When the facilities management staff of Mount Vernon Hospital completed an assessment of its central chilled water plant, it became evident that while the original chillers had served the hospital well since its opening in 1975, they were ready for replacement.
Unprecedented vendor-neutral data has been brought down from the mountain on a digital tablet. That’s helpful for data center designers, but applying a little thought and site-specific consideration can reveal the path to wisdom in areas like failure rate, noise, power draw versus temperatures, and more.
Here are a few interesting things to keep in mind when designing an equipment room. First, these spaces usually take up 7% of the gross floor space when located within the building or on the roof.
Wide temperature swings, submetering deficiencies, bloated carbon footprint … these are but three of the problems tackled in two contrasting projects in the Northwest.
How is variable refrigerant flow (VRF) working for you? We asked a number of people that question and summarized the findings from two typical facilities here.
In this tale of setpoint sleuthing, the team at Slippery Rock University digs hard into the data to discover why and where the old BAS strategy was going wrong. See what the measurements and math turned up for various spaces in terms of culprits and recommendations.
With Hurricane Sandy fresh in our minds, let’s examine the anatomy of a recent outage’s immediate HVAC consequences as a guide toward protecting equipment in the future.
October 29 was a Monday. It was also the day that Hurricane Sandy made landfall in New York City. Around 7 p.m., Con Edison shut power off in Lower Manhattan, and it would be sometime Saturday before lights would begin to flicker back on.
Established in 1879, just three years after Colorado became a state, the Colorado Historical Society had long served as the state’s memory keeper, occupying a number of buildings over the course of its 133-yr history.
Providing high-quality education for our nation’s children in grades K-12 has never been more important than it is today. The world is changing fast, and we need to provide an educational system that prepares them for this fast paced world in which we live.
While active beams are making great strides toward becoming a standard part of the designer’s toolbox, knowing when to deploy them is a critical judgment. The author focuses his considerable experience with them into a good look at related thermal comfort considerations. Operation and controls, two- and four-pipe systems, and condensation control strategies round out a worthwhile look at how active beams can work for you.