We probably heard it many times growing up, the old adage that an ounce of prevention is worth a pound of cure. When it comes to your customer’s HVAC system, preventive maintenance not only increases the life of the system, improves energy efficiency, and reduces pollutants, but it also saves homeowners money.
Bob gets a call from the dispatcher that a new customer, a restaurant, has some ductwork in the dining room that has been sweating during the lunch hour for the last several days and dripping on the customers. It is about lunchtime so Bob goes to the restaurant to check it out. Btu Buddy helps in solving the problem.
This month’s problem piece of equipment is a soda vending machine. The complaint from the customer, who has positioned the unit outside their small motel, is that while the soda seems to be properly cooled during the middle of the day, there are times when the product is warmer than desired.
This service call is for a routine checkup on an old 7½-ton unit using R-22. The call is going well until the owner mentions to Bob that the unit has actually never cooled well. Bob then proceeds to do a complete check of the system with Btu Buddy’s assistance.
A critical element of motor servicing technique is being able to determine whether or not a replacement motor that is not an exact duplicate of the original is suitable for the application. As a technician, you must consider a number of factors, but this article focuses on one of the more important issues: nameplate amps.
Bob receives a call from the dispatcher telling him about a restaurant that is having difficulties. When he gets on the roof at the restaurant he notices that the unit's fan motor is turning, but seems to be very slow. As he approaches the condensing unit, the fan stops. With Btu Buddy's help, Bob diagnoses the problem.
When a refrigeration system is designed to maintain a product temperature at or below the freezing temperature of water, there will always be a necessity for the system evaporator to be defrosted at some sort of interval (due to the fact that air may contain large quantities of moisture).
In this issue’s troubleshooting situation, the problem unit we’re facing is a reach-in refrigerator in a restaurant and the customer’s description of the problem is that they discovered spoiled food in the cabinet when they arrived early in the morning prior to opening.
Bob gets a call to go to an office building where its water-cooled chiller is not cooling the building. Bob finds that the suction pressure is a little low and the head pressure is about right but the unit is not cooling the water down to the 45°F design setting. Btu Buddy helps him in going step by step to solve the problem.
When you’re troubleshooting a refrigeration control system, keep in mind that no matter how complicated the schematic might look on paper, the control system is actually only trying to provide a few simple outcomes.