CommercialHeatingShowcase

 

 

 

 

Allied Commercial

 

Model: Z-Series ZGA/ZCA072 packaged unit

 

Footprint (in inches): 76 (length) by 47 (width) by 37 (height)

 

Serviceability features: Easy component access takes the hassle out of service. Filter replacements are a part of routine maintenance procedures, and simplified filter access requires no tools. The unit uses four filters instead of two, making each one easier to install without bending. The unit is also designed with an easily accessible panel around the compressor. A hinged panel covers the access opening when gauges are connected, granting a more accurate representation of airflow and reading of refrigerant charge.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time. For general inquiries, call 800-448-5872. For application support, call 866-282-7257.

 

Technical support materials: Installation, operation, and maintenance manuals and specification sheets are available

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The rooftop units feature one of the most popular footprints in the commercial industry, which eliminates the need for an adaptor curb in many replacement jobs and allows installers to utilize existing utility connections, resulting in easier installation and savings of up to $1,500 on the total job cost.

 

Warranty information: Ten-year limited aluminized gas heat exchanger, five-year limited compressor, three-year limited Eco-Last coil system, and one-year limited covered components warranties are available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Allied Commercial, 800-448-5872; www.allied-commercial.com.

 

eProduct 160

 

Arcoaire

 

Model: RGH090-150 packaged gas/electric unit

 

Footprint (in inches): 88-116 (length) by 60-63 (width) by 49-57 (height)

 

Serviceability features: An IGC solid-state control offers on-board diagnostics with an LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. The units also feature through-the-base utility connections. Access panels have easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goarcoaire.com.

 

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: These Energy Star-qualified units feature field-convertible airflow and high- and low-pressure switches. Dual scroll compressors have internal line-break overload protection. High-, medium-, and low-heat options and medium- and high-static indoor fan options are included. Other market-driven options, such as liquid propane/high-altitude kits, are available.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goarcoaire.com.

 

eProduct 161

 

Model: RGX036-060 packaged gas/electric unit

 

Footprint (in inches): 74 (length) by 47 (width) by 33-41 (height)

 

Serviceability features: The IGC solid-state control offers on-board diagnostics with an LED error code designation, burner control logic, and an energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. The units feature through-the-base utility connections. Access panels also feature easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goarcoaire.com.

 

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The units feature field-convertible airflow, high- and low-pressure switches, single-stage cooling, and two-stage gas heat. High-, medium-, and low-heat options and medium- and high-static indoor fan options are included. Other market-driven options, such as liquid propane/high-altitude kits, are available.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goarcoaire.com.

 

eProduct 162

 

Bard

 

Model: WGS Series step-capacity gas/electric wall-mount unit

 

Footprint (in inches): 27 (length) by 42 (width) by 87-97 (height)

 

Serviceability features: All service and maintenance is performed outside the building, consuming no interior floor space. Additional service features include a step-capacity compressor, a multi-speed blower motor, and high- and low-pressure switches. Ventilation package options may be factory- or field-installed. An 18-gauge stainless steel tubular heat exchanger, a hinged service door allowing easy access to air filters, an advanced in-shot burner design, and an integrated DSI control are included. The versatile units satisfy ducted or non-ducted applications.

 

Technical support: Support is available through Bard’s local distribution network.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: A step-capacity compressor with sound cover, compressor isolation base, electronically commutated (EC) indoor blower motor, and advanced design in-shot burners help reduce operational noise.

 

IAQ equipment supported: Ventilation options include an energy recovery ventilator (ERV), economizer, and a commercial room ventilator.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The series features a multi-step capacity compressor with R-410A and ventilation package options. Its space-saving design is ideal for versatile applications, such as new construction, modular applications, school modernization, portable structures, retail stores, correctional facilities, and other commercial applications.

 

Warranty information: Five-year parts and 10-year heat exchanger warranties are available.

 

Special installation requirements: Low-NOx models are available. High-altitude kits are available and the units and models are approved for use in Canada.

 

Contact: Bard Mfg. Co. Inc., 419-636-1194; www.bardhvac.com.

 

eProduct 163

 

Bosch

 

Model: FHP LV split systems

 

Footprint (in inches): 33 (length) by 26 (width) by 21 (6T condensing section) (height)

 

Serviceability features: All units are designed to be serviced from the front of the unit. Schrader valves are included in the high- and low-pressure gauges, and the electrical box components are easily accessible for diagnosing and servicing. Large removable panels aid in servicing the unit, when necessary. Separate electrical knockouts in the unit’s corner post allow for easy and safe routing of high- and low-voltage lines to the inside of the cabinet.

 

Technical support: Support is available at 866-642-3198.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: The unit’s electronically commutated motors (ECMs) are extremely quiet. Airflow can be adjusted to suit a specific installation and ensure the highest level of comfort. All LV split condensing sections have a unique floating-base compressor that is mounted on a heavy steel plate, which rests on a high-density rubber pad on the base of the unit. In addition, compressors are mounted on rubber grommets. This double isolation prevents vibration and noise transmission from the compressor to the unit structure. The condensing section may include a compressor blanket, fiberglass insulation, or ½-inch-thick, closed-cell foam insulation. The LV split air-handler section offers optional ½-inch-thick, closed-cell foam insulation on all unit sizes.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The split system is offered in addition to packaged models. The LV split condensing section can be placed 75 feet one-way remotely from the air-handler section, which allows for the unit installation to be in locations where space is limited. Multiple condensing units may be centrally located. The system features DuoGuard™-coated evaporator coils as an option, stainless steel drain pans to ensure a long life, and a G90 galvanized steel cabinet that provides an anti-corrosive finish as standard.

 

Warranty information: One-year parts and five-year limited compressor warranties are available.

 

Special installation requirements: The location of the air handler can be concealed within a variety of areas inside the building where it will connect to air and ventilation ducts to deliver comfortable air. Air-handling sections are available in vertical or horizontal configurations from 1.5-6 ton.

 

Contact: Bosch Thermotechnology Corp., 800-283-3787; www.boschheatingandcooling.com.

 

eProduct 164

 

Bryant

 

Model: 580J Legacy™ packaged rooftop

 

Footprint (in inches): 128-158 inches (length) by 87 inches (width) by 49-57 inches (height)

 

Serviceability features: Standardized components and controls make service easier. Fast-access, handled panels provide easy access on normally accessed service panels. A no-strip screw system guides screws into panels and captures them tightly without stripping the screw, the panel, or the unit.

 

Technical support: Support is available through a nationwide network of local distributors.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available. On-site technical advisory staff and commercial replacement experts training programs are available through a widespread distribution network.

 

Noise-reduction features: An isolated compressor and fan assembly with a post-and-panel cabinet design for structural rigidity and easy cleaning surfaces help reduce operational volume.

 

IAQ equipment supported: An integrated economizer includes CO2 demand-control ventilation (DCV)capability. An Optional Perfect Humidity™ dehumidification system is also available.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Units are designed for dedicated, factory-supplied, vertical- or horizontal-airflow configurations. A two-speed indoor fan system controlled by a variable frequency drive (VFD) controller is available. The cabinet design integrates a large control box that allows room to work and mount Bryant accessory controls.

 

Warranty information: Ten-year parts-only heat exchanger (aluminized), 15-year parts-only heat exchanger (stainless steel), five-year parts-only compressor, and one-year parts-only warranties are available on all other parts. Extended warranty packages are also available.

 

Special installation requirements: None.

 

Contact: Bryant Heating and Cooling Systems, 888-994-7237; www.bryant.com.

 

eProduct 165

 

Model: Legacy Line 575J07-12 split system heat pump

 

Footprint (in inches): 59 (length) by 46 (width) by 42-50 (height)

 

Serviceability features: This series is designed much like other Bryant rooftop and split-system units for easy familiarization. Units have Comfort Alert® controls for troubleshooting and diagnostics; large, organized control boxes; standardized components; a central control command center that centralizes wiring into one convenient location; easy-access handled panels; and no-strip screw technology.

 

Technical support: Support is available through local Bryant sales offices.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available. On-site technical advisory staff and commercial replacement experts training programs are available through a widespread distribution network.

 

Noise-reduction features: Rigid base rails, prop condenser fans, and isolated scroll compressors help reduce operational volume.

 

IAQ equipment supported: A matching air handler has integrated the economizer’s capability with multiple sensor options, 2-inch filters, and multiple fan performance capabilities.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The unit’s size, operation, and options make it an ideal solution for the replacement or new construction markets. The units come standard with dependable time/temp defrost controls and a refrigerant suction line accumulator.

 

Warranty information: Five-year standard limited parts compressor and one-year all other parts warranties are available. Optional extended warranties are also available.

 

Special installation requirements: None. A thermostatic expansion valve (TXV) and suction line accumulator come standard on each unit and require no field installation.

 

Contact: Bryant Heating and Cooling Systems, 888-994-7237; www.bryant.com.

 

eProduct 166

 

Carrier

 

Model: WeatherExpert™ 48N packaged rooftop unit

 

Footprint (in inches): 258-786 (length) by 140 (width) by 102 (height)

 

Serviceability features: All full-sized access panels are hinged for easy access and single-point gas or electric connection points are available. When using the Navigator™ display module, the system provides self-diagnostic testing and troubleshooting, alarm/alert monitoring, a filter maintenance alarm, and monitoring of supply air fan run time.

 

Technical support: Support is available through a nationwide network of local distributors.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available. On-site technical advisory staff and commercial replacement experts training programs are available through a widespread distribution network. Additional training is available through Carrier University. Call 800-946-2930 or visit www.carrier.com/commercial for more information.

 

Noise-reduction features: An isolated compressor and fan assembly with a cabinet constructed of double-wall foam panels provides excellent insulating properties, structural rigidity, and easy-to-clean surfaces.

 

IAQ equipment supported: Optional economizers, intertwined refrigeration circuits, an optional digital compressor, and the Humidi-MiZer® adaptive dehumidification system are supported. Double-wall foam panel construction eliminates the risk of insulation particles in the airstream, and a double-sloped, stainless steel condensate drain pan prevents standing water from accumulating.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: This efficient commercial rooftop unit features a multistage cooling compressor with Carrier’s Staged Air Volume (SAV™) system, which allows for added comfort, energy savings, and humidity control. IAQ is enhanced with optional Agion interior coating. With the use of ComfortLink controls and the belt-driven variable-frequency drive (VFD) fan system, the unit is ideal for single-zone variable-air volume  (VAV)capability.

 

Warranty information: Ten-year parts-only limited aluminized heat exchanger, 15-year parts-only limited stainless steel heat exchanger, five-year parts-only limited compressor, three-year parts-only limited ComfortLink controls, and one-year parts-only limited all other components warranties are available. Extended warranty packages are also available.

 

Special installation requirements: None. The electronic expansion valve (EXV) is factory-installed and tested.

 

Contact: Carrier Corp., 800-227-7437; www.carrier.com/commercial.

 

eProduct 167

 

Model: WeatherMaster® 50HCQ packaged rooftop unit

 

Footprint (in inches): 74-116 (length) by 47-63 (width) by 33-57 (height)

 

Serviceability features: Easily accessible handles provide access to all normally serviced components. A no-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal. Accurate pressure readings, including condenser pressure numbers, can be made without removing panels. In addition, refrigeration system pressure readings can be taken without affecting condenser airflow.

 

Technical support: Support is available through a nationwide network of local distributors.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available. On-site technical advisory staff and commercial replacement experts training programs are available through a widespread distribution network. Additional training is available through Carrier University. Call 800-946-2930 or visit www.carrier.com/commercial.

 

Noise-reduction features: An isolated compressor and fan assembly with a post-and-panel cabinet design for structural rigidity and easily cleaned surfaces help reduce operational volume.

 

IAQ equipment supported: Foil-faced insulation is utilized throughout the entire airstream, and integrated fresh air economizers feature CO2 demand-control ventilation (DCV)  capability. A non-corrosive condensate pan is internally sloped per ASHRAE standards, which prevents standing water from accumulating.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The system is designed to be easy to install, maintain, and operate with customer-requested features, including a centralized terminal board, no-strip screw collars, and handled access panels. Units are also field-convertible to horizontal airflow, and refrigerant accumulators come standard in every unit.

 

Warranty information: Five-year parts-only electric heater and compressor and one-year all other parts warranties are available. Extended warranty packages are also available.

 

Special installation requirements: None. The electronic expansion valve (EXV) is factory installed and tested.

 

Contact: Carrier Corp., 800-227-7437; www.carrier.com/commercial.

 

eProduct 168

 

Century

 

Model: HBH Large Capacity Series water-source heat pump

 

Footprint (in inches): 85 (length) by 36 (width) by 22 (height)

 

Serviceability features: The performance Sentinel System signals when the unit is operating inefficiently so service can be scheduled before a lockout occurs. Multiple access panels allow easy access to the compressor compartment. Removable blower inlet rings allow access to the fan and motor.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time, weekdays, at 517-787-2100. Sales representatives throughout the U.S. and Canada can also provide assistance. Sales rep contact information can be found on the website under the Where to Buy link.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; engineering design guide; and submittal forms are available.

 

Noise-reduction features: With a double-isolation mounting system, compressors are mounted on specially engineered, sound-tested ethylene propylene diene terpolymer (EPDM) grommets to a heavy-gauge mounting plate, which is further isolated from the cabinet base with rubber grommets to maximize sound attenuation. An optional quiet, sound-absorbing package is available. Interior surfaces of the compressor section are lined with glass fiber insulation, and the air-handling section is lined with foil-faced insulation.

 

IAQ equipment supported: The unit is shipped with factory-installed filter rails and filters, and optional 2-inch filter rails are available. An insulated panel separates the fan and compressor compartments, so the compressor is not in the airstream.

 

Thermostat compatibility: The system works with heat pump or heat/cool thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The heat pump can be ordered with left or right return air and straight or back supply air discharge. Discharge is field-convertible using existing parts including panels and belts. The electric box can be field-converted from the right side to the left. Hanger brackets come standard. The unit is built with dual refrigerant circuits and a stainless steel drain pan. Designed for water-loop (boiler/tower) applications, units are extended-range-capable (with optional insulation package) for geothermal applications.

 

Warranty information: A limited express warranty covers the compressor for five years and other parts for one year from date of purchase by the original owner with product registration within 90 days of purchase. Some limitations apply; see the printed warranty online for more information.

 

Special installation requirements: Water-source heat pumps are generally selected on cooling capacity only, as heating output is generally greater than cooling capacity. Selection should be based on total and sensible cooling conditions, and the model selected should be closest to the actual cooling load.

 

Contact: Century/MARS, 517-787-2100;
www.century-hvac.com.

 

eProduct 169

 

Cleaver-Brooks

 

Model: ClearFire®-LC boiler

 

Footprint (in inches): 124 (length) by 69 (width) by 126 (height)

 

Serviceability features: This boiler is ideal for primary, variable-flow pumping systems. The self-regulating, linkage-less variable-speed drive (VSD) modulating premix burner delivers low emissions and high turndown without actuators, dampers, or butterfly valves. The unit includes a built-in multiple boiler lead-lag control and offers no minimum return temperature. Other features include a thermal shock-resistant design, low pressure drop, and a hinged swingout burner for serviceability. The unit is also low-flow tolerant and boasts replaceable tubes.

 

Technical support: Support is available at 800-250-5883 or www.cleaverbrooks.com/reps. Factory-trained representatives can be contacted for consultation, sales, maintenance, and aftermarket support.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: A variable-speed combustion air blower provides quiet part-load operation.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The boiler communicates with building automation systems via various protocols.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The system uses patented AluFer® heat-transfer technology and a high-turndown burner with advanced controls to deliver up to 98 percent efficiency and low emissions in a compact footprint. It provides a condensing boiler option for larger applications and serves as a cost-effective alternative to installing multiple smaller boilers or less-efficient noncondensing boilers of a similar capacity.

 

Warranty information: Standard 12/18-month parts, 20-year thermal shock, 10-year corrosion on heat exchanger, and five-year premix burner warranties are available.

 

Special installation requirements: The system is compatible with any hydronic piping arrangement and features dual water return capability. Other features include a high operating temperature (250°F max limit) capability, and a condensate neutralization treatment system is recommended. Category IV flue venting (condensing, positive pressure) is required.

 

Contact: Cleaver-Brooks Inc., 800-250-5883;
www.cleaverbrooks.com.

 

eProduct 170

 

Model: ProFire®-Q Series burner

 

Footprint (in inches): 23 (length) by 18 (width) by 15 (height)

 

Serviceability features: Linkage-less fuel and air control with variable speed come standard. An integral and self-contained package with a hinged, swing-open control panel cover provides easy access to burner controls and panel components, the fan, DC brushless motor, and variable-speed drive (VSD). Burner removal is not necessary for any maintenance.

 

Technical support: Support is available at 800-250-5883 or www.cleaverbrooks.com/reps. Factory-trained representatives can be contacted for consultation, sales, maintenance, and aftermarket support.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: The fan and motor are contained in a panel enclosure, helping to reduce operational noise.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The unit needs temperature or pressure control.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The system is designed for efficiency and operational simplicity. The burner can be setup for on/off, low-high-low, or full modulation with a parallel positioning gas-flow ratio control. The unit is ideal for cast-iron sectional boilers, firebox boilers, small commercial flex tube boilers, condensing water heaters, and furnace and oven applications in the process heating industry.

 

Warranty information: An 18-month entire unit warranty from the date of shipment or 12-month warranty from the commissioning date are available.

 

Special installation requirements: The linkage-less system utilizes a DC pulse-width-modulation blower and gas actuator control to simplify burner set up and operation. As with all combustion equipment, a combustion analyzer recording stack oxygen and carbon monoxide is required for commissioning.

 

Contact: Cleaver-Brooks Inc., 800-250-5883; www.cleaverbrooks.com.

 

eProduct 171

 

ClimateMaster

 

Model: Tranquility® Vertical Stack (TSL) Series water-source heat pump

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: Removable chassis allows for staged installation and ease of maintenance/service once installation is complete. The heat pump is available with iGate™ (DXM2) controls, allowing for the unit’s configuration, diagnostics, and monitoring in plain English on an ATC thermostat or ACD diagnostic tool.

 

Technical support: Support is available at 405-745-6000.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Dual-level compressor isolation lowers vibration and reduces noise for quiet operation.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: Manufacturer did not specify.

 

Additional features: This vertical stack, ducted heat pump provides a simple, cost-effective approach to installing ducted stacked units. TSL Series provides independent metering capabilities for a wide scope of building applications, including office, education, hospitality, and multi-family projects. Designed with a 4-wire ATC thermostat connection and standard CXM controller, the unit features loss-of-charge and high-pressure switches, a lockout safety circuit reset function at the thermostat or disconnect, a five-minute anti-short cycle, random start, high/low voltage and condensate overflow protection, an LED fault indicator, 24-vac or dry-contact alarm options, and a low-temperature cutout on the water coil.

 

Warranty information: A five-year standard warranty with the option to extend to 10 years is available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: ClimateMaster Inc., 405-745-6000; www.climate
master.com.

 

eProduct 172

 

Comfort-Aire

 

Model: HBH Compact Series packaged water-source heat pump

 

Footprint (in inches): 34-54 (length) by 19-24 (width) by 11-21 (height)

 

Serviceability features: The performance Sentinel System monitors operation and signals a potential problem so service can be scheduled before lockout occurs. Large removable panels provide easy access from multiple sides to simplify service. Inlet rings on the blower allow a user to remove the wheel and motor from one side without removing the housing.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time at 517-787-2100. Sales representatives throughout the U.S. and Canada can also provide assistance. Sales rep contact information can be found on the website under the Where to Buy link.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and an engineering design guide are available.

 

Noise-reduction features: A dual spring- and grommet-isolation compressor mounting system and flexible torsion motor mount reduce vibration and related sound. Compressor and air-handler compartments are separated by an insulated divider. Blower housing is covered in noise-suppression material. Models are available with quiet insulation packages as special order options.

 

IAQ equipment supported: The unit is shipped with a 1-inch factory-installed filter. Optional 2-inch filter brackets are available to upgrade to a 2-inch filter, if desired.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The heat pump utilizes some shared parts and some unique parts.

 

Additional features: A small cabinet makes this line ideal for replacements, and units are designed to be compatible with many older water-source heat pumps. The unit comes complete with factory-installed hanger brackets and field-convertible air discharge. Units can be ordered in a variety of voltages and configurations.

 

Warranty information: Limited one-year express parts and five-year compressor warranties are available. The warranty applies only when the heat pump has been installed as part of a complete Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-matched system for the original consumer in the original installation. The unit should be registered, and the startup certification form must be completed and submitted to Comfort-Aire.

 

Special installation requirements: The unit should be selected based on total and sensible cooling conditions and should be closest to, but no larger than, the actual cooling load (heating output is usually greater than the cooling capacity). The unit should be located in an area that allows enough space for maintenance or repairs without removing the unit from the ceiling and situated to allow easy removal of the filter.

 

Contact: Comfort-Aire/MARS, 517-787-2100;
www.comfort-aire.com.

 

eProduct 173

 

Comfortmaker

 

Model: PHR5 packaged heat pump

 

Footprint (in inches): 33-44 (length) by 48-49 (width) by 44-55 (height)

 

Serviceability features: The heat pump installs easily on a rooftop or at the ground level. Three panels allow easy access for maintenance and installation, and it easily converts to down-discharge applications.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gocomfortmaker.com.

 

Noise-reduction features: The heat pump includes a two-stage Copeland Scroll™ compressor, which operates most of the time in the quiet low stage. The outdoor fan is sized and optimized for minimal noise.

 

IAQ equipment supported: Enhanced dehumidification is available on high-stage cooling with the use of a dehumidistat. The accessory filter racks support 2-inch filters.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Two-stage Copeland Scroll compressors provide two-stage heating and cooling operation. Units include field-convertible airflow for either ground-level (horizontal) or rooftop (down) airflow and high-efficiency electronically commutated motor (ECM) indoor blower motors. With cooling efficiencies up to 15.5 SEER and 12.5 EER, these heat pumps are Energy Star-qualified.

 

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gocomfortmaker.com.

 

eProduct 174

 

Model: RGH181-303 packaged gas/electric unit

 

Footprint (in inches): 128-158 (length) by 86 (width) by 49-57 (height)

 

Serviceability features: An IGC solid-state control features on-board diagnostics with an LED error code designation, burner control logic, and an energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. The unit features through-the-base utility connections. Access panels have easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gocomfortmaker.com.

 

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Energy Star-qualified units feature dedicated vertical or horizontal airflow duct-configuration models, high- and low-pressure switches, and scroll compressors. Units feature two-stage cooling with independent circuits and control. Factory-installed options include medium- and high-static indoor fan and economizer options.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gocomfortmaker.com.

 

eProduct 175

 

Daikin Applied

 

Model: Rebel™ model DPS packaged unit

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: The slide-out energy recovery wheel (ERW) and MicroTech® III controller with Open Choices™ operate with BACnet® or LonMark® communications for easy integration with building automation systems (BAS). A user-friendly control keypad and display; Intelligent Equipment™ mobile access; 2- to 4-inch slide-out filter racks; low-maintenance direct-drive variable frequency drive (VFD) fan motors; a variable-speed inverter scroll compressor; hinged access doors; and cleanable 2-inch double-wall R-13 foam-injected panels are offered.

 

Technical support: Local service support is available in most major cities.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Quiet composite condenser fans, enclosed compressor operation, variable-speed motors, and 2-inch double-wall R-13 foam-injected panels help reduce operational volume.

 

IAQ equipment supported: The Rebel features an energy recovery wheel, a stainless steel double-sloped drain pan, an outdoor air monitor, a 100 percent dedicated outdoor air option, modulating hot-gas reheat dehumidification control, MERV-13 filters.

 

Thermostat compatibility: A two-wire space sensor is required, and a 2-wire remote user interface is optional.

 

Replacement parts compatibility: The unit does not share replacement parts with other models.

 

Additional features: Features include a variable-speed inverter scroll compressor and a factory-installed ERW. The system exceeds the U.S. Department of Energy (DOE) rooftop challenge; features 18.3 IEER; offers variable-speed control for all its fan motors; presents a 100 percent dedicated outdoor air option; offers a modulating hot-gas reheat; and boasts 2-inch double-wall R-13 foam-injected panels. The modulating gas furnace also includes an outdoor air monitor.

 

Warranty information: Normal Daikin warranties apply.

 

Special installation requirements: All components are factory installed except the space sensor and optional static-pressure-sensing tubes.

 

Contact: Daikin Applied, 800-432-1342;
www.daikinapplied.com.

 

eProduct 176

 

Daikin – Unitary

 

Model: DCG-300 gas/electric rooftop

 

Footprint (in inches): 133 (length) by 88 (width) by 53 (height)

 

Serviceability features: Features include high- and low-pressure switches; a high-capacity, steel-cased filter drier; a 24-V terminal strip; a contactor with lugs; a built-in filter rack with 2-inch filters that are convertible to 4-inch filters; and a sloped drain pan.

 

Technical support: Support is available 7 a.m. to 7 p.m. Central time, weekdays, through a local distributor or by calling 888-593-9988 option 5.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: High-efficiency scroll compressors help reduce operational volume.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: A patented tubular heat exchanger with two-stage heating and high-efficiency scroll compressor with aluminum microchannel indoor coil and two-stage cooling are included.

 

Warranty information: Standard five-year limited parts and 20-year limited heat exchanger warranties are available. Complete warranty details are available online. Support is available from a local distributor or manufacturer’s representative.

 

Special installation requirements: Units are shipped with downflow orientation but are convertible to horizontal orientation. Units come with a full-perimeter base rail and a sloped drain pan for easy installation.

 

Contact: Daikin North America LLC, 713-861-2500;
www.daikincomfort.com.

 

eProduct 177

 

Model: DTH/DTG high-efficiency rooftop units

 

Footprint (in inches): 74 (length) by 48 (width) by 39-43 (height)

 

Serviceability features: High- and low-pressure switches, a contactor with lugs, a high-capacity steel-cased filter drier, heater kits with single-point entry, a 24-V terminal strip, a built-in filter rack with 2-inch filters, and a bottom utility entry are offered.

 

Technical support: Support is available 7 a.m. to 7 p.m. Central time, weekdays, through a local distributor or by calling 888-593-9988 option 5.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: High-efficiency scroll compressors help reduce operational volume.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: This single-phase, 15-SEER rooftop product offers higher efficiencies compared to Daikin’s single-phase DCH/DCG product line at 13 SEER.

 

Warranty information: Standard five-year limited parts and 20-year limited heat exchanger warranties are available. Complete warranty details are available online. Support is available from a local distributor or manufacturer’s representative.

 

Special installation requirements: Units are shipped with downflow orientation but are convertible to horizontal orientation. The system also comes with a full-perimeter base rail and a sloped drain pan for easy installation.

 

Contact: Daikin North America LLC, 713-861-2500;
www.daikincomfort.com.

 

eProduct 178

 

Daikin – VRV

 

Model: FXFQ-TVJU VRV indoor round flow sensing cassette unit

 

Footprint (in inches): 33 (length) by 33 (width) by 10-12 (height)

 

Serviceability features: The cassette unit is designed for quick, easy access from below the unit to the electrical panel, fan assembly, and filter. An optional robotic self-cleaning filter removes dust from the filter up to once each day to ensure optimal airflow, capacity, and efficiency. Cleaning the dust collector box of the robotic cleaner is quick and easy using a standard vacuum hose.

 

Technical support: Support is available 7 a.m. to 7 p.m. Central time, weekdays, through a local distributor or by calling 888-593-9988 option 5. Daikin eQuip is a free mobile app for on-the-go cellphone and tablet access to product technical information and downloads of technical documents. The Dr. Daikin website (www.drdaikin.com) provides quick access to product error codes, and Daikin University (www.daikinuniversity.com) offers online and classroom training.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: An auto fan mode is available to reduce fan speed and sound levels as the room temperature gets closer to the set point.

 

IAQ equipment supported: An optional robotic self-cleaning filter removes dust from the filter up to once each day to ensure optimal airflow, capacity, and efficiency. Cleaning the dust collector box of the robotic cleaner is quick and easy using a standard vacuum hose.

 

Thermostat compatibility: The cassette unit requires a special thermostat.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The system provides comfort, energy efficiency, and flexibility due to 360-degree airflow, 23 possible configurable airflow patterns, and triple room sensors (air temperature, surface temperature, and occupancy). Individually controllable supply air louvers are included. An optional robotic self-cleaning filter removes dust from the filter up to once each day.

 

Warranty information: A standard 10-year limited parts warranty is available. Complete warranty details are available online. Support is available from local Daikin manufacturer’s representative or distributor.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Daikin North America LLC, 713-861-2500;
www.daikincomfort.com and www.daikinac.com.

 

eProduct 179

 

Model: REYQ-T VRV IV heat recovery VRV/VRF system

 

Footprint (in inches): 37-49 (length) by 30 (width) by 67 (height)

 

Serviceability features: The unit offers reduced commissioning time through its VRV configurator software and graphical user interface (GUI). Design flexibility is provided through long piping lengths of up to 3,280 feet and up to 100 feet vertical separation between indoor units. The system automatically controls the necessary amount of refrigerant needed; checks wiring, shut off valves, and sensors; and provides diagnostic error codes.

 

Technical support: Support is available 7 a.m. to 7 p.m. Central time, weekdays, through a local distributor or by calling 888-593-9988 option 5. Daikin eQuip is a free mobile app for on-the-go cellphone and tablet access to product technical information and downloads of technical documents. The Dr. Daikin website (www.drdaikin.com) provides quick access to product error codes, and Daikin University (www.daikinuniversity.com) offers online and classroom training.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Standard operating sound levels are minimized with Daikin’s inverter variable-speed compressor. Sound levels are further reduced by enabling a unique sound-reduction feature that will automatically either lower the sound level at nighttime or provide three stages of sound reduction via an external input.

 

IAQ equipment supported: Integrated ventilation solutions with outside-air-processing units and energy recovery ventilators (ERVs) provide exceptional IAQ.

 

Thermostat compatibility: The unit requires a special thermostat.

 

Replacement parts compatibility: The system utilizes some shared parts and some unique parts.

 

Additional features: This VRV/variable refrigerant flow (VRF) system is assembled in North America and features improved seasonal efficiency with automatic and customizable variable refrigerant temperature (VRT) climate tuning. Heating operation is available down to minus 13°F. The system allows for the connection of up to 64 indoor units with 11 styles of ducted and ductless indoor units. Standard gold coil coating provides salt-spray test to ASTM B117.

 

Warranty information: Standard 10-year compressor and limited parts warranties are available. Complete warranty details are available online. Support is available from a local Daikin manufacturer’s representative or distributor.

 

Special installation requirements: Refrigerant balancing (REFNET) joints are used to distribute the correct flow of refrigerant in every branch of the piping network to increase the reliability and performance of the system.

 

Contact: Daikin North America LLC, 713-861-2500;
www.daikincomfort.com and www.daikinac.com.

 

eProduct 180

 

Day & Night

 

Model: RGH090-150 packaged gas/electric unit

 

Footprint (in inches): 88-116 (length) by 60-63 (width) by 49-57 (height)

 

Serviceability features: The IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. Units also feature through-the-base utility connections capabilities. Access panels have easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.godayandnight.com.

 

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2  sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: These Energy Star-qualified units feature field-convertible airflow and high- and low-pressure switches. Dual scroll compressors feature internal line-break overload protection. High-, medium-, and low-heat options and medium- and high-static indoor fan options are included. Other market-driven options, such as liquid propane/high-altitude kits, are also available.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.godayandnight.com.

 

eProduct 181

 

Model: RGS210-336 packaged gas/electric unit

 

Footprint (in inches): 128-158 (length) by 87 (width) by 49-57 (height)

 

Serviceability features: These units have provisions for through-the-bottom power-entry capability. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. Access panels have easy-grip handles and a no-strip screw feature. The exclusive IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and an energy-saving indoor fan motor delay.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.godayand
night.com.

 

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide outdoor air for demand controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Dedicated vertical or horizontal airflow duct configuration models are available. This ASHRAE 90.1-compliant unit features high- and low-pressure switches and a scroll compressor with internal line-break overload protection. Factory-installed options include high-, medium-, and low-heat options; stainless steel heat exchangers; and a high-static indoor fan option. Other options include liquid propane/high-altitude kits.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.godayandnight.com.

 

eProduct 182

 

Fujitsu

 

Model: Heat Recovery 460V VRF system

 

Footprint (in inches): 30 (length) by 37 (width) by 67 (height)

 

Serviceability features: Inspection/replacement of main parts is easy due to the system’s innovative construction and LED display. Consolidated electrical components make maintenance easy. A movable printed circuit board (PCB) panel allows for easier maintenance. An easy-to-read, seven-segment LED display explains operational /trouble status. A split front panel allows maintenance to occur from the top or bottom of the unit.

 

Technical support: Support is available 8 a.m. to 8 p.m. Eastern time at 888-888-3424. Through a password-protected website, contractors can download a design and technical manual, installation manual, service manual, operation manual, and submittal drawings.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: In low-noise mode, the operation of the outdoor condensing unit is limited to keep noise levels below a programmed limit. Using this feature, the maximum sound from a condensing unit can be as low as 50 dB.

 

IAQ equipment supported: Indoor wall-mounted units feature ion deodorization filters, which decompose absorbed odors using the oxidizing/reducing effects of ions generated by the ultra-fine-particle ceramic and Apple-Catechin filter, which absorbs fine dust, invisible mold spores, and harmful microorganisms onto the filter by static electricity, and further growth is inhibited and deactivated.

 

Thermostat compatibility: The VRF system requires a special thermostat.

 

Replacement parts compatibility: The system utilizes some shared parts and some unique parts.

 

Additional features: The product line provides unique energy savings and serviceability features. For example, when connected to an economizer, no indoor unit refrigerant operation will take place for true energy savings. In addition, the VRF system may be commissioned and diagnosed through its graphical service tool.

 

Warranty information: Ten-year parts and compressor warranties are available for systems that are installed and commissioned by a qualified contractor; see the warranty statement for full details.

 

Special installation requirements: Installing contractors are required to take a hands-on service course.

 

Contact: Fujitsu General America Inc., 973-575-0380;
www.airstagevrf.com.

 

eProduct 183

 

GeoComfort

 

Model: GVS/GVT Element Series compact vertical packaged geothermal heat pump

 

Footprint (in inches): 23 (length) by 23 (width) by 37 (height)

 

Serviceability features: Common service components, including a desuperheater, a reversing valve, a blower motor, refrigerant ports, a thermostatic expansion valve (TXV), and a filter drier, are accessible from the front panel. A hinged control box tilts up and out of the way for access to controls, wiring, and internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and YouTube video instructions are available.

 

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provide exceptional compressor and blower motor isolation. High-density, Greenguard-certified closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or pre-painted sheet metal cabinet is engineered and built to meet industry sound and leakage guidelines.

 

IAQ equipment supported: An optional field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The heat pump utilizes some shared parts and some unique parts.

 

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating failures caused by formicary corrosion. The control box is easily accessible. A foam-insulated, flat-wound, enhanced-surface coaxial heat exchanger improves heat transfer and efficiency. A standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated motor (ECM) blower (two-stage) offer higher efficiency. ECM motors are optional on single-stage equipment.

 

Warranty information: A one-year limited parts-only warranty is available. Extended warranties are also available.

 

Special installation requirements: The geothermal heat pump’s small footprint, front-mounted plumbing, and side-entry electrical connections are ideal for retrofit or new build applications. The purpose-build model uses many of the design innovations found throughout the product line and incorporates them into a compact, efficient, and technician-friendly package.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 184

 

Model: GYT Navigator Series vertical packaged geothermal heat pump

 

Footprint (in inches): 31 (length) by 25 (width) by 58 (height)

 

Serviceability features: Top-mount, eye-level, digital controls or a side-mount version are optional. The thermostatic expansion valve (TXV) and filter drier are easily accessible through the blower section. A front panel window allows a user to view status lights without opening the cover. All cabinet panels are removable for ease of service and access to all components and test point locations.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and YouTube video instructions are available.

 

Noise-reduction features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage Scroll compressor from the unit. Internal copper tubing employs an enhanced shock-loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

 

IAQ equipment supported: An optional field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The multi-positional cabinet is left- or right-hand return field-convertible. Other features include an eye-level, top-mounted control box; optional side or back discharge; and an all-aluminum microchannel air coil that helps to eliminate failures caused by formicary corrosion. A foam-insulated, enhanced-surface coaxial heat exchanger protects against corrosion and improves performance. A variable-speed electronically commutated motor (ECM) blower delivers optimum airflow, and the SoftStart option comes factory-installed.

 

Warranty information: A one-year limited parts-only warranty is available. Optional extended warranties are also available.

 

Special installation requirements: Standard ground-source heat pump installation practices apply to all Enertech Global LLC products.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 185

 

Heil

 

Model: PGR5 packaged gas/electric unit

 

Footprint (in inches): 31-43 (length) by 47 (width) by 44-53 (height)

 

Serviceability features: The unit installs easily on a rooftop or at the ground level. Three panels allow easy access for maintenance and installation. The unit may easily be converted to down-discharge applications.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goheil.com.

 

Noise-reduction features: The system includes a two-stage Copeland Scroll compressor, which operates most of the time in the quiet low stage. The unit also includes a two-stage heating system that offers similar comfort benefits in heating mode. The outdoor fan is sized and optimized for minimal noise.

 

IAQ equipment supported: A dehumidification mode (airflow reduction) comes standard on all models. The system’s accessory filter racks support 2-inch filters.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Units feature two-stage heating and cooling operation, stainless steel tubular heat exchangers, field-convertible airflow, and high-efficiency electronically commutated (EC) indoor blower motors. With cooling efficiencies up to 16 SEER and 12.5 EER, the PGR5 packaged units are Energy Star-qualified.

 

Warranty information: Ten-year limited heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goheil.com.

 

eProduct 186

 

Model: RGH181-303 packaged gas/electric unit

 

Footprint (in inches): 128-158 (length) by 86 (width) by 49-57 (height)

 

Serviceability features: The IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. The units feature through-the-base utility connections capability, and access panels have easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goheil.com.

 

Noise-reduction features: Belt-driven evaporator fans provide quiet and efficient operation.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Energy Star-qualified units feature dedicated vertical or horizontal airflow duct-configuration models, high- and low-pressure switches, and scroll compressors. The units feature two-stage cooling with independent circuits and control. Medium- and high-static indoor fans and economizers are factory-installed options.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goheil.com.

 

eProduct 187

 

Hydron Module

 

Model: HVS/HVT Origin Series compact vertical packaged geothermal heat pump

 

Footprint (in inches): 23 (length) by 23 (width) by 37 (height)

 

Serviceability features: Common service components, including a desuperheater, a reversing valve, a blower motor, refrigerant ports, a thermostatic expansion valve (TXV), and a filter drier, are accessible through the front panel. A hinged control box tilts up and out of the way for access to controls, wiring, and internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and YouTube video instructions are available.

 

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provide exceptional compressor and blower motor isolation. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or pre-painted sheet metal cabinet is engineered and built to meet industry noise and leakage guidelines.

 

IAQ equipment supported: An optional field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating failures caused by formicary corrosion. The control box is easily accessible. A foam-insulated, flat-wound, enhanced-surface coaxial heat exchanger improves heat transfer and efficiency. A standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated (EC) blower (two-stage) offer higher efficiency. Electronically commutated motors (ECMs) are optional on single-stage equipment.

 

Warranty information: Standard residential 10-year all unit components and 10-year select accessory items warranties are available. Five-year labor allowance warranties are also available on all of the above including select accessories. A free labor-allowance warranty is upgradable to 10 years upon registration. Optional limited lifetime microchannel air coil and compressor warranties are also available.

 

Special installation requirements: Its small footprint, front-mounted plumbing, and side-entry electrical connections are ideal for retrofit or new build applications. The purpose-build model uses many of the design innovations found throughout the product line and incorporates them into a compact, efficient, and technician-friendly package.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 188

 

Model: HYT Evolution Series vertical packaged geothermal heat pump

 

Footprint (in inches): 31 (length) by 25 (width) by 58 (height)

 

Serviceability features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage Scroll compressor from the unit. Internal copper tubing employs an enhanced shock-loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage Scroll compressor from the unit. Internal copper tubing employs an enhanced shock-loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

 

IAQ equipment supported: An optional field-installed accessory filter rack accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The multi-positional cabinet is left- or right-hand return field-convertible. Features include an eye-level, top-mounted control box and optional side or back discharge. An all-aluminum microchannel air coil eliminates failures caused by formicary corrosion. A foam-insulated, enhanced-surface coaxial heat exchanger protects against corrosion and improves performance. A variable-speed electronically commutated (EC) blower delivers optimum airflow, and the SoftStart option comes factory-installed.

 

Warranty information: A one-year limited parts-only warranty is available. Optional extended warranties are also available.

 

Special installation requirements: Standard ground-source heat pump installation practices apply to all Enertech Global LLC products.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 189

 

ICP Commercial

 

Model: RGH060 packaged gas/electric unit

 

Footprint (in inches): 74 (length) by 47 (width) by 41 (height)

 

Serviceability features: The IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and an energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. Units feature through-the-base utility connections capability, and access panels feature easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goicp
commercial.com.

 

Noise-reduction features: Belt-driven evaporator fans provide quiet and efficient operation.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV)  capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Energy Star-qualified units feature field-convertible airflow, high- and low-pressure switches, single-stage cooling, and two-stage gas heat. Factory-installed options include high-, medium-, and low-heat options and medium- and high-static indoor fan options. Other market-driven options, such as liquid propane/high-altitude kits, are available.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goicpcommercial.com.

 

eProduct 190

 

Model: RGH181-303 packaged gas/electric unit

 

Footprint (in inches): 128-158 (length) by 86 (width) by 49-57 (height)

 

Serviceability features: The IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. Units feature through-the-base utility connections capability, and access panels feature easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.goicpcommercial.com.

 

Noise-reduction features: Belt-driven evaporator fans provide quiet and efficient operation.

 

IAQ equipment supported: The unit supports The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Energy Star-qualified units feature dedicated vertical or horizontal airflow duct-configuration models, high- and low-pressure switches, and scroll compressors. Units also feature two-stage cooling with independent circuits and control. Factory-installed options include medium- and high-static indoor fan and economizer options.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.goicpcommercial.com.

 

eProduct 191

 

KeepRite

 

Model: PGR5 packaged gas/electric unit

 

Footprint (in inches): 31-43 (length) by 47 (width) by 44-53 (height)

 

Serviceability features: The unit installs easily on a rooftop or at the ground level. Three panels allow easy access for maintenance and installation, and the unit may be easily converted for down-discharge applications.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gokeeprite.com.

 

Noise-reduction features: The unit includes a two-stage Copeland Scroll compressor, which operates most of the time in the quiet low stage. The unit also includes a two-stage heating system that offers similar comfort benefits in the heating mode. The outdoor fan is sized and optimized for minimal noise.

 

IAQ equipment supported: A dehumidification mode (airflow reduction) comes standard on all models. The unit’s accessory filter racks support 2-inch filters.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Units feature two-stage heating and cooling operation, stainless steel tubular heat exchangers, field-convertible airflow, and high-efficiency electronically commutated (EC) indoor blower motors. With cooling efficiencies up to 16 SEER and 12.5 EER, the PGR5 packaged units are Energy Star-qualified.

 

Warranty information: Ten-year limited heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gokeeprite.com.

 

eProduct 192

 

Model: RGH060 packaged gas/electric unit

 

Footprint (in inches): 74 (length) by 47 (width) by 41 (height)

 

Serviceability features: The IGC solid-state control provides on-board diagnostics with an LED error code designation, burner control logic, and an energy-saving indoor fan motor delay. All connections and troubleshooting points are conveniently located on the easily accessible master terminal board. The units feature through-the-base utility connections capability, and access panels feature easy-grip handles and a no-strip screw feature.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gokeeprite.com.

 

Noise-reduction features: Belt-driven evaporator fans provide quiet and efficient operation.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability, and a duct-mounted CO2 sensor accessory is available for field installation to provide demand-controlled ventilation (DCV) capability.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Energy Star-qualified units feature field-convertible airflow, high- and low-pressure switches, single-stage cooling, and two-stage gas heat. Factory-installed options include high-, medium-, and low-heat options and medium- and high-static indoor fan options. Other market-driven options, such as liquid propane/high-altitude kits, are available.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gokeeprite.com.

 

eProduct 193

 

Laars

 

Model: MagnaTherm boiler

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: Access to most components, including the controls, gas valves, blowers, burner, etc., is available via the front or side. All piping and venting comes from the back of the boiler to help make installations neat and piping easily accessible.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time at 800-900-9276.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: The unit offers quiet operation and includes a low-noise blower.

 

IAQ equipment supported: The product vents to the outside, which does not impact IAQ. The boiler includes low 10-ppm NOx emissions for low impact on outdoor air quality

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The boiler utilizes some shared parts and some unique parts.

 

Additional features: The unit features Vari-Prime control, which modulates boiler pump speed with boiler modulation rate and balances combustion air and water flow. Its small footprint, slim vertical design, and removable top section help it fit into tight mechanical rooms. Optional electrical packages allow for easy pairing with various field-supply voltages.

 

Warranty information: Ten-year limited boilers and five-year limited water heater warranties are available.

 

Special installation requirements: A color LCD touchscreen interface features simple codes. The unit boasts advanced, quick setup functionality; an outdoor reset with customizable reset curves; domestic hot water (DHW) override; and a warm weather shutdown. Controls can stage up to eight boilers. Optional voltage packs from 120- to 600-V are available.

 

Contact: Laars Heating Systems Co., 603-335-9300;
www.laars.com.

 

eProduct 194

 

LG Electronics

 

Model: Multi F MAX outdoor unit (LMU480HV)

 

Footprint (in inches): 13 (length) by 3713/32 (width) by 5411/32 (height)

 

Serviceability features: The Smart Inverter Monitoring System (SIMs) 2.0 provides contractors with a convenient troubleshooting solution. The monitoring device connects to the outdoor unit, sending system data directly to the SIMs smartphone app. The app displays real-time data, offers error codes with a troubleshooting guide, and stores information for later access.

 

Technical support: Support is available 8 a.m. to 6 p.m. Central time, Monday to Friday, at 888-865-3026.

 

Technical support materials: Installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: A variable-speed compressor provides quiet, efficient operation. Additionally, the compressor is mounted on vibration-attenuating rubber grommets to avoid transmission of vibrations and ensure quiet operation.

 

IAQ equipment supported: Outdoor units can support two to eight indoor units, and most indoor units feature a primary, removable, washable filter and a secondary 3M air filter. During cooling and dehumidifying operations, the auto-clean operation mode removes the moisture generated inside the indoor unit to increase air quality.

 

Thermostat compatibility: Manufacturer did not specify.

 

Replacement parts compatibility: The unit does not share replacement parts with other models.

 

Additional features: Outdoor units feature low ambient heating operation down to minus 4°F, ensuring continuous operation and efficient performance during the winter months. The unit’s jet-cool/heat mode quickly cools or warms the indoor air, as needed.

 

Warranty information: Standard five-year parts and seven-year compressor warranties are available. Extended five-year parts and three-year compressor warranties enable LG Excellence contractors to offer consumers a 10/10 limited warranty on this model and other qualifying LG duct-free systems in 2015.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: LG Electronics.

 

eProduct 195

 

Lochinvar

 

Model: FTXL™ fire tube boiler (FTX)

 

Footprint (in inches): 33 (length) by 26 (width) by 54 (height)

 

Serviceability features: The boiler is equipped with all-in-one SMART SYSTEM™ control technology. With a redesigned multi-color LCD interface and a wealth of new control features, the state-of-the-art operating system offers the option of direct integration into a building automation system (BAS) through communication protocols such as Modbus or BACnet. The boiler is designed for maximum space efficiency and flexible placement in the mechanical room. Each model features zero clearance on both sides and the same installed footprint of 6.2 square feet. The boiler allows for direct venting up to 100 feet using polyvinyl chloride (PVC), as well as chlorinated polyvinyl chloride (CPVC), polypropylene, or stainless steel pipe.

 

Technical support: Support is available 8 a.m. to 5 p.m. Central time at 800-722-2101.

 

Technical support materials: Installation, operation, and maintenance manuals; a parts list; specification sheets; Revit product drawings; and plan view drawings are available.

 

Noise-reduction features: No special sound reduction measures are required. The boiler is library-quiet.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The SMART SYSTEM control is a dedicated circuit board that, among many other functions, acts as the thermostat.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The boiler delivers up to 10:1 turndown and up to 98 percent thermal efficiency. Enabled for CON-X-US™ remote connect capability, the boiler offers complete control from anywhere. The new Loch-N-Load™ programming feature on the SMART SYSTEM control allows a user to load parameters onto a USB drive and upload them to the operating system. This shortcut can reduce installation and programming time by up to 30 minutes per boiler. With SMART SYSTEM’s built-in cascading sequencer, up to eight FTXL units can operate efficiently with total inputs of up to 6.8 MMBtuh.

 

Warranty information: A 10-year limited warranty that covers the heat exchanger for leakage and thermal shock or other malfunction caused by defects in materials and/or workmanship is available. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains installed at its original place of installation.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Lochinvar LLC, 615-889-8900; www.lochinvar.com.

 

eProduct 196

 

Magic-Pak

 

Model: V-Series HWC/EWC single packaged vertical unit

 

Footprint (in inches): 30 (length) by 28 (width) by 43 (height)

 

Serviceability features: New V-Series equipment features a redesigned heating section with a larger access panel, forward-facing component attachments, and a full slide-out cooling chassis.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time. For general inquiries, call 800-448-5872; for application support, call 866-282-7257.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; startup instructions; product brochures; and guide specs are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: The unit comes standard with MERV-5 filters and offers a field upgrade to MERV-8.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The packaged vertical unit utilizes some shared parts and some unique parts.

 

Additional features: The units are designed to make specification easier for engineers. Ideal for multifamily housing and mixed-use construction, the new V-Series units offer higher-efficiency options in the same cabinet size as the original Magic-Pak units from 50 years ago, helping to save time and money on replacement jobs. Delivering thermal efficiencies up to 95 percent and cooling up to 11 EER, V-Series equipment is available in gas/electric and electric/electric configurations. To learn more, visit www.magic-pak.com/vseries.

 

Warranty information: Five-year limited all parts, 10-year aluminized heat exchanger (HWC), and 20-year stainless steel heat exchanger (HWC) warranties are available.

 

Special installation requirements: New 95 percent equipment requires special consideration related to furnace condensate management in replacement applications. The V-Series is equipped with the option to run the condensate line out of either the side or front of the equipment to support zero-clearance applications on old 80 percent models.

 

Contact: Magic-Pak, 800-448-5872; www.magic-pak.com.

 

eProduct 197

 

Mitsubishi Electric

 

Model: L-Generation air-source VRF outdoor units

 

Footprint (in inches): 36-69 (length) by 29 (width) by 65 (height)

 

Serviceability features: Built-in self-diagnostics direct a technician to a specific issue. Convenient front, side, and top panels allow for easy access to serviceable components. No or minimal ductwork and simple wiring result in minimal maintenance.

 

Technical support: Support is available from 8 a.m. to 7 p.m. Eastern time, Monday to Friday, at 800-433-4822.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Units operate at 58-65 dBA. The inverter-driven compressor and variable fan unit run at partial speed for lower sound levels.

 

IAQ equipment supported: Indoor units feature a washable filtration system that absorbs odor-causing gases; traps dust, pollens, and other particles; and reduces allergens, viruses, and bacteria in the air for optimal IAQ.

 

Thermostat compatibility: The VRF outdoor units require a special thermostat.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The units feature HexiCoil™ technology, a zinc-aluminum flat-tube heat exchanger that maximizes heat transfer capability through its unique fin shape. Its turbulated tube walls and optimized cross section ensure even fluid distribution and improved efficiency. The zinc outer coating provides corrosion resistance, prolonging the unit’s lifespan.

 

Warranty information: Ten-year limited parts and compressor warranties are available. Twelve-year limited parts and compressor warranties are available if the unit’s installed by a qualifying Mitsubishi Electric Diamond Contractor™.

 

Special installation requirements: Installation must be done by a trained contractor.

 

Contact: Mitsubishi Electric US Cooling & Heating Division; www.mehvac.com.

 

eProduct 198

 

Modine

 

Model: Hot Dawg unit heater

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: The control panel and heat exchanger are easily accessible for seasonal cleaning and maintenance.

 

Technical support: Support is available at 800-828-4328.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Marking Modine’s upcoming 100th anniversary, the Special Edition Hot Dawg provides a stylish new option. When combined with three new appearance kits — Huntin’ Dawg, Diamond Dawg, and Carbon Fiber — the Hot Dawg now has 64 styles to choose from between 30,000 and 75,000 Btuh.

 

Warranty information: Ten-year heat exchanger and one-year parts warranties are available.

 

Special installation requirements: All heaters must be installed by a contractor.

 

Contact: Modine Mfg. Co., 262-636-1200; www.modinehvac.com.

 

eProduct 199

 

Panasonic

 

Model: U-144ME2U9 VRF heat pump

 

Footprint (in inches): 73 (length) by 47 (width) by 40 (height)

 

Serviceability features: ECOi VRF systems have a self-diagnostic auto-check function to alert of alarm conditions. A Web-based controller is available, which controls up to 256 indoor units, and can notify of alarm conditions via email.

 

Technical support: Support is available at 800-851-1235

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; submittal sheets; installation manuals; service manuals; Web training; an 800 number; service/troubleshooting; classroom training; training videos; an HVAC dealer network; and an HVAC distributor network are available.

 

Noise-reduction features: An inverter-driven compressor and variable-speed DC fan motor help reduce operational volume.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The VRF heat pump requires a special thermostat.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: Panasonic’s combined ECOi EX 2-way conditioning solution offers superior heating and cooling coupled with cost-effective installation. The unit serves as an appropriate conditioning solution for large-capacity jobs.

 

Warranty information: Six-year compressor and one-year parts warranties are available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Panasonic Air Conditioning Group, 201-679-2449; business.panasonic.com/hvac.

 

eProduct 200

 

Patterson-Kelley

 

Model: P-K SONIC SC1500 stainless steel condensing boiler

 

Footprint (in inches): 66 (length) by 32 (width) by 69 (height)

 

Serviceability features: The boiler is designed to allow all annual maintenance/service to be done through the easy-hinged front door. Features include easy-lift-out quarter-turn connector panels, upgradable software through a USB port, hydronic delta T monitoring, an interactive 7-inch touchscreen with setup wizard, and lead/lag cascade control with an outdoor reset.

 

Technical support: Support is available through the company’s extensive rep network. Information is available at www.harscopk.com. Factory technical support is available 8 a.m. to 5 p.m. Eastern time, Monday through Friday, at 570-421-7500 option 2.

 

Technical support materials: Installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are included.

 

Noise-reduction features: The unit is barely audible, even at high fire.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats, and, with an optional converter, is capable of communicating through Modbus and other protocols.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Innovative zones of the Duet™ technology heat exchanger were engineered separately using different alloys that, when used together, deliver better heat transfer and higher reliability throughout the condensing process. CAT IV venting AL20-4C, stainless, chlorinated polyvinyl chloride (CPVC) (ULC-S636 Canada), and polypropylene (UL-1738) are offered. The unit is equipped with wheels and can be moved by two people without a forklift.

 

Warranty information: One-year materials and workmanship, five-year burner and heat exchanger, and 10-year heat exchanger against thermal shock warranties are available.

 

Special installation requirements: The unit can be moved easily by two people. Its narrow design allows it to fit through doorways and onto elevators to avoid the need for special rigging.

 

Contact: Harsco Industrial Patterson-Kelley, 570-476-7262; www.harscopk.com.

 

eProduct 201

 

Peerless

 

Model: PureFire® PF460 boiler

 

Footprint (in inches): 27 (length) by 18 (width) by 41 (height)

 

Serviceability features: The front and side covers can be easily removed for quick service access to all major components. The wiring panel features removable terminal strips, which allow plenty of space to make electrical connections. Condensate collectors and hoses have quick-connect clamps for removing and cleaning.

 

Technical support: Support is available 8 a.m. to 4:30 p.m., Monday to Friday, at 610-845-6130 ext. 3. Local technical sales reps are listed by state at peerlessboilers.com with addresses and phone numbers.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Variable-speed combustion blowers significantly reduce mechanical and flame noise. Boilers are often so quiet that visible inspection through the combustion chamber site port is the best way to verify operation.

 

IAQ equipment supported: The equipment meets strict air-quality standards of the California South Coast Air Quality Management District (SCAQMD) for low-NOx emissions.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The unit is capable of combining 16 boilers in a cascade sequence operation without the addition of additional controls. Only one additional temperature sensor is needed. The turndown ratio for burner modulation is 5:1, which allows the output capacity to more closely match the heat demand under various loads.

 

Warranty information: A one-year parts and labor warranty is provided (labor coverage starting on day 31) if the boiler is fully registered (via warranty card or online registration). A 12-year limited heat exchanger warranty is also available. Visit peerlessboilers.com for complete details.

 

Special installation requirements: An appropriate location for the vent termination is very important, whether it’s a vertical chimney, sidewall vent, or one of many terminations shown in the installation, operation, and maintenance (IOM) manual that comes with the boiler. Adequate water flow through the boiler heat exchanger can be assured by selecting an appropriate circulator pump and a primary/secondary piping configuration, as shown in the IOM manual.

 

Contact: PB Heat LLC, 610-369-3297; peerlessboilers.com.

 

eProduct 202

 

RBI Water Heaters

 

Model: Infinite Energy2 boiler

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: All components, including the controls, are easily accessible for service and annual maintenance. The boiler is designed specifically for ease of installation and service.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time, Monday to Friday. A network of manufacturer’s representatives is available across North America for regional service.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: Manufacturer did not specify.

 

Replacement parts compatibility: The unit does not share replacement parts with other models.

 

Additional features: The IE2 features a patented radial variable circulation (RVC) stainless steel heat exchanger constructed with titanium stainless. Each of a series of three tubes is hydraulically connected without welding to deliver maximum durability and corrosion resistance. A custom on-board control system can control multiple unit configurations up to 8,000 MBtuh (eight units) with unparalleled modulation for maximum system efficiency. Using all technologies, including pre-mix burners, modulating firing rates of up to 20:1, and integrated cascade controls, IE2 provides exceptional performance and application flexibility. In a cascading system, modulation levels of 40:1, 60:1, and even 80:1 can be achieved.

 

Warranty information: Manufacturer did not specify.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: RBI Water Heaters, 413-564-5515;
www.rbiwaterheaters.com.

 

eProduct 203

 

Reznor

 

Model: R8HE packaged gas/electric unit

 

Footprint (in inches): 48 (length) by 56 (width) by 31-39 (height)

 

Serviceability features: Refrigerant access ports are located on an external panel. Metering devices are located within reach of the access door. Wires are color-coded according to function. The control board features two status LEDs and a flame signal strength LED eliminates the need to count flashes.

 

Technical support: Support is available from 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Installation instructions, wiring diagrams, technical sales literature, and replacement-parts diagrams are available at www.nordyneu.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; startup instructions; and training manuals are available.

 

Noise-reduction features: A fully insulated cabinet and electronically commutated (EC) blower motor help reduce indoor operation noise. A matched outdoor fan and blade combination come in a one-piece venture.

 

IAQ equipment supported: A humidification terminal is located on the control board.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The condensing package unit can be mounted on a roof or at the ground level. Indoor and outdoor all-aluminum microchannel coils are lightweight and use low volumes of refrigerant, which helps eliminate formicary corrosion. The SmartStart control board feature increases igniter life. Two status LEDs and a flame signal strength LED eliminate the need to count flashes.

 

Warranty information: A commercial one-year all parts warranty is available. Contact Reznor for extended warranty information.

 

Special installation requirements: For roof-mount configurations, the heating condensate drain must be brought to the conditioned interior space. For ground-mount configurations, the heating condensate drain must be brought below the frost line.

 

Contact: Nortek Global HVAC, 636-561-7300;
www.reznorhvac.com.

 

eProduct 204

 

Model: VC/VP infrared heater

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: Gas-fired tubular radiant heaters have convenient panels for easy access to operational parts.

 

Technical support: Support is available at 800-695-1901. Additional information is available at www.reznorhvac.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; and specification sheets are available.

 

Noise-reduction features: Tubular radiant heaters perform quietly.

 

IAQ equipment supported: Since radiant heaters operate with no air movement, there’s no need for filtering (or other treatment) of outside air.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The heater utilizes some shared parts and some unique parts.

 

Additional features: The heater is highly configurable and can be constructed to fit the geometry of the space in which it is being installed. Model VC is water-resistant and can be installed in wash-down areas, car washes, etc.

 

Warranty information: An extended warranty covers all mechanical or electrical parts (five years) and combustion chamber/heat exchanger tubes (10 years).

 

Special installation requirements: When used for spot heating, consider the location of people and what is being done in the space. Radiant heat is line-of-sight; it heats people and objects in the path of its radiant rays.

 

Contact: Nortek Global HVAC, 800-695-1901;
www.reznorhvac.com.

 

eProduct 205

 

Rheem

 

Model: RKHL-D H2AC™ packaged rooftop unit with eSync integration technology

 

Footprint (in inches): 125 (length) by 86 (width) by 58 (height)

 

Serviceability features: The rooftop unit features a slide-out indoor fan assembly and a hinged major access door with heavy-duty gasketing. The single-slab-, single-pass-designed evaporator and condenser coils facilitate easy cleaning. This unit also has externally mounted refrigerant gauge ports, colored/labeled wiring, and the ClearControl™ system for real-time system monitoring, diagnostics, and communication.

 

Technical support: Technical support for installation and service is available with authorized Rheem distributors’ district service coordinator (DSC) personnel. Additional factory support is accessible through a network of Rheem district technical representatives (DTR) assigned to cover a geographic territory, providing field tech support, as needed, to DSC and contractors at the job site. More information is available 24/7 at myrheem.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; an accessories list; tech tips; submittal sheets; service notes; charging information; a use and care manual; job site information sheet (JSIS); and compressor and gas code listings are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Foil-faced insulation is encapsulated throughout the entire unit to minimize airborne fibers in the airstream. An easily removable filter makes regular replacement a trouble-free task for the occupant. The noncorrosive plastic condensate drain pan is sloped to keep runoff from pooling, which reduces the potential for mold and bacteria growth in the unit. The system conforms to ASHRAE-62 standards.

 

Thermostat compatibility: The rooftop packaged unit utilizes a rooftop unit controller (RTU-C) as part of the ClearControl system, which allows for real-time monitoring and communication. This solid-state microprocessor-based control board provides flexible control.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: Rheem’s eSync integration technology (potable water heating) control board is connected to the RTU-C, which allows potable water heat recovery during air conditioning mode. Working as part of a Rheem H2AC system with a Rheem water storage tank and water heater (both sold separately), the rooftop unit provides potable hot water by rejecting the heat from the condenser coil into a water heat exchanger. The preheated water is then sent to a storage tank, where it can be heated to the desired final temperature much more efficiently, on-demand.

 

Warranty information: Rheem will furnish a replacement for any part of this product that fails in normal use and service within the applicable periods stated in accordance with the terms of the limited warranty. The RHKL-D commercial three-phase unit comes with five-year compressor, one-year parts, 10-year factory heat exchanger, and 20-year stainless steel heat exchanger warranties.

 

Special installation requirements: Rheem high-efficiency tankless or commercial tank water heater and storage tanks are recommended for the greatest energy savings potential.

 

Contact: Rheem Mfg. Co.; www.rheem.com.

 

eProduct 206

 

Model: RKPN-C Commercial Classic® Series packaged gas/electric unit

 

Footprint (in inches): 76 (length) by 48 (width) by 35 (height)

 

Serviceability features: The unit has a single-slab microchannel evaporator coil for trouble-free cleaning. The unit has externally mounted refrigerant gauge ports and colored and labeled wiring for quick service diagnostics. The ClearControl system allows for real-time system monitoring, diagnostics, and communication.

 

Technical support: Technical support for installation and service is available with authorized Rheem distributors’ district service coordinator (DSC) personnel. Additional factory support is accessible through a network of Rheem district technical representatives (DTR) assigned to cover a geographic territory, providing field tech support, as needed, to DSC and contractors at the job site. More information is available 24/7 at myrheem.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; an accessories list; tech tips; submittal sheets; service notes; charging information; a use and care manual; a job site information sheet (JSIS); and compressor and gas code listings are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: The filter is easy to remove and replace, creating an uncomplicated filter exchange process for the homeowner. The noncorrosive plastic condensate drain pan is sloped to keep runoff from pooling, which reduces the potential for mold and bacterial growth in the unit.

 

Thermostat compatibility: The system utilizes a rooftop unit controller (RTU-C) as part of the ClearControl system, which allows for real-time monitoring and communication. This solid-state, microprocessor-based control board provides flexible control.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The system is designed to meet a wide range of applications and is enhanced by factory- and field-installed options and accessories. The factory-installed ClearControl, direct digital control (DDC), and sensors can connect to LonWorks or BACnet building automation systems (BAS) for remote monitoring and control.

 

Warranty information: Rheem will furnish a replacement for any part of this product that fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. The RKPN-C commercial unit comes with a five-year compressor and one-year limited parts for single and three-phase products. Three-phrase products also come with 10-year factory standard heat exchanger and 20-year stainless steel heat exchanger warranties.

 

Special installation requirements: RKPN-C models are convertible and can be installed either in horizontal or downflow configurations.

 

Contact: Rheem Mfg. Co.; www.rheem.com.

 

eProduct 207

 

Ruud

 

Model: RKHL-D H2AC™ packaged rooftop unit with eSync integration technology

 

Footprint (in inches): 125 (length) by 86 (width) by 58 (height)

 

Serviceability features: The unit features a slide-out indoor fan assembly and a hinged major access door with heavy-duty gasketing. The single-slab, single-pass-designed evaporator and condenser coils facilitate easy cleaning. This unit also has externally mounted refrigerant gauge ports, colored/labeled wiring, and the ClearControl system for real-time system monitoring, diagnostics, and communication.

 

Technical support: Technical support for installation and service is available with authorized Ruud distributors’ district service coordinator (DSC) personnel. Additional factory support is accessible through a network of Ruud district technical representatives (DTR) assigned to cover a geographic territory, providing field tech support, as needed, to DSC and contractors at the job site. More information is available 24/7 at myruud.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; an accessories list; tech tips; submittal sheets; service notes; charging information; a use and care manual; a job site information sheet (JSIS); and compressor and gas code listings are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Foil-faced insulation is encapsulated throughout the entire unit to minimize airborne fibers from the airstream. An easily removable filter makes regular replacement a trouble-free task for the occupant. The noncorrosive plastic condensate drain pan is sloped to keep runoff from pooling, which reduces the potential for mold and bacteria growth in the unit. It also conforms to ASHRAE-62 standards.

 

Thermostat compatibility: The system utilizes a RTU-C as part of the ClearControl system, which allows for real-time monitoring and communication. The solid-state, microprocessor-based control board provides flexible control.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: Ruud’s eSync integration technology (potable water heating) control board connected to the RTU-C allows potable water heat recovery during air conditioning mode. Working as part of the H2AC system with a Ruud water storage tank and water heater (both sold separately), the rooftop unit provides potable hot water by rejecting the heat from the condenser coil into a water heat exchanger. The preheated water is then sent to a storage tank, where it can be heated to the desired final temperature much more efficiently, on-demand.

 

Warranty information: Ruud will furnish a replacement for any part of this product that fails in normal use and service within the applicable periods stated in accordance with the terms of the limited warranty. The RHKL-D commercial three-phase product comes with five-year compressor, one-year parts, 10-year factory heat exchanger, and 20-year stainless steel heat exchanger warranties.

 

Special installation requirements: Ruud high-efficiency tankless or commercial tank water heaters and storage tanks are recommended for the greatest energy savings potential.

 

Contact: Ruud; www.ruud.com.

 

eProduct 208

 

Model: RKPN-C Commercial Achiever® Series packaged gas/electric unit

 

Footprint (in inches): 76 (length) by 48 (width) by 35 (height)

 

Serviceability features: The unit has a single slab, microchannel evaporator coil for trouble-free cleaning; an easily removable filter; a blower; gas heat; a compressor; and control access panels. It has externally mounted refrigerant gauge ports and colored and labeled wiring for quick service diagnostics. The ClearControl system allows for real-time system monitoring, diagnostics, and communication.

 

Technical support: Technical support for installation and service is available with authorized Ruud distributors’ district service coordinator (DSC) personnel. Additional factory support is accessible through a network of Ruud district technical representatives (DTR) assigned to cover a geographic territory, providing field tech support, as needed, to DSC and contractors at the job site. More information is available 24/7 at myruud.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; specification sheets; an accessories list; tech tips; submittal sheets; service notes; charging information; a use and care manual; a job site information sheet (JSIS); and compressor and gas code listings are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: The filter is easy to remove and replace, creating an uncomplicated filter-exchange process for a homeowner. The noncorrosive plastic condensate drain pan is sloped to keep runoff from pooling, which reduces the potential for mold and bacterial growth in the unit.

 

Thermostat compatibility: The system utilizes a RTU-C as part of the ClearControl system, which allows for real-time monitoring and communication. The solid-state microprocessor-based control board provides flexible control.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The system’s designed to meet a wide range of applications, and enhanced by factory- and field-installed options and accessories. The factory-installed ClearControl, direct digital control (DDC), and sensors can connect to LonWorks or BACnet building automation systems (BAS) for remote monitoring and control.

 

Warranty information: Ruud will furnish a replacement for any part of this product that fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. The RKPN-C commercial unit comes with five-year compressor and one-year limited parts warranties for single- and three-phase products. Three-phrase products also come with 10-year factory-standard heat exchanger and 20-year stainless steel heat exchanger warranties.

 

Special installation requirements: RKPN-C models are convertible and can be installed either in horizontal or downflow configurations.

 

Contact: Ruud; www.ruud.com.

 

eProduct 209

 

Samsung

 

Model: AC030JXSCCH/AA CAC Nordic (low ambient) heat pump

 

Footprint (in inches): 37 (length) by 13 (width) by 56 (height)

 

Serviceability features: Samsung’s communication protocol allows for system option setting and system firmware updating via service software. A user may simply connect to the main communication wire at the indoor or outdoor unit to program and commission the system. Error notifications can be received on Samsung’s Smart Home App when the optional Wi-Fi adapter is connected.

 

Technical support: Support is available 7 a.m. to 7 p.m. Central time, Monday to Friday, at 888-699-6067. Installation, user, and service manuals, and other documents are available at www.dvmdownloads.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Twin brushless DC (BLDC) rotary compressor with jacket and BLDC fan motors provide quiet operation. Nighttime quiet mode can be enabled to reduce unit noise in the evenings by reducing fan speed and compressor frequency. Nighttime quiet mode is enabled based on temperature and time or manually initiated with a 0-V input.

 

IAQ equipment supported: The outdoor unit can connect to high-static-pressure duct units that can accommodate high-performance filters. Modulating capacity provides longer run times with lower-frequency operation to maintain a cold evaporator coil for longer periods to provide exceptional humidity removal while in cooling mode.

 

Thermostat compatibility: The heat pump requires a special thermostat.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The new Nordic models are available in 2.5- and 3-ton models (AC030JXSCCH/AA, AC036JXSCCH/AA) and provide exceptional heating performance at low ambient temperatures. At minus 13°F, the AC030JXSCCH/AA can provide up to 29,400 Btuh and AC036JXSCCH/AA can provide up to 32,500 Btuh. These models are compatible with AC0**JNHDCH/AA duct units and AC0**JN4DCH/AA four-way cassette units.

 

Warranty information: Ten-year compressor, 10-year parts, and one-year limited labor warranties are available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Samsung, 817-838-6066; www.quietside.com.

 

eProduct 210

 

Sharp

 

Model: AE-X18TU ductless mini-split heat pump

 

Footprint (in inches): 33 (length) by 13 (width) by 28 (height)

 

Serviceability features: Manufacturer did not specify.

 

Technical support: Manufacturer did not specify.

 

Technical support materials: Manufacturer did not specify.

 

Noise-reduction features: A silent mode is available for the indoor unit.

 

IAQ equipment supported: Patented Plasmacluster ion air purification technology suppresses activity of airborne viruses, microbes, and mold spores.

 

Thermostat compatibility: Manufacturer did not specify.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Features include the Plasmacluster ion air purification technology, multi-space mode for multiple room air conditioning, long-distance airflow control (up to 39 feet away), operation down to  minus 4°F, anti-corrosion coating, and multiple drainage holes on the outdoor unit.

 

Warranty information: Six-year parts and seven-year compressor warranties are available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Sharp Electronics;
www.sharp-world.com/products/minisplit/.

 

eProduct 211

 

Sterling HVAC Products

 

Model: Xcelon packaged unit

 

Footprint (in inches): Manufacturer did not specify.

 

Serviceability features: All components, including the controls, are easily accessible for service and annual maintenance. The unit is designed specifically for ease of installation and service with hinged access and LED service lights.

 

Technical support: Support is available 8 a.m. to 5 p.m. Eastern time, Monday to Friday. A network of manufacturer’s representatives is available across North America for regional service.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Manufacturer did not specify.

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: Manufacturer did not specify.

 

Additional features: The system’s designed to be an energy-efficient rooftop makeup air unit (up to 98 percent efficient). Xcelon uses high-efficiency condensing boilers in a hydronic, self-contained system that does not require any external water supply source. The unit’s fully modulating, 10:1 turndown configuration allows for precision temperature control to ensure constant discharge air temperatures, even during the lowest part-load conditions. By using water as an energy transfer medium, Xcelon is able to transfer the same amount of heat in a much smaller surface area than air-to-air heat exchangers.

 

Warranty information: One-year unit warranty is available. Additionally, five-year heat exchanger, draft hood, assembly, and burner warranties are also available.

 

Special installation requirements: Manufacturer did not specify.

 

Contact: Sterling HVAC Products, 413-568-9571;
www.sterlinghvac.com.

 

eProduct 212

 

Tempstar

 

Model: PHR5 packaged heat pump

 

Footprint (in inches): 33-44 (length) by 48-49 (width) by 44-55 (height)

 

Serviceability features: The system installs easily on a rooftop or at the ground level. Three panels allow easy access for maintenance and installation. The unit easily converts for down-discharge applications.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gotempstar.com.

 

Noise-reduction features: The heat pump includes a two-stage Copeland Scroll compressor, which operates most of the time in the quiet low stage. The outdoor fan is sized and optimized for minimal noise.

 

IAQ equipment supported: Enhanced dehumidification is available on high-stage cooling through the use of a dehumidistat. The unit’s accessory filter racks support 2-inch filters.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Two-stage Copeland Scroll compressors provide two-stage heating and cooling operation. Units include field-convertible airflow for either ground level (horizontal) or rooftop (down) airflow and high-efficiency electronically commutated (EC) indoor blower motors. With cooling efficiencies up to 15.5 SEER and 12.5 EER, the PHR5 packaged heat pumps are Energy Star-qualified.

 

Warranty information: Five-year limited compressor and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gotempstar.com.

 

eProduct 213

 

Model: RGS210-336 packaged gas/electric unit

 

Footprint (in inches): 128-158 (length) by 87 (width) by 49-57 (height)

 

Serviceability features: These units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points are conveniently located on the master terminal board. Access panels feature easy-grip handles and a no-strip screw feature. The exclusive IGC solid-state control provides on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.

 

Technical support: Factory-trained technical service advisors (TSAs) on staff at local distributors provide technical assistance and troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and product information are available at www.gotempstar.com.

 

Noise-reduction features: Belt-driven evaporator fans provide quiet and efficient operation.

 

IAQ equipment supported: The unit supports 2-inch return air filters. An optional economizer control accepts a CO2 sensor for IAQ capability. A duct-mounted CO2 sensor accessory is available for field installation to provide outdoor air for demand-controlled ventilation (DCV) capability on demand.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: The unit features dedicated vertical or horizontal airflow duct configuration models. This ASHRAE 90.1-compliant unit features high- and low-pressure switches. The Scroll compressor has internal line-break overload protection. Factory-installed options include high-, medium-, and low-heat options; stainless steel heat exchangers; and a high-static indoor fan option. Liquid propane/high-altitude kits are also optional.

 

Warranty information: Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized heat exchanger, five-year limited compressor, and one-year limited all other parts warranties are available.

 

Special installation requirements: None.

 

Contact: International Comfort Products, 615-777-8588; www.gotempstar.com.

 

eProduct 214

 

TETCO

 

Model: TVS/TVT ION Series compact vertical packaged geothermal heat pump

 

Footprint (in inches): 23 (length) by 23 (width) by 37 (height)

 

Serviceability features: Common service components, including a desuperheater, a reversing valve, a blower motor, refrigerant ports, a thermostatic expansion valve (TXV), and the filter drier, are accessible from the front panel. A hinged control box tilts up and out of the way for access to controls, wiring, and internal components. An inner front panel allows for refrigerant and electrical service work while the unit is operational.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and YouTube video instructions are available.

 

Noise-reduction features: A heavy-gauge compressor mounting plate with multiple durometer rubber and elastomeric vibration absorption pads provide exceptional compressor and blower motor isolation. High-density, Greenguard-certified, closed-cell foam insulation helps absorb sound. A heavy-gauge galvanized or pre-painted sheet metal cabinet is engineered and built to meet industry sounds and leakage guidelines.

 

IAQ equipment supported: Enertech offers an optional field-installed accessory filter rack that accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit features some shared parts and some unique parts.

 

Additional features: An all-aluminum microchannel air coil improves efficiency while eliminating failures caused by formicary corrosion. The control box is easily accessible. A foam-insulated, flat-wound, enhanced-surface coaxial heat exchanger improves heat transfer and efficiency. A standard permanent split capacitor (PSC) blower motor (single-stage) or electronically commutated motor (ECM) blower (two-stage) offer exceptional efficiency. ECM motors are optional on single-stage equipment.

 

Warranty information: A one-year limited parts-only warranty is available. Optional extended warranties are also available.

 

Special installation requirements: Its small footprint, front-mounted plumbing, and side-entry electrical connections are ideal for retrofit or new build applications. The purpose-build model uses many of the design innovations found throughout the product line and incorporates them into a compact, efficient, and technician-friendly package.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 215

 

Model: TYT ES5 Series vertical packaged geothermal heat pump

 

Footprint (in inches): 31 (length) by 25 (width) by 58 (height)

 

Serviceability features: Top-mount, eye-level digital controls or optional side-mount configurations are available. The thermostatic expansion valve (TXV) and filter drier are located in the blower section. A front panel window allows a user to view status lights without opening the cover. All cabinet panels are removable for ease of service and access to all components and test point locations.

 

Technical support: Support is available 24/7 at 618-664-9010 or technicalservices@enertechgeo.com. Installation, service, marketing, and sales training can be arranged by contacting Enertech’s Geothermal University at 618-664-3255, training@geothermaluniversity.com, or by visiting www.geothermaluniversity.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; startup instructions; and YouTube video instructions are available.

 

Noise-reduction features: Elastomeric compressor isolation pads separate the Copeland UltraTech two-stage Scroll compressor from the unit. Internal copper tubing employs an enhanced shock-loop design, which also prevents compressor vibration from transmitting through other internal components. High-density, Greenguard-certified, closed-cell foam insulation is used throughout the unit to absorb sound.

 

IAQ equipment supported: Enertech offers an optional field-installed accessory filter rack that accepts a 1- or 2-inch disposable pleated filter. Lifetime washable electrostatic filters or electronic air cleaners with disposable media packs are available, as well. Most other air filtration, humidification, or purification systems are compatible with Enertech products.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: The multi-positional cabinet is left- or right-hand return field-convertible. An eye-level, top-mounted control box is included. The unit boasts side or back discharge options, and an all-aluminum microchannel air coil eliminates failures caused by formicary corrosion. A foam-insulated, enhanced-surface coaxial heat exchanger protects against corrosion and improves performance. A variable-speed electronically commutated (EC) blower motor delivers optimum airflow. The SoftStart option comes factory-installed.

 

Warranty information: A one-year limited parts-only warranty is available. Optional extended warranties are also available.

 

Special installation requirements: Standard ground-source heat pump installation practices apply to all Enertech Global LLC products.

 

Contact: Enertech Global LLC, 618-690-3236;
enertechgeo.com.

 

eProduct 216

 

Trane

 

Model: Blower Coil

 

Footprint (in inches): 31 (length) by 24 (width) by 14 (height)

 

Serviceability features: Electronically commutated motors (ECMs) eliminate belt and sheave maintenance and replacement. VelociTach™ ECM control board provides real-time feedback of motor speed and allows service personnel to easily change motor speed set points. Removable sloped drain pans are easy to clean during routine maintenance. Units have hinged doors with captive fasteners, and filter boxes have a bottom or top filter access box for improved accessibility.

 

Technical support: Support is available for installation/service through the local sales office service department.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Variable-speed technology adjusts the fan speed to meet a space’s changing needs. This soft-ramp technology maintains low fan speed and moderated airflow, delivering quiet system performance.

 

IAQ equipment supported: The unit supports dual sloped drain pan, MERV-13 filters, and foil-faced insulation options. Units may be ordered with a CO2 sensor option for demand control ventilation (DCV).

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit utilizes some shared parts and some unique parts.

 

Additional features: ECMs come standard on all blower coils. The blower coils also feature direct-drive fans, which are more reliable and requires less maintenance than belt-driven fans. They eliminate belt-driven energy losses and create less vibration, resulting in a quieter, more efficient unit. The VelociTach motor control board features an LED display and manual controls. This provides real-time feedback without the inconvenience of needing a remote service tool. Controls are factory-installed, wired, and configured to customer specifications and can operate alone or as part of a building automation system (BAS).

 

Warranty information: A standard one-year parts warranty is available. Optional extended warranties (up to five years) are available on parts and labor.

 

Special installation requirements: None.

 

Contact: Trane; www.trane.com.

 

eProduct 217

 

Unico

 

Model: IS18G050 iSeries G-50 heat pump

 

Footprint (in inches): 35 (length) by 14 (width) by 25 (height)

 

Serviceability features: This small-capacity (1-1.5 ton), high-efficiency unit, when paired with the iSeries high wall unit, is ideal for low ambient cooling such as a server room or wine cellar. iSeries ductless indoor units can achieve 100 percent of rated capacity at outdoor temperatures down to 5°F and at least 65 percent of rated capacity down to minus 15°F. At more moderate temperatures, the system can achieve greater than 100 percent of rated capacity.

 

Technical support: Support is available 7 a.m. to 5 p.m. Central time at 800-527-0896.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: Due to its inverter technology, the outdoor unit is inherently quiet. Sound output is just 47 dB. The high-wall indoor units are exceptionally quiet at just 23 dB while running. This is the equivalent of a soft whisper.

 

IAQ equipment supported: The permanent filter in the high-wall unit is easily removed for cleaning. No replacement filters are needed.

 

Thermostat compatibility: The heat pump requires a special thermostat.

 

Replacement parts compatibility: The system does not share replacement parts with other models.

 

Additional features: The system offers the ability to connect multiple indoor units, both ducted and non-ducted, to one outdoor unit and run them simultaneously with high SEER ratings. The unit also operates at a broad range of outdoor temperatures, from minus 25° to 122°F. The outdoor unit compressor never turns off; rather, it matches the power request of the indoor units, resulting in more efficiency and energy savings because the compressor isn’t always cycling on and off. Indoor high-wall units come standard with a thermostat remote control, which can also be mounted to a wall like a standard thermostat. The remote can be programmed to control up to four units at once.

 

Warranty information: A one-year parts warranty is available from the date of installation and five year warranties are available for dealers certified through field or online training.

 

Special installation requirements: The multi-split outdoor unit comes with four accessible refrigerant ports to operate multiple ducted or ductless units at the same time. Installation of the indoor high-wall units is made easy by the compact design and light weight. The larger of the two indoor units measures 9-by-39-by-11 inches and weighs 26 pounds. The units are easy to mount on a wall, and refrigerant lines are easily connected to the outdoor unit.

 

Contact: Unico Inc., 800-527-0896; www.unicosystem.com.

 

eProduct 218

 

WaterFurnace

 

Model: Envision2 Series NXW chiller

 

Footprint (in inches): 43 (length) by 24 (width) by 57 (height)

 

Serviceability features: The chiller features a heavy-gauge galvanized steel enclosure with hinged access panels that can easily be removed. Two Schrader service ports are provided for each circuit. A lockout/tagout feature keeps the unit off during service. A keyed service door features a low-voltage emergency stop button with an optional factory-mounted disconnect switch.

 

Technical support: Support is available at 800-257-5667.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available.

 

Noise-reduction features: A heavy-gauge insulated sheet metal cabinet helps reduce spot noise. The optional IntelliStart three-phase soft starter will reduce the normal start current (LRA) by 40 percent. Using IntelliStart also provides a substantial reduction in vibration, reduces startup noise, and improves the compressor’s start behavior. (Available on NXW120-240, 460/60/3 units only.)

 

IAQ equipment supported: Manufacturer did not specify.

 

Thermostat compatibility: The system is compatible with most thermostats.

 

Replacement parts compatibility: The unit shares replacement parts with other models.

 

Additional features: Available in 10- to 50-ton capacities, the NXW will fit through most doors and features external fork truck lifting points for easy installation. Designed to perform to the highest standards in the industry, the NXW is used for pools, commercial aquariums, radiant floor heating, ice melt, chilled water applications, industrial process water, or to provide precisely heated or cooled water for fan coils or other applications.

 

Warranty information: An 18-month parts-only warranty is available.

 

Special installation requirements: None.

 

Contact: WaterFurnace Intl. Inc., 260-478-5667;
www.waterfurnace.com.

 

eProduct 219

 

York

 

Model: VRF heat recovery systems and VRF heat pump systems

 

Footprint (in inches): 31 (length) by 38 (width) by 68 (height)

 

Serviceability features: Outdoor units have been specifically designed for ease of access to the compressor, electrical panels, and other components by removing two front panels (four screws for each panel).

 

Technical support: Support is available 7 a.m. to 5 p.m. Central time at 844-873-4443 or be-vrfftechsupport@jci.com. For training support, call 844-873-4443 or e-mail be-vrftraining@jci.com. For applications and design presale assistance, call 844-873-6755 or email be-vrfapplicationdesign@jci.com.

 

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; a parts list; a troubleshooting guide; specification sheets; and startup instructions are available. Variable refrigerant flow (VRF) training materials are available upon completion of VRF courses at the Johnson Controls’ VRF training center.

 

Noise-reduction features: Outdoor units operate as quietly as 55 dBA. Indoor units operate as quietly as 24.5 dBA.

 

IAQ equipment supported: Indoor units have several options for IAQ, including a filter box when a high-efficiency filter is required. An anti-bacterial air filter inhibits the growth of bacteria. A fresh-air inlet kit may be used when connecting outside air directly to the unit, and replacement filters are readily available.

 

Thermostat compatibility: VRF systems offer a wide range of control systems to suit multiple applications, including wired and wireless controls, touchscreen central station and computerized control options, and BACnet adapter for control by way of building management systems. Available controllers include a simplified wired zone controller, a central station with a large and mini computerized central controller, and a BACnet adapter.

 

Replacement parts compatibility: The unit does not share replacement parts with other models.

 

Additional features: The core technology of these VRF systems is the exclusive Hitachi-designed high-efficiency scroll compressor with inverter technology. The meticulous engineering of the compressor delivers a high compression ratio, excellent reliability, and a lower noise level with an efficiency rating of 29.5 SCHE.

 

Warranty information: Seven-year limited compressor, five-year limited parts, and 30-day limited labor warranties are available. A one-year limited parts warranty is offered at purchase, and extension of the parts warranty to five years is offered with product registration and successful completion of the installation and commissioning class at the Johnson Controls VRF training center.

 

Special installation requirements: Contractors should utilize best practices in brazing techniques and have an understanding of the use of each zone within the building to better take advantage of the benefits offered by VRF. The Johnson Controls VRF training center offers several modular training classes with expert instructors and hands-on experience in a comprehensive VRF system laboratory. Classes are also offered through local channel partners.

 

Contact: Johnson Controls Inc., 414-524-5487; www.johnsoncontrols.com/vrf.

 

eProduct 220

 

Publication date: 10/05/2015

 

 

 

PHOTO: [grid.pdf]

 

PHOTO: [FS-grid.jpg]

 

PHOTO: [FS-grid_alt.jpg]

 

PHOTO: [YT036_SHOWCASE_2_TETCO_FRONT_LEFT.jpg]

 

PHOTO: [YT036_SHOWCASE_2_HYDRON_FRONT_LEFT.jpg]

 

PHOTO: [YT036_SHOWCASE_2_GEOCOMFORT_FRONT_LEFT.jpg]

 

PHOTO: [xcelon.jpg]

 

PHOTO: [WFI-Envision2-NXW.jpg]

 

PHOTO: [Unico_iSeries_G50.jpg]

 

PHOTO: [U-144ME2U9.jpg]

 

PHOTO: [TSL_Cabinet_and_Chassis.jpg]

 

PHOTO: [Trane_Blower_Coil.jpg]

 

PHOTO: [TETCO_Front_VS_Comm.jpg]

 

PHOTO: [Tempstar_RGS210-336.jpg]

 

PHOTO: [Tempstar_PHR5.jpg]

 

PHOTO: [SONIC_w-NURO_12-11-14.jpg]

 

PHOTO: [RU_RKNL-G_3-5_TON.jpg]

 

PHOTO: [RU_Package_Gas_Electric__RKHL_D_.jpg]

 

PHOTO: [Round_Flow_Sensing_Cassette_with_Sensor.jpg]

 

PHOTO: [RheemH2ACUnit_HighResHeroic.jpg]

 

PHOTO: [RH_RKNL-G_3-5_TON.jpg]

 

PHOTO: [ReznorRadiant.jpg]

 

PHOTO: [Reznor-R8HE-Gas-Pack-bty.jpg]

 

PHOTO: [REYQ-T_HR.jpg]

 

PHOTO: [Rebel_model_DPS_16_-_28_ton.jpg]

 

PHOTO: [RC125DHXEB_003_R-perspective_White.jpg]

 

PHOTO: [ProFire-Q_Series_Burner.jpg]

 

PHOTO: [PF300-PF460_Pik.jpg]

 

PHOTO: [Modine_Special_Edition_Hot_Dawg_and_Appearance_Kits.jpg]

 

PHOTO: [Magic-Pak_TCS_Product_Profile.jpg]

 

PHOTO: [LG_MULTI_F_MAX_Outdoor_Unit.jpg]

 

PHOTO: [Laars_MagnaTherm_Right_4x6.jpg]

 

PHOTO: [L-Generation_Air_Source_VRF_Outdoor_Units.jpg]

 

PHOTO: [KeepRite_RGH060.jpg]

 

PHOTO: [KeepRite_PGR5.jpg]

 

PHOTO: [johnson_s_0007_york.jpg]

 

PHOTO: [IE2_750_LeftFront.jpg]

 

PHOTO: [ICP_Commercial_RGH181-303.jpg]

 

PHOTO: [ICP_Commercial_RGH060.jpg]

 

PHOTO: [HVT_Residential.jpg]

 

PHOTO: [Heil_RGH181-303.jpg]

 

PHOTO: [Heil_PGR5.jpg]

 

PHOTO: [HBH_compact_3x5_CA.jpg]

 

PHOTO: [GeoComfort_Front_VS_Comm.jpg]

 

PHOTO: [FTXL_boiler_Hero.jpg]

 

PHOTO: [FHP-LV-splits1.jpg]

 

PHOTO: [DayNight_RGS210-336.jpg]

 

PHOTO: [DayNight_RGH090-150.jpg]

 

PHOTO: [Comfortmaker_RGH181-303.jpg]

 

PHOTO: [Comfortmaker_PHR5.jpg]

 

PHOTO: [ClearFire-LC.jpg]

 

PHOTO: [Century-HBH-Large.jpg]

 

PHOTO: [Carrier_WeatherMaster_50HCQ_Packaged_Rooftop_Unit.jpg]

 

PHOTO: [BRYANT-Legacy_580J.jpg]

 

PHOTO: [Arcoaire_RGX036-060.jpg]

 

PHOTO: [Arcoaire_RGH090-150.jpg]

 

PHOTO: [Allied-Commercial-Z-Series.jpg]

 

PHOTO: [AE-X18TU.jpg]

 

PHOTO: [25_Ton_Rooftop__DCC-300__HR.jpg]

 

PHOTO: [48N_3.jpg]

 

PHOTO: [460V_VRF_System.jpg]

 

PHOTO: [570J07-12.jpg]

 

PHOTO: [3-5_Ton_DTC-DTH-DTG_HR2.jpg]

 

PHOTO: [2014_Logo_Wall_Mount_Gas_Electric-1.jpg]

 

www.boschheatingandcooling.com

peerlessboilers.com