, liquid line filter driers, externally accessible service ports, convertible air delivery, wire guard coated with Earth-friendly epoxy and mesh hail guard, low voltage transformer includes 3-amp fuse, corrosion-resistant drain pan, SmartLite™ control board, and hot surface igniter.

Technical support: Available at 800-422-4328, Monday to Friday, 8 a.m. to 4:30 p.m. Central time.

Technical support materials: All technical literature available at www.nordyneu.com.

Noise-reduction features: Insulation in the blower and heat exchanger compartments.

IAQ equipment supported: Microchannel evaporator coils are all-aluminum coils designed to prevent formicary corrosion, optimize heat transfer, minimize size, increase durability and reliability.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Units with microchannel coils are up to 20 percent lighter and use up to 70 percent less R-410A refrigerant charge.

Warranty information: With registration, 10-year parts and 10-year quality pledge to replace the unit if the compressor or heat exchanger fails.

Special installation requirements: None.

Contact: Nordyne, 636-561-7300; www.westinghousehvac.com.

eProduct 244

York

Model: DHQ-24-060 Affinity dual fuel package heat pump

Footprint (in inches): 49 (length) by 47 (width) by 42 (height)

Serviceability features: Features gas/electric service connections, side or bottom, and is easily converted from horizontal to vertical airflow. It also includes a composite, non-corrosive drain pan, external refrigerant pressure ports, full perimeter base rails for fork or crane lifting, easily accessible electrical and control box and protective coil louvers.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request.

Noise-reduction features: The upward airflow carries normal operating noise up and away from the living area, while a rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. The unique formed base pan also aids in sound alterations with its Super-Structure design.

IAQ equipment supported: An ASHRAE 62.2 IAQ composite, double-sloped drain pan, foil-backed mold resistant insulation, and painted blower housing and wheel improve IAQ, along with an optional filter rack with 1-inch filters for single-phase units and a standard 1-inch filter rack on the two-phase product.

Thermostat compatibility: The product operates from a standard heat pump thermostat with two-stage cooling and heating.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The heat pump can be installed in both residential and light commercial applications. It can easily be applied in the side flow configuration for residential applications, yet field converted to be applied in the downflow configuration for roof-mounted applications.

Warranty information: Standard 10-year parts and compressor. 20-year gas heat exchanger (10-year parts depends on proper product warranty registration).

Special installation requirements: None.

Contact: Johnson Controls, 414-524-5487; www.yorkhvacdealer.com.

eProduct 245

Model: LX Series TM9V040A10MP11 gas furnace

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: Can be easily applied in upflow, horizontal left/right, or downflow installations. Easy access to furnace controls to connect power/control wiring, and no knockouts make installation easier. A fully supported blower ensures easy access and removal of the blower. No external condensate trap is required due to patent pending design.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) between 7 a.m. and 5 p.m. Central time.

Technical support materials: Support documents include a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list that are available at www.upgnet.com or by request. A unique quick reference set up guide for contractors is provided with every furnace.

Noise-reduction features: Quiet two-stage inducer, burner and variable speed ECM blower operation ensure reduced noise as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable speed ECM fan motors provide more consistent airflow and temperatures, and more options for continuous airflow settings, resulting in increased filtration and improved comfort. Compatible with all York premium IAQ products.

Thermostat compatibility: A wide selection of compatible thermostats is available to provide optimum performance and features for any installation. An adjustable delay timer allows two-stage operation with a single-stage thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The unit’s narrow width allows for easy installation in retrofit applications and areas of limited space. The furnace also features a patent-pending, self-priming internal condensate trap, lower airflow capacity, and multiple configurations. Better heat load matches (input rate of 40,000 Btuh) help avoid oversized equipment selections.

Warranty information: Lifetime limited both heat exchangers to the original purchaser; a 20-year limited from original installation date to subsequent purchaser. 10-year heat exchanger commercial applications. Standard five-year limited parts. Extended 10-year limited parts when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Installation is easy, thanks to design features such as narrow 14.5-inch width, minimal conversion for upflow, horizontal, or downflow installation, moveable duct connector flanges, no knockouts, internal condensate drain trap, supported blower assembly, venting options, controls access, quarter-turn knobs on doors, and inducer rotation using four screws.

Contact: Johnson Controls, 414-524-5487; www.yorkhvacdealer.com.

eProduct 246

Publication date: 9/10/2012

PDF - 2012 Residential Heating Showcase Product Grid