When you stroll the AHR Expo floor this year, don’t leave things to chance. Nobody likes homework, but a little advance scouting out products of interest can save precious time in Las Vegas. We’ll wager something useful will catch your eye in our annual “show article.”

We’ve continued our tradition of asking exhibitors to let us know about their best (and often newest) offerings on display for attendees at this year’s AHR Expo. Likewise, they’ve continued their tradition of sending us a slew of announcements and press releases, which we have pared down to the article you see before you.

There’s a lot of good stuff here, so do have a look for some new products to improve your own job performance. As always with this particular feature, if a particular claim gets your attention, feel free to follow up with the company’s personnel at the booth. Otherwise, enjoy this, your chance to walk the show from your desk.

Actuators

Schneider Electric has added its M900 series of electro-mechanical spring return actuators to its family of FORTA two- and three-way globe valve actuators. The M900 series, designed specifically for hot water, chilled water, and steam valve applications, offers flexible input signals; spring return that reacts in instances of power failures; brushless DC motors and a high resolution control board for very fine fluid control; automatic calibration of the input signal span; and simple configuration for special applications including valve sequencing, valve position feedback span selection, valve stroke timing, and control valve flow curve behavior. (Booth C2269)

BAS / EMS

Invensys Operations Management has released its Industry Application for Facility Management Solutions (FMS), version 3.0, with its endorsed software partner ConneXSoft. This release enhances the capabilities for FMS solutions built on Wonderware System Platform by deepening integration for the major FMS protocols already supported. It also enables connectivity and integration to new protocols and devices so that system integrators and customers now have resources to build and deliver more advanced and broader FMS solutions. The solution is able to collect and process building automation information from large distributed campuses or multi-building/multi-site operations to allow central supervision. (Booth N5138)

VYKON will feature its full line of Niagara Framework-based intelligent building automation and control, security, and energy management solutions at the show. Hardware includes additions to its portfolio of intelligent building controllers including the new JACE NXT, a Windows-based, high-performance controller configured with the full functions of the Niagara Framework®. Also on display will be a JACE-600 that is ARRA compliant, and a new Z-Wave driver and option card. On the security side, the group will be demonstrating VYKON Security 2.1, the latest access control and security management solution, and VYKON Video which provides seamless integration between today’s building applications and digital video recorders, IP cameras, network video recorders, and video management solutions. (Booth N5756)

E-Mon LLC’s Web-Mon is an internet-enabled energy monitoring device that provides energy data via any standard internet browser. A built-in website right out of the box, Web-Mon requires no add-on software or programming to provide a dashboard display of a wide variety of energy parameters from up to 24 meter inputs. Real-time meter data is displayed alongside historic readings from the previous seven, 30, and 365 days. Typical customers include government facilities, hospitals, schools, universities, commercial and industrial facilities, utilities, and multi-tenant residential facilities. (Booth N4947)

Contemporary Controls’ BAS Remote is one of the first products to receive Sedona Framework™ certification. The BAS Remote is already BACnet/IP and Modbus TCP compliant; the newly acquired Sedona Framework SOX compliance increases the BAS Remote’s versatility as an integration and control device. It is a Linux-based machine and has an Ethernet TCP/IP port. Programming the BAS remote is accomplished using either Niagara Workbench or Sedona Workbench. (Booth 4963)

Pedigree’s HVAC monitoring program gives service companies an edge on their competition by watching customer’s equipment and alerting service techs with the diagnostics information they need to quickly respond. This allows companies to immediately start offering premium services by monitoring RTUs, boilers, chillers, and refrigeration systems from just about any vendor. (Booth 5349)

Boilers

Raypak will unveil new and larger sizes (2,000 to 5,000 MBtuh) of its MVB vertical modulating boiler family at the AHR EXPO 2011. Introduced in 2005, the MVB advanced the state-of-the-art combustion for vertical boilers. Its rugged, compact design and self-tuning fuel/air ratio system provide for easy start up and smooth operation under fluctuating gas conditions with 87% efficiency at all firing rates. Other features include a new cutting edge combustion system and multi-function electronic control. (Booth C1350)

Fulton recently expanded its line of popular Vantage series condensing hydronic boilers to include a 6 MMBtuh input model, which features thermal efficiencies up to and greater than 99% when firing on natural gas. The introduction of the Vantage 6 MMBtuh input model into the hydronic heating market creates opportunities for the reduction of energy usage and overall environmental impact of systems with large energy requirements. Vantage models are built to be exceptionally tolerant of varying system conditions. The boilers feature a robust condensing heat exchanger of Duplex alloy steel, offering corrosion resistance and low thermal expansion rates for ultra-high-efficiency condensing applications. (Booth C1951)

Bryan Steam offers three additional Triple-Flex™ (patent pending) Ultra-High Efficiency Condensing “Flexible Water Tube” boiler models, the TF 150, TF 200, and TF 250. In addition to model TF 300’s existing 3,000 MBtuh input, these models offer inputs from 1,500 to 2,500 MBtuh with sub 30 ppm NOx utilizing a hybrid metal fiber burner. The Triple-Flex models continue to offer a guaranteed minimum thermal efficiency of 90% in worst case condensing boiler operating conditions, such as 160°F return water, and 180° supply water at 100% firing load. Other features include easily replaceable stainless steel flexible tubes and a variable speed combustion air blower. (Booth C308)

Burnham Commercial has announced that its popular C-Series product line has been expanded to include four new, larger sizes. The new 125-, 150-, 175-, and 200-hp models are available for immediate order. To request a copy of the C-Series brochure, go to the Burnham Commercial website at http://steel.burnhamcommercial.com/contact or contact your local Burnham Commercial sales representative. Electronic copies are also available by request or online at www.burnhamcommercial.com. (Booth C862)

Parker Boiler now offers its TC Series of condensing hot water boilers. The boiler is available in sizes from 399,000 up to 5,443,000 Btu input, with stainless steel construction for resistance to corrosion at low operating temperatures. This offering is a proven European design built for extremely high efficiency. Efficiencies to 99.7% have been witnessed and verified by a nationally recognized test lab. The units are available with conventional gas burners or Low NOx power type burners. The units are ETL Listed as complete “Gas Fired Boiler Assemblies” per UL 795. Units under 2.0 MMBtuh input have completed SCAQMD 1146.2 certification. (Booth C735)

Boiler Controls

The Beckett AquaSmart boiler control for both oil- and gas-fired boilers now features the 2N1 sensor, which senses the presence as well as the temperature of boiler water. With advanced electronics and easy installation, AquaSmart will automatically adjust the water temperature in the boiler for optimum efficiency, as well as provide a low water cut off safety. In addition, the AquaSmart features hot water priority, ensuring hot water availability when needed and the peace of mind of freeze resistance and the safety of low water cut off. (Booth C963)

Compressors

Tecumseh Products Company will showcase its R134a large frame rotary compressor for telecommunications cooling, process chillers, and mobile transport air conditioning applications. The new lineup of RN rotary compressors exceeds 11.0 EER, and covers a capacity range of 18,000 to 22,000 Btuh. Rotary compressors offer greater efficiency, lighter weight, lower noise and increased reliability compared to reciprocating counterparts, all important considerations in mission-critical applications. The initial release includes three (3) 208-230 VAC, 60 Hz, single-phase models. Additional dual voltage and three phase RN R134a compressor models are slated for release in early 2011. (Booth C1007)

Cooling Towers

Protec’s FRS CTI Certified cooling tower is a cost-effective solution for counterflow horizontal discharge applications in commercial, institutional, and industrial applications. The FRS model is CTI STD201 Certified. All major components of the FRS Series: have been developed to ensure maximum efficiency with low energy consumption. Its cross flow design offers ease of maintenance. Its small footprint meets the limited space requirements of new construction projects as well as replacement projects. (Booth C1271)

The next-generation FXV closed-circuit cooling tower (fluid cooler) from Baltimore Aircoil Company efficiently cools a process fluid, such as water, glycols, or oils, in a clean, closed loop. It has been awarded an Honorable Mention 2011 AHR Expo® Innovation Award. The new FXV offers up to 34% higher thermal performance than current designs; low fluid pressure drops; CTI certification; 2009 IBC wind and seismic compliance; and exceeds Standard 90.1. (Booth C563)

Dampers

Continental Fan’s IRIS Damper is built to be ideal for supply and exhaust tracking control, individual comfort control, and any space requiring accurate airflow regulation. Its unique design allows for airflow to be measured and controlled at a single station, saving time and money in initial installation and commissioning, and for those applications requiring air balance on a regular basis. See the IRIS Damper display at the AHR EXPO Booth N3800 or learn more at www.continentalfan.com. (Booth N3800)

Dataloggers

Onset’s HOBO ZW Series is a family of wireless nodes for centralized monitoring of energy use and environmental conditions in buildings. The data nodes reduce the cost and complexity of data collection by measuring, recording, and transmitting real-time energy use and environmental data - from dozens of points - to a central PC. Different from traditional dataloggers, HOBO data nodes work together in a self-healing wireless network to transmit logged data to a PC at regular intervals. This eliminates the need of having to spend time retrieving collected data from individual dataloggers deployed throughout a facility. The wireless nodes can measure temperature, relatively humidity, kilowatt hours, CO2, AC voltage, amps, gauge pressure, and a variety of other parameters. (Booth N3521)

Drives

Taco, Inc. and Schneider Electric collaborated on the development of a new line of commercial VSDs now available at www.taco-hvac.com. Taco’s new Advantage drives combine the manufacturer’s proven pumping technology with Schneider’s VFDs, now complete with Square D enclosures to provide advanced, user-friendly technology. When matched with optimal output of equipment, the drives will deliver more reliable performance and increase productivity while reducing energy costs. Throughout the product line, Advantage drives feature optimal reaction times and complete scalability to match application requirements for speed, size, and protection. (Booth C2401)

Schneider Electric brings its new VSD, the Altivar™ 32, providing a high degree of performance and connectivity by reducing panel space, improving uptime, and maximizing machine performance. With its ultra-slim, book-style design and the ability to directly attach a self-protected disconnect, the Altivar 32 allows users to mount it side-by-side and integrate it into tight spaces, minimizing wiring and machine costs. The drive has certified safety functions for safe power removal, safe limited speed, and safe stopping, as well as integrated decision capabilities, such as input/output (I/O) event logic, counting and timing functions further reduce panel space and wiring costs. (Booth C2269)

Economizers

APC by Schneider Electric will introduce the EcoBreeze™, a modular indirect evaporative and air-to-air heat exchanger cooling solution. The EcoBreeze has the unique ability to switch automatically between air-to-air and indirect evaporative heat exchange to consistently provide cooling to data centers in the most efficient way. The design of the EcoBreeze is able to reduce energy consumption by leveraging temperature differences between outside ambient air compared to IT return air to provide economized cooling to the data center. The EcoBreeze meets ASHRAE 90.1/TC 9.9 requirements for efficiency and economization with multiple frame sizes with varying voltages and phases to address any data center’s cooling needs. (Booth C2269)

Fume Hood Controls

TSI Incorporated will showcase its FHC50 fume hood controller. The FHC50 provides the ultimate in flexibility, safety, and energy savings. Input measurement options include sash sensors, side-wall velocity sensors, and flows from venturi valves, and pressure- or thermal-based flow stations. The FHC50 can control valves or dampers with a fast-acting actuator for containment during sash movements. Versions of the FHC50 are designed to seamlessly integrate to BMS via BACnet, Modbus, LonWorks, or to document alarms and trend data. Visual and audible alarms provide a local indication of unsafe conditions. Additional inputs and outputs make it easy to configure options like remote alarms and unoccupied modes.  (Booth C1569)

Heat Exchangers

GEA PHE Systems’ NX Series plate design allows for a close temperature approach (1ºF) with fewer plates and a single pass. The NX plate heat exchanger can do the same job as an expensive multi-pass design, resulting in less piping and a smaller footprint. It is the perfect product for pressure breakers in high-rise buildings and compatible HVAC applications using low viscosity media. Design features include pressure up to 360 psig (25 bar); design temperature up to 330°F (170°C); flow rates up to and beyond 4,400 gpm (1,000 m3/hour); and 4-, 6-, and 10-in. connection sizes. (Booth C140)

Heat Pumps

Fujitsu General America, Inc. will showcase its new 4 ton, 15.5 SEER Halcyon HFI Hybrid Flex Inverter systems. The system is a cross between VRF (variable refrigerant flow) and multizone technology. The unit is available in 7, 9, 12, 18, and 24,000 Btuh wall-mount units; 9, 12, and 18,000 Btuh cassette units; and 9, 12, 18, and 24,000 Btuh concealed ceiling units - all of which can connect to a single, 4-ton outdoor unit. This allows for as many as eight separate zones and 3,266 combinations. The system provides connectible capacity from 80% to 130%, from 39,000 to 62,000 Btuh, enabling the system to provide 48,000 to different areas of the building when other areas are not in use. (Booth C2010)

Heating

Spectrum Sensors & Controls has developed a new series of printed circuit board (PCB) heater assemblies for use in applications where sensitive electronics need to operate at very cold temperatures, or where electronics need a temperature-controlled environment. Some electronics have a limited operating temperature range, but Spectrum’s heater assemblies allow low temperature operation by heating the device itself or by heating the nearby area. Additionally, some electronics such as diodes and crystals operate much more efficiently in a temperature-controlled environment, and Spectrum’s heater assemblies provide a low-cost way to provide a stable temperature environment. (Booth N5242)

Hot Water Systems

Harsco Industrial Patterson-Kelley introduces domestic hot water systems specifically designed with condensing in mind. Combine MACH® condensing boilers with the new DURATION condensing water heater, in a single package, to provide both hydronic heat and domestic hot water for commercial and institutional buildings. Modular control technology monitors and adjusts boiler firing rate, temperature, and flow between components to ensure the MACH® boiler condenses and runs at peak efficiency. Visit us at AHR Expo Booth #N4132 to learn how to achieve energy savings of 25-37% with condensing water heating systems from Harsco Industrial Patterson-Kelley. (Booth N4132)

Humidification

DRI-STEEM completely redesigned its XT electrode steam humidifier. The new design enhances performance and adds functionality while incorporating DRI STEEM’s industry proven Vapor-logic4 controller. The new line of XT humidifiers has a new look and now includes a 5 lbs/hr (2.3 kg/h) model. New features include capacity range from 5 to 200 lbs/hr (2 to 90 kg/h); durable, corrosion-resistant, stainless steel enclosure with molded ABS doors; integrated Vapor-logic4 controller; menu-based setup with intuitive user interface via keypad or remotely through a network or the web; enhanced performance via automatic software algorithm eliminating the need for users to monitor and adjust drain settings, and more. (Booth C1212)

Infrared Heating

The QT Series Patent Pending design of Detroit Radiant Products’ new unit captures operational benefits of both high- and low-intensity infrared heaters in an aesthetically pleasing, compact, and easy to install unit. Its unique construction features include a multi-burner, multi-exchanger platform optimized for a broad and even heat output pattern that does not produce hot spots. Available in both single- and dual-stage operation, this heater provides application versatility unmatched by traditional infrared solutions. Certified for both indoor and outdoor use, the QT Series is a perfect choice for comfort or spot heat applications. (Booth C721)

A new four-page brochure describing a broad range of 19 infrared radiant straight tube heaters in more than 80 different configurations for custom designed heating systems that more efficiently meet specific needs will be available from Space-Ray. The brochure highlights the features of the Space-Ray LTS Series of Infrared Tube Heaters and include detailed charts, line drawings, and illustrations. Available in both natural and propane gas, the LTS Series infrared tube heaters offer capacities from 40,000 Btuh to 250,000 Btuh. They are well suited for areas with 12-ft or higher ceilings and can be used in straight, L-shape, U-shape, or Z-shape configurations.

Insulation

CertainTeed’s commercial blanket insulation and metal building insulation is available to customers in the Western U.S. SoftTouch Duct Wrap insulation is used to insulate rectangular and round ductwork; when properly installed, this product virtually eliminates condensation problems on cold duct surfaces. Commercial blanket insulation is used where wide rolls of unfaced insulation are required. Metal building insulation is a flexible blanket insulation furnished in rolls then laminated on one side with a suitable vapor retarder. It is used as a thermal and acoustical insulation in the roofs and sidewalls of pre-engineered metal buildings and post frame construction. (Booth N3456)

Lighting Controls

WattStopper’s Digital Lighting Management (DLM) is a suite of plug-together lighting controls designed to scale from individual rooms to whole buildings. Each system includes self-configuring sensors, switches, and components that are designed to save more energy. For building-wide monitoring and management, multiple rooms may be connected to an industry standard open protocol network for control by a segment manager or BAS. Engineered to meet and exceed energy codes, DLM controls are automatically configured for the most energy-efficient sequence of operation. DLM provides an unprecedented return on investment for both new construction and retrofit projects. (Booth N4650)

Motors & Drives-related

Quickly installed without detaching coupled equipment, Electro Static Technology's Split-Ring AEGIS™ bearing protection ring with conductive epoxy mounting protects AC motor bearings from electrical damage, safely grounding shaft currents induced by VFDs. When installed by HVAC service contractors, motor repair shops, and plant maintenance departments, the ring prevents bearing noise, downtime, and costly motor repairs/replacements. (Booth N4826)

Piping & Related

Metraflex will be highlighting a case study involving a pipe-guiding dilemma at a hotel, involving a leak and a group of bent rises on its 6th floor. The company’s Metraloop expansion joints are designed to cut the cost of time, materials, and labor to install pipe guides. Since the Metraloop required no guiding, and exerted no pressure thrust loads, it was the perfect solution, according to the company. (Booth C505)

Portable HVAC

The new MovinCool® CM25 self-contained, ceiling-mounted air conditioner has a total cooling capacity of 25,000 Btuh and a high sensible cooling capacity of 18,900 Btuh. The compact CM25 was specifically designed for server rooms and other spaces with dense heat loads. The unit is only 20 in. high, enabling it to fit above a drop ceiling. A built-in mounting bracket, flanges, and vibration isolators allow easy, low-cost installation using standard, off-the-shelf hardware. No refrigerant connections are required, further reducing costs. The CM25 features an environmentally friendly 14 SEER (seasonal energy efficiency ratio), made possible by an energy-saving, variable-speed inverter compressor and inverter fan motors, as well as R-410A refrigerant and RoHS compliance. (Booth N4032)

PTAC Units

Friedrich Air Conditioning brings its all-new redesigned PTAC/PTHP line for 2011. A two-motor design means quieter performance and a tangential blower wheel improves airflow. The new Friedrich PTAC has three fan speeds and a universal heater/power cord that makes changing the unit’s heat output as simple as plugging in a new power cord. The unit is remote-thermostat ready, antimicrobial filters are top-mounted for quick and easy access, and Diamonblue corrosion protection extends the life of the unit. (Booth C1119)

Pumps

Armstrong’s Intelligent Variable Speed (IVS) pump is designed to meet today’s need for energy-efficient buildings. Unlike most systems, which are programmed for peak demand, the IVS responds quickly to changes in system demand and outputs only the energy a building actually needs at any given time. The resulting energy savings can pay for the initial cost of the pump in less than two years. With huge success to-date, Armstrong is extending the IVS range from 75 hp up to 350 hp. (Booth C1167)

Radiant Heating

For energy efficiency and improved comfort, Superior Radiant Products suggests upgrading old heating systems with the Premier VS-VH high-efficiency radiant heating system. Thermal efficiencies of up to 94%, depending on the configuration, are combined with the well known benefits of radiant heat to maximize fuel savings. The 100% efficient SRP reflector ensures all the infrared is directed where it is needed. The Premier VS-VH complements SRP’s award winning Premier VS with smaller in-series burners to offer great layout flexibility. Now designs can be custom-engineered to best suit the project with long or short, condensing, or non-condensing system options. (Booth C762)

Sensors / Transmitters

Veris Industries CWLP Series is a non-dispersive infrared analyzer (NDIR), is designed to measure CO₂ levels in indoor spaces. With the integrated BACnet® and Modbus protocols the sensors easily connect to a facilities automation system, alerting when CO₂ levels are too high, triggering the system to allow an inflow of fresh air to stabilize the environment. The CO₂ sensors are configurable to multiple baud rates, allowing the data to be transmitted at a sufficient speed for the system, and also feature temperature and the option of humidity sensing, providing more information and maximizing system capacity, and have a measuring range of 0 to 5,000 ppm. (Booth 4751)

The Sherlock Refrigerant Gas Monitoring System from Genesis International was designed to meet the requirements of ANSI/ASHRAE 15-2007 and Mechanical Codes. Sherlock includes monitors with two (2-Series) or three alarm levels (4-Series). Each alarm level has relay outputs for activating audio-visual alarms, energizing exhaust fans or notifying the BAS. Sherlock sensing modules utilize both solid state CMOS, electro-chemical or infrared technologies. (Booth 4547)

Shutoff Device

Assured Automation will bring its FireBag self-actuated gas shut-off device for all gas-fed appliances. These safety devices have been mandated for all gas appliances that use natural gas, propane, and butane gas in various European countries for over 17 years. The FireBag is a passive device that automatically closes the supply of gas in the event of fire, preventing the spread of fire which can lead to gas explosions. The FireBag® thermal-activated shut-off device shuts off gas supply when ambient temperatures reach 212°F. The FireBag’s fusible alloy melts when the outside temperature reaches 203°F to 212°, releasing its plug to completely close the flow of gas. (Booth N4021)

Smoke Detectors

System Sensor InnovairFlex Watertight Duct Smoke Detectors are NEMA 4-rated and built to operate in the most challenging conditions without the need for bulky or costly enclosures. These detectors can operate in airflow speeds from 100 to 4,000 fpm, temperatures from -4°F to 158° and humidity ranges from 0% to 95% (non-condensing). In addition, a watertight, UV-resistant housing provides protection against falling dirt, rain, windblown dust, splashing, and hose-directed water. InnovairFlex watertight models are compatible with all InnovairFlex accessories. (Booth N4420)

Thermostats / Transmitters

In addition to its latest replacement furnace boards and ignition controls, ICM Controls will feature its new fancoil thermostats, at booth #N3032. During the past six months, ICM Controls has introduced six new replacement furnace boards and ignition controls: ICM284, ICM287, ICM289, ICM291, ICM292, and ICM2801. Ten additional replacement heating controls are expected to be released during the 2010-2011 heating season. Each control offers a low-cost alternative to the OEM part, operates with microprocessor-based precision, and is designed for safety, including 100% lockout. The three new fancoil thermostats expand the reach of ICM’s popular SimpleComfort® brand. (Booth N3032)

The new HMW80 low-price humidity/temperature transmitter series from Vaisala offers easy on-step installation, is ideal for HVAC applications, and features a snap-in/snap-out enclosure. Its measurement range is 0% to 100%, with accuracy +3% and temperature range -5°C to +55°C. (Booth N4543)

KMC Controls spotlights its enhanced IP version of its popular FlexStat series of integrated controller/sensors. The new models build upon the original award-winning FlexStat, which feature intelligent sensing (temperature/humidity/occupancy) and BACnet control. Previous models use MS/TP communication within a BACnet system. In addition to the features of the standard MS/TP versions, the new IP FlexStat features also include easy configuration for BACnet over MS/TP, BACnet over Ethernet, BACnet over IP, or BACnet over IP as a Foreign Device (for communicating across the Internet). A modular RJ-45 Ethernet port (instead of connecting via MS/TP screw terminals) simplifies installation. (Booth N4556)

Bacharach’s new GDX-350 low temperature standalone transmitters with B-Smart pre-calibrated sensors provide accurate detection of ammonia (NH3) and carbon dioxide (CO²). GDX-350’s unique design includes programmable heaters for both the sensor and electronics that are automatically activated when temperatures drop below user-selectable temperatures. The GDX-350 has a large LCD that shows gas concentrations and engineering units, as well as the flexibility to show historical data for the previous 30 min. Utilizing the graphic display, users can easily navigate through its menu-driven magnetic keypad to change alarm setpoints, instrument configurations, or enter into maintenance mode for sensor calibration. (Booth C605)

Tools

Fluke Corporation has introduced the Fluke ScopeMeter® 190 Series II handheld portable oscilloscopes, the first four-channel scopes designed for harsh industrial environments. These new portable scopes are the first safety rated for CAT III 1,000 V/CAT IV 600 V environments. The four input channels are fully isolated from each other to perform differential floating measurements, a critical consideration for troubleshooting fixed-installation three-phase power electronic devices like variable-speed motor drives. The Fluke ScopeMeter chassis is sealed from the environment with no cooling slots or fans to expose the instrument, allowing safe use on the factory floor and in the field. (Booth C838)

E Instruments International’s new E8500 combustion analyzer is a complete portable tool for EPA compliance-level emissions monitoring and testing. The E8500 is designed to be ideal for regulatory and maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. (Booth N3825)

Valves

Maxitrol will show its EXA STAR, a highly accurate and precise modulating control valve that enables repeatable process control with minimal hysteresis throughout the entire range of modulation. The EXA STAR valve has a built-in digital controller that provides a seamless interface with a process controller. The valve’s high-fire and low-fire settings are user programmable, and custom output characteristics can be implemented by request. (Booth N4739)

Schneider Electric will showcase its Venta VB-7000 bronze globe valves. The enhanced line features an ultra-tight seal design; double the differential pressure rating at 87 psi; a stronger stem design; and 100:1 rangeability for higher performance.

Ventilation / Ductwork

CertainTeed’s ToughGard 2 Textile Duct Liner is taking on a new name and look. Driven by customer requests, this product now features an aesthetically pleasing deep, rich black fiberglass mat and has been renamed ToughGard® T Textile Duct Liner. (Booth N3456)

Used primarily as an acoustical liner in HVAC sheet metal ducts, ToughGard T Textile Duct Liner helps improve the energy efficiency of a HVAC system by reducing heat gain or loss and minimizes moisture problems due to condensation. Designed as an ideal solution for green building projects, the liner includes 75% recycled content.