It’s time again for the annual Cooling Showcase. The NEWS' annual issue has traditionally introduced the latest air conditioning units available for the upcoming summer season. The intent is to help contractors prepare for this busy period by doing the research that will help them to distinguish between brands.

Like last year, the 2015 Cooling Showcase is split into two parts — commercial and residential. This issue focuses on the commercial side of the air conditioning industry, while the April 13 issue highlighted new offerings in the residential cooling market. Included in the coverage is feature-specific information about each individual product as submitted by the manufacturers.

The product grid, which can be viewed and downloaded here, contains technical facts, such as unit tonnage, refrigerant type, efficiency rating, and cooling capacity. The photo feature below provides more in-depth information on the features of each individual unit and also includes technical support information from the manufacturer. The manufacturers provided all of the data included in the product grid, as well as in the photo feature. Therefore, any questions should be directed to them via the contact information provided in the photo feature section.

AAON

Model: LZ Series package outdoor mechanical room

Footprint (in inches): Manufacturer did not specify.

Serviceability features: The unit controls, compressors, evaporator, and pumping packages are contained in a lighted walk-in service vestibule available with vestibule heating and/or cooling. Hinged doors have zinc-cast, lockable handles and provide easy access to all components. Labeled components and color-coded wiring match the unit-specific color-coded wiring diagram inside the service vestibule.

Technical support: Support is available through local AAON representatives.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and a factory run test report are included.

Noise-reduction features: Two-inch, double-wall, rigid polyurethane foam-injected panel construction dampens radiated compressor and pump sound. Compressors and pumping packages are housed within the service vestibule. Noise-reducing features include variable frequency drive (VFD)-controlled variable-speed condenser fans and pumps. The system’s compressors reduce fan, pump, and compressor sound.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: VFD-controlled variable-speed scroll compressors save energy and provide precise capacity control. Highly efficient oil-free magnetic-bearing variable-speed centrifugal compressors are available. Evaporative-cooled condensers include patented desuperheater coils that reduce scale build-up and decrease water usage. Waterside economizers are available for free cooling in low ambient conditions. Condensing boilers are available for hot water supply with up to 98 percent thermal efficiency. The complete hydronic system is housed in a packaged outdoor mechanical room and eliminates the need for indoor mechanical room space.

Warranty information: Standard one-year parts and optional five-year non-prorated compressor warranties are available.

Special installation requirements: Enjoy the ease of installation with AAON factory-installed options.

Contact: AAON Inc., 918-583-2266; www.aaon.com.

eProduct 160

Model: M2 Series geothermal heat pump

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Hinged access doors with lockable handles allow for easy servicing on all unit sections. Color-coded wiring diagrams and slide-out coil and energy recovery wheel access reduce service time. Units can be shipped as individual modules for installation in tight indoor spaces.

Technical support: Support is available through local AAON representatives.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and a factory run test report are included.

Noise-reduction features: Double-wall rigid polyurethane foam-injected panel construction dampens radiated compressor and fan sound. Supply, exhaust, and return fans include either rubber-in-shear or spring vibration isolation. Fans are also available with either variable frequency drives (VFDs) or electronically commutated motors (ECMs) for variable airflow control and reduced fan sound. Compressors include rubber-in-shear vibration isolation and can be provided with sound suppression blankets.

IAQ equipment supported: The unit is available with high-efficiency filtration in both a pre-filter and final filter configuration. Energy recovery wheels are available with a mechanical purge. Stainless steel drain pans are double-sloped to ensure positive drainage and prevent microbial growth. Coils are available with factory supplied UV-C lighting.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The unit is available for constant air volume (CAV), variable air volume (VAV), single zone VAV, or makeup air applications. Energy recovery is available with sensible or total energy recovery wheels. Modulating hot-gas reheat dehumidification is available for humidity control applications. Dual-fuel heating is available with hot water, steam, electric, and modulating gas heat.

Warranty information: Standard one-year parts and five-year non-prorated compressor warranties are available.

Special installation requirements: Enjoy the ease of installation with AAON factory-installed options.

Contact: AAON Inc., 918-583-2266; www.aaon.com.

eProduct 161

Airstage

Model: 460V VRF system

Footprint (in inches): 30 (length) by 37 (width) by 67 (height)

Serviceability features: Inspection/replacement of main parts is easy due to innovative construction and an LED display. Consolidated electrical components make maintenance easy. A movable PCB panel allows for easier maintenance. An easy-to-read seven-segment LED display explains operational/trouble status. A split front panel allows for maintenance from the top or bottom of the unit.

Technical support: Support is available 8 a.m. to 8 p.m. Eastern time at 888-888-3424. Through a password-protected website, contractors can download a design and technical manual, installation manual, service manual, operation manual, and submittal drawings.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: In low-noise mode, the operation of the 460-V outdoor condensing unit is limited to keep noise levels below a programmed limit. Using this feature, the maximum sound from a condensing unit can be as low as 50 dB.

IAQ equipment supported: Indoor wall-mounted units feature ion-deodorization filters, which decompose absorbed odors using the oxidizing/reducing effects of ions generated by the ultra fine-particle ceramic and apple-catechin filter, which absorbs fine dust, invisible mold spores, and harmful microorganisms onto the filter by static electricity, and further growth is inhibited and deactivated.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The product line provides many software features and control options that are not available elsewhere. It is designed to meet any customer’s variable refrigerant flow (VRF) needs.

Warranty information: Five-year parts and seven-year compressor warranties are available for systems that are installed and commissioned by a qualified contractor — see the warranty statement for full details.

Special installation requirements: Installing contractors are required to take a hands-on service course.

Contact: Fujitsu General America Inc., 973-287-1646; www.fujitsugeneral.com.

eProduct 162

Arcoaire

Model: RAX package air conditioner

Footprint (in inches): 74 (length) by 47 (width) by 34-41 (height)

Serviceability features: The unit includes access panels with easy-grip handles and easy-start, no-strip screw features. Includes a direct-drive electronically commutated motor (ECM) with a standard indoor motor and optional belt-drive systems. An advanced terminal board and simplified control box arrangement is provided for safety circuit troubleshooting. Through-the-bottom power entry capability comes standard and single-point electric connections offer easy installation.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goarcoaire.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise.

IAQ equipment supported: Two-inch return air filters are included and an optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified unit achieves up to 14.1-SEER/12-EER single-stage electric cooling. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, medium- and high-static fan motor options, and a factory-installed economizer option. Field-installed accessory roof curbs fit flush with the bottom of the unit.

Warranty information: Five-year limited electric heater parts; five-year limited compressor; and one-year limited parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goarcoaire.com.

eProduct 163

Model: RHH 036-072 package rooftop heat pump

Footprint (in inches): 74-116 (length) by 46-63 (width) by 33-57 (height)

Serviceability features: Access panels with easy-grip handles provide quick and easy access to the blower and blower motor, control box, and compressors. A no-strip screw feature has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal. A newly designed terminal board facilitates simple safety circuit troubleshooting and a simplified control box arrangement.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goarcoaire.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise.

IAQ equipment supported: Two-inch return air filters are supported. Optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation capability (DCV).

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Energy Star-qualified units are field convertible for vertical or horizontal airflow duct configurations. Other features include high- and low-pressure switches and a scroll compressor with internal line-break overload protection. Factory-installed high-static indoor fans and economizers are available.

Warranty information: Five-year limited compressor and one-year limited parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goarcoaire.com.

eProduct 164

Bard

Model: I-TEC air conditioner

Footprint (in inches): 31 (length) by 47 (width) by 94 (height)

Serviceability features: The air conditioner is designed for over-the-window-sill wall penetration. Front and center control panels provide easy access to components. Hinged, lockable, removable doors are included, and modularized construction makes transporting through standard doors or in elevators a cinch. The unit can be installed in left or right corners with no modifications. Additional service features include indoor and outdoor electronically commutated motors (ECMs), high- and low-pressure switches, and noncorrosive drain pans.

Technical support: Support is available through Bard’s local distribution network.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Two-stage scroll compressor with discharge muffler, double floating isolation mounting system, and sound-muffling cover help reduce noise. Eco-friendly, high-performance insulation is made from recycled denim. Acoustical sound accessories can be added for even lower operating sound levels as requirements and budgets dictate.

IAQ equipment supported: Energy recovery ventilator (ERV) and commercial room ventilator options are available.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The system is designed for classroom and similar applications demanding highly efficient, whisper-quiet performance. Vented above the sill at the window level, the unit is designed to be aesthetically pleasing, both indoors and out.

Warranty information: Five-year parts and compressor warranties are available.

Special installation requirements: None.

Contact: Bard Mfg. Co. Inc., 419-636-1194; www.bardhvac.com.

eProduct 165

Bosch FHP

Model: LV007-LV070 geothermal heat pump

Footprint (in inches): 26 (length) by 22 (width) by 43 (height)

Serviceability features: All units are designed to be serviced from the front of the unit. Schrader valves for high- and low-pressure gauges and the electrical box components are easily accessible for diagnosing and servicing the unit. Separate electrical knockouts allow for easy and safe routing of high- and low-voltage lines.

Technical support: Support is available online 24/7 at http://bit.ly/BoschGreensource. Online data include technical specifications; an installation, operation, and maintenance manual; and an online technical support form. Phone support is available 8 a.m.
to 7 p.m. Eastern time at 866-642-3198.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Units have a unique floating base pan, and the compressor is mounted on a heavy steel plate that rests on a high-density rubber pad on the base of the unit. Compressors are mounted on rubber grommets. This double isolation comes standard, preventing vibration and noise transmission from the compressor to the unit structure, resulting in exceptionally quiet operation. Optional ½-inch thick, closed-cell foam insulation helps aid IAQ and further attenuate low-frequency noise from the compressor compartment. An optional compressor blanket is available on unit sizes 024 and larger.

IAQ equipment supported: Bosch’s Total Comfort Control system provides clean, fresh, pure air. Options include photocatalytic oxidizers, humidifiers, smoke detectors, fresh-air dampers, and carbon and potassium-permanganate filters.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Equipped with a compact cabinet designed to fit most commercial replacement projects. This option-rich, single-stage product offering meets or exceeds ASHRAE 90.1 efficiency standards. FHP’s ISO 9001-2008- and ISO 14001-2004-certified facilities provide consistent quality in every unit.

Warranty information: One-year limited parts and five-year limited compressor warranties come standard. Extended warranties are available — see www.fhp-mfg.com for full warranty details.

Special installation requirements: Installations use a standard capillary tube, while a thermostatic expansion valve (TXV) is optional.

Contact: Bosch Thermotechnology - FHP, 603-965-7445; www.fhp-mfg.com.

eProduct 166

Carrier

Model: 50PC water-source heat pump

Footprint (in inches): 26 (length) by 33 (width) by 58 (height)

Serviceability features: Easy service access to the control board and refrigeration system is provided via one easy-to-remove panel. Internal components are common amongst the full line of commercial and residential water-source heat pumps (WSHPs). The WSHP open controller integrates easily into the i-Vu building management system as well as many third-party building management systems.

Technical support: Support is provided through a nationwide network of local distributors, Carrier University, and webcasts. Carrier ROLE can be used 24/7 at 877-963-1995 for service-related issues.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Sound-attenuating insulation and double compressor isolation come standard, helping to reduce noise levels. Optional compressor blankets and closed-cell foam insulation increase sound attenuation. A The WSHP open controller provides standard three-speed independent fan control, which will run the fan at the lowest possible fan speed to improve radiated and discharge sound levels.

IAQ equipment supported: MERV-8 and -13 filters are available as factory-installed options.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: A wide array of factory-installed options from hot-gas reheat and hot-gas motors to electronically commutated motor (ECM) blower motors to waterside economizers are available. Available factory-installed WSHP open controller provides control of all factory-installed options. A three-speed, independent fan-speed control helps increase latent heat removal, optimize fan efficiency, and lower sound levels.

Warranty information: First year parts-only and five-year compressor parts-only warranties are available. Optional parts-and-labor warranties up to five years are also available.

Special installation requirements: None.

Contact: Carrier Corp., 317-847-6930; www.carrier.com/commercial.

eProduct 167

Model: AquaEdge 19XR two-stage water-cooled chiller

Footprint (in inches): 230-254 (length) by 125-159 (width) by 60-76 (height)

Serviceability features: The positive-pressure semi-hermetic motor design eliminates service associated with shaft seal replacements and purge units. The controls integrate easily into building automation systems to provide valuable information via remote monitoring. Hinged water box covers are available to facilitate tube service and isolation valves supplied at filter driers, and oil filters help facilitate quick and easy changeout.

Technical support: Support is provided through a nationwide network of local distributors, Carrier University, and webcasts.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; and specification sheets are available at www.hvacpartners.com.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: Advanced two-stage compressor technology, proven in earlier model 19EX and 19FA chillers, crafts the continuing evolution of large chillers. The improved two-stage design provides increased cycle efficiency by leveraging an interstage flash economizer. This reduces compressor power while simultaneously increasing refrigeration effect and capacity, resulting in highly efficient performance at highly loaded conditions.

Warranty information: One-year parts-and-labor warranty after startup or 18 months from shipment, whichever occurs first. Five-year refrigerant (North America only) warranty and extended warranties are available for up to 10 years.

Special installation requirements: None.

Contact: Carrier Corp., 317-847-6930; www.commercial.carrier.com.

eProduct 168

Century

Model: InverterFlex VFH**CA ductless mini-split ceiling cassette system

Footprint (in inches): Varies.

Serviceability features: Units are equipped with self-diagnostics to speed service, and error codes may be shown on the indoor unit panel or outdoor unit control board. On the outdoor unit, service ports are positioned to be readily accessible.

Technical support: Experienced technical advisors are available to answer questions about installation, operation, and service, 8 a.m. to 5 p.m. Eastern time at 517-787-2100. Sales representatives throughout the U.S. and Canada can also provide assistance. Sales rep contact information can be found on the website under the Where to Buy link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: The design keeps compressor sound outside the structure. Also, with inverter technology, the dc compressor runs mostly at low speed, which reduces any vibration and associated noise. The cassette fan, motor, and housing are all built to be so quiet residents may not be aware they are running. Sound-dampening material has been applied to the louvers on the cassette panel to further reduce noise levels.

IAQ equipment supported: The enhanced air filter provides superior filtration. It should be vacuumed and/or washed at least once every six months. The cassette’s cover panel is easily released by pushing on two tabs and swings open for convenience.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: Cool (or heat) one to five rooms with one outdoor unit. Ceiling cassettes can be mixed by size or with other indoor styles up to total condenser capacity. True zone control is provided with built-in temperature sensing; a wired wall thermostat and remote is provided for each cassette. A follow mode senses temperature at the remote and maintains the set point wherever the remote is located. Multiple modes, including auto operation and intelligent pre-heat, prevent the blowing of cold air. A four-way louver swing prevents stratification and drafts, and the unit operates in low-ambient conditions.

Warranty information: Express limited warranty covers compressor for six years and other parts for two years. Some limitations apply. Units should be registered within 90 days of purchase to assure full-term coverage.

Special installation requirements: Each cassette comes with a wireless remote and a wall-mounted wired thermostat (use is optional). A cardboard template is included with each unit to act as an installation guide to ensure ceiling tiles are cut to the proper size and threaded rods are placed in the right locations to suspend the unit.

Contact: MARS/Century, 517-787-2100; www.century-hvac.com.

eProduct 169

ClimaCool Corp.

Model: Configured package rooftop/MUA Systems: 2 Series/4 Series/8 Series rooftop and makeup air units

Footprint (in inches): 212 (length) by 100 (width) by 90 (height)

Serviceability features: Hinged access doors with generously sized control and access compartments provide easy service accessibility. The sloped roof eliminates standing water, and the unit includes a slide-out double-sloped, insulated, stainless steel, IAQ-compliant drain pan.

Technical support: Support is available at technicalsupport@climacoolcorp.com or 405-815-3000.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a troubleshooting guide; specification sheets; startup instructions; and startup and service training classes are available.

Noise-reduction features: A 2-inch double-wall cabinet construction; polyurethane foam-injected panels for all doors, roof, walls, and floor; and R-13 insulation help reduce noise levels. A thermal break provides a moisture barrier and improved IAQ. High-efficiency variable-speed electronically commutated condenser fans with integral head pressure control and a distinctive airfoil blade design helps reduce operating noise levels.

IAQ equipment supported: An energy conservation wheel features a hard core molecular sieve desiccant with a galvanized steel frame. The unit features a stainless steel drain pan with slide-out double-sloped design, is ASHRAE 62.1-compliant, and features filtration up to MERV 14.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The unit is designed to treat 100 percent outside air from inception by optimizing refrigerant management. Face-split, six-row DX coils ensure ideal dehumidification at all ambient conditions. The use of an optional hard core molecular sieve energy conservation wheel provides maximum energy efficiency, minimizing operating cost while improving IAQ. Air Movement and Control Association (AMCA) blowers provide verifiable airflow performance.

Warranty information: One-year parts, five-year compressor, and 10-year gas-fired heat exchanger warranties are available.

Special installation requirements: No special installation requirements.

Contact: ClimaCool Corp, 405-815-3000; www.climacoolcorp.com.

eProduct 170

Model: UCA Series modular chiller

Footprint (in inches): Manufacturer did not specify.

Serviceability features: The chiller’s design allows easy access to all major components. A unique design is fully serviceable and maintainable without removing the module from the chiller bank or disassembling headers.

Technical support: Support is available at technicalsupport@climacoolcorp.com or 405-815-3006.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; specification sheets; startup instructions; and startup and service training classes are available.

Noise-reduction features: High-efficiency variable-speed electronically commutated condenser fans with integral head pressure control, and a unique acoustical design help reduce noise levels.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: These chillers offer true redundancy with separate module electrical feeds and integral water-isolation valves, permitting maintenance of one module while the remaining system continues operation. The package air-cool product offers low operating noise from high-efficiency electronically commutated fans and a high-efficiency rating exceeding ASHRAE 90.1 minimum requirements.

Warranty information: One-year parts and optional four-year-extended compressor warranties are available.

Special installation requirements: No special installation requirements.

Contact: ClimaCool Corp, 405-815-3015; www.climacoolcorp.com.

eProduct 171

ClimateMaster

Model: Tranquility^® 30 Digital Series water-source heat pump

Footprint (in inches): 31 (length) by 25 (width) by 51 (height)

Serviceability features: iGate™ technology control system allows the installer to monitor the performance of the unit, custom tailor its operation, and diagnose any issues, all from the thermostat. vFlow™ variable water flow technology builds the major water circulation components into the unit for a clean installation, cutting down on time and installation costs. Other features include the swing-out/drop-out control box for accessibility and an internal P-trap to save on installation costs.

Technical support: Support is available at 405-745-6000.

Technical support materials: Wiring diagrams; installation, operation, and
maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Foil-faced insulation in the blower section, a fully insulated compressor section, and compressor-mounted floating plate help reduce noise levels.

IAQ equipment supported: The TE Series has multiple air filter options including 1- and 2-inch pleated MERV-8, MERV-11, and MERV-13 filters, in addition to the standard fiber throwaway filters. The unit’s air-handling compartment is lined with cleanable foil-faced insulation. Additionally, it contains a soft-start variable-speed electronically commutated motor (ECM) fan motor and a multi-stage scroll compressor for quiet operation and comfortable temperature control.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: This package water-source heat pump (WSHP) delivers efficient, comfortable, reliable, and serviceable performance. Other features include iGate two-way communicating controls, a two-stage compressor, a variable-speed fan, and vFlow internal variable water flow components.

Warranty information: A five-year standard warranty is available with the option to extend to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster Inc., 918-557-5828; www.climatemaster.com.

eProduct 172

Model: Tranquility^® Vertical Stack (TSL) Series water-source heat pump

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Re-
movable chassis allows for staged installation and ease of maintenance/
service once installation is complete.

Technical support: Support is available at 405-745-6000.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Dual-level compressor isolation lowers vibration and reduces noise for quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Designed with a 4-wire ATC thermostat connection and standard CXM controller, the TSL Series unit features loss-of-charge and high-pressure switches; a lockout safety-circuit reset function at the thermostat or disconnect; a five-minute anti-short cycle; random start; high-voltage, low-voltage, and condensate overflow protection; an LED fault indicator; 24-vac or dry-contact alarm options; and a low-temperature cutout on the water coil. It is also available with iGate (DXM2) controls, allowing for the unit’s configuration, diagnostics, and monitoring in plain English on an ATC thermostat or ACD diagnostic tool.

Warranty information: A five-year standard warranty is available with the option to extend to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster Inc., 405-745-6000; www.climatemaster.com.

eProduct 173

Coleman

Model: Apex rooftop gas/electric, electric/electric, and heat pump units

Footprint (in inches): 82 (length) by 45 (width) by 33 (height)

Serviceability features: The heat pump includes Simplicity SE; smart equipment controls come standard with LCD display; and supply, return, and outdoor temperature sensors. Wireless access to unit information is available via a smartphone, tablet, laptop, or PC. Other features include filter, electrical, and compressor access panels; external refrigerant ports; and adjustable belt drive pulleys.

Technical support: Support is available 8 a.m. to 5 p.m. Central time by calling 877-874-7378.

Technical support materials: Tech guides, installation manuals, parts lists, and accessory instructions are available at www.colemanac.com or www.upgnet.com.

Noise-reduction features: The scroll compressor and microchannel condenser coil help to reduce noise levels.

IAQ equipment supported: Two-inch standard or 2-inch MERV-7 pleated filters, CO2 demand control ventilation option, and an optional stainless steel drain pan are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Simplicity SE control comes standard with temperature sensors and an LCD display. Wireless capability is provided for startup, commissioning, and monitoring. New 14-SEER models are built in the same cabinet and footprint as prior generations of the product. The unit can be used to replace existing UPG products in the same footprint/curb size dating back to the mid-1980s.

Warranty information: Five-year compressor, one-year parts, 10-year aluminized heat exchanger, 15-year stainless steel heat exchanger, and three-year E-coat indoor and outdoor coil warranties are available.

Special installation requirements: Units utilize scroll compressors with intertwined copper/aluminum evaporator coils and microchannel condenser coils (does not apply to heat pumps).

Contact: Johnson Controls Inc., 405-419-6557; www.colemanac.com.

eProduct 174

Model: Peak™ rooftop unit, ZX and ZY

Footprint (in inches): 74-88 (length) by 49-62 (width) by 33-49 (height)

Serviceability features: The unit offers tool-less air filter access; easy conversion from 2- to 4-inch filters; offers microprocessor control with an LED display providing unit status; start-up and commissioning features; unit setup, supply, return and outdoor air temperatures; and plug-and-play accessories. The control box and gas heating section are easily accessible.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Product information is available at www.colemanhvacdealer.com or www.upgnet.com.

Noise-reduction features: Quiet single- and dual-scroll compressor offering with a fully insulated cabinet and embossed unit top help reduce noise levels.

IAQ equipment supported: Two- or 4-inch air filters up to MERV 13 are a factory option or can be installed in the field with the 2- to 4-inch-standard convertible filter rack. Factory- or field-installed smoke detectors are also supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The product features a simple-to-use microprocessor control providing advanced features well above and beyond electromechanical controls. Improved, embossed top panels provide a durable, rigid cabinet for longevity and noise reduction. Heavy base rails allow for transport without base damage.

Warranty information: Five-year part and compressor (3-5 tons), one-year parts, and five-year compressor (6-12.5 tons) warranties are available. A 10-year aluminized and 15-year stainless steel heat exchanger and additional extended warranties are available.

Special installation requirements: The new packaged product is available in 3- to 12.5-ton sizes and provides a platform that easily fits on many existing unit roof curbs without the need for an adapter curb.

Contact: Johnson Controls Inc., 405-419-6557; www.colemanac.com.

eProduct 175

Comfortmaker

Model: RAH 090-150 package air conditioner

Footprint (in inches): 88-116 (length) by 60-63 (width) by 49-57 (height)

Serviceability features: All connections and troubleshooting points are located in the easily accessible master terminal board. Units feature through-the-base utility connections capabilities. Access panels have easy-grip handles and a no-strip screw feature. A newly designed terminal board facilitates simple safety circuit troubleshooting and a simplified control box arrangement.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.gocomfortmaker.com.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. An accessory duct-mounted CO2 sensor is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Energy Star-qualified units feature field-convertible airflow (field accessory supply duct kit required for 150 size model only), high- and low-pressure switches, and scroll compressors. Scroll compressors have internal line-break overload protection. Factory-installed options include medium- and high-static indoor fan and economizer options.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gocomfortmaker.com.

eProduct 176

Model: RAX package air conditioner

Footprint (in inches): 74 (length) by 47 (width) by 34-41 (height)

Serviceability features: Access panels include easy-grip handles and easy-start, no-strip screw features. Direct-drive electronically commutated motor (ECM) with standard indoor motor and optional belt drive systems are supported. An advanced terminal board and simplified control-box arrangement provide safety circuit troubleshooting. Through-the-bottom power entry capability comes standard. Single-point electric connections provide for easy installation.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.gocomfortmaker.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise levels.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified unit achieves up to 14.1-SEER/12-EER single-stage electric cooling. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, medium- and high-static fan motor options, and a factory-installed economizer option. Field-installed accessory roof curbs fit flush with the bottom of the unit.

Warranty information: Five-year limited electric heater parts, five-year limited compressor, and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gocomfortmaker.com.

eProduct 177

Daikin Applied

Model: RoofPak™ package rooftop with modulating variable-speed inverter compressor

Footprint (in inches): Custom

Serviceability features: The unit features a low-maintenance, modulating, variable-speed inverter scroll compressor; slide-out ERW; MicroTech® III controller with Open Choices™ operates with BACnet or LonMark communications for easy integration with building automation systems (BAS); user-friendly control keypad and display; Intelligent Equipment™ option for remote access; 2- or 4-inch slide-out filter racks; hinged access doors on both sides of all sections for easy access; microchannel condensers; and cleanable double-wall foam-injected panels.

Technical support: Local service available in all major cities.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; FAQs; catalogs; and brochures are available.

Noise-reduction features: Ultra-quiet condenser fans, double-wall R-6.5 foam-injected panels, compressor sound blankets, and sound attenuators help reduce noise.

IAQ equipment supported: Energy recovery wheel, stainless-steel double-sloped drain pan, 100 percent dedicated outdoor air option, modulating hot-gas reheat dehumidification control, MERV-13 filters, and cleanable double-wall construction are supported.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Modular construction with walk-in access; energy recovery wheels for reduced energy costs; 100 percent dedicated outdoor air, dehumidification, volume air volume (VAV), or constant-volume operation; multiple factory-integrated options for customized flexibility such as return/exhaust fans, draw-through/blow-through final filters, blenders, face, and bypass dampers; and sound attenuators are supported. Heavy-duty construction and independent certification complies with International Building Code (IBC) seismic requirements.

Warranty information: Normal Daikin Applied warranties apply.

Special installation requirements: All components are factory installed except the space sensor and optional static pressure sensing tubes.

Contact: Daikin Applied, 763-553-5157; www.daikinapplied.com.

eProduct 178

Model: Trailblazer™ chiller

Footprint (in inches): 95-237 (length) by 88 (width) by 99-101 (height)

Serviceability features: Using all-aluminum microchannel heat exchanger technology, in conjunction with proven compressor equipment, the Trailblazer requires minimal maintenance, delivering on low operating costs while improving overall efficiency.

Technical support: Contact local Daikin Applied sales or service office or visit www.daikinapplied.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: A compressor sound-reduction package is suitable for sound-sensitive projects.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: These air-cooled scroll chillers feature outstanding performance, low installation costs, high operating efficiency, and ease of maintenance. These reliable 30- to 180-ton chillers provide big benefits for small to mid-sized buildings as well as mission-critical applications like data centers and hospitals. Factory-installed pump packages include a single-point power, a remote evaporator, Rapid Restore™, fast-loading microchannel condenser coils, tube-and-fin options, connection and electrical options, ambient options, and communication options. The unit is Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified.

Warranty information: The standard Daikin Applied chiller warranty applies. Contact a local Daikin Applied sales or service office or visit www.daikinapplied.com.

Special installation requirements: Manufacturer did not specify.

Contact: Daikin Applied, 763-553-5157; www.daikinapplied.com.

eProduct 179

Daikin Ductless

Model: VRV-IV ceiling-suspended cassette, FXUQ-PVJU

Footprint (in inches): 37 (length) by 37 (width) by 7 (height)

Serviceability features: Easily serviced from a drop down panel.

Technical support: Contact a local distributor or call 866-432-4546. Daikin’s eQuip is a free mobile app for cellphone and tablet access to technical information and downloads of technical documents, as well as dealer quotations and spare parts information. The website, www.drdaikin.com, provides quick access to product error codes. Daikin University, www.daikinuniversity.com, offers industry leading online and classroom training.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: An auto fan mode is available to reduce fan speed and sound levels as the room temperature gets closer to set point.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The cassette is an ideal solution for rooms without a false ceiling or attic space above the ceiling. The optional occupancy sensor kit, together with the air temperature sensor and advanced control functions, enable the unit to provide exceptional comfort, efficiently and flexibly.

Warranty information: Ten-year parts limited warranty is available.

Special installation requirements: Refrigerant balancing joints (REFNETS) are supplied with each VRV-IV system installation to increase the reliability and performance of the system.

Contact: Daikin North America LLC, 469-446-3791; www.daikincomfort.com.

eProduct 180

Model: VRV-IV floor-standing unit, FXLQ-MVJU9

Footprint (in inches): 44-55 (length) by 8 (width) by 23 (height)

Serviceability features: A removable front panel provides easy access for maintenance.

Technical support: Contact a local distributor or call 866-432-4546. Daikin’s eQuip is a free mobile app for cell phone and tablet access to technical information and downloads of technical documents as well as dealer quotations and spare parts information. The website, www.drdaikin.com, provides quick access to product error codes. Daikin University, www.daikinuniversity.com, offers online and classroom training.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Sound-absorbing fiberglass and urethane foam insulation help reduce noise levels.

IAQ equipment supported: The unit is resin net mold-resistant and a long-lasting filter is included.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The slim design requires minimal installation space. A wide air-discharge outlet efficiently distributes air throughout the space. Silent-stream fan technology provides whisper-quiet operation.

Warranty information: Ten-year parts limited warranty is available.

Special installation requirements: Refrigerant balancing joints (REFNETS) are supplied with each VRV-IV system installation to increase the reliability and performance of the system.

Contact: Daikin North America LLC, 469-446-3791; www.daikincomfort.com.

eProduct 181

Daikin Unitary

Model: DCC/DCG/DCH Series package cooling/gas-electric/heat pump rooftop

Footprint (in inches): Manufacturer did not specify.

Serviceability features: The unit’s footprint fits many existing curbs without a curb adaptor and includes convertible airflow for horizontal or downflow applications (3-12.5 ton). Other features include factory-installed (steel-caged) filter driers, high- and low-pressure switches, a contactor with lugs, a 24-V terminal strip, a sloped drain pan, and a built-in filter rack with standard 2-inch filters.

Technical support: Contact a local distributor 7 a.m. to 7 p.m. Central time, weekdays, or call 888-593-9988 option No. 5.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: The units now feature a SmartCoil™ condensing coil, an advanced and efficient 5-mm copper tube, and aluminum fin combination.

Warranty information: A five-year parts limited warranty is available.

Special installation requirements: Manufacturer did not specify.

Contact: Daikin North America LLC, 469-446-3791; www.daikincomfort.com.

eProduct 182

Day & Night

Model: PHR5 package heat pump

Footprint (in inches): 48 (length) by 33-44 (width) by 44-55 (height)

Serviceability features: The unit installs easily on a rooftop or at the ground level. Three-panel access provides for easy maintenance and installation. The heat pump easily converts to down-discharge applications.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.godayandnight.com.

Noise-reduction features: The outdoor fan is sized and optimized for minimal noise.

IAQ equipment supported: Accessory filter racks support 2-inch filters.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Energy Star-qualified unit achieves up to 15.5-SEER/12.5-EER electric cooling performance and up to 8.5-HSPF electric heating performance. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, and high-efficiency electronically commutated motor (ECM) indoor blower motor. Dehumidification mode (airflow reduction) is available on all models.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: Roof curbs available as field-installed accessories.

Contact: International Comfort Products, 800-315-4370; www.godayandnight.com.

eProduct 183

Model: RGH 181-303 package gas/electric unit

Footprint (in inches): 128-158 (length) by 86 (width) by 49-57 (height)

Serviceability features: IGC solid-state control for onboard diagnostics with an LED error-code designation, burner control logic, and energy-saving indoor fan motor delay come standard. All connections and troubleshooting points are located on the easily accessible master terminal board. Units feature through-the-base utility connection capabilities, and access panels feature easy-grip handles and a no-strip screw feature.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.godayandnight.com.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Energy Star-qualified units feature two-stage cooling with independent circuits and controls. The units are available in dedicated vertical or horizontal airflow duct-configuration models. Other features include high- and low-pressure switches and a scroll compressor with internal line-break overload protection. A high-static indoor fan, economizers, variable frequency drive (VFD) two-speed fan, and a hot gas re-heat system are available as factory-installed options.

Warranty information: A 15-year limited optional stainless steel heat exchanger; 10-year limited aluminized stainless steel heat exchanger; five-year limited compressor; and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.godayandnight.com.

eProduct 184

Fraser-Johnston

Model: Packaged rooftop

Footprint (in inches): 82 (length) by 45 (width) by 33 (height)

Serviceability features: Includes Simplicity SE; smart equipment controls come standard with LCD display; and supply, return, and outdoor temperature sensors. Wireless access to unit information is available via a smartphone, tablet, laptop, or PC. Other features include filter, electrical, refrigerant ports, and adjustable belt drive pulleys.

Technical support: Available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Tech guides, installation manuals, parts lists, and accessory instructions are available at www.fraserjohnston.com or www.upgnet.com.

Noise-reduction features: Scroll compressor and microchannel condenser coil help reduce noise levels.

IAQ equipment supported: Two-inch-standard or 2-inch MERV-7 pleated filters, CO2 demand control ventilation option, and stainless steel drain pan option are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Simplicity SE control with standard temperature sensors and LCD display come standard. Wireless capabilities provide start-up, commissioning, and monitoring. New 14-SEER models are in the same cabinet and footprint as prior generations of the product. The unit can be used to replace existing UPG products in the same footprint/curb size dating back to the mid-1980s.

Warranty information: Five-year compressor, one-year parts, 10-year aluminized heat exchanger, 15-year stainless steel heat exchanger, and three-year E-coat indoor and outdoor coil warranties are available.

Special installation requirements: Units utilize scroll compressors with intertwined copper/aluminum evaporator coils and microchannel condenser coils (does not apply to heat pumps).

Contact: Johnson Controls Inc., 405-419-6557; www.fraserjohnston.com.

eProduct 185

GeoComfort

Model: GVS/GVT Element Series compact vertical water-to-air package geothermal heat pump

Footprint (in inches): 22 (length) by 22 (width) by 37 (height)

Serviceability features: Most commonly accessed components can be reached via the front cabinet, including the desuperheater, reversing valve, blower motor, refrigerant ports, thermostatic expansion valve (TXV), and filter drier. A hinged control box easily tilts out of the way for access to internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

Technical support: Support is available 24/7 by calling 618-664-9010 or by emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric compressor and blower motor vibration-absorption pads provide superior sound and vibration insulation. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. Heavy-gauge galvanized or prepainted sheet metal cabinet is engineered and built to meet industry leakage guidelines.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating air coil failure caused by formicary corrosion. A foam-insulated, flat-wound, enhanced-surface, coaxial heat exchanger improves heat transfer, improving efficiency. A standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated motor (ECM) blower (two-stage) offer highly efficient performance. ECM motors are optional on single-stage units. Commercial voltages are also available.

Warranty information: A standard one-year parts-only coverage warranty is available. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are available.

Special installation requirements: Its small footprint, front-mounted plumbing, and side-entry electrical connections are ideal for retrofit or new-build applications. The purpose-build model uses many of the design innovations found throughout the product line and incorporates them into a compact, efficient, and technician-friendly package.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 186

Model: GYT Navigator Series vertical package water-to-air geothermal heat pump

Footprint (in inches): 30 (length) by 25 (width) by 54 (height)

Serviceability features: Improved digital controls can be mounted on the top or side of the unit in either a left- or right-hand return position. The control box has a status window that enhances the visibility of the unit’s status lights without opening the cover. All cabinet panels are removable for ease of service.

Technical support: Support is available 24/7 by calling 618-664-9010 or by emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a training guide; specification sheets; startup instructions; and installation instruction videos are available.

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provides superior compressor and blower motor isolation. Internal copper tubing employs an enhanced shock loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or prepainted sheet metal cabinet is engineered and built to meet industry leakage guidelines.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The multi-positional cabinet is field convertible for a left- or right-hand return. An all-aluminum microchannel air coil eliminates air coil failure caused by formicary corrosion. A foam-insulated, enhanced-surface coaxial heat exchanger protects against moisture and improves performance. A variable-speed electronically commutated motor (ECM) blower motor matches to the ductwork to deliver optimum airflow.

Warranty information: A standard one-year parts-only coverage warranty is available. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are also available.

Special installation requirements: Field-selectable multi-positional return air with factory-supplied duct flanges allow easy installation in new-build or retrofit projects. An externally mounted control box provides eye-level access to controls for ease of activation and maintenance. All units are test run at the factory and delivered ready to install and commission.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 187

Heil

Model: PHR5 package heat pump

Footprint (in inches): 48 (length) by 33-44 (width) by 44-55 (height)

Serviceability features: The unit installs easily on a rooftop or at the ground level. Maintenance and installation access is accessible through three panels and the unit is easily convertible to down-discharge applications.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goheil.com.

Noise-reduction features: The outdoor fan sized and optimized for minimal noise.

IAQ equipment supported: Accessory filter racks support 2-inch filters.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Energy Star-qualified unit achieves up to 15.5-SEER/12.5-EER electric cooling and up to 8.5-HSPF electric heating. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, and a high-efficiency electronically commutated motor (ECM) indoor blower motor. Dehumidification mode (airflow reduction) is included on all models.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: Roof curbs are available as field-installed accessories.

Contact: International Comfort Products, 800-315-4370; www.goheil.com.

eProduct 188

Model: RAH 090-150 package air conditioner

Footprint (in inches): 88-116 (length) by 60-63 (width) by 49-57 (height)

Serviceability features: All connections and troubleshooting points are located in one convenient place — the easily accessible master terminal board. The units feature through-the-base utility connection capabilities. Access panels have easy-grip handles and a no-strip screw feature. A newly designed terminal board facilitates simple safety circuit troubleshooting and a simplified control box arrangement.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goheil.com.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. An accessory duct-mounted CO2 sensor is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Energy Star-qualified unit features field-convertible airflow (a field-accessory supply-duct kit is required for the 150-size model only), high- and low-pressure switches, and scroll compressors. Scroll compressors have internal line-break overload protection. Factory-installed options include medium- and high-static indoor fan and economizer options.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goheil.com.

eProduct 189

Hydron Module

Model: HVS/HVT Origin Series compact vertical water-to-air package geothermal heat pump

Footprint (in inches): 22 (length) by 22 (width) by 37 (height)

Serviceability features: Most commonly accessed components can be reached via the front cabinet, including a desuperheater, reversing valve, blower motor, refrigerant ports, a thermostatic expansion valve (TXV), and a filter drier. A hinged control box easily tilts out of the way for access to internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

Technical support: Support is available 24/7 by calling 618-664-9010 or emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provide compressor and blower motor isolation. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or pre-painted sheet metal cabinet is engineered and built to meet industry leakage guidelines.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating air coil failure caused by formicary corrosion. A foam-insulated, flat-wound, enhanced-surface coaxial heat exchanger improves heat transfer, improving efficiency. A standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated motor (ECM) blower (two-stage) offer higher efficiency. ECM motors are optional on single-stage units. Commercial voltages are also available.

Warranty information: Standard one-year parts-only warranty coverage is available. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are also available.

Special installation requirements: Its small footprint, front-mounted plumbing, and side-entry electrical connections are ideal for retrofit or new-build applications. The purpose-build model uses many of the design innovations found throughout the product line and incorporates them into a compact, efficient, and technician-friendly package.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 190

Model: HYT Evolution Series vertical water-to-air package geothermal heat pump

Footprint (in inches): 30 (length) by 25 (width) by 54 (height)

Serviceability features: Improved digital controls can be mounted on the top or side of the unit in either a left- or right-hand return position. The control box has a status window that allows for clear visibility of the unit’s status lights without opening the cover. All cabinet panels are removable for ease of service.

Technical support: Available 24/7 by calling 618-664-9010 or emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and installation instruction videos are available.

Noise-reduction features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage scroll compressor from the unit. Internal copper tubing employs an enhanced shock loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: A multi-positional cabinet is field convertible to a left- or right-hand return. An all-aluminum microchannel air coil eliminates air coil failure caused by formicary corrosion. Foam-insulated, enhanced-surface coaxial heat exchanger protects against moisture and improves performance. A variable-speed electronically commutated motor (ECM) blower matches to ductwork, delivering optimum airflow. Commercial voltages are also available.

Warranty information: A standard one-year parts-only coverage warranty is available. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are available.

Special installation requirements: Field-selectable multi-positional return air with factory-supplied duct flanges allows easy installation in new-build or retrofit projects. An externally mounted control box provides eye-level access to controls for ease of activation and maintenance. All units are test run at the factory and delivered ready to install and commission.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 191

ICE

Model: ECUA90/20/150 vertical package air conditioner

Footprint (in inches): 50 (length) by 43 (width) by 96 (height)

Serviceability features: A hinged front door, which opens to left or right, facilitates access to the control box and evaporator motor and coil. Refrigerant service valves come standard. LEDs indicate operational status and fault conditions, and a sight glass indicates correct refrigerant charge. A front control box allows easy access and complies with National Electrical Code (NEC) clearance codes.

Technical support: Available 8 a.m. to 5 p.m. Eastern time, weekdays. A service line is available 24/7 for afterhours support.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Two-inch pleated air filter is supported. Easy-to-clean foil-back insulation is included on the indoor air path.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The unit is designed for use in industrial applications for cooling electronic equipment. The package a/c will operate in temperatures up to 131°F and down to 0°. A phase and voltage monitor, hot-gas bypass valve, internal overloads on all motors, and high- and low-pressure switches come standard. Supply and return openings match many competitive models.

Warranty information: A one-year all-parts warranty is available.

Special installation requirements: None. Stainless steel lifting brackets are provided with the air conditioner.

Contact: Industrial Climate Engineering, 229-273-9558; www.acice.com.

eProduct 192

ICP Commercial

Model: RGH 181-303 package gas/electric unit

Footprint (in inches): 128-158 (length) by 86 (width) by 49-57 (height)

Serviceability features: IGC solid-state control for on-board diagnostics with LED error-code designation, burner control logic, and energy-saving indoor fan motor delay come standard. All connections and troubleshooting points are located on the master terminal board. Units feature through-the-base utility connection capabilities. Access panels have easy-grip handles and a no-strip screw feature.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goicpcommercial.com.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation capability (DCV).

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Energy Star-qualified unit features two-stage cooling with independent circuits and controls. Dedicated vertical or horizontal airflow duct configuration models are available. Other features include high- and low-pressure switches, and the scroll compressor has internal line-break overload protection. A high-static indoor fan, economizers, a variable frequency drive two-speed fan, and hot gas re-heat system are available as factory-installed options.

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goicpcommercial.com.

eProduct 193

Model: RHX package heat pump

Footprint (in inches): 74 (length) by 47 (width) by 34-41 (height)

Serviceability features: An advanced terminal board and simplified control box arrangement is available for safety circuit troubleshooting. Through-the-bottom power entry capability comes standard. Single-point electric connections allow for easy installation. Access panels with easy-grip handles, easy-start, and no-strip screw features are included. The unit also features a direct-drive electronically commutated motor (ECM) with standard indoor motor and optional belt drive systems.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.goicpcommercial.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified unit achieves up to 14.3-SEER/12.2-EER single-stage electric cooling and up to 8.2-HSPF electric heating. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, a high-efficiency ECM indoor blower motor, and a factory-installed economizer option. Field-installed accessory roof curbs fit flush with the bottom of the unit.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goicpcommercial.com.

eProduct 194

Johnson Controls

Model: Series 5 rooftop gas/electric, electric/electric, and heat pump units

Footprint (in inches): 82 (length) by 45 (width) by 33 (height)

Serviceability features: The unit includes Simplicity SE; smart equipment controls with an LCD display; and supply, return, and outdoor temperature sensors. Wireless access to unit information is available via a smartphone, tablet, laptop, or PC. Other features include filter, electrical, refrigerant ports, and adjustable belt drive pulleys.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Tech guides, installation manuals, parts lists, and accessory instructions are available at www.jci.com or www.upgnet.com.

Noise-reduction features: A scroll compressor and microchannel condenser coil help reduce noise.

IAQ equipment supported: Two-inch standard or 2-inch MERV-7 pleated filters, a CO2 demand control ventilation option, and stainless steel drain pan option are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Simplicity SE control includes standard temperature sensors and an LCD display. Wireless capability is available for start-up, commissioning, and monitoring. New 14-SEER models are in the same cabinet and footprint as prior generations of the product. The unit can be used to replace existing JCI products in the same footprint/curb size dating back to the mid-1980s.

Warranty information: Five-year compressor, one-year parts, 10-year aluminized heat exchanger, 15-year stainless steel heat exchanger, and three-year E-coat indoor and outdoor coil warranties are available.

Special installation requirements: The units utilize scroll compressors with intertwined copper/aluminum evaporator coils and microchannel condenser coils (does not apply to heat pumps).

Contact: Johnson Controls Inc., 405-419-6557; www.jci.com.

eProduct 195

Lennox Industries

Model: Energence® ultra-high-efficiency rooftop units

Footprint (in inches): 133 (length) by 91 (width) by 55 (height) or 147 (length) by 61 (width) by 47 (height)

Serviceability features: Isolated compressor compartment allows quick refrigerant charge confirmation without disrupting condenser section airflow. Slide-out blower makes cleaning the blower wheel and belt tensioning, adjustment, or replacement quicker and easier. Accessible gas compartment allows ample access to all gas components. Hinged access panels provide quick access to components — enabling easier maintenance and service by the technician. Prodigy 2.0 provides reporting through the patent pending USB port. Service codes are provided to the service technician to assist in maximizing system operation, speedy service and easy maintenance. Prodigy web-ap guides service technicians who might not be familiar with Energence features through the operation, service and maintenance of the system.

Technical support: Available at 800-453-6669. Application support is available 7:30 a.m. to 5 p.m. Central time, Monday through Friday.

Technical support materials: Documents available at www.lennoxcommercial.com.

Noise-reduction features: Isolated compressors, variable speed outdoor fans, and the insulated base all assist in reducing operating sound.

IAQ equipment supported: MERV 8 or 13 filters are available as a factory or field-installed option that provide an enhanced level of IAQ, and can help the building air quality for additional LEED credits. Healthy Climate® UVC germicidal lamps and CO2 sensors are also available.

Thermostat compatibility: Compatible with most thermostats, plus offers BACnet and LonTalk options for connectivity to Building Automation Systems.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Industry efficiency leadership with up to 13.9 EER and up to 21.5 IEER – for packaged units 7 ½ - 20 tons. Four of the 5 models meet or exceed 20 IEER (part load efficiency). Designed to address the needs of the replacement and new construction markets, these models fit on similar capacity Landmark, Energence, L and T class footprints.

Warranty information: Fifteen-year limited stainless steel heat exchanger; 10-year limited warranty aluminized gas heat exchanger; five-year limited compressor; and one-year limited covered components.

Special installation requirements: None.

Contact: Lennox Industries Inc., www.lennoxcommercial.com. 

LG Electronics USA

Model: Multi V IV 460V heat recovery, ARUB504DTE4

Footprint (in inches): 30 (length) by 49 (width) by 66 (height)

Serviceability features: Monitoring View Service software provides accurate pictures of the operating system without the need to manually check system temperatures, access the refrigerant circuit for system pressures, or perform time-consuming resistance and voltage tests. Technicians can quickly check component operation as part of an annual or semi-annual maintenance program.

Technical support: Support is available 8 a.m. to 6 p.m. Central time, weekdays, at 888-865-3026.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and startup instructions are included.

Noise-reduction features: Designed to operate at low sound levels, allowing the unit to be installed virtually anywhere. It incorporates indoor units that can operate at sound levels as quiet as 23 dBA at low speed, ensuring a comfortable, quiet environment for all occupants.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: As a 42-ton triple-frame variable refrigerant flow (VRF) unit, larger capacities can be reached with less equipment and wiring. This unit provides engineers with more tonnage in a small equipment footprint. The system saves on the cost of ducts, distribution fans, water pumps, and water piping.

Warranty information: A standard one-year parts warranty is available on qualified systems. An additional five-year compressor warranty is also available. Standard one-year parts warranty extends to two years and a six-year compressor warranty extends to seven years on qualified systems that have a completed commissioning report submitted to LG with two hours of LGMV data.

Special installation requirements: None.

Contact: LG Electronics USA, 312-397-6068; www.lg-dfs.com.

eProduct 196

Luxaire

Model: Optimum packaged rooftop

Footprint (in inches): 82 (length) by 45 (width) by 33 (height)

Serviceability features: The unit includes Simplicity SE; smart equipment controls with an LCD display; and supply, return, and outdoor temperature sensors. Wireless access to unit information is available via a smartphone, tablet, laptop, or PC. Other features include filter, electrical refrigerant ports, and adjustable belt drive pulleys.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Tech guides, installation manuals, parts lists, and accessory instructions are available at www.luxaire.com or www.upgnet.com.

Noise-reduction features: Scroll compressor and microchannel condenser coil help reduce noise.

IAQ equipment supported: Two-inch standard or 2-inch MERV-7 pleated filters, CO₂ demand control ventilation option, and stainless steel drain pan option are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Simplicity SE control includes standard temperature sensors and an LCD display. Wireless capability is available for start-up, commissioning, and monitoring. New 14-SEER models are available in the same cabinet and footprint as prior generations of the product. The unit can be used to replace existing UPG products in the same footprint/curb size dating back to the mid-1980s.

Warranty information: Five-year compressor, one-year parts, 10-year aluminized heat exchanger, 15-year stainless steel heat exchanger, and three-year E-coat indoor and outdoor coil warranties are available.

Special installation requirements: The units utilize scroll compressors with intertwined copper/aluminum evaporator coils and microchannel condenser coils (does not apply to heat pumps).

Contact: Johnson Controls Inc., 405-419-6557; www.luxaire.com.

eProduct 197

Model: Eclipse™ rooftop unit, ZX and ZY

Footprint (in inches): 74-88 (length) by 49-62 (width) by 33-49 (height)

Serviceability features: The unit features tool-less air filter access, easily convertible from 2- to 4-inch filters, and offers a microprocessor control with an LED display that provides unit status, start-up, and commissioning features; unit setup, supply, return, and outdoor air temperatures; and plug-and-play accessories. The control box is easily accessible and the unit features a gas heating section.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Product information available on www.joinluxaire.com or www.upgnet.com.

Noise-reduction features: A quiet single- and dual-scroll compressor offering with fully insulated cabinet and embossed unit top provides noise reduction for quiet operation.

IAQ equipment supported: Two- or 4-inch air filters, rated up to MERV 13, are a factory option or can be installed in the field with the 2- to 4-inch standard, convertible filter rack. Factory- or field-installed smoke detectors are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The product features a simple-to-use microprocessor control providing advanced features well above and beyond electromechanical controls. Improved, embossed top panels provide a durable, rigid cabinet for longevity and noise reduction. Heavy base rails allow for transport without base damage.

Warranty information: Five-year part and compressor (3-5 ton), one-year parts, five-year compressor (6-12.5 ton), 10-year aluminized, and 15-year stainless steel heat exchanger warranties are available. Extended warranties are also available.

Special installation requirements: The new packaged product is available in 3- to 12.5-ton sizes and provides a platform that easily fits on many existing unit roof curbs without the need for an adapter curb.

Contact: Johnson Controls Inc., 405-419-6557; www.luxairehvac.com.

eProduct 198

Mammoth

Model: HydroBank MS water-source heat pump

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Easy-to-remove access panels allow service of all major components without removing the unit from the ceiling. A removable orifice ring helps facilitate motor replacement. All major electrical components are located inside the control box for convenient electrical service access. The unit’s Schrader valves are easily accessed for refrigerant charging or testing.

Technical support: Contact a local Mammoth representative or visit www.mammoth-inc.com and click on the Find a Rep link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Cabinets are fully insulated with 1/2-inch, dual-density fiberglass. Closed-cell foam is an option for high-IAQ applications. Compressors are internally spring-isolated with a 10-gauge steel mass plate underneath to isolate both noise and vibration. An insulated divider panel between the compressor and air-handling sections minimizes compressor noise transmission.

IAQ equipment supported: A factory-installed, four-sided, 2-inch filter rack is available as an option to accept high-efficiency filters such as MERV 8 or MERV 13. Gaskets between the rack, cabinet, and the filter access door maintain the leakage rate below 4 cfm per square foot of filter area at ½-inch external static pressure (ESP).

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: The unit is designed specifically for developer, new-construction, and replacement markets where compact design and a low first cost are primary considerations. Cabinet dimensions make the MS model one of the smallest available and ideal for the replacement of existing water-source heat pumps.

Warranty information: A standard 12-month warranty is available from startup or 18 months from shipping (whichever occurs first). Extended second- through fifth-year warranty options are available to cover some or all components, based on requirements, and with or without labor allowances.

Special installation requirements: None.

Contact: Mammoth, 952-358-6632; www.mammoth-inc.com.

eProduct 199

Marvair

Model: ASDCA wall-mount package air conditioner

Footprint (in inches): 37 (length) by 17 (width) by 69 (height)

Serviceability features: Refrigerant access valves come standard, front control panel allows easy access and complies with National Electrical Code (NEC) clearance codes on side-side installations, LEDs indicate operational and fault status, foil-back insulation facilitates cleaning, all major components are easily accessible, and a 2-inch pleated filter is changeable from the outside.

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time, weekdays. A 24/7 service line is available for afterhours support.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: Insulated cabinet and low-noise scroll compressor help reduce noise levels.

IAQ equipment supported: Two-inch pleated air filters are supported.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Units are used to cool telecommunications sites. A 48-vdc indoor blower motor allows emergency ventilation in the event of loss of utility power. A factory-installed full-flow economizer provides the same airflow as in mechanical cooling. Integral pressure relief eliminates the need for building penetrations.

Warranty information: Five-year compressor and one-year parts warranties are available. Extended warranties are also available.

Special installation requirements: The CoolLinks controller sequences the operation of two units to ensure the most energy-efficient operation. An Ethernet connection is provided for a simple network management protocol (SNMP) interface through which the Network Operations Center can receive alarms, monitor/change set points, and monitor the HVAC units and the shelter operational parameters.

Contact: Marvair, 229-273-3636; www.marvair.com.

eProduct 200

Mitsubishi Electric US Cooling & Heating Division

Model: PVFY multi-position air handler

Footprint (in inches): 22 (length) by 17-25 (width) by 50-60 (height)

Serviceability features: Components are embossed for easy identification. Convenient front, side, and top panels allow for easy access to serviceable components. For installations in extra-tight spaces, the PVFY cabinet can be fully disassembled to offer easier maintenance and servicing.

Technical support: Available 8 a.m. to 7 p.m. Eastern time, weekdays, at 800-433-4822.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; and startup instructions are included.

Noise-reduction features: The highly efficient dc motor and a forward-curved blower ensure quiet operation, even with varying input voltages. The variable fan unit runs at partial speed for lower sound levels.

IAQ equipment supported: A washable polypropylene honeycomb filter is supported.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The air handler can be installed vertically, horizontally, left, or right. It requires no additional kits, even for down-flow configuration. The R-4.2 insulation value prevents thermal penetration into the coil section, and less than 1 percent air leakage improves performance. Selectable external static pressures are available up to 0.80, which supports longer duct runs.

Warranty information: Five-year warranty is available.

Special installation requirements: None.

Contact: Mitsubishi Electric US Cooling & Heating Division, 202-625-2515; www.mehvac.com.

eProduct 201

Panasonic

Model: U-120ME2U9 heat pump

Footprint (in inches): 46 (length) by 39 (width) by 73 (height)

Serviceability features: The unit includes dual large-capacity inverter compressors, energy saving performance, exceptional flexible piping design, and extended operating range. The unit can support up to 40 indoor unit connections.

Technical support: Support is available 8 a.m. to 8 p.m. Eastern time at 800-851-1235.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; submittal sheets; Web training, 800-number service/troubleshooting; classroom training; training videos; an HVAC dealer network; and an HVAC distributor network are available.

Noise-reduction features: A quiet mode helps reduce noise levels.

IAQ equipment supported: Ducted indoor units can accommodate up to MERV-13 filtration as well as the ability to introduce a high percentage of fresh air into the system.

Thermostat compatibility: The unit requires a special thermostat.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The heat pump is capable of modulating output based on the heating and cooling requirements within the building.

Warranty information: Six-year compressor and one-year parts warranties are available.

Special installation requirements: Installers must have attended training in Kennesaw, Georgia; or Harrison, New Jersey. Online training is also available.

Contact: Panasonic Air Conditioning Group, 201-392-4193; www.us.panasonic.com/aircon.

eProduct 202

Reznor

Model: DF6SF iHybrid™ heat pump/dual fuel system

Footprint (in inches): 56 (length) by 48 (width) by 39 (height)

Serviceability features: The iHybrid includes externally accessible high-flow service ports, easy compressor and control access, and easy access to a factory-installed, conveniently located filter drier.

Technical support: Support is available from a local factory agent during normal (local) business hours. Backup factory support is also available. For technical questions, call 800-695-1901.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; and specification sheets are included.

Noise-reduction features: Compressor sound blankets come standard. A swept-wing fan blade combined with a custom venturi condenser fan provides quiet operation.

IAQ equipment supported: An electronically commutated motor (ECM) variable-speed blower motor allows the motor to automatically adjust to different static loads, supports quiet operation, and boasts improved IAQ. This system has dehumidification capabilities from the thermostat or duct-mounted humidistat.

Thermostat compatibility: The unit is compatible with most
thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The unit offers continuous comfort and optimum energy usage in all weather conditions.

Warranty information: A standard Reznor warranty applies. An additional extended warranty is available.

Special installation requirements: A rooftop or pad mount is necessary for installation.

Contact: Reznor/Nortek Global HVAC, 800-695-1901; www.reznorhvac.com.

eProduct 203

Model: R6GI iQ Drive package HVAC system

Footprint (in inches): 56 (length) by 47 (width) by 39 (height)

Serviceability features: A two-digit LED provides system operation, status, and diagnostic troubleshooting information. A hinged access panel is provided for easy access to all controls and the compressor. External service ports allow the contractor to read pressures without removing panels. A removable top-grille assembly provides service access from the top without disconnecting fan motor leads.

Technical support: Reznor agents are available during normal business hours. Additional factory support is available, if required. Technical support is also available by calling 800-695-1901.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: A swept-wing fan blade, compressor sound blanket, discharge muffler, and variable-speed condenser fan motor help reduce noise.

IAQ equipment supported: This system has dehumidification capabilities from a thermostat or duct-mounted humidistat. Motorized and manual fresh-air dampers are also available.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Five stages of modulation are available with a standard two-stage thermostat, and 29 diagnostic codes for fault and warning conditions are provided through a two-character LED display. Precise refrigerant superheat control is provided by an electronic expansion valve (EXV). An ad-
vanced electronically commutated motor (ECM) provides 16 field-selectable cooling speeds and eight heating speeds.

Warranty information: The standard Reznor warranty applies. Optional extended warranties are available.

Special installation requirements: A roof or slab mount is necessary for installation.

Contact: Reznor/Nortek Global HVAC, 800-695-1901; www.reznorhvac.com.

eProduct 204

Rheem

Model: RGEA14 package gas/electric convertible airflow unit

Footprint (in inches): 53 (length) by 48 (width) by 36-41 (height)

Serviceability features: This unit allows easy and fast access to the control box, furnace compartment, and slide-out blower. The refrigerant connections are also conveniently located for trouble-free service. It has molded compressor plugs, which prevent miswirings and simplifies service.

Technical support: Available 8 a.m. to 5 p.m. Central time, weekdays, at 479-648-6237, or at www.myrheem.com 24/7 for more information, such as FAQs, literature, spec sheets, etc.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: This unit features scroll compressors for maximum efficiency and quiet operation. It also includes isolation compressor grommets to reduce vibration noise. The draft inducer motor is located inside the easily accessible furnace compartment. This motor is specially designed for quiet, reliable operation.

IAQ equipment supported: Multiple motor speeds are available for humidity control, which helps improve IAQ.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: This product line incorporates microchannel technology for both the evaporator and condenser coils, resulting in superior heat transfer, airflow, and overall performances while using less refrigerant. This unit is also engineered to meet the latest regional standards requirements.

Warranty information: Ten-year conditional parts (one-phase residential, registration required); 10-year compressor (one-phase, residential), five-year compressor (one- and three-phase commercial); and one-year parts (commercial) warranties are available.

Special installation requirements: None. This unit follows standard installation procedures.

Contact: Rheem Mfg. Co.; www.rheem.com.

eProduct 205

Ruud

Model: RGEA14 package gas/electric convertible airflow unit

Footprint (in inches): 53 (length) by 48 (width) by 36-41 (height)

Serviceability features: This unit allows easy and fast access to the control box, furnace compartment, and slide-out blower. The refrigerant connections are also conveniently located for trouble-free service. It has molded compressor plugs, which prevent miswirings and simplifies service.

Technical support: Available 8 a.m. to 5 p.m. Central time, weekdays, at 479-648-6237, or at www.myruud.com 24/7 for more information, such as FAQs, literature, spec sheets, etc.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: This unit features scroll compressors for maximum efficiency and quiet operation. It also includes isolation compressor grommets to reduce vibration noise. Inside the easily accessible furnace compartment is the draft inducer motor. This motor is specially de-
signed for quiet reliable operation.

IAQ equipment supported: This unit has multiple motor speeds available for humidity control, which helps improve IAQ.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: These products incorporate microchannel technology for both the evaporator and condenser coils, resulting in exceptional heat transfer, airflow, and overall performances while using less refrigerant. This unit is also engineered to meet the latest regional standards requirements.

Warranty information: Ten-year conditional parts (one-phase residential, registration required); 10-
year compressor (one-phase, residential); five-year compressor (one- and three-phase commercial); and one-year parts (commercial) warranties are available.

Special installation requirements: None, this unit follows standard installation requirements

Contact: Ruud; www.ruud.com.

eProduct 206

Tempstar

Model: RHH 036-072 package heat pump

Footprint (in inches): 74-116 (length) by 46-63 (width) by 33-57 (height)

Serviceability features: Access panels with easy-grip handles provide quick and easy access to the blower and blower motor, control box, and compressors. A no-strip screw feature has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal. A newly designed terminal board facilitates simple safety circuit troubleshooting and a simplified control box arrangement.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.gotempstar.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: This Energy Star-qualified heat pump is field-convertible for vertical or horizontal airflow duct configurations. The unit features high- and low-pressure switches, and a scroll compressor has internal line-break overload protection. A high-static indoor fan and economizers are available as factory-installed options.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gotempstar.com.

eProduct 207

Model: RHX package heat pump

Footprint (in inches): 74 (length) by 47 (width) by 34 to 41 (height)

Serviceability features: An advanced terminal board and simplified control box arrangement allows for safety-circuit troubleshooting. Through-the-bottom power entry capability comes standard. Single-point electric connections allow for easy installation. The unit includes access panels with easy-grip handles and easy-start, no-strip-screw features. A direct-drive electronically commutated motor (ECM) comes standard with indoor motor and optional belt drive systems.

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting. ICP technical training is available at field schools held at participating
distributor locations.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and additional product information is available at www.gotempstar.com.

Noise-reduction features: A fully insulated cabinet helps reduce noise.

IAQ equipment supported: Two-inch return air filters are supported. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide demand controlled ventilation (DCV) capability.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified unit achieves up to 14.3-SEER/12.2-EER single-stage electric cooling and up to 8.2-HSPF electric heating. The unit features field-convertible airflow, high- and low-pressure switches for added compressor reliability, a high-efficiency ECM indoor blower motor, and a factory-installed economizer option. Field-installed accessory roof curbs fit flush with the bottom of the unit.

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available — see the warranty certificate for complete details and restrictions.

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gotempstar.com.

eProduct 208

Tetco

Model: TVS/TVT ION Series compact water-to-air vertical package geothermal heat pump

Footprint (in inches): 22 (length) by 22 (width) by 37 (height)

Serviceability features: Most commonly accessed components can be reached via a front cabinet, including a desuperheater, reversing valve, blower motor, refrigerant ports, a thermostatic expansion valve (TXV), and a filter drier. A hinged control box easily tilts out of the way for access to internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

Technical support: Support is available 24/7 by calling 618-664-9010 or emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, emailing training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provide superior compressor and blower motor isolation. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or pre-painted sheet metal cabinet is engineered and built to meet industry leakage guidelines.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating air coil failure caused by formicary corrosion. A foam-insulated, flat-wound, enhanced-surface coaxial heat exchanger improves heat transfer, improving efficiency. Standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated motor (ECM) blower (two-stage) offer higher efficiency. ECM motors are optional on single-stage units. Commercial voltages are also available.

Warranty information: A standard one-year parts-only warranty provides coverage. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are available.

Special installation requirements: Field-selectable, multi-positional return air and factory-supplied duct flanges allow easy installation in new-build or retrofit projects. An externally mounted control box provides eye-level access to controls for ease of activation and maintenance. All units are test run at the factory and delivered ready to install and commission.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 209

Model: TYT ES5 Series vertical water-to-air package geothermal heat pump

Footprint (in inches): 30 (length) by 25 (width) by 54 (height)

Serviceability features: Improved digital controls can be mounted on the top or side of the unit in either a left- or right-hand return position. The control box has a status window that allows for visibility of the unit’s status lights without opening the cover. All cabinet panels are removable for ease of service.

Technical support: Available 24/7 by calling 618-664-9010 or emailing technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting
www.geothermaluniversity.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and installation instruction videos are available.

Noise-reduction features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage scroll compressor from the unit. Internal copper tubing employs an enhanced shock loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

IAQ equipment supported: A field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners (EACs) with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with all Enertech products.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: A multi-positional cabinet is field convertible to a left- or right-hand return. An all-aluminum microchannel air coil eliminates air coil failure caused by formicary corrosion. A foam-insulated, enhanced-surface coaxial heat exchanger protects against moisture and improves performance. A variable-speed electronically commutated motor (ECM) blower matches to the ductwork, delivering optimum airflow. Commercial voltages are also available.

Warranty information: A standard one-year parts-only coverage warranty is available. Five-year electrical parts-only, five-year refrigerant parts-only, and five-year internal parts-only warranties are also available.

Special installation requirements: Field-selectable multi-positional return air with factory-supplied duct flanges allow easy installation in new-build or retrofit projects. An externally mounted control box provides eye-level access to controls for ease of activation and maintenance. All units are test-run at the factory and delivered ready to install and commission.

Contact: Enertech Global LLC, 618-690-3236; www.enertechgeo.com.

eProduct 210

Trane

Model: Sintesis™ RTAF air-cooled chiller

Footprint (in inches): 20-53 (length) by 88 (width) by 100 (height)

Serviceability features: Chillers are designed to make maintenance duties easier, safer, and less frequent with features like the transverse open-V design condenser coils that allow easier cleaning from the inside out.

Technical support: Contact a local account manager or visit www.trane.com/sintesis.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a troubleshooting guide; and specification sheets are included.

Noise-reduction features: Multiple sound-reduction options are available, allowing customers to choose a factory-installed acoustic treatment that best meets their exact needs. In addition, a noise-reduction option is available to comply with nighttime/weekend neighborhood noise restrictions.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Chillers are part of the Ingersoll Rand EcoWise™ portfolio and can operate with either R-134a or DuPont Opteon® XP-10 (R-513A).

Warranty information: One- through five-year system and optional 10-year compressor warranties are available.

Special installation requirements: Manufacturer did not specify.

Contact: Trane, an Ingersoll Rand brand, 908-251-5858; www.trane.com.

eProduct 211

Model: Water-source VRF ductless system

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Manufacturer did not specify.

Technical support: Contact a local account manager or visit www.trane.com/watersourcevrf.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a troubleshooting guide; and specification sheets are included.

Noise-reduction features: The unit doesn’t require an outdoor fan or hermetically sealed case.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: High-performance variable-speed compressors deliver efficiency ratings of up to 30.1 IEER and 27.4 SCHE while providing up to 48 ton of capacity. Innovative variable refrigerant flow (VRF) design improves reliability and increases system longevity while using less energy. Connect systems to a traditional cooling tower or combine them to achieve optimal efficiency.

Warranty information: Manufacturer did not specify.

Special installation requirements: Manufacturer did not specify.

Contact: Trane, an Ingersoll Rand brand, 704-655-5562; www.trane.com.

eProduct 212

WaterFurnace Intl. Inc.

Model: Envision2 Series NXW chiller

Footprint (in inches): 43 (length) by 24 (width) by 57 (height)

Serviceability features: A heavy-gauge, galvanized steel enclosure with hinged access panels can easily be removed. An externally accessible, factory-installed pressure/temperature port is included. Two Schrader service ports are provided for each circuit, a lockout/tagout feature helps keep the unit off during service, and a keyed service door features a low-voltage emergency stop button with an optional factory-mounted disconnect switch.

Technical support: Support is available at 800-257-5667.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

Noise-reduction features: The heavy-gauge insulated sheet metal cabinet helps to reduce noise. An optional IntelliStart three-phase soft starter will reduce the normal start current (LRA) by 40 percent. Using IntelliStart also provides a substantial reduction in vibration, reduces startup noise, and improves the compressor’s start behavior (available on NXW120-240, 460/60/3 units only).

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: Available in 10- to 50-ton capacities, the NXW fits through most doors and features external fork truck lifting points for easy installation. Designed to perform to the highest standards in the industry, the NXW is used for pools, commercial aquariums, radiant floor heating, ice melt, chilled water applications, industrial process water, or to provide precisely heated or cooled water for fan coils or other applications.

Warranty information: An 18-month parts-only warranty is available.

Special installation requirements: None.

Contact: WaterFurnace Intl. Inc., 260-478-5667; www.waterfurnace.com.

eProduct 213

York

Model: Prestige™ rooftop unit, ZX and ZY

Footprint (in inches): 74-88 (length) by 49-62 (width) by 33-49 (height)

Serviceability features: The unit features tool-less air filter access, is easily convertible from 2- to 4-inch filters; offers microprocessor control with an LED display providing unit status, startup and commissioning features; unit setup, supply, return, and outdoor air temperatures, and plug and play accessories. The control box and gas heating section are easily accessible.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Product information is available on www.york.com or www.upgnet.com.

Noise-reduction features: A quiet single and dual-scroll compressor offering with a fully insulated cabinet and embossed unit top provides noise reduction for quiet operation.

IAQ equipment supported: Two- or 4-inch air filters, up to MERV 13, are a factory option or can be installed in the field with the 2- to 4-inch standard, convertible filter rack. Factory- or field-installed smoke detectors are also supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

Additional features: The product features a simple-to-use microprocessor control, providing advanced features well above and beyond electromechanical controls. Improved, embossed top panels provide a durable, rigid cabinet for longevity and noise reduction. Heavy base rails allow for transport without base damage.

Warranty information: Five-year part and compressor (3-5 ton), one-year parts, five-year compressor (6-12.5 ton), 10-year aluminized, and 15-year stainless steel heat exchanger warranties are available. Extended warranties are also available.

Special installation requirements: The new packaged product, available in 3- to 12.5-ton sizes, provides a platform that easily fits on many existing unit roof curbs without the need for an adapter curb.

Contact: Johnson Controls Inc., 405-419-6557; www.york.com.

eProduct 214

Model: Sunline 3-5 ton rooftop gas/electric, electric/electric, and heat pump units.

Footprint (in inches): 82 (length) by 45 (width) by 33 (height)

Serviceability features: Includes Simplicity SE; smart equipment controls with an LCD display; and supply, return, and outdoor temperature sensors. Wireless access to unit information is available via a smartphone, tablet, laptop, or PC. Filter, electrical, and compressor access panels are provided. The unit also includes external refrigerant ports and adjustable belt drive pulleys.

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 877-874-7378.

Technical support materials: Tech guides, install manuals, parts lists, and accessory instructions are available at www.york.com or www.upgnet.com.

Noise-reduction features: A scroll compressor and microchannel condenser coil help reduce noise levels.

IAQ equipment supported: Two-inch standard or 2-inch MERV-7 pleated filters, CO2 demand control ventilation (DCV) option, and stainless steel drain pan option are supported.

Thermostat compatibility: The unit is compatible with most thermostats.

Replacement parts compatibility: The unit shares replacement parts with other models.

Additional features: The Simplicity SE control features standard temperature sensors and an LCD display. Wireless capability is provided for start-up, commissioning, and monitoring. New 14-SEER models are in the same cabinet and footprint as prior generations of the product. Units can be used to replace existing JCI products in the same footprints/curb sizes dating back to the mid-1980s.

Warranty information: Five-year compressor, one-year parts, 10-year aluminized heat exchanger, 15-year stainless steel heat exchanger, and three-year E-coat indoor and outdoor coil warranties are available.

Special installation requirements: The units utilize scroll compressors with intertwined copper/aluminum evaporator coils and microchannel condenser coils (does not apply to heat pumps).

Contact: Johnson Controls Inc., 405-419-6557; www.york.com.

eProduct 215

Publication date: 5/4/2015