The compressor’s discharge temperature can tell the service technician what is going on inside a refrigeration or air conditioning system. The compressor’s discharge temperature is a reflection of the hottest part of a refrigeration system, and there are limits as to how hot a discharge temperature should be. This article will explore discharge temperatures and their limits.
Current starting relays are used on single-phase, fractional horsepower motors requiring low starting torque. Their main function is to assist in starting the motor. Start and run capacitors can be used in conjunction with current relays to boost both starting and running torque.
The compressor's discharge temperature is often an overlooked temperature when troubleshooting a refrigeration or A/C system. However, it's very important because it's an indication of the amount of heat absorbed in the evaporator and suction line, and any heat of compression generated by the compression process.
Soldering is a viable method of joining ACR tubing and components while servicing and installing refrigeration systems. However, not all types of solders can be used satisfactorily.
What should the amperage draw be of a compressor in which the nameplate says the RLA (rated load amperage) is 59.6, but the compressor is only pulling 45 amps? Is there a problem here? Do we need to change the compressor?
A common refrigeration equipment service problem occurs when an evaporator or its drain pan becomes completely engulfed in ice, and the technician needs to de-ice them. Here are ways to de-ice the coil - the right way.
Compressor overheating is one of the industry's most serious field problems today. One of the most elusive causes of compressor motor overheating and failure is voltage unbalance. This article addresses voltage unbalance in three-phase compressor motors.
The problem: A piston-type reciprocating compressor has valve damage, or the valves are not sealing for some reason. The result: an inefficient compressor. This is one of the most difficult service problems to diagnose because the system may still have some cooling capacity.
The electronic expansion valve (EEV) operates with a much more sophisticated design than a conventional TXV. Here are some electronic expansion valve basics.
This article explores how a restricted metering device will affect system performance and efficiency. The system is a commercial refrigeration system with a thermostatic expansion valve (TXV) as the metering device.