In addition to the 2012 Commercial Heating Showcase Product Grid (see the PDF link at the bottom of this article), The NEWS spotlights the industry’s latest commercial heating products in the following photo feature. The manufacturers provided us with the brief description of features included with each product. For more information, please contact the manufacturers or their distributors.
Arcoaire
Model: CHS180-240 split system heat pump
Footprint (in inches): 86 (length) by 45 to 67 (width) by 50 (height)
Serviceability features: Comfort Alert® troubleshooting LED fault indicators diagnose system-related malfunctions. Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoArcoaire.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Units are equipped with scroll compressors and include vibration isolation for further enhancement of quiet operation. These units are equipped with suction line accumulators that smooth out refrigerant management during mild ambient conditions and the transitions during defrost operation to substantially reduce sounds associated with the scroll compressors pumping liquid refrigerant.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide demand-controlled ventilation capability.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: All models utilize round copper tube, aluminum plate fin condenser coils. Compressors include overload protection. All units have high-pressure and loss-of-charge protection. Models with optional low ambient control provide cooling operation down to -20˚F.
Warranty information: Five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoArcoaire.com.
eProduct 160
Model: RGS090-180 package gas/electric rooftop
Footprint (in inches): 88 to 116 (length) by 60 to 63 (width) by 41 to 57 (height)
Serviceability features: Units capable of through-the-base or through-the-curb gas line routing. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Exclusive IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoArcoaire.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This ASHRAE 90.1-compliant unit is field-convertible from vertical to horizontal airflow on 7.5- to 12.5-ton models with no special kit. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), and medium and high static indoor fan options. Low-NOx models include stainless steel heat exchangers.
Warranty information: Fifteen-year limited stainless steel heat exchanger, 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: Field accessory supply duct kit required for conversion from vertical to horizontal airflow with 15-ton model only.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoArcoaire.com.
eProduct 161
Bard
Model: I-TEC heat pump
Footprint (in inches): 31 (length) by 47 (width) by 94 (height)
Serviceability features: Designed for over-the-window sill wall penetration. Front and center control panel for easy access to components. Hinged, lockable, removable doors. Modularized construction for transporting through standard doors or in elevators. Can be installed in left or right corners with no modifications. Additional service features include ECM indoor and outdoor motors, high- and low-pressure switches, and non-corrosive drain pans.
Technical support: Available through local Bard distribution network.
Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and digital formats), website.
Noise-reduction features: Two-stage scroll compressor with discharge muffler, double-floating isolation mounting system, and sound muffling cover. Eco-friendly high-performance insulation made from recycled denim. Acoustical sound accessories can be added for even lower operating sound levels as requirements and budgets dictate.
IAQ equipment supported: Energy recovery ventilator and commercial room ventilator options available.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Designed for classroom and other similar applications demanding high efficiency and the lowest possible sound levels. Provides superior IAQ and the ultimate in quiet operation, the company claims. Vented above the sill at window level, the unit is designed to be aesthetically pleasing both indoors and out.
Warranty information: Five-year parts, five-year compressor standard.
Special installation requirements: None.
Contact: Bard Manufacturing Co. Inc., 419-636-1194; www.bardhvac.com.
eProduct 162
Model: T series heat pump
Footprint (in inches): 17 to 22 (length) by 38 to 42 (width) by 70 to 93 (height)
Serviceability features: All service and maintenance performed outside the building, consuming no interior floor space. Additional service features include variable-speed ECM blower motor, high- and low-pressure switches, compressor time delay. Ventilation package options are factory- or field-installed.
Technical support: Available through local Bard distribution network.
Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and digital formats), website.
Noise-reduction features: Acoustical sound accessories can be added for even lower operating sound levels as requirements and budgets dictate.
IAQ equipment supported: A variety of ventilation options include energy recovery ventilator, economizer, commercial room ventilator.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: One of the most efficient wall-mounted heat pumps on the market, with green refrigerant R-410A and special sound reduction technology, and is ideal for new construction, modular applications, school modernization, telecommunication structures and more, said the company.
Warranty information: Five-year parts, five-year compressor standard.
Special installation requirements: None.
Contact: Bard Manufacturing Co. Inc., 419-636-1194;
www.bardhvac.com.
eProduct 163
Benchmark
Model: BMK 6000 boiler
Footprint (in inches): 108 (length) by 34 (width) by 79 (height)
Serviceability features: Can be serviced via the front or top of the boiler, as well as the side. The flexibility allows units to be configured side by side.
Technical support: Provided by local manufacturers’ representatives (visit www.aerco.com and click on “How to Buy” tab to find rep). Advanced product support available at 800-526-0288 option 1, or 845-580-8000 option 1, between 8 a.m. and 5 p.m. Eastern time. Product training and online resources are also available for customers and users.
Technical support materials: Literature and performance data, sizing and application guidelines, product and component drawings, installation and piping drawings, controls, specifications, certifications/approvals, warranty.
Noise-reduction features: Optional exhaust mufflers for sound-sensitive applications.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The most compactly designed 6 million-Btuh boiler in the market, the company said. It’s equipped with new features for O2 monitoring, optional O2 trim, venting and air intake flexibility, and is capable of variable-flow primary piping.
Warranty information: Lifetime warranty against thermal shock and 10-year prorated against condensate corrosion and manufacturing defects of heat exchanger.
Special installation requirements: Because of its size, it is perfect for both retrofit and new construction that require one or multiple 6 million-Btuh boilers, said the company.
Contact: AERCO International, 845-580-8000; www.aerco.com.
eProduct 164
Bryant
Model: Legacy Series 575J07-12 split system heat pump
Footprint (in inches): 59 (length) by 46 (width) by 42 to 50 (height)
Serviceability features: Similar design as other Bryant rooftops and split systems for easy familiarization. Units have Comfort Alert® controls for troubleshooting and diagnostics. Large organized control boxes, standardized components, a central control command center which centralizes wiring into one convenient location; handled, easy-access panels; no-strip screw technology.
Technical support: Supported by local Bryant sales office.
Technical support materials: Product data; wiring diagrams; service, controls, and commissioning manual; installation instructions; and critical parts lists.
Noise-reduction features: Rigid base rails, prop condenser fans, and isolated scroll compressors.
IAQ equipment supported: Matching air handler has integrated economizers with multiple sensor options, 2-inch filters, and multiple fan performance capabilities.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Complete offering in sizes, operation, and options makes it an ideal solution for the replacement or new construction markets, the manufacturer said. Units come standard with dependable time/temp defrost controls and suction line accumulator.
Warranty information: Five-year limited standard compressor and one-year all other parts. Optional extended warranties are available.
Special installation requirements: None. TXV and suction line accumulator are standard on each unit and require no field installation.
Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.Bryant.com.
eProduct 165
Model: Preferred Series 581J08-14 package rooftop
Footprint (in inches): 88 to 116 (length) by 60 to 63 (width) by 49 to 57 (height)
Serviceability features: Similar design as other Bryant rooftops for easy familiarization. Units have large organized control boxes, standardized components, a central control command center which centralizes wiring into one convenient location; handled, easy-access panels; no-strip screw technology; and a removable service plug which simplifies taking refrigerant pressures.
Technical support: Supported by local Bryant sales office.
Technical support materials: Product data; wiring diagrams; service, controls, and commissioning manual; installation instructions; as well as critical parts lists.
Noise-reduction features: Insulated cabinet, prop condenser fans, and isolated scroll compressors.
IAQ equipment supported: Integrated economizers with multiple sensor options, 2-inch filters, multiple fan performance capabilities, and Perfect Humidity® dehumidification system.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Complete offering in sizes, operation, and options makes it an ideal solution for the replacement market, said the company. Many models are capable of fitting on past Bryant roof curbs dating back to the late 1980s without changing utility connection or duct connections. This provides time and financial savings.
Warranty information: Five-year standard limited compressor, 10-year aluminum gas heat exchanger (15-year stainless steel), and one-year all other parts. Optional extended warranties are available.
Special installation requirements: None.
Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.Bryant.com.
eProduct 166
Carrier
Model: AquaForce® 30XW screw chillers
Footprint (in inches): 121 to 160 (length) by 44 to 48 (width) by 71 to 79 (height)
Serviceability features: This heat reclaim chiller provides simultaneous heating and cooling and significant energy savings when compared to a standard cooling and boiler system, claims the manufacturer.
Technical support: Supported by local Carrier sales office and 800-227-7437 (800-CARRIER).
Technical support materials: Product data sheets.
Noise-reduction features: Noise-reduction blankets and sound enclosures are available options.
IAQ equipment supported: Benefits of a water-cooled chiller and boiler in one package for applications requiring simultaneous heating and cooling.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Different than most commercial heating products because it is a chiller that can supply hot water up to 140˚F.
Warranty information: Standard one-year with options for extended warranties up to five years available.
Special installation requirements: Discuss with local Carrier sales personnel.
Contact: Carrier Corp., 800-946-2930; www.carrier.com.
eProduct 167
Model: WeatherExpert™ 48LC04-06 package rooftop
Footprint (in inches): 74 (length) by 47 (width) by 33 (height)
Serviceability features: Simple conventional electromechanical, DDC, or ComfortLink™ controls with a scrolling marquee for easy service diagnostics and setup; no pressure gauges are needed. Large control box, optional hinged panels; central control center with wiring points in one location, plus handled access panels.
Technical support: Supported by local Carrier sales office and 800-227-7437 (800-CARRIER).
Technical support materials: Online product training, product data, wiring diagrams; service, controls, and commissioning manual; installation instructions; as well as critical parts lists. Carrier Commercial Replacement Experts Program. Carrier University also provides excellent training programs.
Noise-reduction features: Units as low as 76 dB with fully insulated cabinet, direct or belt-drive fan, scroll compressors, and rigid full-perimeter base rails.
IAQ equipment supported: Fully tested and integrated fresh air economizer with multiple sensor options and integrated CO2 sensor for demand control ventilation capability. Power exhaust for building pressure control. Units have 2-inch filters furnished and cleanable, foil-faced insulation is optional.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The up to 17.5 SEER units use the same footprint as units designed back in 1989, when SEER was 9.3. This improves replacement installation and cost control. Units also operate up to 125˚F ambient temperatures.
Warranty information: Five-year limited standard compressor, three-year ComfortLink controls, 10-year aluminum gas heat exchanger (15-year stainless steel) and one-year all other parts. Optional extended warranties are available.
Special installation requirements: None. Units come standard with TXV metering device.
Contact: Carrier Corp., 800-946-2930; www.carrier.com.
eProduct 168
Century
Model: VMH36SC ductless mini-split system
Footprint (in inches): Indoor: 57 (length) by 11 (width) by 13 (height)
Serviceability features: Error codes on LED display help diagnose problems. Cover of inside unit is easily removed for access to components. Service ports on outdoor condenser are located on side of unit for accessibility.
Technical support: Available at 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives around the United States and Canada can also provide assistance; their contact information is shown on the website under “Where to Buy.” Mini-split training can also be scheduled (subject to availability).
Technical support materials: Comprehensive installation/operation/maintenance manual, service manual with wiring diagrams, troubleshooting charts, etc. For the consumer, an owner’s manual and a separate remote control manual guide operation of the unit. These are packed with the unit and can be viewed or downloaded from the website, or they can be emailed upon request. IOM and service manuals are available on the website to contractors/installers.
Noise-reduction features: Inverter units are inherently quiet because the dc compressor runs at low RPMs most of the time, and the high-tech fan delivers balanced airflow for ultra-quiet operation. Also, the operational sound of the compressor is kept outside with the condensing unit. Indoor sound level is just 50 dBa or less, depending on fan speed.
IAQ equipment supported: Multistage filtration includes ionizer to remove microscopic particles; active carbon and dust filter, and freshening filter. Both the air filter and the freshening filter can be removed, cleaned, and reused. Because the unit runs at low frequency most of the time, there is little on-off cycling, allowing air to be pulled almost constantly across the filters for enhanced IAQ.
Thermostat compatibility: Built-in thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: High wall-mount mini-split has the capacity to heat and cool a large room or office; multiple units can be used for exceptionally large spaces such as common areas. Indoor unit features slim profile and neutral color case. With multiple modes for heating, cooling, dehumidification only, plus sleep and turbo modes. Low ambient operation allows cooling from 5˚ to 122˚F. Random swing continually adjusts fan speed and air direction for a gentle, breeze-like effect.
Warranty information: Six-year compressor, two-year parts; some limitations apply including registration within 90 days of purchase; see printed warranty on website or packed with unit for details. AssurancePlus extended service agreements are available — contact a Century representative for details; contact information found on website under “Where to Buy.”
Special installation requirements: Power comes from the outdoor unit, so no special wiring or outlet is needed for the indoor unit. IOM provides detailed instructions including location selection, as well as minimum/maximum line set lengths and elevations. Recommended indoor-outdoor cable is 14AWG/4 conductor, 600V THHN unshielded stranded bare copper.
Contact: Century, 517-787-2100; www.century-hvac.com.
eProduct 169
ClimateMaster
Model: Tranquility® 22 two-stage compact (TY) Series water-source and geothermal heat pump
Footprint (in inches): 22 (length) by 22 (width) by 40 (height)
Serviceability features: iGate™ communicating control provides advanced unit functionality and comprehensive configuration, monitoring, and diagnostic capabilities. The TY also has an easy-to-remove blower housing for quick service and easy-access control box.
Technical support: Available at 405-745-6000.
Technical support materials: All wiring diagrams, installation instructions, and submittals available online.
Noise-reduction features: Dual compressor vibration isolation and sound absorbing glass fiber for quiet operation.
IAQ equipment supported: Optional MERV 8 and 13 air filters.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: Exceeds ASHRAE 90.1 efficiencies with two-stage operation and uses EarthPure® zero ozone depletion refrigerant. With one of the smallest cabinets in the industry, the TY will easily fit into tight spaces, making it backward compatible with thousands of older water-source heat pumps, the company claims. The TY also has iGate™ technology, which makes this series easy to install and service.
Warranty information: Standard limited coverage of 18 months from time of shipment or 12 months from startup, whichever comes first. Optional warranties include four-year control board, four-year compressor, and four-year refrigerant.
Special installation requirements: Manufacturer did not specify.
Contact: ClimateMaster, 405-745-6000; www.climatemaster.com.
eProduct 170
Comfort-Aire
Model: InverterFlex VMC12 Series mini-split heat pump ceiling cassette
Footprint (in inches): Indoor: 23 (length) by 23 (width) by 10 (height)
Serviceability features: Self-diagnostics simplify installation and help identify operational problems. Cover panel of indoor cassette is easily removed for access to components; simple plug-in connects panel to cassette. Service ports on outdoor unit are located for easy access.
Technical support: Available at 517-787-2100 weekdays from 8 a.m. to 5 p.m. Eastern time. Sales representatives around the United States and Canada can also provide assistance; contact information is on website under “Where to Buy.” In-depth mini-split training can be scheduled.
Technical support materials: Comprehensive installation/operation/maintenance manual, an owner’s manual with troubleshooting instructions; a complete parts list is also available. These can be viewed or downloaded from the website, or they can be emailed upon request.
Noise-reduction features: Inverter units are inherently quiet with high-tech fan; sound level is rated at just 40 dBA or lower. Also the operational sound of the compressor is kept outside with the condensing unit.
IAQ equipment supported: Indoor unit cycles last longer than non-inverter models (running at low speed most of the time), which means air is being pulled across the filter for longer periods, resulting in improved IAQ. The 360-degree airflow reduces stratification.
Thermostat compatibility: Wired wall thermostat and remote control.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: Mix-and-match InverterFlex system allows conditioning of up to four rooms with one outdoor condenser. Ceiling cassettes can be used singly, in multiples, or combined with high wall-mount indoor units, to the maximum capacity of the condenser. There are nine possible combinations from 12,000 to 36,000 Btuh. Low ambient operation allows cooling down to 5˚F. Multiple modes include heating, cooling, air circulation, dehumidification only (indoor units must run in same mode). Cassette is sized to fit in standard 24-inch drop ceiling opening; low-profile panel is ordered separately.
Warranty information: Six-year compressor, two-year parts with registration within 90 days of purchase; some limitations apply, see printed warranty online or packed with unit. AssurancePlus extended service agreements are available; details on website or from a Comfort-Aire representative.
Special installation requirements: IOM explains line set length requirement; there are both minimum and maximum lengths and elevations. Recommended indoor-outdoor connecting cable is 14 AWG/4 conductor 600V THHN unshielded stranded bare copper. Power comes from outdoor unit so no special indoor wiring or outlets are needed, other than wired wall thermostat.
Contact: Comfort-Aire, 517-787-2100; www.comfort-aire.com.
eProduct 171
Comfortmaker
Model: RGS210-303 package gas/electric unit
Footprint (in inches): 128 to 142 (length) by 87 (width) by 49 to 57 (height)
Serviceability features: Units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Exclusive IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoComfortmaker.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Dedicated vertical or horizontal airflow duct configuration models. This ASHRAE 90.1-compliant unit features high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium. and low), stainless steel heat exchangers, and high-static indoor fan option. Other options include liquid propane/high altitude kits.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoComfortmaker.com.
eProduct 172
Model: RHS120 package heat pump
Footprint (in inches): 88 (length) by 60 (width) by 49 (height)
Serviceability features: Units feature through-the-base utility connections capability. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoComfortmaker.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans. Fully insulated cabinet.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This ASHRAE 90.1-compliant unit is convertible from downflow to horizontal. It features high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options available, including medium and high static indoor fan options. Fixed orifice metering devices on all models to precisely control refrigerant flow.
Warranty information: Five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoComfortmaker.com.
eProduct 173
Daikin McQuay
Model: Rebel DPS package rooftop cooling and heat pump
Footprint (in inches): Up to 58 (length) by up to 97 (width) by up to 55 (height)
Serviceability features: MicroTech® III controller with Open Choices™ operates with BACnet® or LonMark® communications for easy integration, diagnostic, and serviceability with BAS, 2- and 4-inch slideout filter racks, low-maintenance direct drive ECM fan motors, dependable variable-speed inverter scroll compressor, hinged access doors for easy access, and cleanable double-wall foam-injected panels.
Technical support: Local service available in all major cities.
Technical support materials: Installation manual, operation manual, catalog, brochure, FAQs, certifications, wiring diagrams, specification guide, installation diagrams, curb drawings.
Noise-reduction features: Patented ultra-quiet Daikin condenser fans, enclosed compressor operation, variable-speed motors, double-wall R-7 foam-injected panels.
IAQ equipment supported: Stainless steel double-sloped drain pan, 100 percent outdoor air option, modulating hot gas reheat dehumidification control, and cleanable double-wall construction.
Thermostat compatibility: Compatible with most thermostats. Requires a two-wire space sensor; two-wire remote user interface is optional.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: First AHRI-certified VAV air-to-air heat pump, first 3- to 12-ton rooftop/heat pump with variable-speed inverter scroll compressors, first to meet and exceed DOE rooftop challenge, first AHRI-certified 20.6 IEER rooftop unit, first rooftop unit incorporating ECMs on all fans, seamless top panel, and 100 percent dedicated outdoor air system available, the company said.
Warranty information: Normal Daikin McQuay warranties apply.
Special installation requirements: All components are factory-installed except the space sensor and optional static pressure sensing tubes.
Contact: Daikin McQuay; www.daikinmcquay.com.
eProduct 174
Day & Night
Model: RGH181-303 package gas/electric rooftop
Footprint (in inches): 128 to 142 (length) by 86 (width) by 49 to 57 (height)
Serviceability features: IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic and energy-saving indoor fan motor delay. All connections and troubleshooting points located in one convenient place: the easy-access master terminal board. Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screw feature.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at the dealer website www.GoDayandNight.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide demand-controlled ventilation capability.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star-qualified units feature dedicated vertical or horizontal airflow duct configuration models, high- and low-pressure switches, and scroll compressors. Units feature two-stage cooling with independent circuits and control. Factory-installed options include medium and high static indoor fan and economizer options.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger; 10-year limited aluminized stainless steel heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoDayandNight.com.
eProduct 175
Model: RHH120 package heat pump
Footprint (in inches): 116 (length) by 63 (width) by 57 (height)
Serviceability features: Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Large laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easier.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoDayandNight.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans. Fully insulated cabinet.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star-qualified unit is convertible from downflow to horizontal. It features high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options available, including medium and high static indoor fan options. Fixed orifice metering devices on all models to precisely control refrigerant flow.
Warranty information: Five-year limited compressor; one-year limited all other parts.
Special installation requirements: Field accessory supply duct kit required for conversion from vertical to horizontal airflow.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoDayandNight.com.
eProduct 176
EarthLinked Commercial Water Heating
Model: CWH-048 and CWH-072 direct GeoExchange with split system heat pump
Footprint (in inches): 17 (length) by 21 (width) by 29 (height)
Serviceability features: Unit features Adaptiv™ refrigerant flow controls, which make system charging simple. Service valves are provided to isolate earth loops from compressor unit.
Technical support: Available for installation/service from 8 a.m. to 5 p.m. Eastern time. Authorized dealers have access to after-hours phone support.
Technical support materials: Application and system selection, installation, and service manuals available on website.
Noise-reduction features: Fully insulated cabinet, no outdoor fan.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Uses highly conductive copper loops to transfer renewable energy from the earth, eliminating the indirect transfer medium found in water loop geo systems.
Warranty information: Five-year compressor and refrigerant flow controls. Twenty-year earth loops.
Special installation requirements: Sold only through authorized, factory-trained installers.
Contact: EarthLinked Technologies Inc., 863-701-0096; www.provenenergysavings.com.
eProduct 177
The Fulton Companies
Model: Caliber (CAL) condensing hydronic boiler
Footprint (in inches): 29 (width) by 51 (height)
Serviceability features: Provides easy access to key components for maintenance, a well-organized electrical panel with neatly laid out wiring, and installation with minimal side clearance between units.
Technical support: Available 24 hours a day at 315-298-5121.
Technical support materials: All supporting documentation can be found at www.fulton.com, or call 315-298-5121.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Requires a special thermostat. Modbus communication.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This design has many of Fulton’s tried-and-true aspects, making it a superior choice, the company claims. The Caliber is ideal for light commercial building heating, said the company. The coiled stainless steel water tube heat exchanger allows for a compact footprint and overall low product mass.
Warranty information: Ten-year thermal shock, five-year pressure vessel/heat exchanger, 12- to 18-month parts. Restrictions apply. See www.fulton.com for details.
Special installation requirements: Applicable jurisdictional installation requirements apply.
Contact: The Fulton Companies, 315-298-5121; www.fulton.com.
eProduct 178
Model: Reliance (REL) copper finned tube boiler
Footprint (in inches): 29 to 42 (length) by 24 to 34 (width) by 45 to 72 (height)
Serviceability features: With its integrated controls, personnel are provided with a wide range of service and maintenance data. The controller features an easy-to-use touchscreen interface, making adjustments and setup convenient and intuitive. All boiler components are located in the rear of the boiler and are clearly labeled. Access to key components from the front, rear or top of the boiler facilitates 1-inch side clearance installations.
Technical support: Available 24 hours at 315-298-5121.
Technical support materials: All supporting documentation can be found at: www.fulton.com or call 315-298-5121.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Requires a special thermostat. ModBus communication.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Offers up to 88 percent thermal efficiency, full modulation with 5:1 turndown, <9 ppm NOx emissions, and integrated sequencing controls for up to eight boilers. The color touch-screen display has an extensive lineup of capabilities including pump control, freeze protection, stack temperature monitoring, and complete boiler operation monitoring. Customers can create hybrid boiler systems using Fulton products, incorporating condensing and noncondensing boilers in the same hydronic loop for a balance of efficiency
and cost-effectiveness.
Warranty information: Ten-year thermal shock, one-year parts, five-year material and workmanship. Restrictions apply. See www.fulton.com for details.
Special installation requirements: Applicable, jurisdictional installation requirements apply.
Contact: The Fulton Companies, 315-298-5121; www.fulton.com.
eProduct 179
Goodman
Model: CPG package unit
Footprint (in inches): 133 (length) by 88 (width) by 50 (height)
Serviceability features: Single side access panels, compressor located outside of condenser coil, contactors with lugs, high- and low-pressure switches, high-capacity steel-cased filter drier.
Technical support: Available at 888-593-9988; clicking PartnerLink; viewing DealerFirst Mobile; or contacting local Goodman distributor.
Technical support materials: All technical support documents are available from local Goodman distributors; online at PartnerLink; www.goodmanmfg.com; and DealerFirst mobile.
Noise-reduction features: Scroll compressor, cabinet insulation, sound-reducing unit top.
IAQ equipment supported: Compatible with all IAQ devices applicable to packaged products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: Award-winning dual-diameter tubular heat exchanger combined with excellent product warranty.
Warranty information: 20-year heat exchanger limited upon qualified registration in applicable jurisdictions and five-year parts limited.
Special installation requirements: No special installation requirements are associated with this product.
Contact: Goodman Global Group Inc., 713-861-2500; www.goodmanmfg.com.
eProduct 180
Model: CPH package unit
Footprint (in inches): 99 (length) by 61 (width) by 52 (height)
Serviceability features: Single-side, single-point entry panels, compressor located outside of condenser coil, contactors with lugs, high-capacity steel-cased filter drier, built-in filter racks.
Technical support: Available at 888-593-9988; clicking PartnerLink; viewing DealerFirst Mobile; or contacting local Goodman distributor.
Technical support materials: All technical support documents are available from local Goodman distributors; online at PartnerLink; and at www.goodmanmfg.com.
Noise-reduction features: Cabinet insulation, compressor isolation components, scroll compressor.
IAQ equipment supported: Compatible with all IAQ devices applicable to packaged products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Outstanding adaptability to fit on a wide range of existing roof curbs, convertible airflow.
Warranty information: Five-year parts limited.
Special installation requirements: No special installation requirements are associated with this product.
Contact: Goodman Global Group Inc., 713-861-2500; www.goodmanmfg.com.
eProduct 181
Greenheck
Model: Model RVE package rooftop ventilator
Footprint (in inches): 117 to 205 (length) by 81 to 100 (width) by 58 to 82 (height)
Serviceability features: Stainless steel hinged access doors are easy lift-off doors with quarter-turn latches. The total energy wheel can slide out for easy access and has removable segments for easy cleaning. Large access doors with stainless steel hinges and air handler quarter-turn latches. Total enthalpy energy wheel slides out of the unit for easy access, along with removable segments for easy cleaning. Large control center with low-voltage terminal strip for connection to control devices.
Technical support: Find a local representative at www.Greenheck.com, click on “Find My Rep,” or call 715-359-6171, Monday to Friday from 8 a.m. to 5 p.m.
Technical support materials: Installation, operation, and maintenance manuals are sent with each unit. A wiring diagram is attached to the inside of the control center door of each unit.
Noise-reduction features: Quiet operating hermetic scroll-type compressors available. Plenum supply and exhaust fan have 12-bladed design for quiet operation.
IAQ equipment supported: Double-sloped insulated drain pan prevents microbial growth from moisture buildup and ensures all condensate drains properly. Two-inch double-wall construction creates a barrier between the cabinet insulation and the supply airstream, protecting the unit insulation from erosion and unit condensation. High-efficiency filtration blocks airborne debris and increases the quality of the supply air volume.
Thermostat compatibility: Room temperature and humidity sensors.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: Designed to handle high percentages (20 to 100 percent) of outdoor air, which is much larger, compared with the standard commercial air conditioning system. Outdoor air conditions require this unit to have high cooling capacity, high turndown capability, and modulation on the heating and cooling systems.
Warranty information: Up to 10 years. Any units or parts that prove defective during the warranty period will be replaced at manufacturer’s option when returned to the factory, transportation prepaid. One-year motors (warranted by motor manufacturer). Should motors furnished by Greenheck prove defective during this period, they should be returned to the nearest authorized motor service station. Greenheck will not be responsible for any removal or installation costs.
Special installation requirements: Manufacturer did not specify.
Contact: Greenheck Fan, 715-359-6171; www.greenheck.com.
eProduct 182
Heatco Inc.
Model: HD Series stainless steel gas-fired duct heaters
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Manufacturer did not specify.
Technical support: Manufacturer did not specify.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: Stainless steel construction. Ten-year warranty. A 5 to 1 modulation option.
Warranty information: Ten years.
Special installation requirements: Manufacturer did not specify.
Contact: Heatco Inc., 800-554-1007; www.heatcousa.com.
eProduct 183
Heil
Model: RGS210-303 package gas/electric unit
Footprint (in inches): 128 to 142 (length) by 87 (width) by 49 to 57 (height)
Serviceability features: Units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Exclusive IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoHeil.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Dedicated vertical or horizontal airflow duct configuration models. This ASHRAE 90.1-compliant unit features high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, low), stainless steel heat exchangers and high static indoor fan option. Other options include liquid propane/high altitude kits.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoHeil.com.
eProduct 184
Model: RHS181-243 package heat pump
Footprint (in inches): 128 to 142 (length) by 86 (width) by 49 (height)
Serviceability features: Units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Large laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoHeil.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Dedicated vertical or horizontal airflow duct configuration models. ASHRAE 90.1-compliant unit features loss of charge, freeze protection, and high-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options available, including medium and high static indoor fan option.
Warranty information: Five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoHeil.com.
eProduct 185
Hydrotherm
Model: KN Series 1.6 and 2.6 gas boiler
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Manufacturer did not specify.
Technical support: Available at 413-564-5515.
Technical support materials: All installation and operation manuals, literature and support information available online at www.hydrothermkn.com.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: A true condensing cast iron boiler. Specially designed to generate 200,000 to 3,000,000 Btuh and adapt to changes in the operating environment, with minimal moving parts and a small footprint, while retaining ultra-high efficiency of up to 99 percent. Boilers utilize HeatNet, an integrated boiler control platform that constantly monitors the boilers for maximum performance. Designed for long life, the wall thickness of the KN cast iron heat exchanger is five times that of stainless steel and aluminum.
Warranty information: For the original owner at the original installation site, the heat exchanger of the boiler will be free from defects in material or workmanship for 10 years from the date of shipment from the factory. Five-year full warranty. Prorated years six to 10. Additional 21-year thermal shock on heat exchanger.
Special installation requirements: Manufacturer did not specify.
Contact: Hydrotherm, 413-564-5515; www.hydrothermkn.com.
eProduct 186
ICP Commercial
Model: RGH060 package gas/electric
Footprint (in inches): 74 (length) by 47 (width) by 41 (height)
Serviceability features: IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic and energy-saving indoor fan motor delay. All connections and troubleshooting points located in one convenient place: the easy-access master terminal board. Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screw feature.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at the dealer website www.GoICPCommercial.com includes product specification sheets, installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide demand-controlled ventilation capability.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star-qualified units feature field convertible airflow, high- and low-pressure switches. Single-stage cooling, two-stage gas heat. Factory-installed options include three heat options (high, medium, low), medium and high static indoor fan option. Other market-driven options such as liquid propane/high altitude kits are available.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger; 10-year limited aluminized stainless steel heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoICPCommercial.com.
eProduct 187
Model: RGH090-150 package gas/electric unit
Footprint (in inches): 88 to 116 (length) by 60 to 63 (width) by 49 to 57 (height)
Serviceability features: IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points are located in one convenient place: the easy-access master terminal board. Units feature through-the-base utility connections capability. Access panels have easy-grip handles and no-strip screw feature.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoICPCommercial.com includes product specification sheets, installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide demand-controlled ventilation capability.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy Star-qualified units feature field-convertible airflow, high- and low-pressure switches. Dual scroll compressors. Scroll compressors have internal line-break overload protection. Factory-installed options include three heat options (high, medium, and low), medium- and high-static indoor fan option. Other market-driven options such as liquid propane/high altitude kits are available.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger; 10-year limited aluminized stainless steel heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoICPCommercial.com.
eProduct 188
Laars Heating Systems
Model: NeoTherm boiler or volume water heater
Footprint (in inches): 26 to 54 (length) by 25 (width) by 38 (height)
Serviceability features: Easy access to most components including the controls, gas valves, blowers, burner, etc., via the front and top of the unit. All piping and venting come from the top of the boiler to help make installations neat and piping easily accessible.
Technical support: Available from 8 a.m. to 5 p.m. Eastern time at 800-900-9276 and at regional service managers located across the United States and Canada.
Technical support materials: Available at www.laars.com. Installation manuals under “Document Download” section as well as part number look up by serial number via “Parts ID” area.
Noise-reduction features: Very quiet operation.
IAQ equipment supported: Product vents to the outside, does not impact inside air quality. Does have ultra-low 10-ppm NOx emissions for low impact on outdoor air quality.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: A 95 percent-plus direct vent, sealed combustion boiler or volume water heater (285 to 850 MBtuh) with 5 to 1 modulation. Zero clearance to combustibles and convenient top connections make it a good choice for tight installations. Horizontal or vertical direct venting up to 100 feet in PVC or stainless steel materials.
Warranty information: Ten-year limited boiler, five-year limited water heater.
Special installation requirements: New advanced LCD with touchpad control interface. Features menus in English, uncomplicated codes, easy quick setup, advanced setup functionality, outdoor reset with customizable reset curves, DHW override, and warm weather shutdown. Controls can stage up to eight boilers.
Contact: Laars Heating Systems, 603-335-6300; www.laars.com.
eProduct 189
Model: NeoTherm LC boiler or volume water heater
Footprint (in inches): 53 to 57 (length) by 27 (width) by 49 (height)
Serviceability features: Easy access to most components including the controls, gas valves, blowers, burner, etc., via the front or side of the unit. All piping and venting come from the back of the boiler to help make installations neat and piping easily accessible.
Technical support: Available from 8 a.m. to 5 p.m. Eastern time at 800-900-9276.
Technical support materials: Available at www.laars.com. Installation manuals under “Document Download” section, as well as part number look-up by serial number under “Parts ID” area.
Noise-reduction features: Very quiet operation.
IAQ equipment supported: Product vents to the outside, does not impact inside air quality. Does have ultra-low 10-ppm NOx emissions for low impact on outdoor air quality.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: A 94 percent-plus direct vent boiler or volume water heater in 1,000- and 1,700-MBtuh sizes with a 10 to 1 turndown. Its dual burners can modulate independently of each other to maximize fuel utilization. The controls can slide out, making setup and service much easier.
Warranty information: Ten-year limited boilers, five-year limited water heaters.
Special installation requirements: New advanced color LCD touch screen interface. Features menus in English, uncomplicated codes, easy quick setup, advanced setup functionality, outdoor reset with customizable reset curves, DHW override, and warm weather shutdown. Controls can stage up to four boilers or up to eight using the M4-LHS system.
Contact: Laars Heating Systems, 603-335-6300; www.laars.com.
eProduct 190
Lennox Industries Inc.
Model: EL296V gas furnace
Footprint (in inches): 29 (length) by 25 (width) by 33 (height)
Serviceability features: Separate inner blower door provides easy access. Slide-out blower can be quickly and easily accessed. Front-facing screws for easy access to igniter and flame rod. Gas piping and electrical inlets provided in both cabinet sides. Safety interlock switch automatically shuts off power when blower compartment access door is removed.
Technical support: Available at www.lennoxcommercial.com or by calling 877-726-0024.
Technical support materials: Engineering handbook, installation and operation manual, service manual available online.
Noise-reduction features: Fully-insulated cabinet with foil-faced insulation on sides and back of heating compartment for quiet, efficient operation. SilentComfort™ technology delivers the ultimate in quiet, consistent heating.
IAQ equipment supported: Variable-speed technology delivers greater humidity control and consistent airflow. Low continuous fan speed provides a quiet, constant flow of air. Dehumidification system (Active or Humiditrol® option).
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy ratings of 96 percent AFUE. Variable-speed motor that uses two-thirds less electricity than a standard motor, said the manufacturer. Two-stage operation minimizes up-and-down temperature changes. Duralok Plus® heat exchanger. SureLight® igniter and control board. icomfort® enabled. Durable steel cabinet for upflow, horizontal, or downflow applications without any modifications.
Warranty information: Ten-year Duralok Plus aluminized steel heat exchanger in nonresidential applications. One-year all other covered components in nonresidential applications.
Special installation requirements: In the United States, flue sizing must conform to the methods outlined in the current National Fuel Gas Code (NFPA 54/ANSI –Z223.1) or applicable provisions of local building codes. In Canada, flue sizing must conform to the methods outlined in National Standard of Canada CAN/CSA-B149.1.
Contact: Lennox Industries Inc.; www.lennoxcommercial.com.
eProduct 191
LG Electronics U.S.A.
Model: Multi V III HR split unit
Footprint (in inches): 30 (length) by 36 (width) by 66 (height)
Serviceability features: Front panels are removable for control box access and service tool connection, system settings switches, operating/error codes and auto addressing.
Technical support: Available at 888-865-3026 Monday to Friday, from 8 a.m. to 5 p.m. Central time.
Technical support materials: Service manual, installation manual, owner’s manual, submittal data, wiring diagrams, parts lists, equipment selection software, product catalogs, and toll-free technical support line for contractors.
Noise-reduction features: Sound attenuation is a standard product feature. Low dBA: 24 to 52 (indoor), 58 (outdoor-single frame). Sound pressure levels as tested in an anechoic chamber.
IAQ equipment supported: With the use of inverters and dual compressor outdoor units, this unit offers superior load matching, preventing constant cycling or large temperature swings. Tight temperature control through precise load matching will ensure maximum comfort, efficient operation, and superior dehumidification. Dehumidification system automatically adjusts fan and compressor speeds to ensure proper humidity control. A neo plasma air purifying filtration system is standard on all indoor evaporators. Indoor units are factory-supplied with a washable antibacterial pre-filter and a plasma filter.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy-efficiency and low-decibel sound levels are differentiators. Individual zone control is another advantage. These models provide heating or cooling and individual control in different zones. The heat recovery has fewer piping connections as a labor savings.
Warranty information: Two-year parts, four-year compressor.
Special installation requirements: Installation manuals are available online or by calling toll-free. Technical training classes for all LG Multi V products on installation and service are available at the LG training academy. LG offers complete training for engineers, architects, installers, and servicers to ensure every Multi V installation is successful.
Contact: LG Electronics Commercial Air Conditioning U.S.A., 888-865-3026; www.LG-VRF.com.
eProduct 192
Model: Multi V Water II HR split unit
Footprint (in inches): 22 (length) by 31 (width) by 44 (height)
Serviceability features: Front panels are removable for control box access and service tool connection, system settings switches, operating/error codes and auto addressing.
Technical support: Available at 888-865-3026, Monday to Friday from 8 a.m. to 5 p.m. Central time.
Technical support materials: Service manual, installation manual, owner’s manual, submittal data, wiring diagrams, parts lists, equipment selection software, product catalogs, and toll-free technical support line for contractors.
Noise-reduction features: Sound attenuation is a standard product feature. Low dBA: 24 to 52 (indoor), 49 (water source single frame). Sound pressure levels as tested in an anechoic chamber.
IAQ equipment supported: With the use of inverters and dual compressor water source units, the unit offers superior load matching, preventing constant cycling or large temperature swings. Tight temperature control through precise load matching will ensure maximum comfort, efficient operation, and superior dehumidification. Dehumidification system automatically adjusts fan and compressor speeds to ensure proper humidity control. A neo plasma air purifying filtration system is standard on all indoor evaporators. Indoor units are factory supplied with a washable antibacterial pre-filter and a plasma filter.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Energy-efficiency and low decibel sound levels are differentiators. Individual zone control is another advantage. These models provide heating or cooling and individual control in different zones. The heat recovery has fewer piping connections as a labor savings.
Warranty information: Two-year parts, four-year compressor.
Special installation requirements: Installation manuals are available online or by calling toll-free. In addition, technical training classes for all LG Multi V products on installation and service are available at the LG training academy. LG offers complete training for engineers, architects, installers, and servicers to ensure every Multi V installation is successful.
Contact: LG Electronics Commercial Air Conditioning U.S.A., 888-865-3026; www.LG-VRF.com.
eProduct 193
Lochinvar
Model: Copper-Fin II boiler
Footprint (in inches): 22 to 33 (length) by 37 to 92 (width) by 31 to 36 (height)
Serviceability features: Known for their small footprint and unique factory-welded stack frame option that allows for installation of two units in the area normally required for one, the enhanced models offer a more service-friendly design. The gas inlet and internal controls have been repositioned to the front of the appliance for easier access during installation and service. The built-in air filter reduces maintenance and improves performance with a field-convertible option to install the air intake on the rear or the right side of the boiler.
Technical support: Available at 800-722-2101, from 8 a.m. to 5 p.m. Central time.
Technical support materials: Wiring diagrams, piping diagrams, literature, I&O manual, service manual, user manual, pump recommendations, replacement parts list, product summary, warranty information, plan view drawings, typical spec, technical service, etc., are available at www.Lochinvar.com
Noise-reduction features: No special sound reduction measures are required.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: The Smart System™ control is a dedicated circuit board that among many other functions, acts as the thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The first line of horizontal chassis, copper-finned tube water heaters and boilers to operate with fan-assisted combustion. Available in models up to 2.07 million Btuh, the line is known for its high thermal efficiency, unique gasketless heat exchanger, proportional firing, small footprint, and multiple venting options. This line has been further enhanced with design updates for greater serviceability and the advanced Smart System operating control, taking Copper-Fin II to a new level of innovation, the company said.
Warranty information: Ten-year limited, which covers the heat exchanger for leakage, thermal shock, or other malfunction caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains installed at its original place of installation.
Special installation requirements: All models are now equipped with the exclusive Smart System control, which is designed to simplify installation, system sequencing, set-up, and troubleshooting. The user-friendly interface features a two-line, 16-character LCD display that provides readouts of setup, system status, and diagnostic data in words rather than codes.
Contact: Lochinvar LLC, 615-889-8900; www.Lochinvar.com.
eProduct 194
Model: CREST condensing boiler (FBN5000)
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Smart Touch™ operating control enhanced with an 8-inch touchscreen display; this advanced control offers ease of setup and use by installing contractors and includes Modbus protocol for easy integration into BMS. Featuring a sleek, smart design, this unit offers distinctive features and control parameters to provide facility managers with functionality, ease of operation and data retrieval.
Technical support: Available at 800-722-2101 from 8 a.m. to 5 p.m. Central time.
Technical support materials: Wiring diagrams, piping diagrams, literature, I&O manual, service manual, user manual, pump recommendations, replacement parts list, product summary, warranty information, plan view drawings, typical specification, technical service, etc., are available at www.Lochinvar.com.
Noise-reduction features: No special sound reduction measures are required. The boiler is library quiet.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: The Smart Touch control is a dedicated circuit board that, among many other functions, acts as the thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 2012 introduction of the FBN5000 brings leading-edge technology and exceptional energy efficiency to the largest commercial applications, said the company. It offers engineers more system design flexibility, sizes, and distinctive performance characteristics to meet today’s building standards for new construction and energy retrofit applications. Features include Smart Touch operating control platform, as well as an advanced burner and combustion system designed to provide exceptional turndown capabilities and improve overall seasonal efficiencies.
Warranty information: Ten-year limited, which covers the heat exchanger for leakage, thermal shock, or other malfunction caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains installed at its original place of installation.
Special installation requirements: Equipped with an enhanced Smart Touch control featuring an 8-inch touchscreen display, which offers ease of installation and data retrieval. Includes Modbus protocol for easy integration into BMS. Venting flexibility allows both vertical and horizontal venting options with increased vent lengths and configurations.
Contact: Lochinvar LLC, 615-889-8900; www.Lochinvar.com.
eProduct 195
Mitsubishi Electric Cooling & Heating
Model: PURY-P144TKMU-A (-BS) split system with heat recovery
Footprint (in inches): 29 (length) by 69 (width) by 65 (height)
Serviceability features: Built-in self-diagnostics direct a technician to a specific issue. Convenient front, side, and top panels allow for easy access to serviceable components. Maintenance tool for system monitoring and data collection for maintenance targeting.
Technical support: Available at 877-391-5550 from 8 a.m. to 7 p.m. Eastern time.
Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, submittals and specification sheets are available at www.MitsubishiPro.com. Maintenance tool software.
Noise-reduction features: Additional equipment is not necessary. The system is designed with sound in mind. Rated at 61 dBa. Variable-speed fan, compressor positioning in outdoor unit cabinet, insulated compressor isolation compartment, compressor vibration dampening system.
IAQ equipment supported: Varies the speed of the compressor to match the load requirements in the space. By slowing the compressor, and varying the speed of the indoor unit, the system provides a level of dehumidification to the space.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The world’s only two-pipe system that simultaneously cools and heats different zones within a building to provide energy-saving heat recovery operation. Industry-leading efficiencies, simultaneous cooling and heating to 14˚F, a smaller footprint, and improved heating start-up make these outdoor units ideal for a variety of applications.
Warranty information: Seven-year compressor and one-year parts.
Special installation requirements: Please consult installation manual.
Contact: Mitsubishi Electric Cooling & Heating, 678-376-2900; www.mitsubishipro.com.
eProduct 196
Modine
Model: Effinity93® unit heater with blowers (BTC model)
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Has the ability to be vented as either two-pipe or con-
centric vent system with 3- and 4-inch PVC vent pipe for quick, flexible, and cost-effective installations. Built on the PTS model footprint, delivers 93 percent efficiency in the same compact box size as an 80 percent efficient model. Factory-installed condensate drain overflow switch to provide peace of mind in knowing the unit will shut off if the drain is ever clogged.
Technical support: Manufacturer did not specify.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: This high-efficiency gas-fired unit heater offers blowers as an available option (Model BTC). Also features Conservicore technology — a high-grade stainless steel secondary heat exchanger built to withstand acidic condensate rather than aluminum secondary heat exchangers, a material that doesn’t compare to the robust capabilities that Conservicore delivers, claims the company.
Warranty information: Manufacturer did not specify.
Special installation requirements: The Contractor Convenience Package is standard, allowing for easier connectivity and troubleshooting. This package includes a service outlet for a condensate pump, utility light, or for cleaning. Operational status lights indicate power-to-the unit, a call-for-heat, and burner operation. The package also includes a convenient junction box for power connections and external terminals for fast thermostat connections.
Contact: Modine Mfg. Co., 800-828-4328 (800-828-HEAT); www.modinehvac.com.
eProduct 197
Model: PTP unit heater
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Allows quick and easy installations with wiring terminals and knockouts for quick access to gas and electricity, and a roomy controls cabinet for ease of work. The standard power exhaust simplifies side-wall or roof venting with small-diameter vent pipe and a permanently lubricated motor for trouble-free dependability.
Technical support: Manufacturer did not specify.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: This horizontal discharge unit heater delivers 80 percent thermal efficiency. It includes a stainless steel tubular heat exchanger as standard on all units. Other standard design features include totally enclosed fan motors and all the controls mounted inside the cabinet for protection from airborne moisture and dust.
Warranty information: Ten-year heat exchanger. All units are proudly made in the United States.
Special installation requirements: Optional features include finger-proof fan guards for meeting OSHA requirements when mounted below 7 feet, two-stage controls to reduce short-cycling and temperature fluctuations at part-load conditions, and field-installed adaptor kits for easy two-point suspension.
Contact: Modine Mfg. Co., 800-828-4328 (800-828-HEAT); www.modinehvac.com.
eProduct 198
Panasonic Air Conditioning Group
Model: U-72MF1U9 ECOi VRF system heat recovery unit
Footprint (in inches): 35 (length) by 35 (width) by 82 (height)
Serviceability features: Systems have a self-diagnostic auto check function to provide alert of alarm conditions. A web-based controller is available that controls up to 256 indoor units and can notify alarm conditions via email.
Technical support: Available at 800-851-1235.
Technical support materials: Technical data manuals, service manuals, installation manuals, submittal data, guide specifications, etc.
Noise-reduction features: Inverter-driven compressor, variable-speed dc fan motor.
IAQ equipment supported: Energy recovery ventilator, high-efficiency air filters.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: One outdoor unit connects as many as 16 indoor units. Up to 40 indoor units can be connected on larger systems with multiple outdoor units.
Warranty information: One-year parts, six-year compressor.
Special installation requirements: Installation classes are offered free of charge online or at company training facility.
Contact: Panasonic Air Conditioning Group, 678-810-1198; http://shop.panasonic.com/hvac/.
eProduct 199
RBI Water Heaters
Model: Futera Fusion XLF boiler
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Manufacturer did not specify.
Technical support: Available at 413-568-9571.
Technical support materials: Installation and operation manuals, literature, and support information available for download at www.rbiwaterheaters.com.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: Offers capacities of up to 4,000 MBtuh with ultra-high efficiencies of up to 99 percent in one compact footprint. Single units offer full modulation with 4:1 turndown and multiple unit installations offer flexible modulation of 8, 12, 16 and 20:1. Units are available as knock-down ready. Units are controlled by HeatNet and onboard intelligence control platform designed to maximize operating efficiency in a variety of configurations from stand alone to a network of up to 16 units.
Warranty information: To the original owner at the original installation site: heat exchanger of the industrial, commercial, and other nonresidential use boiler will be free from defects in material or workmanship for 10 years from the date of installation. Additional 21-year thermal shock warranty on heat exchanger. All other boiler/water heater parts are warranted against defects in material and workmanship for one year from date of installation or 18 months from date of shipment from RBI.
Special installation requirements: Manufacturer did not specify.
Contact: RBI Water Heaters, 413-568-9571; www.rbiwaterheaters.com.
eProduct 200
Reznor
Model: RDCC package rooftop
Footprint (in inches): 74 (length) by 46 (width) by 44 (height)
Serviceability features: Part of the Modular Air Processing System (MAPS®) line of equipment. These units are easily serviced. Large access doors and a conveniently located control panel puts everything in easy reach. Intelligent control systems can be quickly programmed to achieve desired air volume and temperature delivery. Step-by-step instruction manuals are shipped with each unit. Factory service support is also available.
Technical support: Available at 800-695-1901, ext. 1.
Technical support materials: All manuals and diagrams are shipped with the equipment. Wiring diagrams are placed in plastic sleeves and mounted inside the control panel door. Installation manuals, parts manuals, and troubleshooting information is available at www.RezSpec.com. Wiring diagrams and parts breakdowns for individual units are available to registered users of the website.
Noise-reduction features: MAPS units are roof- or outdoor slab-mounted, keeping the indoor environment comfortable and quiet.
IAQ equipment supported: Provides conditioned, filtered outdoor air for make-up air applications. These systems can also be selected with optional energy recovery wheels for ventilation use. Optional 2- or 4-inch filters are available up to MERV 13.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: MAPS systems can exceed 12.5 EER values for makeup air applications. The EER values are calculated based on 95/76˚F entering air conditions. This classifies the units as a high-efficiency make-up air and ventilation air units.
Warranty information: Standard equipment factory warranty applies to all units. Optional, extended warranties may be selected. Additional four-year system compressors. Also, additional four- or nine-year heat exchangers.
Special installation requirements: All necessary information is contained in the installation manuals shipped with the equipment. Qualified contractors will be able to install and start up these systems.
Contact: Reznor/Thomas&Betts, 800-695-1901; www.RezSpec.com.
eProduct 201
Rheem
Model: Commercial Prestige Series™ rooftop units (RKRL-C, RKRL-H, RLRL-C and RLRL-H)
Footprint (in inches): 94 or 152 (length) by 59 or 86 (width) by 44 to 57 (height)
Serviceability features: The line features ClearControl™ system, which allows real-time monitoring and communication between units. The system includes a rooftop unit controller that provides system diagnostics. Units are equipped with easy-access panels and external gauge ports, which enable the compressor service panel to stay in place while the unit is running.
Technical support: Available at 479-648-6237, Monday to Friday, from 8 a.m. to 5 p.m., Central time. Also available at www.Rheem.com are FAQs, literature, spec sheets, etc.
Technical support materials: Specification sheets, submittal sheets, warranty information, wiring diagrams, mechanical specifications, and brochures. Contractors can access these documents via www.Rheem.com and Apple iPad app, and they can also be viewed on a smartphone, an Apple iPad, or other tablet.
Noise-reduction features: Compressor isolation grommets and insulated panels.
IAQ equipment supported: Internally sloped, slide-out cleanable condensate drain pan, which conforms to ASHRAE 62 standards. The condensate drain pan collects excess moisture formed during the a/c cycle and must be maintained regularly to prevent the spread of bacteria.
Thermostat compatibility: Compatible with most thermostats. ClearControl system can easily be expanded to third-party building management systems.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The Prestige Series commercial line provides customers with equipment that exceeds minimum requirements. This line exceeds ASHRAE 90.1-2010 minimum efficiency standards by up to 15 percent, and exceeds Energy Star standards by 10 percent. Plus, it features microchannel coil technology, which uses up to 50 percent less refrigerant than conventional coils. Variable-frequency drive technology used for supply fans on all -H models.
Warranty information: Five-year compressor; 10-year heat exchanger (aluminum) or 20-year stainless steel heat exchanger; and one-year parts.
Special installation requirements: This unit follows standard installation practices.
Contact: Rheem; www.rheem.com.
eProduct 202
Samsung
Model: DVM 3 VRF system
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Each indoor unit is capable of being controlled to a different temperature setting and a different fan speed to suit either the building load or the desires of the individual user to maintain optimal comfort. When rooms, offices, or floors are unoccupied, the indoor units can simply be turned off, which saves energy and lengthens the life of the system.
Technical support: Available Monday to Friday, from 7:30 a.m. to 7 p.m. Eastern time at 800-699-6067.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Wide range of controlling options to choose from, ranging from the simple wired-remote controller on a wall controlling an individual indoor unit to a full building management system controlling multiple locations with power monitoring and Internet access control of the equipment.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: This system that has all the features of the DVM Plus III as well as the ability to heat and cool simultaneously. This is accomplished by having three refrigerant pipes being run from the outdoor unit(s) to the mode change unit (MCU) and then to the indoor units. This allows the indoor units to operate in either cooling or heating, based on the individual user’s preference or changing building loads. System is perfect for hotels, offices, and other applications where occupancy or load requires complete flexibility.
Warranty information: Manufacturer did not specify.
Special installation requirements: Required two-day training course for certification on installing DVM product. Visit www.samsungsystemac.com to see the training schedule.
Contact: Samsung, 717-243-2535; www.samsungsystemac.com.
eProduct 203
Sterling HVAC Products
Model: SF/SC tubular separated combustion unit heaters
Footprint (in inches): Manufacturer did not specify.
Serviceability features: Designed with the service person in mind, every component of the series is easily accessible. Ignition and fan controls are located in one centrally located control panel. The access door provides control isolation as well as a pleasing exterior appearance.
Technical support: Available at 413-564-5540.
Technical support materials: All literature and support material available for download at www.sterlinghvac.com
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: The separated combustion configuration allows application flexibility in areas where dust, dirt, humidity, or mildly corrosive conditions are prevalent. A unique power-venting system draws clean combustion inlet air from the outside while exhausting flue gases through the outlet discharge. All critical components including the burner, pilot ignition system, and flue are safely enclosed within the unit, protected from potentially corrosive elements.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: The unit heater offers a highly efficient, extremely durable alternative to traditional clam shell designs in a separated combustion configuration. The tubular heat exchanger has been designed to provide maximum and uniform heat transfer. The low pressure drop associated with this design enables heated air to be evenly distributed. The serpentine design experiences less thermally induced stress making it highly durable for significantly longer service life.
Warranty information: Ten-year heat exchanger, flue collector, and burner.
Special installation requirements: ETL certified in accordance with categories I and III venting requirements. This certification allows units to be vented both vertically and horizontally using either single-wall or double-wall venting materials. This venting flexibility make installation easier and more cost effective by allowing the installer to utilize existing venting components.
Contact: Sterling HVAC Products, 413-564-5540; www.sterlinghvac.com.
eProduct 204
Tempstar
Model: CHS180-240 split system heat pump
Footprint (in inches): 86 (length) by 45 to 67 (width) by 50 (height)
Serviceability features: Comfort Alert® troubleshooting LED fault indicators diagnose system-related malfunctions. Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoTempstar.com includes product specification sheets, installation and operation manuals.
Noise-reduction features: Units are equipped with scroll compressors and include vibration isolation for further enhancement of quiet operation. These units are equipped with suction line accumulators that smooth out refrigerant management during mild ambient conditions and the transitions during defrost operation to substantially reduce sounds associated with the scroll compressors pumping liquid refrigerant.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide demand-controlled ventilation capability.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: All models utilize round copper tube, aluminum plate fin condenser coils (RTPF). Compressors include overload protection. All units have high-pressure and loss-of-charge protection. Models with optional low ambient control provide cooling operation down to -20˚F.
Warranty information: Five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoTempstar.com.
eProduct 205
Model: RGS210-303 package gas/electric unit
Footprint (in inches): 128 to 142 (length) by 87 (width) by 49 to 57 (height)
Serviceability features: Units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points are located in one convenient place: the master terminal board. Access panels have easy-grip handles and no-strip screw feature. Exclusive IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support: Factory-trained technical service advisors on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.
Technical support materials: Product information posted online at dealer website www.GoTempstar.com includes product specification sheets and installation and operation manuals.
Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported: Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Duct-mounted CO2 sensor accessory available for field installation to provide outdoor air for ventilation capability on demand.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Dedicated vertical or horizontal airflow duct configuration models. This ASHRAE 90.1-compliant unit features high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium and low), stainless steel heat exchangers, and high static indoor fan option. Other options include liquid propane/high altitude kits.
Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements: None.
Contact: International Comfort Products LLC (ICP), 800-315-4370; www.GoTempstar.com.
eProduct 206
Viessmann Mfg. Co. (U.S.) Inc.
Model: Vitocrossal 200, CM2 condensing boiler
Footprint (in inches): 73 (length) by 36 (width) by 66 (height)
Serviceability features: All connections accessible from top for easy installation and service; gas fuel flexibility (NG/LPG/LNG) and high-altitude operation up to 10,000 feet with simple electronic conversion.
Technical support: Summer schedule: 8:30 a.m. to 5 p.m. Eastern time. Heating season schedule (Sept. 1 -April 30): Monday to Friday from 8 a.m. to 8 p.m. Saturdays, Sundays, and holidays, messages are checked at 11 a.m. and 4 p.m.
Technical support materials: Technical data manuals, installation, operating, and service instructions, wiring diagrams, and warranty information are available at www.viessmann.us or www.viessmann.ca.
Noise-reduction features: Thermal insulation around pressure vessel and acoustic insulation inside front panel; boiler operates at less than 45 dB at full output.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: Pre-assembled burner with 5:1 turndown ratio; direct/chimney venting (PP(s)/stainless steel) up to 200 feet; low inlet gas pressure (NG) of only 4 inches of water column. Large water content extends burner run time and reduces cycling; extremely low water pressure drop through heat exchanger eliminates need for dedicated boiler pump and low-loss header.
Warranty information: Limited 10-year (commercial).
Special installation requirements: Low inlet gas pressure requirement (NG) of only 4 inches of water column; no dedicated boiler pump and low-loss header required; gas fuel flexibility (NG/LPG/LNG) with simple electronic conversion; suitable for high-altitude operation up to 10,000 feet; less than 800 pounds completely assembled. Fits through standard 30-inch door.
Contact: Viessmann Mfg. Co. (U.S.) Inc., 800-288-0667; www.viessmann.us.
eProduct 207
WaterFurnace
Model: Envision2 compact water-source/geothermal heat pump
Footprint (in inches): 31 (length) by 26 (width) by 52 (height)
Serviceability features: Refrigerant circuit is designed to allow primary serviceability from the front. Seven horizontal and six vertical cabinets are provided for application flexibility. The blower motor and blower can be completely serviced or replaced without removal of the unit. Service of the blower and blower motor is made easier via the removable orifice ring on the housing. Two Schrader service ports are provided in every unit.
Technical support: Available at 800-257-5667.
Technical support materials: Brochure, specification, installation, submittal guide, and more located at www.waterfurnace.com.
Noise-reduction features: Double-isolated compressor mounting utilizing eight durometer selected rubber grommets. This isolation greatly reduces the primary noise frequency range of 100 to 300 Hz. All motors are vibration isolated to reduce noise. An optional super quiet sound package is also available and features multidensity laminate-lined compressor blanket designed to completely surround the compressor and suppress low frequency noise.
IAQ equipment supported: Corrosion-free composite double-sloped drain pan to eliminate standing water and prevent bacterial growth. A washable surface on insulation in all air handler compartments to allow cleanability and inhibit bacteria growth. Optional nonfibrous closed cell insulation. Open filter rail comes standard for non-ducted return applications. Optional factory-mounted, four-sided, deluxe filter rack, field switchable from 1 to 2 inches, is available for ducted return applications. Standard supplied filter is a 1-inch pleated MERV. An optional 2-inch MERV 13 is also available.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Offers the industry-leading efficiencies of full-size units in a much smaller footprint, claims the company. The compact cabinet makes this heat pump system the perfect solution for commercial retrofit and boiler/tower applications, the manufacturer said. Available in a wide selection of capacities (009-072), the units feature hot gas reheat, internal two-way valves, electrical disconnects, and the Aurora generation of controls.
Warranty information: 18 month parts only.
Special installation requirements: None.
Contact: WaterFurnace, 260-478-5667; www.waterfurnace.com.
eProduct 208
Model: Versatec Base water-source/geothermal heat pump
Footprint (in inches): 23 (length) by 26 (width) by 40 (height)
Serviceability features: Refrigerant circuit is designed to allow primary serviceability from the front. Two Schrader service ports are provided in every unit. The suction side and discharge side ports are for field charging and servicing access. All valves are 7⁄16-inch SAE connections. All water and electrical connections are made from the front of the unit. Unit is designed for front access serviceability.
Technical support: Available at 800-257-5667.
Technical support materials: Brochure, specification, installation, submittal guide, and more located at www.waterfurnace.com.
Noise-reduction features: ARI 260-sound rated using third-party testing. An optional super quiet sound package is also available for a modest cost and features multidensity laminate-lined compressor blanket designed to completely surround the compressor and suppress low-frequency noise. A washable surface on insulation in all air handler compartments to allow cleanability and inhibit bacteria growth. Optional nonfibrous closed cell insulation is also available for more sensitive applications.
IAQ equipment supported: Corrosion-free composite double-sloped drain pan to eliminate standing water and prevent bacterial growth. Open filter rail comes standard for nonducted return applications. Optional factory-mounted, four-sided, deluxe filter rack that is field switchable. Standard supplied filter is a 1-inch pleated MERV 4. An optional 2-inch MERV 13 is also available.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Engineered to offer high-efficiency operation while maintaining a small cabinet footprint and an impressive list of value-added features. With its compact design and ability to perform optimally in both water loop and geothermal applications, it is an ideal solution for both retrofit and new construction applications, said the company.
Warranty information: Eighteen-month parts only.
Special installation requirements: None.
Contact: WaterFurnace, 260-478-5667; www.waterfurnace.com.
eProduct 209
Publication date: 10/8/2012
